Subversion Repositories openrisc

//==========================================================================

//

//        panel_support.c

//

//        Cirrus Logic EDB7xxx eval board LCD touch panel support code

//

//==========================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//==========================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):     gthomas

// Contributors:  gthomas

// Date:          1999-09-13

// Description:   Tool used to support the LCD touch panel

//####DESCRIPTIONEND####

static char lcd_panel_server_stack[STACK_SIZE];

static cyg_thread lcd_panel_server_thread_data;

static cyg_handle_t lcd_panel_server_thread_handle;

static cyg_interrupt lcd_panel_interrupt;

static cyg_handle_t  lcd_panel_interrupt_handle;

static cyg_mbox      lcd_panel_events_mbox;

static cyg_handle_t  lcd_panel_events_mbox_handle;

static cyg_sem_t     lcd_panel_sem;

#define SYNCIO_TXFRMEN     (1<<14)

#define SYNCIO_FRAMELEN(n) (n<<8)

#define ADC_START          (1<<7)

#define ADC_CHAN(n)        (n<<4)

#define ADC_UNIPOLAR       (1<<3)

#define ADC_SINGLE         (1<<2)

#define ADC_EXT_CLOCK      (3<<0)

#define TOUCH_CTL          KBD_PORT

// FUNCTIONS

static cyg_uint32

adc_sample(int chan)

{

    cyg_uint32 val;

    *(volatile cyg_uint32 *)SYNCIO = SYNCIO_TXFRMEN | SYNCIO_FRAMELEN(24) |

        ADC_START | ADC_CHAN(chan) | ADC_UNIPOLAR | ADC_SINGLE | ADC_EXT_CLOCK;

    while (*(volatile cyg_uint32 *)SYSFLG1 & SYSFLG1_SSIBUSY) ;

    val = *(volatile cyg_uint32 *)SYNCIO;

    return (val & 0xFFFF);

}

static void

panel_delay(void)

{

    volatile int i;

    for (i = 0;  i < 800;  i++) ;

}

// This ISR is called when the touch panel interrupt occurs

static int

lcd_panel_isr(cyg_vector_t vector, cyg_addrword_t data, HAL_SavedRegisters *regs)

{

    cyg_drv_interrupt_mask(CYGNUM_HAL_INTERRUPT_EINT2);

    return (CYG_ISR_HANDLED|CYG_ISR_CALL_DSR);  // Run the DSR

}

// This DSR starts up the touch panel [logical] processing

static void

lcd_panel_dsr(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)

{

    // Tell the panel processing thread to give it a shot

    cyg_semaphore_post(&lcd_panel_sem);

}

// Assumption: if the keypress vanishes for 5*20 ms, it probably isn't there

#define LCD_PANEL_TIMEOUT 5

static __inline__ int

abs(int x)

{

    if (x < 0) return -x;

    return x;

}

static void

lcd_panel_server(cyg_addrword_t p)

{

    int iX, iY, newX, newY, diffX, diffY, timeout, samples;

    cyg_uint32 event;

    diag_printf("LCD panel server here\n");

    while (TRUE) {

        cyg_semaphore_wait(&lcd_panel_sem);

        samples = 0;  iX = 0;  iY = 0;

        // Wait for press to go away (no drag support)

        timeout = 0;

        while (timeout < LCD_PANEL_TIMEOUT) {

            *(volatile cyg_uint8 *)TOUCH_CTL = 0x00;  // Disable drives

            while (*(volatile cyg_uint32 *)INTSR1 & INTSR1_EINT2) ;

            *(volatile cyg_uint8 *)TOUCH_CTL = 0x70;  // Idle state (so interrupt works)

            cyg_thread_delay(2);  // Wait 20 ms

            if (*(volatile cyg_uint32 *)INTSR1 & INTSR1_EINT2) {

                // Still pressed

                // Drive TSPY, ground TSMY, and disconnect TSPX and TSMX

                *(volatile cyg_uint8 *)TOUCH_CTL = 0x50;

                panel_delay();

                newY = adc_sample(2);

                // Drive TSPX, ground TSMX, and disconnect TSPY and TSMY

                *(volatile cyg_uint8 *)TOUCH_CTL = 0xA0;

                panel_delay();

                newX = adc_sample(7);

#if 0

                diag_printf("timeout: %d, ISR: %x, newX: %d, newY: %d\n",

                            timeout, *(volatile cyg_uint32 *)INTSR1, newX, newY);

#endif

                // See if this sample makes any sense

                if (samples) {

                    diffX = abs(iX/samples - newX);

                    diffY = abs(iY/samples - newY);

                    if ((diffX <= ((iX/samples)/4)) &&

                        (diffY <= ((iY/samples)/4))) {

                        samples++;

                        iX += newX;

                        iY += newY;

                    } else {

#if 0

                        diag_printf("Discard - newX: %d, X: %d, newY: %d, Y: %d\n",

                                    newX, iX/samples, newY, iY/samples);

#endif

                        break;

                    }

                } else {

                    iX = newX;

                    iY = newY;

                    samples = 1;

                }

                timeout = 0;

            } else {

                timeout++;

            }

        }

        if (samples) {

            // Send event to user level

            event = (iX/samples)<<16 | (iY/samples);

            if (!cyg_mbox_tryput(lcd_panel_events_mbox_handle, (void *)event)) {

                diag_printf("LCD event lost: %x\n", event);

            }

        }

        *(volatile cyg_uint8 *)TOUCH_CTL = 0x00;  // Disable drives

        while (*(volatile cyg_uint32 *)INTSR1 & INTSR1_EINT2) ;

        *(volatile cyg_uint8 *)TOUCH_CTL = 0x70;  // Idle state (so interrupt works)

        cyg_thread_delay(10);

        cyg_drv_interrupt_unmask(CYGNUM_HAL_INTERRUPT_EINT2);

    }

}

static void

lcd_panel_init(void)

{

    // Enable touch panel

    *(volatile cyg_uint8 *)PEDR   |= 0x04;

    // Idle state (so interrupt works)

    *(volatile cyg_uint8 *)TOUCH_CTL = 0x70;

    // Enable ADC machinery

    *(volatile cyg_uint32 *)SYSCON1 |= SYSCON1_ADC_CLOCK_128kHZ;

    cyg_drv_interrupt_create(CYGNUM_HAL_INTERRUPT_EINT2,

                             99,                     // Priority - what goes here?

                             0,                      //  Data item passed to interrupt handler

                             lcd_panel_isr,

                             lcd_panel_dsr,

                             &lcd_panel_interrupt_handle,

                             &lcd_panel_interrupt);

    cyg_drv_interrupt_attach(lcd_panel_interrupt_handle);

    cyg_drv_interrupt_acknowledge(CYGNUM_HAL_INTERRUPT_EINT2);

    cyg_drv_interrupt_unmask(CYGNUM_HAL_INTERRUPT_EINT2);

    // Set up the mbox for panel data

    cyg_mbox_create(&lcd_panel_events_mbox_handle, &lcd_panel_events_mbox);

    // This semaphore is set when there is a touch

    cyg_semaphore_init(&lcd_panel_sem, 0);

    // Create a thread whose job it is to de-bounce the keyboard and

    // actually process the input, turning it into a series of events

    cyg_thread_create(10,                           // Priority - just a number

                      lcd_panel_server,             // entry

                      0,                            // initial parameter

                      "LCD_PANEL_server",           // Name

                      &lcd_panel_server_stack[0],   // Stack

                      STACK_SIZE,                   // Size

                      &lcd_panel_server_thread_handle,    // Handle

                      &lcd_panel_server_thread_data       // Thread data structure

            );

    cyg_thread_resume(lcd_panel_server_thread_handle);  // Start it

}