Subversion Repositories openrisc

//==========================================================================

//

//      cerfpda_misc.c

//

//      HAL misc board support code for StrongARM SA1110/Cerf

//

//==========================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//==========================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):    gthomas

// Contributors: hmt

//               Travis C. Furrer <furrer@mit.edu>

// Date:         2000-05-21

// Purpose:      HAL board support

// Description:  Implementations of HAL board interfaces

//

//####DESCRIPTIONEND####

//

//========================================================================*/

#include <pkgconf/hal.h>

#include <pkgconf/system.h>

#include CYGBLD_HAL_PLATFORM_H

#include <cyg/infra/cyg_type.h>         // base types

#include <cyg/infra/cyg_trac.h>         // tracing macros

#include <cyg/infra/cyg_ass.h>          // assertion macros

#include <cyg/hal/hal_io.h>             // IO macros

#include <cyg/hal/hal_arch.h>           // Register state info

#include <cyg/hal/hal_diag.h>

#include <cyg/hal/hal_intr.h>           // Interrupt names

#include <cyg/hal/hal_cache.h>

#include <cyg/hal/hal_sa11x0.h>         // Hardware definitions

#include <cyg/hal/cerfpda.h>            // Platform specifics

#include <cyg/infra/diag.h>             // diag_printf

// All the MM table layout is here:

#include <cyg/hal/hal_mm.h>

#include <string.h> // memset

void

hal_mmu_init(void)

{

    unsigned long ttb_base = SA11X0_RAM_BANK0_BASE + 0x4000;

    unsigned long i;

    /*

     * Set the TTB register

     */

    asm volatile ("mcr  p15,0,%0,c2,c0,0" : : "r"(ttb_base) /*:*/);

    /*

     * Set the Domain Access Control Register

     */

    i = ARM_ACCESS_DACR_DEFAULT;

    asm volatile ("mcr  p15,0,%0,c3,c0,0" : : "r"(i) /*:*/);

    /*

     * First clear all TT entries - ie Set them to Faulting

     */

    memset((void *)ttb_base, 0, ARM_FIRST_LEVEL_PAGE_TABLE_SIZE);

    /*               Actual  Virtual  Size   Attributes                                                    Function  */

    /*               Base     Base     MB      cached?           buffered?        access permissions                 */

    /*             xxx00000  xxx00000                                                                                */

    X_ARM_MMU_SECTION(0x000,  0x500,    32,  ARM_CACHEABLE,   ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* Boot flash ROMspace */

    X_ARM_MMU_SECTION(0x080,  0xf00,    16,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* Ethernet Adaptor */

    X_ARM_MMU_SECTION(0x100,  0x100,   512,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* Board Registers */

    X_ARM_MMU_SECTION(0x200,  0x200,   512,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* PCMCIA Socket A */

    X_ARM_MMU_SECTION(0x300,  0x300,   512,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* PCMCIA Sockets B */

    X_ARM_MMU_SECTION(0x800,  0x800, 0x400,  ARM_UNCACHEABLE, ARM_UNBUFFERABLE, ARM_ACCESS_PERM_RW_RW); /* StrongARM(R) Registers */

    X_ARM_MMU_SECTION(0xC00,  0x000,    64,  ARM_UNCACHEABLE, ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* DRAM Bank 0 */

    X_ARM_MMU_SECTION(0xC00,  0xC00,    64,  ARM_UNCACHEABLE, ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* DRAM Bank 0 */

    X_ARM_MMU_SECTION(0xE00,  0xE00,   128,  ARM_CACHEABLE,   ARM_BUFFERABLE,   ARM_ACCESS_PERM_RW_RW); /* Zeros (Cache Clean) Bank */

}

//

// Board control register support

//   Update the board control register (write only).  Only the bits

// specified by 'mask' are changed to 'value'.

//

void

cerfpda_BCR(unsigned long mask, unsigned long value)

{

    _cerfpda_BCR = (_cerfpda_BCR & ~mask) | (mask & value);

    *SA1110_BOARD_CONTROL = _cerfpda_BCR;

}

//

// Platform specific initialization

//

void

plf_hardware_init(void)

{

    // Force "alternate" use of GPIO pins used for LCD screen

    *SA11X0_GPIO_ALTERNATE_FUNCTION |= 0x080003FC;  // Bits 2..9

    *SA11X0_GPIO_PIN_DIRECTION |= 0x080003FC;  // Bits 2..9

    *SA11X0_GPIO_PIN_OUTPUT_CLEAR = 0x080003FC;  // Bits 2..9

    *SA11X0_GPIO_PIN_OUTPUT_SET = 0x08000000;  // CRYSTAL WAKEUP(GPIO27)

    // Toggle A0 connected to the SBHE line on the Crystal chip.

    *(char*)(0x20000000) = 1;

    *(char*)(0x20000001) = 2;

    *(char*)(0x20000000) = 3;

    *(char*)(0x20000001) = 0;

    // Configure the ethernet GPIO interrupt to rising-edge

    HAL_INTERRUPT_CONFIGURE(SA1110_IRQ_GPIO_ETH, 0, 1);

    // Configure the 16x5x GPIO interrupt to rising-edge

    HAL_INTERRUPT_CONFIGURE(SA1110_IRQ_GPIO_16X5X, 0, 1);

}

#include CYGHWR_MEMORY_LAYOUT_H

typedef void code_fun(void);

void cerfpda_program_new_stack(void *func)

{

    register CYG_ADDRESS stack_ptr asm("sp");

    register CYG_ADDRESS old_stack asm("r4");

    register code_fun *new_func asm("r0");

    old_stack = stack_ptr;

    stack_ptr = CYGMEM_REGION_ram + CYGMEM_REGION_ram_SIZE - sizeof(CYG_ADDRESS);

    new_func = (code_fun*)func;

    new_func();

    stack_ptr = old_stack;

    return;

}

// ------------------------------------------------------------------------

// EOF cerfpda_misc.c