Subversion Repositories openrisc_me

#ifndef CYGONCE_HAL_PLATFORM_SETUP_H

#define CYGONCE_HAL_PLATFORM_SETUP_H

/*=============================================================================

//

//      hal_platform_setup.h

//

//      Platform specific support for HAL (assembly code)

//

//=============================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//=============================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):    gthomas

// Contributors: gthomas, dmoseley

//               Travis C. Furrer <furrer@mit.edu>

// Date:         2000-05-08

// Purpose:      Intel SA1100 Multimedia platform specific support routines

// Description:

// Usage:        #include <cyg/hal/hal_platform_setup.h>

//     This file should only be used by "vectors.S"

//

//####DESCRIPTIONEND####

//

//===========================================================================*/

#include <pkgconf/system.h>             // System-wide configuration info

#include CYGBLD_HAL_PLATFORM_H          // Platform specific configuration

#include <cyg/hal/hal_sa11x0.h>         // Platform specific hardware definitions

#include <cyg/hal/hal_mmu.h>            // MMU definitions

#if defined(CYG_HAL_STARTUP_ROM)

#define PLATFORM_SETUP1 _platform_setup1

#define CYGHWR_HAL_ARM_HAS_MMU

#if (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 59000)

#define SA11X0_PLL_CLOCK 0x0        

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 73700)

#define SA11X0_PLL_CLOCK 0x1

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 88500)

#define SA11X0_PLL_CLOCK 0x2        

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 103200) 

#define SA11X0_PLL_CLOCK 0x3        

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 118000)

#define SA11X0_PLL_CLOCK 0x4        

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 132700)

#define SA11X0_PLL_CLOCK 0x5        

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 147500)

#define SA11X0_PLL_CLOCK 0x6        

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 162200)

#define SA11X0_PLL_CLOCK 0x7        

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 176900)

#define SA11X0_PLL_CLOCK 0x8        

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 191700)

#define SA11X0_PLL_CLOCK 0x9        

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 206400)

#define SA11X0_PLL_CLOCK 0xA        

#elif (CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK == 221200)

#define SA11X0_PLL_CLOCK 0xB        

#else

#error Invalid processor clock speed

#endif

// This function is called very early on by the boot ROM (or by any ROM

// based startup).  It's job is to initialize the hardware to a known state

// so that eCos applications can execute properly.

// This version of the code is patterned after the contribution from

// Travis Furer (@MIT)                

// Define macro used to diddle the LEDs during early initialization.

// Can use r0+r1.  Argument in \x.

#define CYGHWR_LED_MACRO _set_LEDS \x

// Initialize GPIOs

#define GPIO_GRER (SA11X0_GPIO_RISING_EDGE_DETECT-SA11X0_GPIO_PIN_LEVEL)

#define GPIO_GFER (SA11X0_GPIO_FALLING_EDGE_DETECT-SA11X0_GPIO_PIN_LEVEL)

#define GPIO_GAFR (SA11X0_GPIO_ALTERNATE_FUNCTION-SA11X0_GPIO_PIN_LEVEL)

#define GPIO_GEDR (SA11X0_GPIO_EDGE_DETECT_STATUS-SA11X0_GPIO_PIN_LEVEL)

#define GPIO_GPDR (SA11X0_GPIO_PIN_DIRECTION-SA11X0_GPIO_PIN_LEVEL)

#define GPIO_GPCR (SA11X0_GPIO_PIN_OUTPUT_CLEAR-SA11X0_GPIO_PIN_LEVEL)

        .macro  _init_GPIO

        ldr     r1,=SA11X0_GPIO_PIN_LEVEL

        mov     r0,#0           

        str     r0,[r1,#GPIO_GRER]      // Disable rising edge detects

        str     r0,[r1,#GPIO_GFER]      // Disable falling edge detects

        str     r0,[r1,#GPIO_GAFR]      // No alt. funcs. during init

        sub     r0,r0,#1        

        str     r0,[r1,#GPIO_GPCR]      // Force all outputs to low

        str     r0,[r1,#GPIO_GEDR]      // Clear edge detect status

        ldr     r0,=0x00100300

        str     r0,[r1,#GPIO_GPDR]      // Only LEDs outputs (for now)

        .endm

#define DISCRETE_LED_REG_BASE     0x18800000

#define KEYPAD_IO_O               0x4

#define DISCRETE_LED_O            0x6

#define HEX_LED_REG_BASE          0x18c00000

#define HEX_LED_O                 0x0

#define HEX_DATA_MASK             0x0F

#define HEX_LED_0_STROBE          0x10

#define HEX_LED_1_STROBE          0x20

#define HEX_LED_BOTH_STROBES      (HEX_LED_0_STROBE | HEX_LED_1_STROBE)

// Display value on hex LED display

        .macro  _set_LEDS,val

        ldr     r1, =HEX_LED_REG_BASE

        ldr     r2, =\val

        and     r2, r2, #0xf

        orr     r0, r2, #HEX_LED_0_STROBE

        str     r0, [r1, #HEX_LED_O]

        ldr     r2, =\val

        mov     r2, r2, LSR #4

        orr     r0, r2, #HEX_LED_1_STROBE

        str     r0, [r1, #HEX_LED_O]

        nop

        .endm

// Initialize HEX display.

        .macro  _init_HEX_DISPLAY

        ldr     r1, =DISCRETE_LED_REG_BASE

        ldr     r2, =~0

        str     r2, [r1, #KEYPAD_IO_O]

        str     r2, [r1, #DISCRETE_LED_O]

        _set_LEDS 0x23

        .endm

// Setup pin directions:

//  inputs: all serial receive pins

// outputs: all LCD pins, all serial transmit pins

        .macro  _init_PERIPHERAL_PINS

        ldr     r0,=0x00355FFF

        ldr     r1,=SA11X0_PPC_PIN_DIRECTION

        str     r0,[r1]

        mov     r0,#0                           // Force initial state

        ldr     r1,=SA11X0_PPC_PIN_STATE

        str     r0,[r1]

        ldr     r1,=SA11X0_PPC_PIN_ASSIGNMENT   // Disable any reassignments

        str     r0,[r1]

        .endm

// Set core frequency (this can take up to 150us)        

        .macro  _set_CLOCK_FREQUENCY

        mov     r0,#SA11X0_PLL_CLOCK

        ldr     r1,=SA11X0_PWR_MGR_PLL_CONFIG

        str     r0,[r1]

        .endm

// Enable clock switching (must be done after setting core frequency)

        .macro  _enable_CLOCK_SWITCHING

        mcr     p15,0,r1,c15,c1,2

        .endm

// Initialize memory interfaces. (ROM, SRAM, Flash, DRAM, etc)

//

// SA1100 Multimedia memory is as follows:

//   ROM     128K (assuming 32 bit accesses)

//   Flash   4M (assuming 32 bit accesses)

//   RAM     8M

//

// From SA11X0 Manual, Section 10.7.1:

//

//  The following flow should be followed when coming out of

//  reset, whether for sleep or power-up:

//

//    - Read boot ROM and write to memory configuration

//      registers, but do not enable DRAM banks.

//

//    - If necessary, finish any DRAM power-up wait period

//      (usually about 100us).

//

//    - If coming out of sleep, see Section 9.5, Power

//      Manager on page 9-26 on how to release the nCAS and

//      nRAS pins from their self-refresh state.

//

//    - If coming out of sleep, wait the DRAM-specific

//      post-self-refresh precharge period before issuing

//      a new DRAM transaction.

//

//    - If power-on reset, perform the number of

//      initialization refreshes required by the specific

//      DRAM part by reading disabled banks. A read from

//      any disabled bank will refresh all four banks.

//

//    - Enable DRAM banks by setting MDCNFG:DE3:0.

//

#define DRAM_CONFIG_VALUE      (SA11X0_DRAM_REFRESH_INTERVAL(312)              | \

                                SA11X0_DATA_INPUT_LATCH_CAS_PLUS_THREE         | \

                                SA11X0_DRAM_CAS_BEFORE_RAS(5)                  | \

                                SA11X0_DRAM_RAS_PRECHARGE(4)                   | \

                                SA11X0_DRAM_CLOCK_CPU_CLOCK                    | \

                                SA11X0_DRAM_ROW_ADDRESS_BITS_11                | \

                                SA11X0_DRAM_BANK_0_ENABLED                     | \

                                SA11X0_DRAM_BANK_1_DISABLED                    | \

                                SA11X0_DRAM_BANK_2_DISABLED                    | \

                                SA11X0_DRAM_BANK_3_DISABLED)

#define DRAM_CAS0_WAVEFORM     0xF0F0F00F

#define DRAM_CAS1_WAVEFORM     0XF0F0F0F0

#define DRAM_CAS2_WAVEFORM     0xFFFFFFF0

#define BANK_0_CONTROL_VALUE   SA11X0_STATIC_ROM_TYPE_FLASH                    | \

                               SA11X0_STATIC_ROM_BUS_WIDTH_16_BITS             | \

                               SA11X0_STATIC_ROM_DELAY_FIRST_ACCESS(0x1F)      | \

                               SA11X0_STATIC_ROM_DELAY_NEXT_ACCESS(0x1F)       | \

                               SA11X0_STATIC_ROM_RECOVERY(0x7)

#define BANK_1_CONTROL_VALUE   SA11X0_STATIC_ROM_TYPE_FLASH                    | \

                               SA11X0_STATIC_ROM_BUS_WIDTH_32_BITS             | \

                               SA11X0_STATIC_ROM_DELAY_FIRST_ACCESS(0x1F)      | \

                               SA11X0_STATIC_ROM_DELAY_NEXT_ACCESS(0x1F)       | \

                               SA11X0_STATIC_ROM_RECOVERY(0x7)

#define STATIC_CONTROL_0_VALUE (SA11X0_STATIC_ROM_BANK_0(BANK_0_CONTROL_VALUE) | \

                                SA11X0_STATIC_ROM_BANK_1(BANK_1_CONTROL_VALUE))

#define BANK_2_CONTROL_VALUE   SA11X0_STATIC_ROM_TYPE_FLASH                    | \

                               SA11X0_STATIC_ROM_BUS_WIDTH_16_BITS             | \

                               SA11X0_STATIC_ROM_DELAY_FIRST_ACCESS(0x1F)      | \

                               SA11X0_STATIC_ROM_DELAY_NEXT_ACCESS(0x1F)       | \

                               SA11X0_STATIC_ROM_RECOVERY(0x7)

#define BANK_3_CONTROL_VALUE   SA11X0_STATIC_ROM_TYPE_FLASH                    | \

                               SA11X0_STATIC_ROM_BUS_WIDTH_32_BITS             | \

                               SA11X0_STATIC_ROM_DELAY_FIRST_ACCESS(0x1F)      | \

                               SA11X0_STATIC_ROM_DELAY_NEXT_ACCESS(0x1F)       | \

                               SA11X0_STATIC_ROM_RECOVERY(0x7)

#define STATIC_CONTROL_1_VALUE (SA11X0_STATIC_ROM_BANK_2(BANK_2_CONTROL_VALUE) | \

                                SA11X0_STATIC_ROM_BANK_3(BANK_3_CONTROL_VALUE))

        .macro  _init_MEM_INTERFACES

        /*

         * Initialize the DRAM Controller

         */

        ldr     r0, =SA11X0_DRAM_CONFIGURATION

        ldr     r1, =DRAM_CONFIG_VALUE

        str     r1, [r0]

        ldr     r0, =SA11X0_DRAM0_CAS_0

        ldr     r1, =DRAM_CAS0_WAVEFORM

        str     r1, [r0]

        ldr     r0, =SA11X0_DRAM0_CAS_1

        ldr     r1, =DRAM_CAS1_WAVEFORM

        str     r1, [r0]

        ldr     r0, =SA11X0_DRAM0_CAS_2

        ldr     r1, =DRAM_CAS2_WAVEFORM

        str     r1, [r0]

        ldr     r0, =SA11X0_STATIC_CONTROL_0

        /*

         * Get the reset ROM setup

         */

        ldr     r1, [r0]

        /*

         * Get the 16/32 bit setting to merge into the appropriate

         * register values later on.

         */

        and     r1, r1, #SA11X0_STATIC_ROM_BUS_WIDTH_MASK

        /*

         * MSC0 - bank 0 ROM, bank 1 FLASH

         */

        ldr     r2, =STATIC_CONTROL_0_VALUE

        orr     r1, r1, r2

        str     r1, [r0]

        /*

         * MSC1 - bank 2 SRAM, bank 3 REG

         */

        ldr     r0, =SA11X0_STATIC_CONTROL_1

        ldr     r1, =STATIC_CONTROL_1_VALUE

        str     r1, [r0]

        /*

         * Delay to let the DRAM warm up

         */

        ldr     r0, =0x200

0:      subs    r0, r0, #1

        bne     0b

        .endm

        .macro  _platform_setup1

        nop

        nop

        nop

        nop

        nop

        nop

        nop

        nop

        nop

        _init_GPIO

        _init_HEX_DISPLAY               /* this is flaky sometimes */

        _init_HEX_DISPLAY               /* so do it twice just in case */

        _set_LEDS 0x15

        _init_PERIPHERAL_PINS

        _set_LEDS 0x13

        _set_CLOCK_FREQUENCY

        _enable_CLOCK_SWITCHING

        _set_LEDS 0x12

        _init_MEM_INTERFACES

        _set_LEDS 0x11

        // Set up a stack [for calling C code]

        ldr     r1,=__startup_stack

        ldr     r2,=SA11X0_RAM_BANK0_BASE

        orr     sp,r1,r2

        // Create MMU tables

        bl      hal_mmu_init

        _set_LEDS 0x09

        // Enable MMU

        ldr     r2,=10f

        ldr     r1,=MMU_Control_Init|MMU_Control_M

        mcr     MMU_CP,0,r1,MMU_Control,c0

        mov     pc,r2    /* Change address spaces */

        nop

        nop

        nop

10:

        _set_LEDS 0x08

        .endm

#else // STARTUP_ROM        

#define PLATFORM_SETUP1

#endif

/*---------------------------------------------------------------------------*/

/* end of hal_platform_setup.h                                               */

#endif /* CYGONCE_HAL_PLATFORM_SETUP_H */