Subversion Repositories openrisc_me

# ====================================================================

#

#      hal.cdl

#

#      HAL configuration data

#

# ====================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

## Copyright (C) 2002 Gary Thomas

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

# ====================================================================

######DESCRIPTIONBEGIN####

#

# Author(s):      bartv

# Original data:  nickg,jskov,jlarmour

# Contributors:   dmoseley

# Date:           1999-06-13

#

#####DESCRIPTIONEND####

#

# ====================================================================

cdl_package CYGPKG_HAL {

    display       "eCos HAL"

    include_dir   cyg/hal

    description   "

        The eCos HAL package provide a porting layer for

        higher-level parts of the system such as the kernel and the

        C library. Each installation should have HAL packages for

        one or more architectures, and for each architecture there

        may be one or more supported platforms. It is necessary to

        select one target architecture and one platform for that

        architecture. There are also a number of configuration

        options that are common to all HAL packages."

    doc           ref/the-ecos-hardware-abstraction-layer.html

    compile       drv_api.c

    compile       -library=libextras.a dummy.c

    requires      CYGPKG_INFRA

    make -priority 250 {

        /lib/extras.o: /lib/libextras.a

        $(CC) $(CFLAGS) -nostdlib -Wl,-r -Wl,--whole-archive -o $@ $<

    }

    cdl_component CYGPKG_HAL_COMMON {

        display       "Platform-independent HAL options"

        flavor        none

        description   "

            A number of configuration options are common to most or all

            HAL packages, for example options controlling how much state

            should be saved during a context switch. The implementations

            of these options will vary from architecture to architecture."

        script        common.cdl

    }

    cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {

        display       "HAL interrupt handling"

        flavor        none

        description   "

            A number of configuration options related to interrupt

            handling are common to most or all HAL packages, even though

            the implementations will vary from architecture to

            architecture."

        script        interrupts.cdl

    }

    cdl_component CYGPKG_HAL_COMMON_CONTEXT {

        display       "HAL context switch support"

        flavor        none

        description   "

            A number of configuration options related to thread contexts

            are common to most or all HAL packages, even though the

            implementations will vary from architecture to architecture."

        cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {

            display       "Use minimum thread context"

            parent        CYGPKG_HAL_COMMON_CONTEXT

            default_value 1

            description   "

                The thread context switch code can exploit the calling

                conventions defined for a given architecture to reduce the

                amount of state that has to be saved during a context

                switch. Generally this improves performance and reduces

                code size. However it can make source-level debugging more

                difficult."

        }

    }

    cdl_component CYGPKG_HAL_CACHE_CONTROL {

        display       "Explicit control over cache behaviour"

        flavor        none

        no_define

        description   "

            These options let the default behaviour of the caches

            be easily configurable."

        cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {

            display       "Enable DATA cache on startup"

            default_value 1

            description   "

                Enabling this option will cause the data cache to be enabled

                as soon as practicable when eCos starts up.  One would choose

                to disable this if the data cache cannot safely be turned on,

                such as a case where the cache(s) require additional platform

                specific setup."

            cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {

                display       "DATA cache mode on startup"

                flavor        data

                legal_values  { "COPYBACK" "WRITETHRU" }

                default_value { "COPYBACK" }

                description   "

                    This option controls the mode the cache will be set to

                when enabled on startup."

            }

        }

        cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {

            display       "Enable INSTRUCTION cache on startup"

            default_value 1

            description   "

                Enabling this option will cause the instruction cache to be enabled

                as soon as practicable when eCos starts up.  One would choose

                to disable this if the instruction cache cannot safely be turned on,

                such as a case where the cache(s) require additional platform

                specific setup."

        }

    }

    cdl_component CYGPKG_HAL_DEBUG {

        display       "Source-level debugging support"

        flavor        none

        description   "

            If the source level debugger gdb is to be used for debugging

            application code then it may be necessary to configure in support

            for this in the HAL."

        script        debugging.cdl

    }

    cdl_component CYGPKG_HAL_ROM_MONITOR {

        display       "ROM monitor support"

        flavor        none

        no_define

        description   "

            Support for ROM monitors can be built in to your application.

            It may also be relevant to build your application as a ROM monitor

            itself. Such options are contained here if relevant for your chosen

            platform. The options and ROM monitors available to choose are

            platform-dependent."

        cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {

            display "Target has virtual vector support"

            no_define

        }

        cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {

            display     "Target supports baud rate control via vectors"

            no_define

            description "

                Whether this target supports the __COMMCTL_GETBAUD

                and __COMMCTL_SETBAUD virtual vector comm control operations."

        }

        cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {

            display     "Enable use of virtual vector calling interface"

            active_if   CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT

            calculated  1

            description "

                Virtual vector support allows the HAL to let the ROM

                monitor handle certain operations. The virtual vector table

                defines a calling interface between applications running in

                RAM and the ROM monitor."

            compile     hal_if.c hal_misc.c

            cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {

                display       "Inherit console settings from ROM monitor"

                active_if     CYGSEM_HAL_USE_ROM_MONITOR

                default_value { !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS }

                description   "

                    When this option is set, the application will inherit

                    the console as set up by the ROM monitor. This means

                    that the application will use whatever channel and

                    mangling style was used by the ROM monitor when

                    the application was launched."

            }

            cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {

                display       "Debug channel is configurable"

                calculated    { CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS }

                description   "

                    This option is a configuration hint - it is enabled

                    when the HAL initialization code will make use

                    of the debug channel configuration option."

            }

            cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {

                display       "Console channel is configurable"

                calculated    { !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE \

                                && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN }

                description   "

                    This option is a configuration hint - it is enabled

                    when the HAL initialization code will make use

                    of the console channel configuration option."

            }

            cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {

                display       "Initialize whole of virtual vector table"

                default_value { CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR }

                requires CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET

                requires CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US

                requires CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE

                requires CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA

                requires CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS

                description   "

                    This option will cause the whole of the virtual

                    vector table to be initialized with dummy values on

                    startup. When this option is enabled, all the

                    options below must also be enabled - or the

                    table would be empty when the application

                    launches.

                    On targets where older ROM monitors without

                    virtual vector support may still be in use, it is

                    necessary for RAM applictions to initialize the

                    table (since all HAL diagnostics and debug IO

                    happens via the table)."

            }

            cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {

                display       "Claim virtual vector table entries by default"

                active_if     !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE

                default_value 1

                description "

                    By default most virtual vectors will be claimed by

                    RAM startup configurations, meaning that the RAM

                    application will provide the services. The

                    exception is COMMS support (HAL

                    diagnostics/debugging IO) which is left in the

                    control of the ROM monitor.

                    The reasoning behind this is to get as much of the

                    code exercised during regular development so it

                    is known to be working the few times a new ROM

                    monitor or a ROM production configuration is used

                    - COMMS are excluded only by necessity in order to

                    avoid breaking an existing debugger connections

                    (there may be ways around this).

                    For production RAM configurations this option can

                    be switched off, causing the appliction to rely on

                    the ROM monitor for these services, thus

                    saving some space.

                    Individual vectors may also be left unclaimed,

                    controlled by the below options (meaning that the

                    associated service provided by the ROM monitor

                    will be used)."

            }

            cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {

                display       "Claim reset virtual vectors"

                default_value { CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE \

                                || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT }

                description   "

                    This option will cause the reset and kill_by_reset

                    virtual vectors to be claimed."

            }

            cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {

                display       "Claim version virtual vectors"

                default_value { CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE }

                description   "

                    This option will cause the version

                    virtual vectors to be claimed."

            }

            cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {

                display       "Claim delay_us virtual vector"

                default_value { CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE \

                                || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT }

                description   "

                    This option will cause the delay_us

                    virtual vector to be claimed."

            }

            cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {

                display       "Claim cache virtual vectors"

                default_value { CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE \

                                || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT }

                description   "

                    This option will cause the cache virtual vectors

                    to be claimed."

            }

            cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {

                display       "Claim data virtual vectors"

                default_value { CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE \

                                || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT }

                description   "

                    This option will cause the data virtual vectors

                    to be claimed. At present there is only one, used

                    by the RedBoot ethernet driver to share diag output."

            }

            cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {

                display       "Claim comms virtual vectors"

                default_value { CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE \

                                || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS }

                description   "

                    This option will cause the communication tables

                    that are part of the virtual vectors mechanism to

                    be claimed. Note that doing this may cause an

                    existing ROM monitor communication connection to

                    be closed. For this reason, the option is disabled

                    per default for normal application

                    configurations."

            }

            cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {

                display       "Do diagnostic IO via virtual vector table"

                calculated    1

                description   "

                    All HAL IO happens via the virtual vector table / comm

                    tables when those tables are supported by the HAL.

                    If so desired, the low-level IO functions can

                    still be provided by the RAM application by

                    enabling the CLAIM_COMMS option."

            }

        }

        cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {

            display "Build common GDB stub ROM image"

            default_value 0

            parent  CYGBLD_GLOBAL_OPTIONS

            requires CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS

            no_define

            description "

                Unless a target board has specific requirements to the

                stub implementation, it can use a simple common stub.

                This option, which gets enabled by platform HALs as

                appropriate, controls the building of the common stub."

            make -priority 315 {

                /bin/gdb_module.img : /src/stubrom/stubrom.c /lib/extras.o /lib/libtarget.a /lib/target.ld /lib/vectors.o

                @sh -c "mkdir -p src/stubrom $(dir $@)"

                $(CC) -c $(INCLUDE_PATH) -Wp,-MD,deps.tmp -I$(dir $<) $(CFLAGS) -o src/stubrom/gdb_module.o $<

                @echo $@ ": \\" > $(notdir $@).deps

                @echo $(wildcard $(PREFIX)/lib/*) " \\" >> $(notdir $@).deps

                @tail +2 deps.tmp >> $(notdir $@).deps

                @echo >> $(notdir $@).deps

                @rm deps.tmp

                $(CC) $(LDFLAGS) -L$(PREFIX)/lib -Ttarget.ld -o $@ src/stubrom/gdb_module.o

            }

        }

    }

    # Does platform need special I/O initializations?

    cdl_interface     CYGINT_HAL_PLF_IF_INIT {

        display       "Platform defined I/O channels."

        description   "

          Platforms which provide additional I/O channels can implement

          this interface, indicating that the function plf_if_init()

          needs to be called."

    }

    # Does platform provide IDE I/O macros?

    cdl_interface     CYGINT_HAL_PLF_IF_IDE {

        display       "Platform IDE I/O support."

        description   "

          Platforms which provide IDE controllers can implement

          this interface, indicating that IDE I/O macros are

          available."

    }

    cdl_option CYGPKG_HAL_GDB_FILEIO {

        display       "File I/O operations via GDB"

        default_value 0

        active_if     CYGSEM_REDBOOT_BSP_SYSCALLS

        requires      CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS

        compile       gdb-fileio.c

        description   "This option enables support for various file I/O

                       operations using the GDB remote protocol to communicate

                       with GDB. The operations are then performed on the

                       debugging host by proxy. These operations are only

                       currently available by using a system call interface

                       to RedBoot. This may change in the future."

    }

    define_proc {

        puts $::cdl_header "/***** proc output start *****/"

        puts $::cdl_header "#include "

        puts $::cdl_header "#include CYGBLD_HAL_TARGET_H"

        puts $::cdl_header "#ifdef   CYGBLD_HAL_VARIANT_H"

        puts $::cdl_header "#include CYGBLD_HAL_VARIANT_H"

        puts $::cdl_header "#endif"

        puts $::cdl_header "#include CYGBLD_HAL_PLATFORM_H"

        puts $::cdl_header "/****** proc output end ******/"

    }

    cdl_option     CYGPKG_HAL_BUILD_COMPILER_TESTS {

        display       "Build Compiler sanity checking tests"

        description   "

            Enabling this option causes compiler tests to be built."

    }

    cdl_component CYGPKG_HAL_TESTS {

        display "Common HAL tests"

        flavor  data

        no_define

        calculated {  "tests/context tests/basic"

                      . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")

                      . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")

                      . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ?   " tests/intr" : "") }

        description   "

            This option specifies the set of tests for the common HAL."

        cdl_interface CYGINT_HAL_TESTS_NO_CACHES {

            display       "Interface for cache presence"

            flavor        booldata

            description   "

                Some architectures and/or platforms do not have caches. By

                implementing this interface, these can disable the various

                cache-related tests."

        }

    }

}