Subversion Repositories openrisc

#ifndef CYGONCE_HAL_ARCH_INC

#define CYGONCE_HAL_ARCH_INC

##=============================================================================

##

##      arch.inc

##

##      i386 assembler header file

##

##=============================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

##=============================================================================

#######DESCRIPTIONBEGIN####

##

## Author(s):    nickg

## Contributors: nickg, pjo

## Date:        1999-10-15

## Purpose:     Architecture definitions.

## Description: This file contains various definitions and macros that are

##              useful for writing assembly code for the i386 CPU family.

## Usage:

##              #include 

##              ...

##

##

######DESCRIPTIONEND####

##

##=============================================================================

#include 

#include 

##-----------------------------------------------------------------------------

## CPU specific macros. These provide a common assembler interface to

## operations that may have CPU specific implementations on different

## variants of the architecture.

#ifndef CYGPKG_HAL_I386_CPU_INIT_DEFINED

        # Initialize CPU

        .macro  hal_cpu_init

        .endm

#endif /* !CYGPKG_HAL_I386_CPU_INIT_DEFINED */

##-----------------------------------------------------------------------------

#ifndef CYGPKG_HAL_I386_INTC_DEFINED

#ifndef CYGPKG_HAL_I386_INTC_INIT_DEFINED

        # initialize all interrupts to disabled

        .macro  hal_intc_init

        .endm

#endif

        .macro  hal_intc_decode vnum

        .endm

#endif

#------------------------------------------------------------------------------

# SMP support

#ifdef CYGPKG_HAL_SMP_SUPPORT

        .macro  hal_smp_init

#if defined(CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS)

        movl    $0,cyg_hal_smp_vsr_sync_flag

#endif

        .endm

        // Put CPU number in register

        .macro  hal_smp_cpu reg

        movl    cyg_hal_smp_local_apic,\reg

        movl    0x20(\reg),\reg

        shrl    $24,\reg

        .endm

#else

        .macro  hal_smp_init

        .endm

        .macro hal_smp_cpu reg

        movl    $0,\reg

        .endm

#endif

#------------------------------------------------------------------------------

# Stack switching macros

#ifndef CYG_HAL_I386_INTSTACK_MACROS_DEFINED

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK

#ifdef CYGPKG_HAL_SMP_SUPPORT

        .macro  hal_init_istack reg

        hal_smp_cpu %ebx

        movl    $__interrupt_stack_vector,%ecx

        movl    $CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE,%eax

        imull   %ebx,%eax

        addl    $__interrupt_stack_first,%eax

        movl    %eax,0(%ecx,%ebx,4)

        movl    $CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE,\reg

        addl    %eax,\reg

        .endm

        .macro  hal_load_istack reg

        hal_load_istack_base \reg

        addl    $CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE,\reg

        .endm

        .macro  hal_load_istack_base reg

        hal_smp_cpu \reg

        movl    $__interrupt_stack_vector,%eax

        movl    0(%eax,\reg,4),\reg

        .endm

#else // CYGPKG_HAL_SMP_SUPPORT

        .macro  hal_init_istack reg,tr

        movl    $__interrupt_stack,\reg         // Load interrupt stack

        .endm

        .macro  hal_load_istack reg

        movl    $__interrupt_stack,\reg         // Load interrupt stack

        .endm

        .macro  hal_load_istack_base reg

        movl    $__interrupt_stack_base,\reg    // Load interrupt stack base

        .endm

#endif // CYGPKG_HAL_SMP_SUPPORT

        .macro  hal_to_intstack

        hal_load_istack_base %ebx               // EBX = stack base

        movl    %ebx,%eax

        addl    $CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE,%eax

        cmpl    %ebx,%ebp                       # compare SP with istack base

        jb      1f                              # if sp < istack base, switch

        cmpl    %eax,%ebp                       # compare SP with istack top

        jbe     2f                              # if sp < istack top, dont switch

1:

        movl    %eax,%esp                       # move on to new stack

2:

        pushl   %ebp                            # Save old SP on new stack

        .endm

        .macro  hal_from_intstack

        popl    %esp                            # pop old SP from stack

        .endm

#define CYG_HAL_I386_INTSTACK_MACROS_DEFINED

#else // CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK

        .macro  hal_init_istack reg

        .endm

        .macro  hal_load_istack_base reg

        .endm

        .macro  hal_load_istack reg

        .endm

        .macro  hal_to_intstack

        .endm

        .macro  hal_from_intstack

        .endm

#define CYG_HAL_I386_INTSTACK_MACROS_DEFINED

#endif // CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK

#endif // CYG_HAL_I386_INTSTACK_MACROS_DEFINED

#------------------------------------------------------------------------------

# FPU macros.

#ifndef CYGPKG_HAL_I386_FPU_DEFINED

#ifdef CYGHWR_HAL_I386_FPU

#define CYGPKG_HAL_I386_FPU_DEFINED

        .macro  hal_fpu_init

        # Tell the CPU to use the math hardware.

        movl    %cr0, %eax

        orl     $0x32, %eax     # Set MP, ET, NE bits

        andl    $~0x8, %eax     # And clear TS bit

        movl    %eax, %cr0

        finit                   # and initialize...

        ## Enable floating point exceptions. Bit mask:

        ##  1 - invalid operation

        ##  2 - denormalized operand

        ##  4 - zero divide

        ##  8 - overflow

        ## 16 - underflow

        ## 32 - precision

        pushl   $0              # space for CW

        fstcw   0(%esp)         # store FPCW to stack

        movl    0(%esp),%eax    # get into EAX

        andb    $(~0x04),%al    # allow only zero divide exceptions

        movl    %eax,0(%esp)    # put back into memory

        fldcw   0(%esp)         # reload

        addl    $4,%esp         # pop value

#ifdef CYGHWR_HAL_I386_PENTIUM_SSE

        # set CR4.OSFXSR to safely use stmxcsr/ldmxcsr

        movl    %cr4, %eax

        orl     $0x200, %eax

        movl    %eax, %cr4

        ## Enable SIMD exceptions. Bit mask:

        ## 0x0080 - invalid operation

        ## 0x0100 - denormalized operand

        ## 0x0200 - zero divide

        ## 0x0400 - overflow

        ## 0x0800 - underflow

        ## 0x1000 - precision

        pushl   $0              # space for MXCSR

        stmxcsr 0(%esp)         # store MXCSR to stack

        movl    0(%esp),%eax    # get into EAX

        andw    $(~0x0200),%ax  # allow only zero divide exceptions

        movl    %eax,0(%esp)    # put back into memory

        ldmxcsr 0(%esp)         # reload

        addl    $4,%esp         # pop value

#endif

#ifdef CYGHWR_HAL_I386_FPU_SWITCH_LAZY

        # Tell the CPU to generate an FPU unavailable exception

        # when the FPU is first used.

        movl    %cr0, %eax

        orl     $0x8, %eax

        movl    %eax, %cr0

        # Plant a pointer to the FPU switch VSR into slot 7

        # of the VSR table.

        movl    $__fpu_switch_vsr,%eax

        movl    %eax,(hal_vsr_table+7*4)

        # Now create an FPU context on the stack so that we can take

        # FPU-using interrupts and exceptions before the machine starts

        # up.

        subl    $i386reg_fpucontext_size,%esp

        movl    $0,i386reg_fpucontext_valid(%esp)

        hal_smp_cpu %ebx                        # get CPU id

        movl    $cyg_hal_fpustate_current,%ecx  # current state table

        movl    %esp,0(%ecx,%ebx,4)             # save in table[cpu] entry

#endif

        .endm

        .macro  hal_fpu_cpu_init

        # Tell the CPU to use the math hardware.

        movl    %cr0, %eax

        orl     $0x32, %eax     # Set MP, ET, NE bits

        andl    $~0x8, %eax     # And clear TS bit

        movl    %eax, %cr0

        finit                   # and initialize...

        ## Enable floating point exceptions. Bit mask:

        ##  1 - invalid operation

        ##  2 - denormalized operand

        ##  4 - zero divide

        ##  8 - overflow

        ## 16 - underflow

        ## 32 - precision

        pushl   $0              # space for CW

        fstcw   0(%esp)         # store FPCW to stack

        movl    0(%esp),%eax    # get into EAX

        andb    $(~0x04),%al    # allow only zero divide exceptions

        movl    %eax,0(%esp)    # put back into memory

        fldcw   0(%esp)         # reload

        addl    $4,%esp         # pop value

#ifdef CYGHWR_HAL_I386_PENTIUM_SSE

        # set CR4.OSFXSR to safely use stmxcsr/ldmxcsr

        movl    %cr4, %eax

        orl     $0x200, %eax

        movl    %eax, %cr4

        ## Enable SIMD exceptions. Bit mask:

        ## 0x0080 - invalid operation

        ## 0x0100 - denormalized operand

        ## 0x0200 - zero divide

        ## 0x0400 - overflow

        ## 0x0800 - underflow

        ## 0x1000 - precision

        pushl   $0              # space for MXCSR

        stmxcsr 0(%esp)         # store MXCSR to stack

        movl    0(%esp),%eax    # get into EAX

        andw    $(~0x0200),%ax  # allow only zero divide exceptions

        movl    %eax,0(%esp)    # put back into memory

        ldmxcsr 0(%esp)         # reload

        addl    $4,%esp         # pop value

#endif

#ifdef CYGHWR_HAL_I386_FPU_SWITCH_LAZY

        # Tell the CPU to generate an FPU unavailable exception

        # when the FPU is first used.

        movl    %cr0, %eax

        orl     $0x8, %eax

        movl    %eax, %cr0

        # Now create an FPU context on the stack so that we can take

        # FPU-using interrupts and exceptions before the kernel starts

        # up.

        subl    $i386reg_fpucontext_size,%esp

        movl    $0,i386reg_fpucontext_valid(%esp)

        hal_smp_cpu %ebx                        # get CPU id

        movl    $cyg_hal_fpustate_current,%ecx  # current state table

        movl    %esp,0(%ecx,%ebx,4)             # save in table[cpu] entry

#endif

        .endm

#ifndef CYGHWR_HAL_I386_FPU_SWITCH_LAZY

        # Non-lazy CPU state switching. We simply switch the entire

        # FPU state on every context switch, interrupt or exception.

        # ------------------------------------------------------------

        # Context switch handling

        .macro  hal_fpu_push_ctx

        subl    $i386reg_fpstate_size,%esp      # make space

        fnsave  i386reg_fpstate(%esp)           # save FPU state

#ifdef CYGHWR_HAL_I386_PENTIUM_SSE

        # Save SIMD state.

        # FIXME. This is awfully inefficient. Need to use FXSAVE to

        # save FPU and SIMD at same time. FXSAVE requires a 16 byte

        # alignment and does not have an implicit finit as does FSAVE.

        stmxcsr i386reg_simd_mxcsr(%esp)

        movups  %xmm0,i386reg_simd_xmm0(%esp)

        movups  %xmm1,i386reg_simd_xmm1(%esp)

        movups  %xmm2,i386reg_simd_xmm2(%esp)

        movups  %xmm3,i386reg_simd_xmm3(%esp)

        movups  %xmm4,i386reg_simd_xmm4(%esp)

        movups  %xmm5,i386reg_simd_xmm5(%esp)

        movups  %xmm6,i386reg_simd_xmm6(%esp)

        movups  %xmm7,i386reg_simd_xmm7(%esp)

#endif

        movl    $1,i386reg_fpstate_valid(%esp)  # indicate it is valid

        .endm

        .macro  hal_fpu_pop_ctx

        btl     $0,i386reg_fpstate_valid(%esp)  # check ls bit of valid flag

        jc      1f                              # if set, restore state

        finit                                   # otherwise init FPU

#ifdef CYGHWR_HAL_I386_PENTIUM_SSE

        # FIXME. Anything needed here?

#endif

        jmp     2f                              # and skip restore

1:

        frstor  i386reg_fpstate(%esp)           # restore FPU state

#ifdef CYGHWR_HAL_I386_PENTIUM_SSE

        # Restore SIMD state.

        # FIXME. This is awfully inefficient. Need to use FXRSTOR to

        # restore FPU and SIMD at same time. FXRSTOR requires a 16 byte

        # alignment.

        movups  i386reg_simd_xmm0(%esp),%xmm0

        movups  i386reg_simd_xmm1(%esp),%xmm1

        movups  i386reg_simd_xmm2(%esp),%xmm2

        movups  i386reg_simd_xmm3(%esp),%xmm3

        movups  i386reg_simd_xmm4(%esp),%xmm4

        movups  i386reg_simd_xmm5(%esp),%xmm5

        movups  i386reg_simd_xmm6(%esp),%xmm6

        movups  i386reg_simd_xmm7(%esp),%xmm7

        ldmxcsr i386reg_simd_mxcsr(%esp)

#endif

2:

        addl    $i386reg_fpstate_size,%esp      # pop space used

        .endm

        # ------------------------------------------------------------

        # Interrupt and exception handling

        # In this configuration, the interrupt and exception code behaves in

        # exactly the same way as the context switch code.

        .macro  hal_fpu_push_int

        hal_fpu_push_ctx

        .endm

        .macro  hal_fpu_push_int_annex

        .endm

        .macro  hal_fpu_pop_int_annex

        .endm

        .macro  hal_fpu_pop_int

        hal_fpu_pop_ctx

        .endm

        .macro  hal_fpu_push_exc

        hal_fpu_push_ctx

        .endm

        .macro  hal_fpu_push_exc_annex

        .endm

        .macro  hal_fpu_pop_exc_annex

        .endm

        .macro  hal_fpu_pop_exc

        hal_fpu_pop_ctx

        .endm

#else // CYGHWR_HAL_I386_FPU_SWITCH_LAZY

        # Lazy CPU state switching. We defer CPU state switching until the new

        # thread actually uses the FPU. This state switch is handled by

        # __fpu_switch_vsr in vectors.S.

        .extern cyg_hal_fpustate_owner

        .extern cyg_hal_fpustate_current

        # ------------------------------------------------------------

        # Context switch handling

        # On context switch we simply stack a pointer to this

        # threads FPU context save area.

        .macro  hal_fpu_push_ctx

        hal_smp_cpu %ebx                        # Get CPU id

        movl    $cyg_hal_fpustate_current,%ecx  # current state table

        pushl   0(%ecx,%ebx,4)                  # push table[cpu] entry

        .endm

        # We do nothing here but set the CR0:TS bit to force

        # an exception when the FPU is next used and pop the

        # FPU save area pointer into the static variable.

        .macro  hal_fpu_pop_ctx

        movl    %cr0, %ecx                      # get CR0

        orl     $0x8, %ecx                      # set TS bit

        movl    %ecx, %cr0                      # restore CR0

        hal_smp_cpu %ebx                        # get CPU id

        movl    $cyg_hal_fpustate_current,%ecx  # current state table

        popl    0(%ecx,%ebx,4)                  # pop table[cpu] entry

        .endm

        # ------------------------------------------------------------

        # Interrupt handling

        # On entry to an interrupt we save the current threads FPU context

        # pointer and set the CR0:TS bit to trap any FP operations in the

        # interrupt.

        .macro  hal_fpu_push_int

        hal_smp_cpu %ebx                        # get CPU id

        movl    $cyg_hal_fpustate_current,%ecx  # current state table

        pushl   0(%ecx,%ebx,4)                  # push table[cpu] entry

        # ensure that CR0:TS bit is set

        movl    %cr0, %ecx                      # get CR0

        orl     $0x8, %ecx                      # set TS bit

        movl    %ecx, %cr0                      # restore CR0

        .endm

        # The following is called after we transfer to the interrupt

        # stack. We make space here for the FPU state of the interrupt

        # handler to be saved in case we get nested interrupts that use FP.

        .macro  hal_fpu_push_int_annex

        subl    $i386reg_fpucontext_size,%esp

        movl    $0,i386reg_fpucontext_valid(%esp)

        hal_smp_cpu %ebx                        # get CPU id

        movl    $cyg_hal_fpustate_current,%ecx  # current state table

        movl    %esp,0(%ecx,%ebx,4)             # save in table[cpu] entry

        .endm

        # This is invoked just before any transfer back to the thread stack.

        # We check whether we are the FPU state owner, and if so, abdicate.

        # There is no need to save the state, the next thread will load its

        # own state over the top of it.

        .macro  hal_fpu_pop_int_annex

        hal_smp_cpu %ebx                        # get CPU id

        movl    $cyg_hal_fpustate_owner,%ecx    # current state table

        cmpl    0(%ecx,%ebx,4),%esp             # are we FPU owner?

        jne     1f                              # if not, then just continue

        movl    $0,0(%ecx,%ebx,4)               # no one owns FPU now

        # ensure that CR0:TS bit is set to force a reload of

        # the previous FPU state

        movl    %cr0, %ecx                      # get CR0

        orl     $0x8, %ecx                      # set TS bit

        movl    %ecx, %cr0                      # restore CR0

1:

        addl    $i386reg_fpucontext_size,%esp   # pop FPU save area

        .endm

        # Final return from interrupt handling. Just pull the current

        # FPU context off the stack.

        .macro  hal_fpu_pop_int

        hal_smp_cpu %ebx                        # get CPU id

        movl    $cyg_hal_fpustate_current,%ecx  # current state table

        popl    0(%ecx,%ebx,4)                  # pop table[cpu] entry

        .endm

        # ------------------------------------------------------------

        # Exception handling

        # Whenever we take an exception, we save the current FPU state away

        # into its save area. This way, if we are going to end up in GDB, the

        # whole machine state is saved in memory.

        .macro  hal_fpu_push_exc

        hal_smp_cpu %ebx                        # get CPU id

        movl    $cyg_hal_fpustate_current,%ecx  # current state table

        pushl   0(%ecx,%ebx,4)                  # push table[cpu] entry

        movl    $cyg_hal_fpustate_owner,%ecx    # current owner table

        movl    0(%ecx,%ebx,4),%eax             # EAX = FPU state owner

        cmpl    $0,%eax                         # test it

        je      1f                              # skip if zero

        fnsave  i386reg_fpucontext_state(%eax)  # save state

#ifdef CYGHWR_HAL_I386_PENTIUM_SSE

        # Save SIMD state.

        # FIXME. This is awfully inefficient. Need to use FXSAVE to

        # save FPU and SIMD at same time. FXSAVE requires a 16 byte

        # alignment and does not have an implicit finit as does FSAVE.

        stmxcsr i386reg_simd_mxcsr(%eax)

        movups  %xmm0,i386reg_simd_xmm0(%eax)

        movups  %xmm1,i386reg_simd_xmm1(%eax)

        movups  %xmm2,i386reg_simd_xmm2(%eax)

        movups  %xmm3,i386reg_simd_xmm3(%eax)

        movups  %xmm4,i386reg_simd_xmm4(%eax)

        movups  %xmm5,i386reg_simd_xmm5(%eax)

        movups  %xmm6,i386reg_simd_xmm6(%eax)

        movups  %xmm7,i386reg_simd_xmm7(%eax)

#endif

        movl    $1,i386reg_fpucontext_valid(%eax) # set valid

        movl    $0,0(%ecx,%ebx,4)               # zero owner pointer

1:

        .endm

        # The rest of the exception macros behave exactly like the

        # interrupt ones.

        .macro  hal_fpu_push_exc_annex

        hal_fpu_push_int_annex

        .endm

        .macro  hal_fpu_pop_exc_annex

        hal_fpu_pop_int_annex

        .endm

        .macro  hal_fpu_pop_exc

        hal_fpu_pop_int

        .endm

#endif // CYGHWR_HAL_I386_FPU_SWITCH_LAZY

#else /* !CYGHWR_HAL_I386_FPU */

        # Non-FP macros.

        .macro  hal_fpu_init

        .endm

        .macro  hal_fpu_cpu_init

        .endm

        .macro  hal_fpu_push_ctx

        .endm

        .macro  hal_fpu_pop_ctx

        .endm

        .macro  hal_fpu_push_int

        .endm

        .macro  hal_fpu_push_int_annex

        .endm

        .macro  hal_fpu_pop_int_annex

        .endm

        .macro  hal_fpu_pop_int

        .endm

        .macro  hal_fpu_push_exc

        .endm

        .macro  hal_fpu_push_exc_annex

        .endm

        .macro  hal_fpu_pop_exc_annex

        .endm

        .macro  hal_fpu_pop_exc

        .endm

#endif

#endif

#------------------------------------------------------------------------------

# MMU macros.

#ifndef CYGPKG_HAL_I386_MMU_DEFINED

#define CYGPKG_HAL_I386_MMU_DEFINED

        .macro  hal_mmu_init

        .endm

#endif

#------------------------------------------------------------------------------

# A20 gate enable

#define K_RDWR                  0x60

#define K_STATUS                0x64

#define K_CMD                   0x64

#define K_OBUF_FUL              0x01

#define K_IBUF_FUL              0x02

#define KC_CMD_WIN              0xD0

#define KC_CMD_WOUT             0xD1

#define KB_A20                  0xDF

        .macro  hal_a20_enable

        // Enable A20 so that addresses at 1MB don't wrap around back to 0.

1:      inb     $K_STATUS, %al

        testb   $K_IBUF_FUL, %al

        jnz     1b

2:      inb     $K_STATUS, %al

        testb   $K_OBUF_FUL, %al

        jz      3f

        inb     $K_RDWR, %al

        jmp     2b

3:      movb    $KC_CMD_WOUT, %al

        outb    %al, $K_CMD

1:      inb     $K_STATUS, %al

        testb   $K_IBUF_FUL, %al

        jnz     1b

        movb    $KB_A20, %al

        outb    %al, $K_RDWR

1:      inb     $K_STATUS, %al

        testb   $K_IBUF_FUL, %al

        jnz     1b

        .endm

#------------------------------------------------------------------------------

# MEMC macros.

# This version simply enables the A20 gate.

#ifndef CYGPKG_HAL_I386_MEMC_DEFINED

        .macro  hal_memc_init

        hal_a20_enable

        .endm

#endif

#------------------------------------------------------------------------------

# Cache macros.

#ifndef CYGPKG_HAL_I386_CACHE_DEFINED

        .macro  hal_cache_init

        .endm

#endif

#------------------------------------------------------------------------------

# Diagnostics macros.

#ifndef CYGPKG_HAL_I386_DIAG_DEFINED

        .macro  hal_diag_init

        .endm

        .macro  hal_diag_excpt_start

        .endm

        .macro  hal_diag_intr_start

        .endm

        .macro  hal_diag_restore

        .endm

#endif

#------------------------------------------------------------------------------

# Timer initialization.

#ifndef CYGPKG_HAL_I386_TIMER_DEFINED

        .macro  hal_timer_init

        .endm

#endif

#------------------------------------------------------------------------------

# Monitor initialization.

#ifndef CYGPKG_HAL_I386_MON_DEFINED

        .macro  hal_mon_init

        .endm

#endif

#------------------------------------------------------------------------------

#endif // ifndef CYGONCE_HAL_ARCH_INC

# end of arch.inc