Subversion Repositories openrisc_me

#ifndef CYGONCE_HAL_VARIANT_INC

#define CYGONCE_HAL_VARIANT_INC

##=============================================================================

##

##      variant.inc

##

##      TX39 family assembler header file

##

##=============================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

##=============================================================================

#######DESCRIPTIONBEGIN####

##

## Author(s):   nickg

## Contributors:        nickg

## Date:        1999-04-06

## Purpose:     TX39 family definitions.

## Description: This file contains various definitions and macros that are

##              useful for writing assembly code for the TX39 CPU family.

## Usage:

##              #include 

##              ...

##

##

######DESCRIPTIONEND####

##

##=============================================================================

#include 

#include 

#include 

##-----------------------------------------------------------------------------

## Define CPU variant for architecture HAL.

#define CYG_HAL_MIPS_R3000A

#define CYG_HAL_MIPS_R3900

##-----------------------------------------------------------------------------

## Indicate that the ISR tables are defined in variant.S

#define CYG_HAL_MIPS_ISR_TABLES_DEFINED

##-----------------------------------------------------------------------------

## TX39 Memory controller.

#ifndef CYGPKG_HAL_MIPS_MEMC_DEFINED

## ROM timing characteristics are dependent on the clock speed.

#if (CYGHWR_HAL_MIPS_CPU_FREQ == 50)

#define ROM_CCR0_INIT   0x00000420

#define DRAM_DREFC_INIT 0x00000180

#define DRAM_DWR0_INIT  0x00111111

#elif (CYGHWR_HAL_MIPS_CPU_FREQ == 66)

#define ROM_CCR0_INIT   0x00000520

#define DRAM_DREFC_INIT 0x00000200

#define DRAM_DWR0_INIT  0x00332222

#else

#error Unsupported clock frequency

#endif

## DRAM configuration is dependent on the DRAM device used.

## for 16MByte (4MBit (x4bit) x 8)           0x08024030

## for 4MByte (1MBit (x4bit) x 8)            0x08013020

## for 8MByte (1MBit (x4bit) x 8 x 2 banks)  0x08013020

#if defined CYGHWR_HAL_TX39_JMR3904_DRAM_CONFIG_INIT

#define DRAM_CONFIG_INIT CYGHWR_HAL_TX39_JMR3904_DRAM_CONFIG_INIT

#else

#define DRAM_CONFIG_INIT 0x08024030

#endif

## Enabling timeout exceptions can result in bogus exceptions under the

## following conditions:

##    o half speed bus mode (JMR board uses this mode)

##    o code resides on 0 wait SRAM

##    o I- and D- caches are enabled

##    o a very narrow timing condition of cache refill cycle (not

##      descibed here)

## The simple solution is to configure 1 cycle wait state SRAM rather

## than zero.

#ifdef CYGHWR_HAL_MIPS_TX39_JMR3904_ENABLE_TOE

#define SRAM_WAIT_INIT 0x00000100

#else

#define SRAM_WAIT_INIT 0x00000000

#endif

        .macro  hal_memc_init

        # These mappings need to be set up before we

        # can use the stack and make calls to other

        # functions

        # If we have been started from Cygmon, it should have

        # already done a lot of this, but it should do no harm

        # to reinitialize the following registers.

        # SCS0,1 base addr of ISA & PCI

        la      v0,0xffffe010

        la      v1,0x20201410

        sw      v1,0(v0)

        la      v0,0xffffe014

        la      v1,0xfffffcfc

        sw      v1,0(v0)

        # ROM configuration

        .set    at

        la      v0,0xffff9000

        lw      v1,0(v0)

        and     v1,v1,0xffff0004        # keep hardware defaults

        or      v1,ROM_CCR0_INIT        # install our values

        sw      v1,0(v0)

        .set    noat

        # SRAM config

        la      v0,0xffff9100

        la      v1,SRAM_WAIT_INIT

        sw      v1,0(v0)

        # ISA bus setup

        la      v0,0xb2100000

        la      v1,4

        sb      v1,0(v0)

        # Clear IMR (to cope with JMON)

        la      v0,0xffffc004

        la      v1,0x00000000

        sw      v1,0(v0)

        hal_memc_init_dram

        .endm

        .macro hal_memc_init_dram

        # DRAM Configuration

        la      v0, 0xffff8000

        la      v1, DRAM_CONFIG_INIT

        sw      v1, 0(v0)

        # DBMR0

        la      v0, 0xffff8004

        la      v1, 0x00000000

        sw      v1, 0(v0)

        # DWR0

        la      v0, 0xffff8008

        la      v1, DRAM_DWR0_INIT

        sw      v1, 0(v0)

        # DREFC - Depends on clock requency

        la      v0, 0xffff8800

        la      v1, DRAM_DREFC_INIT

        sw      v1, 0(v0)

        .endm

#define CYGPKG_HAL_MIPS_MEMC_DEFINED

#endif

##-----------------------------------------------------------------------------

## TX39 interrupt handling.

#ifndef CYGPKG_HAL_MIPS_INTC_DEFINED

#ifdef CYGPKG_HAL_MIPS_TX3904

        # Set all ILRX registers to 0, masking all external interrupts.

        .macro  hal_intc_init

#ifndef CYG_HAL_STARTUP_RAM

        la      v0,0xFFFFC010

        move    v1,zero

        sw      v1,0(v0)

        sw      v1,4(v0)

        sw      v1,8(v0)

        sw      v1,12(v0)

#endif

        .endm

        .macro  hal_intc_decode vnum

        mfc0    v1,cause                        # get cause register

        nop

        srl     v1,v1,10                        # shift IP bits to ls bits

        andi    v1,v1,0x7F                      # isolate IP bits

        la      v0,hal_intc_translation_table   # address of translation table

        add     v0,v0,v1                        # offset of index byte

        lb      \vnum,0(v0)                     # load it

        .endm

#ifndef CYGPKG_HAL_MIPS_INTC_TRANSLATE_DEFINED

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN

        .macro  hal_intc_translate inum,vnum

        move    \vnum,zero                      # Just vector zero is supported

        .endm

#else

        .macro  hal_intc_translate inum,vnum

        move    \vnum,\inum                     # Vector == interrupt number

        .endm

#endif

#endif

# This table translates from the 6 bit value supplied in the IP bits

# of the cause register into a 0..16 offset into the ISR tables.

        .macro  hal_intc_decode_data

hal_intc_translation_table:

        .byte   0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15

        .byte   0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15

        .byte   16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16

        .byte   16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16

        .endm

#define CYGPKG_HAL_MIPS_INTC_DEFINED

#else

#error Unknown TX39 variant

#endif

#endif

#------------------------------------------------------------------------------

# Diagnostics macros.

#if 0

#ifndef CYGPKG_HAL_MIPS_DIAG_DEFINED

        # Set up PIO0 for debugging output

        .macro  hal_diag_init

        la      v0,0xfffff500

        la      v1,0xff

        sb      v1,0(v0)

        la      v1,0

        sb      v1,4(v0)

        .endm

#define CYGPKG_HAL_MIPS_DIAG_DEFINED

#endif

#endif

#------------------------------------------------------------------------------

#endif // ifndef CYGONCE_HAL_VARIANT_INC

# end of variant.inc