Subversion Repositories openrisc

2003-04-10  Nick Garnett  

        * src/hal_mips_upd985xx.ld:

        Added libsupc++.a to GROUP() directive for GCC versions later than

        3.0.

2002-04-02  Hugo Tyson  

2002-04-02  Anssi Pulkkinen 

        * src/var_misc.c (cyg_hal_interrupt_acknowledge): Remove the read

        of the read-clear ISR register - it loses other pending interrupt

        sources.  Thanks to ASCOM for spotting this.  It should have been

        removed when the soft-copy and arbitration ISR were added, because

        those changes mean the hardware register would already be cleared

        down.

2002-01-22  Hugo Tyson  

        * cdl/hal_mips_upd985xx.cdl: CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN

        must not be enabled because the way the arbitration ISR is

        attached does not work with chained interrupts.

2001-10-30  Jonathan Larmour  

        * cdl/hal_mips_upd985xx.cdl (CYGHWR_HAL_MIPS_UPD985XX_DIAG_BAUD):

        This is the same as CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD

        which RedBoot uses, so define it.

        And also reimplement CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT

        as this is what makes it work.

2001-10-30  Hugo Tyson  

        * cdl/hal_mips_upd985xx.cdl: Platform does *not* implement VV baud

        operations, in fact the implements

        CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT prevents it building.

2001-10-09  Hugo Tyson  

        * cdl/hal_mips_upd985xx.cdl (..._MIPS_UPD985XX_HARDWARE_BUGS...):

        New CDL options to control workarounds for System Controller bugs

        S1 and S2.  Shorthand for S1 requires the fixes elsewhere.  That

        for S2 selects alternate versions of the interrupt code.

        * include/var_intr.h (HAL_INTERRUPT_ACKNOWLEDGE,...): Alternative

        versions which call the new routines in src/var_misc.c to deal

        with System Controller interrupts.

        * src/var_misc.c (cyg_hal_interrupt_unmask,...): New routines to

        manage the System Controller interrupts by software rather than

        S_ISR/S_IMR.  We never mask an interrupt once unmasked, but let

        the interrupt happen, fielding it silently.  When/if it becomes

        unmasked, then we call the ISR &c.

2001-08-17  Jonathan Larmour  

        * cdl/hal_mips_upd985xx.cdl: Platform implements VV baud operations.

2001-08-08  Hugo Tyson  

        * include/variant.inc (hal_intc_decode): Do not decode the S_ISR

        interrupts after all - they must be handled by arbitration.  So

        any S_ISR interrupt is reported as CYGNUM_HAL_INTERRUPT_SYSCTL -

        Who are they?  They are *all* number 6.

        * src/var_misc.c (_arbitration_isr): New routine to arbitrate

        between - and call all of - the interrupt sources that hang off

        the system controller S_ISR register, because the S_ISR register

        is read-clear, and the interrupt sources are edge-triggered so

        they do not re-assert themselves - so we must address multiple

        sources per actual interrupt.

        (hal_variant_init): Install _arbitration_isr() on the SYSCTL

        interrupt at startup.

        * include/var_intr.h: Commented the change in interrupt usage -

        the SYSCTL is occupied from time zero.

2001-08-01  Hugo Tyson  

        * src/hal_mips_upd985xx.ld (hal_interrupt_sr_mask_shadow_base):

        This must be placed statically so it is shared with RedBoot.  And

        it must be an array so that we can address it from afar.

        * include/var_intr.h (HAL_DISABLE_INTERRUPTS): Implement this

        macro and its fellows as well as the individual MASK/UNMASK

        routines; these work together to keep the SR IM bits "true" to

        what is intended by means of a shadow variable.  Otherwise a race

        condition in the vanilla HAL_DISABLE_INTERRUPTS() can discard an

        interrupt mask change made by an ISR.

        (hal_interrupt_sr_mask_shadow): declare this and define it to

        entry zero of hal_interrupt_sr_mask_shadow_base[].

        * src/var_misc.c (hal_interrupt_sr_mask_shadow): initialize this

        new variable.

        * cdl/hal_mips_upd985xx.cdl (CYGPKG_HAL_MIPS_UPD985XX): set

        CYGINT_HAL_MIPS_INTERRUPT_RETURN_KEEP_SR_IM because we use bits

        within the SR for interrupt control.

2001-07-25  Hugo Tyson  

        * include/var_intr.h (CYGNUM_HAL_INTERRUPT_SOFT_ZERO)

        (CYGNUM_HAL_INTERRUPT_SOFT_ONE): New interrupt numbers for

        software interrupts 0 and 1.  Also mask, unmask, and ack them

        correctly; ack clears the R/W bit in the cause regsiter.

        * include/variant.inc (hal_intc_decode) : Decode Software

        interrupts into numbers 0 and 1 - all else are moved up a bit.

2001-07-20  Hugo Tyson  

        * cdl/hal_mips_upd985xx.cdl: Demand that CYGPKG_LIBM includes

        -fno-strict-aliasing in its CFLAGS_ADD to workaround a tools issue

        with access to double via pointer-to-union casts.

2001-07-18  Hugo Tyson  

        * include/var_arch.h (UARTLCR_8N1): Add more divers definitions of

        UART control bits for implementing all the controls in the serial

        device that nobody ever uses.

2001-07-17  Hugo Tyson  

        * include/variant.inc: If RAM startup, don't blow away the

        contents of cache - it might contain things that matter such as

        debug connection state.

2001-07-09  Hugo Tyson  

        * include/var_arch.h (SDMDR_INIT): Change one of the numbers to

        match what's in the hardware when set up by customer code.

        * include/variant.inc: Remove dependency on temporary development

        config point CYGBLD_HAL_STARTUP_ROM_POST_OMIT_INITIALIZATION - the

        initialization now works OK.  So hal_memc_setup_table gets called.

        * src/variant.S (hal_memc_setup_table): ROM startup now works, so

        this code now gets called.

2001-07-06  Hugo Tyson  

        * src/hal_diag.c (hal_uart_init): Ensure that we use the internal

        baud clock because there is no external one.

        * include/var_arch.h (UARTCLOCK): Clock is now 50MHz for "new"

        boards, not 18.xMHz any more.

2001-07-03  Hugo Tyson  

        * include/var_intr.h (HAL_INTERRUPT_[UN]MASK): Better manipulate

        these with interrupts disabled for atomicity.

2001-07-02  Bart Veer  

        * src/var_misc.c (hal_variant_init):

        Move the GPIO0 manipulating (flash programming voltagE)

        to the platform-init.

2001-06-27  Hugo Tyson  

        This all fixes the serial interrupt problem of 2001-06-26.

        * src/var_misc.c (hal_variant_init): Initialize the system

        controller's ISR/IMR registers to mask and ack all external

        interrupts and then enable the underlying interrupt source that

        controls them all.

        Also provide hal_interrupt_handlers[CYGNUM_HAL_ISR_COUNT]; &c for

        use by system in vectors.S, and initialize them.

        * src/hal_diag.c (cyg_hal_plf_serial_isr): Do not paranoically

        acknowledge spurious interrupts.  No need.

        * include/variant.inc: Add complete redefinitions of interrupt

        decoding to handle extended interrupt sources from the system

        controller's ISR/IMR registers.

        * include/var_intr.h: Add complete redefinitions of interrupt

        management to handle extended interrupt sources from the system

        controller's ISR/IMR registers.

        * include/var_arch.h (S_ISR_ADR): Add ISR and IMR register

        addresses for use by assembly files.

        * include/plf_stub.h: Provide proto for cyg_hal_plf_comms_init()

        to reduce warning.

2001-06-26  Hugo Tyson  

        * cdl/hal_mips_upd985xx.cdl: Remove src/var_stub.c - functionality

        is duplicated in the common HAL.

        * include/plf_stub.h: Remove a load of unneccessary cruft which is

        duplicated in the common HAL.

        * src/var_stub.c: Removed.

2001-06-26  Hugo Tyson  

        * src/var_misc.c (hal_variant_init): Unmask the UART interrupt in

        the system controller - this is before the interrupt system in the

        MIPS core which is used for dynamic control.

        Also removed a load of duplicate hal_ctrlc_isr/HAL_CTRLC_ISR stuff

        that fought with the common HAL,

        Asynchronous CTRL-C still does not work.  The interrupt asserts

        forever.  This is similar to System Controller known bug S2

        "Interrupt Mask Restriction" from the NEC docs.  Hence this code

        in this file:

        // *******************FIXME

        // This causes an interrupt loop from the UART as soon as you do IO.

        //    *S_IMR |= S_ISR_UARTIS; // unmask UART

        // *******************NB we mask it here so that the status is in control

        // *******************   of the application code whatever RedBoot does.

            *S_IMR &=~S_ISR_UARTIS;

        // *******************FIXME

        * src/hal_diag.c (cyg_hal_plf_serial_isr): This now contains all

        it should need to.

        (cyg_hal_plf_serial_control): Ditto, all cases now supported.

        CYGHWR_HAL_GDB_PORT_VECTOR use now unconditional, other tidyups.

        Bugfix to interrupt ack in nonblocking read, it was after the

        return.

        * cdl/hal_mips_upd985xx.cdl: We want to support ^Cm, so do not

        implement CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED.

        * include/var_intr.h (HAL_READ_INTR_REGS): New macro, handy for

        debugging MIPS.  Also remove duplicate hal_ctrlc_isr/HAL_CTRLC_ISR

        stuff that fought with the common HAL, just leaving

        CYGHWR_HAL_GDB_PORT_VECTOR defined.

        * src/var_stub.c (hal_var_stub_init): Use symbols for entries in

        vector tables and the like.

2001-06-22  Hugo Tyson  

        * include/variant.inc: Use the proper target-agnostic config

        include CYGBLD_HAL_PLATFORM_H, and do not initialize the memory

        controller if you're told not to by the platform configuration

        CYGBLD_HAL_STARTUP_ROM_POST_OMIT_INITIALIZATION.

2001-06-22  Hugo Tyson  

        * src/var_misc.c (hal_variant_init): Enable write-access to the

        flash area, and power-up the programming voltage via GPIO0, so

        that flash drivers can work.  Also enable the IBUS Arbiter so that

        internal peripherals can work.

        * src/variant.S (hal_memc_setup): Remove hal_memc_setup for RAM

        start; the work is done elsewhere.

        * include/variant.inc (hal_memc_init): Don't call hal_memc_setup

        for RAM start.

2001-06-07  Hugo Tyson  

        * include/variant.inc (hal_memc_init): Always do the memc call

        even in RAM start, to enable...

        * src/variant.S (hal_memc_setup): Enable write-access to the flash

        area so that flash drivers can work.

2001-06-06  Hugo Tyson  

        * include/var_cache.h (HAL_DCACHE_ENABLE_DEFINED): Add enough NOPs

        after diddling the cache-enability that it works.  Also give

        correct (apparantly!) figures for cache size despite the

        documentation arguing with itself.

        * src/var_misc.c (hal_variant_init): Enable the caches during

        startup.

        * include/var_arch.h: Add a very few definitions for use by

        assembler code here, and tidy up a little so that it can be used

        from .S files.  Specifically this is to let us init the RAM and

        ROM access controllers from assembly.

        * src/variant.S:

        * include/variant.inc: Cut out some stuff we don't need that I had

        blindly copied from another platform.  Specifically we don't need

        to set up the TLB *at all* because all its space are belong, um,

        all memory, IO and devices are accessible through kseg1 and kseg0.

        Added initial (untested) cut at setup of RAM/ROM controllers.

2001-06-06  Hugo Tyson  

        * cdl/hal_mips_upd985xx.cdl: Add implements statement for

        CYGINT_HAL_DEBUG_GDB_STUBS_BREAK, moved from the platform HAL.

2001-06-05  Hugo Tyson  

        * include/variant.inc: It all works rather better now...  fiddling

        with vector setup and cache initialization.

2001-06-05  Hugo Tyson  

        * cdl/hal_mips_upd985xx.cdl: to make GDB stubs work, implements

        CYGINT_HAL_MIPS_STUB_REPRESENT_32BIT_AS_64BIT.  Commented out

        implements CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT_NOT_GUARANTEED.

        * include/hal_diag.h: Now it works, properly be dependent on

        CYGSEM_HAL_VIRTUAL_VECTOR_DIAG.

        * include/plf_stub.h: Choose the right init routine dependent on

        CYGSEM_HAL_VIRTUAL_VECTOR_DIAG.

        * src/hal_diag.c (hal_uart_init): Remove diagnostics and delays

        from initialization.

        * src/var_stub.c (hal_var_stub_init): Remove bogus definition of

        vsr_table and leave breakpoint VSR alone, the springboard will

        handle it AOK.

2001-06-04  Hugo Tyson  

        * cdl/hal_mips_upd985xx.cdl

        * include/hal_diag.h

        * include/plf_stub.h

        * include/var_arch.h

        * include/var_cache.h

        * include/var_intr.h

        * include/variant.inc

        * src/hal_diag.c

        * src/hal_mips_upd985xx.ld

        * src/var_misc.c

        * src/var_stub.c

        * src/variant.S

        New files; initial checkin.

        RAM startup works; kernel tests run, loaded via SRecords,

        including tm_basic, clockcnv, mutex3 and the exception tests.

        Virtual vector calling works, but all apps do not work with a ROM

        monitor, so they are all standalone.  Diag printf et all all work.

        Floating point emulation works.

//===========================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//===========================================================================