Subversion Repositories openrisc

//=============================================================================

//

//      plf_stub.c

//

//      Platform specific code for GDB stub support.

//

//=============================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//=============================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):   dmoseley (based on the old mn10300 hal_stub.c)

// Contributors:dmoseley

// Date:        2000-08-11

// Purpose:     Platform specific code for GDB stub support.

//              

//####DESCRIPTIONEND####

//

//=============================================================================

#include <pkgconf/hal.h>

#include <cyg/hal/hal_io.h>             // HAL IO macros

#ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS

#include <cyg/hal/hal_stub.h>

#include <cyg/hal/hal_intr.h>           // HAL interrupt macros

//---------------------------------------------------------------------------

#ifdef CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT

#define ASB2303_SER0_BASE      0xD4002000

#define _SERIAL_RXR      0x09

#define SERIAL0_RXR      ((volatile cyg_uint8 *) (ASB2303_SER0_BASE + _SERIAL_RXR))

// This ISR is called from the interrupt handler. This should only

// happen when there is no serial driver, so the code shouldn't mess

// anything up.

int cyg_hal_gdb_isr(cyg_uint32 vector, target_register_t pc)

{

    if ( CYGNUM_HAL_INTERRUPT_SERIAL_0_RX == vector ) {

        cyg_uint8 c;

        HAL_READ_UINT8 (SERIAL0_RXR, c);

        HAL_INTERRUPT_ACKNOWLEDGE (CYGNUM_HAL_INTERRUPT_SERIAL_0_RX);

        if( 3 == c )

        {

            // Ctrl-C: set a breakpoint at PC so GDB will display the

            // correct program context when stopping rather than the

            // interrupt handler.

            cyg_hal_gdb_interrupt (pc);

            // Interrupt handled. Don't call ISR proper. At return

            // from the VSR, execution will stop at the breakpoint

            // just set.

            return 0;

        }

    }

    // Not caused by GDB. Call ISR proper.

    return 1;

}

#ifndef CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT

int hal_asb_interruptible(int state)

{

    if (state) {

        HAL_WRITE_UINT8 (SERIAL0_ICR, 0);

        HAL_INTERRUPT_ACKNOWLEDGE (CYGNUM_HAL_INTERRUPT_SERIAL_0_RX)

        HAL_INTERRUPT_UNMASK (CYGNUM_HAL_INTERRUPT_SERIAL_0_RX)

    } else {

        HAL_INTERRUPT_MASK (CYGNUM_HAL_INTERRUPT_SERIAL_0_RX)

    }

    return 0;

}

void hal_asb_init_break_irq( void )

{

    // Enable serial receive interrupts.

    HAL_WRITE_UINT8 (SERIAL0_ICR, 0);

    HAL_INTERRUPT_ACKNOWLEDGE (CYGNUM_HAL_INTERRUPT_SERIAL_0_RX)

    HAL_INTERRUPT_UNMASK (CYGNUM_HAL_INTERRUPT_SERIAL_0_RX)

    HAL_ENABLE_INTERRUPTS();

}

#endif

#endif

//-----------------------------------------------------------------------------

void hal_asb_platform_init(void)

{

    extern CYG_ADDRESS hal_virtual_vector_table[64];

    extern void init_thread_syscall( void *);

    extern void install_async_breakpoint(void *epc);

//    void (*oldvsr)(void);

    extern void _default_trap_vsr(void);

    // Ensure that the breakpoint VSR points to the default VSR. This will pass

    // it on to the stubs.

//    HAL_VSR_SET( CYGNUM_HAL_VECTOR_BREAKPOINT, _default_trap_vsr, &oldvsr );

    // Install async breakpoint handler into vector table.

    hal_virtual_vector_table[35] = (CYG_ADDRESS)install_async_breakpoint;

#if !defined(CYGPKG_KERNEL) && defined(CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT)

    // Only include this code if we do not have a kernel. Otherwise

    // the kernel supplies the functionality for the app we are linked

    // with.

    // Prepare for application installation of thread info function in

    // vector table.

    hal_virtual_vector_table[15] = 0;

    init_thread_syscall( (void *)&hal_virtual_vector_table[15] );

#endif

}

#endif // ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS

/*------------------------------------------------------------------------*/

/* Reset support                                                          */

#define RSTCTR        0xc0001004

#define CHIPRST       0x01

void hal_asb_reset(void)

{

    // Unfortunately this only resets the MN103E010

    // A full board reset is not done.  ie If the boot block select switched,

    // and a Cygmon reset called the switch change will not occur.  AFAICT

    // the only way to notice that change is to use the Reset switch on the

    // board.

    HAL_WRITE_UINT8(RSTCTR, 0x00);

    HAL_WRITE_UINT8(RSTCTR, CHIPRST);

    // Just in case.

    while (1) ;

}

//-----------------------------------------------------------------------------

// End of plf_stub.c