Subversion Repositories openrisc

##=============================================================================

##

##      adder.S

##

##      ADDER board hardware setup

##

##=============================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

## Copyright (C) 2002 Gary Thomas

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

##=============================================================================

#######DESCRIPTIONBEGIN####

##

## Author(s):   hmt

## Contributors:hmt, gthomas

## Date:        1999-06-08

## Purpose:     ADDER board hardware setup

## Description: This file contains any code needed to initialize the

##              hardware on a ADDER PPC860 board.

##

######DESCRIPTIONEND####

##

##=============================================================================

#include 

#include                /* register symbols et al */

#include                /* on-chip resource layout, special */

                                        /* registers, IMM layout...         */

#include        /* more of the same */

#------------------------------------------------------------------------------

# this is controlled with one define for tidiness:

# (and it is undefined by default)

//#define CYGPRI_RAM_START_PROGRAMS_UPMS

#if defined(CYG_HAL_STARTUP_ROM) \

 || defined(CYG_HAL_STARTUP_ROMRAM) \

 || defined(CYGPRI_RAM_START_PROGRAMS_UPMS)

# define CYGPRI_DO_PROGRAM_UPMS

#endif

/* The intention is that we only set up the UPMs in ROM start, be it actual

 * ROM application start or Stub ROMs that we built from the same sources.

 *

 * The alternative approach - in which we have reliability doubts - is to

 * program the UPMs with *old* timing data in StubROM start, then

 * *reprogram* them with *new* timing data in RAM start - and of course

 * program with *new* timing data in plain ROM application start.

 * (Re-programming from new to new timing data fails - hence the suspicion

 * of reprogramming _at_all_, hence this private configuration)

 *

 * With CYGPRI_RAM_START_PROGRAMS_UPMS left undefined, the former behaviour

 * - programming the UPMs exactly once - is obtained.  Define it to get the

 * latter, untrusted behaviour.

 */

#------------------------------------------------------------------------------

FUNC_START( hal_hardware_init )

        # Throughout this routine, r4 is the base address of the control

        # registers.  r3 and r5 are scratch in general.

        lwi     r4,CYGARC_REG_IMM_BASE  # base address of control registers

        mtspr   CYGARC_REG_IMMR,r4

#define CACHE_UNLOCKALL         0x0a00

#define CACHE_DISABLE           0x0400

#define CACHE_INVALIDATEALL     0x0c00

#define CACHE_ENABLE            0x0200

#define CACHE_ENABLEBIT         0x8000

#define CACHE_FORCEWRITETHROUGH 0x0100

#define CACHE_NOWRITETHROUGH    0x0300

#define CACHE_CLEAR_LE_SWAP     0x0700

        # DATA CACHE

        mfspr   r3,CYGARC_REG_DC_CST            /* clear error bits */

        lis     r3,CACHE_UNLOCKALL

        sync

        mtspr   CYGARC_REG_DC_CST,r3            /* unlock all lines */

        lis     r3,CACHE_INVALIDATEALL

        sync

        mtspr   CYGARC_REG_DC_CST,r3            /* invalidate all lines */

        lis     r3,CACHE_DISABLE

        sync

        mtspr   CYGARC_REG_DC_CST,r3            /* disable */

        lis     r3,CACHE_FORCEWRITETHROUGH

        sync

        mtspr   CYGARC_REG_DC_CST,r3            /* set force-writethrough mode */

        lis     r3,CACHE_CLEAR_LE_SWAP

        sync

        mtspr   CYGARC_REG_DC_CST,r3            /* clear little-endian swap mode */

        /* (dunno what this is, but it sounds like a bad thing) */

        # INSTRUCTION CACHE (no writeback modes)

        mfspr   r3,CYGARC_REG_IC_CST            /* clear error bits */

        lis     r3,CACHE_UNLOCKALL

        mtspr   CYGARC_REG_IC_CST,r3            /* unlock all lines */

        isync

        lis     r3,CACHE_INVALIDATEALL

        mtspr   CYGARC_REG_IC_CST,r3            /* invalidate all lines */

        isync

        lis     r3,CACHE_DISABLE

        mtspr   CYGARC_REG_IC_CST,r3            /* disable */

        isync

        sync

        /*

         * SIU Initialization.

         */

        lwi     r3,0x00610400

        stw     r3,SIUMCR(r4)

#ifdef CYG_HAL_STARTUP_ROMRAM

// Need to set the PC into the FLASH (ROM) before the address map changes

        lwi     r3,10f

        lwi     r5,0xFE000000

        or      r3,r3,r5

        mtctr   r3

        bctr

10:

#endif

        /*

         * Enable bus monitor. Disable Watchdog timer.

         */

        lwi     r3,0xffffff88

        stw     r3,SYPCR(r4)

        /*

         * Clear REFA & REFB. Enable but freeze timebase.

         */

        lwi     r3,0x0000            // FIXME:   should this be 0x0000 or 0x00C2

        sth     r3,TBSCR(r4)

        /*

         * Unlock some RTC registers (see section 5.11.2)

         */

        lwi     r3,0x55ccaa33

        stw     r3,RTCSCK(r4)

        stw     r3,RTCK(r4)

        stw     r3,RTSECK(r4)

        stw     r3,RTCALK(r4)

        /*

         * Clear SERC & ALR. RTC runs on freeze. Enable RTC.

         */

        li      r3,0x0000            // FIXME:   should this be 0x0000 or 0x00C3

        sth     r3,RTCSC(r4)

        /*

         * Clear periodic timer interrupt status.

         * Enable periodic timer and stop it on freeze.

         */

        li      r3,0x0001            // FIXME:   should this be 0x0001 or 0x0083

        sth     r3,PISCR(r4)

#ifdef CYGPRI_DO_PROGRAM_UPMS

        /*

         * Perform UPM programming by writing to its 64 RAM locations.

         * Note that UPM initialization must be done before the Bank Register

         * initialization. Otherwise, system may hang when writing to Bank

         * Registers in certain cases.

         */

        lis     r5,__upmtbl_start@h

        ori     r5,r5,__upmtbl_start@l

        lis     r6,__upmtbl_end@h

        ori     r6,r6,__upmtbl_end@l

        sub     r7,r6,r5      /* size of table */

        srawi   r7,r7,2       /* in words */

        li      r6,0x00000000     /* Command - OP=Write, UPMA, MAD=0 */

    1:

        lwz     r3,0(r5)      /* get data from table */

        stw     r3,MDR(r4)    /* store the data to MD register */

        stw     r6,MCR(r4)    /* issue command to MCR register */

        addi    r5,r5,4       /* next entry in the table */

        addi    r6,r6,1       /* next MAD address */

        cmpw    r6,r7         /* done yet ? */

        blt     1b

#endif // CYGPRI_DO_PROGRAM_UPMS

        /*

         * Set refresh timer prescaler to divide by 8.

         */

        li      r3,PTP_DIV32

        sth     r3,MPTPR(r4)

        /*

         * See Table 15-16 MPC860 User's Manual.

         *

// Set the value of Machine A Mode Register (MAMR) to $5E802114.

//      Field PTA (bits 0-7) = 94

//      Field PTAE (bit 8) = 1

//      Field AMA (bits 9-11) = 0

//      Field Reserved (bit 12) = 0

//      Field DSA (bits 13-14) = 0

//      Field Reserved (bit 15) = 0

//      Field G0CLA (bits 16-18) = 1

//      Field GPL_A4DIS (bit 19) = 0

//      Field RLFA (bits 20-23) = 1

//      Field WLFA (bits 24-27) = 1

//      Field TLFA (bits 28-31) = 4

         */

//

// PTA field is (System Clock in MHz * Refresh rate in us) / Prescale

// e.g.  ((14*3.6864)*62.5)/32 => 100.8 => 101

//

#if (CYGHWR_HAL_POWERPC_BOARD_SPEED == 47)

#define PLPRCR_PTX 0x00C // (47MHz/3.6864MHz)-1

#define MAMR_PTA 94

#endif

#if (CYGHWR_HAL_POWERPC_BOARD_SPEED == 51)

#define PLPRCR_PTX 0x00D // (51.6MHz/3.6864MHz)-1

#define MAMR_PTA 101

#endif

#if (CYGHWR_HAL_POWERPC_BOARD_SPEED == 55)

#define PLPRCR_PTX 0x00E // (55.3MHz/3.6864MHz)-1

#define MAMR_PTA 108

#endif

#if (CYGHWR_HAL_POWERPC_BOARD_SPEED == 59)

#define PLPRCR_PTX 0x00F // (58.9MHz/3.6864MHz)-1

#define MAMR_PTA 116

#endif

#if (CYGHWR_HAL_POWERPC_BOARD_SPEED == 63)

#define PLPRCR_PTX 0x010 // (62.7MHz/3.6864MHz)-1

#define MAMR_PTA 123

#endif

//#define MAMR_PTA (((((((PLPRCR_PTX+1)*3686400)*625)/10000000)+31)/32)&0xFF)

        lwi     r3,0x00802114|(MAMR_PTA<<24)

        stw     r3,MAMR(r4)

        stw     r3,MBMR(r4)

        /*

         * Base Register initialization.

         */

        /* BOOT ROM */

        lwi     r3,0xFE000801   # 16-bit, GPCM

        lwi     r5,0xFF800774   # 7 wait states, up to 8MB

        stw     r3,BR0(r4)

        stw     r5,OR0(r4)

        /* Misc I/O, 16 bit port */

        lwi     r3,0xFA100801

        lwi     r5,0xFFFF8730

        stw     r3,BR2(r4)

        stw     r5,OR2(r4)

        /* ONBOARD DRAM */

        lwi     r3,0x00000081   # 32-bit, UPMA

        lwi     r5,0xFF800E00

        stw     r3,BR1(r4)

        stw     r5,OR1(r4)

        /* DRAM DIMM BANK1 */

        lwi     r3,0x00000080   # 32-bit, UPMA, INVALID

        lwi     r5,0xFFFF87FC

        stw     r3,BR3(r4)

        stw     r5,OR3(r4)

#if 0

        /* NVRAM */

        lwi     r3,0xfa000401   # 8-bit, GPCM

        lwi     r5,0xffe00930

        stw     r3,BR4(r4)

        stw     r5,OR4(r4)

        /* PCI BRIDGE MEM/IO */

        lwi     r3,0x80000001   # 32-bit, GPCM

        lwi     r5,0xa0000108

        stw     r3,BR5(r4)

        stw     r5,OR5(r4)

        /* PCI BRIDGE REGISTERS */

        lwi     r3,0xfa210001   # 32-bit, GPCM

        lwi     r5,0xffff0108

        stw     r3,BR6(r4)

        stw     r5,OR6(r4)

        /* FLASH */

        lwi     r3,0xfc000001   # 32-bit, GPCM

        lwi     r5,0xff800940

        stw     r3,BR7(r4)

        stw     r5,OR7(r4)

#endif

        /*

         *  SYSTEM CLOCK CONTROL REGISTER

// Set the value of System Clock and Reset Control Register (SCCR) to $00400000.

//      Field Reserved (bit 0) = 0

//      Field COM (bits 1-2) = 0

//      Field Reserved (bits 3-5) = 0

//      Field TBS (bit 6) = 0

//      Field RTDIV (bit 7) = 0

//      Field RTSEL (bit 8) = 0

//      Field CRQEN (bit 9) = 1

//      Field PRQEN (bit 10) = 0

//      Field Reserved (bits 11-12) = 0

//      Field EBDF (bits 13-14) = 0

//      Field Reserved (bits 15-16) = 0

//      Field DFSYNC (bits 17-18) = 0

//      Field DFBRG (bits 19-20) = 0

//      Field DFNL (bits 21-23) = 0

//      Field DFNH (bits 24-26) = 0

//      Field Reserved (bits 27-31) = 0

         */

        lwi     r3,0x00400000

        stw     r3,SCCR(r4)

        /*

         *  PLL, LOW POWER, AND RESET CONTROL REGISTER

// Set the value of PLL, Low Power and Reset Control Register (PLPRCR) to $00C04000.

//      Field MF (bits 0-11) = 12

//      Field Reserved (bits 12-15) = 0

//      Field SPLSS (bit 16) = 0

//      Field TEXPS (bit 17) = 1

//      Field Reserved (bit 18) = 0

//      Field TMIST (bit 19) = 0

//      Field Reserved (bit 20) = 0

//      Field CSRC (bit 21) = 0

//      Field LPM (bits 22-23) = 0

//      Field CSR (bit 24) = 0

//      Field LOLRE (bit 25) = 0

//      Field FIOPD (bit 26) = 0

//      Field Reserved (bits 27-31) = 0

         */

        lwi     r3,0x04000|(PLPRCR_PTX<<20)

        stw     r3,PLPRCR(r4)

        lwi     r3,0x40000

        mtctr   r3

10:     nop

        bdnz    10b

        /* SDRAM Initialization Sequence, UPMA, CS1 */

        li      r3,0

        stw     r3,MAR(r4)

        lwi     r3,0x80002115;  /* run precharge from loc 21 (0x15) */

        stw     r3,MCR(r4)

        lwi     r3,0x80002830;  /* run refresh 8 times */

        stw     r3,MCR(r4)

        lwi     r3,0x88;        /* MR 88 for high range */

        stw     r3,MAR(r4)

        lwi     r3,0x80002116;  /* run MRS pattern from loc 22 (0x16) */

        stw     r3,MCR(r4)

        # mask interrupt sources in the SIU

        lis     r2,0

        lwi     r3,CYGARC_REG_IMM_SIMASK

        stw     r2,0(r3)

        # set the decrementer to maxint

        lwi     r2,0

        not     r2,r2

        mtdec   r2

        # and enable the timebase and decrementer to make sure

        li      r2,1                            # TBEnable and not TBFreeze

        lwi     r3,CYGARC_REG_IMM_TBSCR

        sth     r2,0(r3)

#ifdef CYG_HAL_STARTUP_ROM

        # move return address to where the ROM is

        mflr    r3

        lwi     r4,0x00FFFFFF        // CAUTION!! Assumes only low 16M for ROM

        and     r3,r3,r4

        oris    r3,r3,CYGMEM_REGION_rom>>16

        mtlr    r3

#endif

#ifdef CYG_HAL_STARTUP_ROMRAM

        // Copy image from ROM to RAM

        mflr    r3

        lwi     r4,0xFE000000

        lwi     r5,0x01FFFFFF   // ROM/FLASH base

        and     r3,r3,r5        // segment relative

        lwi     r6,_hal_hardware_init_done

        mtlr    r6

        sub     r6,r3,r6        // Absolute address

        add     r6,r6,r4        // FLASH address

        lwi     r7,0            // where to copy to

        lwi     r8,__ram_data_end

10:     lwz     r5,0(r6)

        stw     r5,0(r7)

        addi    r6,r6,4

        addi    r7,r7,4

        cmplw   r7,r8

        bne     10b

#endif

        blr

FUNC_END( hal_hardware_init )

#ifdef CYGPRI_DO_PROGRAM_UPMS

# -------------------------------------------------------------------------

# this table initializes the User Programmable Machine (UPM) nastiness

# in the QUICC to control DRAM timing.

__upmtbl_start:

// single read   (offset 0x00 in upm ram)

       .long   0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00

       .long   0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04

// burst read    (offset 0x08 in upm ram)

       .long   0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00

       .long   0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44

       .long   0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35

       .long   0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35

// single write  (offset 0x18 in upm ram)

       .long   0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47

       .long   0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04

// burst write   (offset 0x20 in upm ram)

       .long   0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00

       .long   0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04

       .long   0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04

       .long   0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04

// refresh       (offset 0x30 in upm ram)

       .long   0x1ff5fca4, 0xfffffc04, 0xfffffc04, 0xfffffc04

       .long   0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04

       .long   0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04

// exception     (offset 0x3C in upm ram)

       .long   0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04

__upmtbl_end:

#endif // CYGPRI_DO_PROGRAM_UPMS

#------------------------------------------------------------------------------

# end of adder.S