| 1 |
27 |
unneback |
##=============================================================================
|
| 2 |
|
|
##
|
| 3 |
|
|
## cme555.S
|
| 4 |
|
|
##
|
| 5 |
|
|
## CME555 board hardware setup
|
| 6 |
|
|
##
|
| 7 |
|
|
##=============================================================================
|
| 8 |
|
|
#####ECOSGPLCOPYRIGHTBEGIN####
|
| 9 |
|
|
## -------------------------------------------
|
| 10 |
|
|
## This file is part of eCos, the Embedded Configurable Operating System.
|
| 11 |
|
|
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
|
| 12 |
|
|
##
|
| 13 |
|
|
## eCos is free software; you can redistribute it and/or modify it under
|
| 14 |
|
|
## the terms of the GNU General Public License as published by the Free
|
| 15 |
|
|
## Software Foundation; either version 2 or (at your option) any later version.
|
| 16 |
|
|
##
|
| 17 |
|
|
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
|
| 18 |
|
|
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
| 19 |
|
|
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
| 20 |
|
|
## for more details.
|
| 21 |
|
|
##
|
| 22 |
|
|
## You should have received a copy of the GNU General Public License along
|
| 23 |
|
|
## with eCos; if not, write to the Free Software Foundation, Inc.,
|
| 24 |
|
|
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
|
| 25 |
|
|
##
|
| 26 |
|
|
## As a special exception, if other files instantiate templates or use macros
|
| 27 |
|
|
## or inline functions from this file, or you compile this file and link it
|
| 28 |
|
|
## with other works to produce a work based on this file, this file does not
|
| 29 |
|
|
## by itself cause the resulting work to be covered by the GNU General Public
|
| 30 |
|
|
## License. However the source code for this file must still be made available
|
| 31 |
|
|
## in accordance with section (3) of the GNU General Public License.
|
| 32 |
|
|
##
|
| 33 |
|
|
## This exception does not invalidate any other reasons why a work based on
|
| 34 |
|
|
## this file might be covered by the GNU General Public License.
|
| 35 |
|
|
##
|
| 36 |
|
|
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
|
| 37 |
|
|
## at http://sources.redhat.com/ecos/ecos-license/
|
| 38 |
|
|
## -------------------------------------------
|
| 39 |
|
|
#####ECOSGPLCOPYRIGHTEND####
|
| 40 |
|
|
##=============================================================================
|
| 41 |
|
|
#######DESCRIPTIONBEGIN####
|
| 42 |
|
|
##
|
| 43 |
|
|
## Author(s): Bob Koninckx
|
| 44 |
|
|
## Contributors:Bob Koninckx
|
| 45 |
|
|
## Date: 2001-12-15
|
| 46 |
|
|
## Purpose: cme555 board hardware setup
|
| 47 |
|
|
## Description: This file contains any code needed to initialize the
|
| 48 |
|
|
## hardware on a cme555 mpc555 board.
|
| 49 |
|
|
##
|
| 50 |
|
|
######DESCRIPTIONEND####
|
| 51 |
|
|
##
|
| 52 |
|
|
##=============================================================================
|
| 53 |
|
|
|
| 54 |
|
|
#include
|
| 55 |
|
|
|
| 56 |
|
|
#include
|
| 57 |
|
|
#include
|
| 58 |
|
|
|
| 59 |
|
|
#------------------------------------------------------------------------------
|
| 60 |
|
|
|
| 61 |
|
|
.globl hal_hardware_init
|
| 62 |
|
|
hal_hardware_init:
|
| 63 |
|
|
|
| 64 |
|
|
#if defined(CYGPKG_HAL_POWERPC_CME555) && defined(CYGPKG_HAL_POWERPC_MPC5xx)
|
| 65 |
|
|
lwi r3, CYGARC_REG_IMM_BASE # Base address of control registers
|
| 66 |
|
|
|
| 67 |
|
|
// Configure external interrupt pins as General purpose I/O. They do not
|
| 68 |
|
|
// have pull-up resistors on the CME555. Add to that that IRQ0 triggers
|
| 69 |
|
|
// a non-maskable reset of the board ... This one gave me nightmares ...
|
| 70 |
|
|
lwi r4, 0x00000800
|
| 71 |
|
|
stw r4, (CYGARC_REG_IMM_SIUMCR-CYGARC_REG_IMM_BASE)(r3)
|
| 72 |
|
|
lwi r4, 0xff88
|
| 73 |
|
|
stw r4, (CYGARC_REG_IMM_SYPCR-CYGARC_REG_IMM_BASE)(r3)
|
| 74 |
|
|
|
| 75 |
|
|
// Memory map
|
| 76 |
|
|
// CS0 configuration
|
| 77 |
|
|
// Base address 0x400000, no burst support, 32 bit wide data port
|
| 78 |
|
|
// Valid addresses till 0x43FFFF, no wait states
|
| 79 |
|
|
lwi r4, 0x00400003
|
| 80 |
|
|
stw r4, (CYGARC_REG_IMM_BR0-CYGARC_REG_IMM_BASE)(r3)
|
| 81 |
|
|
lwi r4, 0xfff80002
|
| 82 |
|
|
stw r4, (CYGARC_REG_IMM_OR0-CYGARC_REG_IMM_BASE)(r3)
|
| 83 |
|
|
|
| 84 |
|
|
// CS1 configuration
|
| 85 |
|
|
// Base address 0x800000, no burst support, 32 bit wide data port
|
| 86 |
|
|
// Valid adresses till 0x87FFFF, three wait states for access time 70ns
|
| 87 |
|
|
lwi r4, 0x00800003
|
| 88 |
|
|
stw r4, (CYGARC_REG_IMM_BR1-CYGARC_REG_IMM_BASE)(r3)
|
| 89 |
|
|
lwi r4, 0xfff80032
|
| 90 |
|
|
stw r4, (CYGARC_REG_IMM_OR1-CYGARC_REG_IMM_BASE)(r3)
|
| 91 |
|
|
|
| 92 |
|
|
// CS2 configuration
|
| 93 |
|
|
// Base address 0xc00000, no burst support, 32 bit wide data port
|
| 94 |
|
|
// Valid adresses till 0xc7FFFF, maximum wait states
|
| 95 |
|
|
lwi r4, 0x00c00003
|
| 96 |
|
|
stw r4, (CYGARC_REG_IMM_BR2-CYGARC_REG_IMM_BASE)(r3)
|
| 97 |
|
|
lwi r4, 0xfff800f2
|
| 98 |
|
|
stw r4, (CYGARC_REG_IMM_OR2-CYGARC_REG_IMM_BASE)(r3)
|
| 99 |
|
|
|
| 100 |
|
|
// CS3 configuration
|
| 101 |
|
|
// works for keypad/LCD
|
| 102 |
|
|
// maximum wait states
|
| 103 |
|
|
lwi r4, 0x01000403
|
| 104 |
|
|
stw r4, (CYGARC_REG_IMM_BR3-CYGARC_REG_IMM_BASE)(r3)
|
| 105 |
|
|
lwi r4, 0xfffe0ff1
|
| 106 |
|
|
stw r4, (CYGARC_REG_IMM_OR3-CYGARC_REG_IMM_BASE)(r3)
|
| 107 |
|
|
|
| 108 |
|
|
// And some other configuration registers
|
| 109 |
|
|
#if defined(CYGSEM_HAL_POWERPC_MPC5XX_IFLASH_DUAL_MAP)
|
| 110 |
|
|
lwi r4, 1
|
| 111 |
|
|
#else
|
| 112 |
|
|
lwi r4, 0
|
| 113 |
|
|
#endif
|
| 114 |
|
|
stw r4, (CYGARC_REG_IMM_DMBR-CYGARC_REG_IMM_BASE)(r3)
|
| 115 |
|
|
lwi r4, 0
|
| 116 |
|
|
stw r4, (CYGARC_REG_IMM_DMOR-CYGARC_REG_IMM_BASE)(r3)
|
| 117 |
|
|
|
| 118 |
|
|
// Limb mode enable, TMBCLK = BUS/16, RTCCLK = Crystal / 16
|
| 119 |
|
|
// generate 40 MHz bus clock
|
| 120 |
|
|
lwi r4, 0x3010000
|
| 121 |
|
|
stw r4, (CYGARC_REG_IMM_SCCR-CYGARC_REG_IMM_BASE)(r3)
|
| 122 |
|
|
lwi r4, 0x900000
|
| 123 |
|
|
stw r4, (CYGARC_REG_IMM_PLPRCR-CYGARC_REG_IMM_BASE)(r3)
|
| 124 |
|
|
|
| 125 |
|
|
// Enable the time base and set the freeze flag
|
| 126 |
|
|
lwi r4, 0x03
|
| 127 |
|
|
sth r4, (CYGARC_REG_IMM_TBSCR-CYGARC_REG_IMM_BASE)(r3)
|
| 128 |
|
|
|
| 129 |
|
|
// Unlock the RTC register set
|
| 130 |
|
|
lwi r4, 0x55ccaa33
|
| 131 |
|
|
stw r4, (CYGARC_REG_IMM_RTCSCK-CYGARC_REG_IMM_BASE)(r3)
|
| 132 |
|
|
// RTC is clocked by 4MHz crystal, set the freeze flag
|
| 133 |
|
|
lwi r4, 0x12
|
| 134 |
|
|
sth r4, (CYGARC_REG_IMM_RTCSC-CYGARC_REG_IMM_BASE)(r3)
|
| 135 |
|
|
// Set the freeze flag for the Periodic interrupt timer
|
| 136 |
|
|
lwi r4, 0x02
|
| 137 |
|
|
sth r4, (CYGARC_REG_IMM_PISCR-CYGARC_REG_IMM_BASE)(r3)
|
| 138 |
|
|
|
| 139 |
|
|
lwi r4, 0x00
|
| 140 |
|
|
lwi r5, (CYGARC_REG_IMM_DPTMCR-CYGARC_REG_IMM_BASE)
|
| 141 |
|
|
sthx r4, r3, r5
|
| 142 |
|
|
|
| 143 |
|
|
lwi r4, 0xffa0
|
| 144 |
|
|
lwi r5, (CYGARC_REG_IMM_RAMBAR-CYGARC_REG_IMM_BASE)
|
| 145 |
|
|
sthx r4, r3, r5
|
| 146 |
|
|
|
| 147 |
|
|
lwi r4, 0x00
|
| 148 |
|
|
lwi r5, (CYGARC_REG_IMM_PORTQS-CYGARC_REG_IMM_BASE)
|
| 149 |
|
|
sthx r4, r3, r5
|
| 150 |
|
|
|
| 151 |
|
|
lwi r4, 0x00
|
| 152 |
|
|
lwi r5, (CYGARC_REG_IMM_PQSPAR_DDRQST-CYGARC_REG_IMM_BASE)
|
| 153 |
|
|
sthx r4, r3, r5
|
| 154 |
|
|
lwi r5, (CYGARC_REG_IMM_MPIOSMDR-CYGARC_REG_IMM_BASE)
|
| 155 |
|
|
sthx r4, r3, r5
|
| 156 |
|
|
lwi r5, (CYGARC_REG_IMM_MPIOSMDDR-CYGARC_REG_IMM_BASE)
|
| 157 |
|
|
sthx r4, r3, r5
|
| 158 |
|
|
lwi r5, (CYGARC_REG_IMM_MIOS1TPCR-CYGARC_REG_IMM_BASE)
|
| 159 |
|
|
sthx r4, r3, r5
|
| 160 |
|
|
lwi r5, (CYGARC_REG_IMM_SRAMMCR_A-CYGARC_REG_IMM_BASE)
|
| 161 |
|
|
sthx r4, r3, r5
|
| 162 |
|
|
|
| 163 |
|
|
lwi r4, 0x00000000
|
| 164 |
|
|
lwi r5, (CYGARC_REG_IMM_SGPIODT1-CYGARC_REG_IMM_BASE)
|
| 165 |
|
|
stwx r4, r3, r5
|
| 166 |
|
|
lwi r5, (CYGARC_REG_IMM_SGPIODT2-CYGARC_REG_IMM_BASE)
|
| 167 |
|
|
stwx r4, r3, r5
|
| 168 |
|
|
lwi r5, (CYGARC_REG_IMM_SGPIOCR-CYGARC_REG_IMM_BASE)
|
| 169 |
|
|
stwx r4, r3, r5
|
| 170 |
|
|
lwi r5, (CYGARC_REG_IMM_EMCR-CYGARC_REG_IMM_BASE)
|
| 171 |
|
|
stwx r4, r3, r5
|
| 172 |
|
|
|
| 173 |
|
|
// Enable 32 interrupt priorities on the IMB3 unit
|
| 174 |
|
|
lwi r4, 0x60000000
|
| 175 |
|
|
lwi r5, (CYGARC_REG_IMM_UMCR-CYGARC_REG_IMM_BASE)
|
| 176 |
|
|
stwx r4, r3, r5
|
| 177 |
|
|
#endif
|
| 178 |
|
|
|
| 179 |
|
|
sync
|
| 180 |
|
|
blr
|
| 181 |
|
|
|
| 182 |
|
|
#------------------------------------------------------------------------------
|
| 183 |
|
|
# end of cme555.S
|
