Subversion Repositories openrisc

# ====================================================================

#

#      hal_powerpc_quicc.cdl

#

#      PowerPC/QUICC HAL package configuration data

#

# ====================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

## Copyright (C) 2002, 2003 Gary Thomas

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

# ====================================================================

######DESCRIPTIONBEGIN####

#

# Author(s):      jskov

# Original data:  hmt

# Contributors:

# Date:           1999-11-02

#

#####DESCRIPTIONEND####

#

# ====================================================================

cdl_package CYGPKG_HAL_QUICC {

    display  "Motorola MPC8xx PowerQUICC support"

    parent        CYGPKG_HAL_POWERPC

    define_header hal_powerpc_quicc.h

    include_dir   cyg/hal/quicc

    description   "

           The QUICC package provides some of the support needed

           to run eCos on a Motorola MPC8xx (MBX) board, using the QUICC

           feature of the MPC860 and MPC821 CPUs.

           Currently only serial IO via SMC1/2 and SCC1 is provided by

           this package."

    define_proc {

        puts $::cdl_system_header "#define CYGBLD_HAL_VARIANT_H  "

    }

    cdl_interface CYGNUM_HAL_QUICC_SMC1 {

        display    "SMC1 is available for serial I/O"

        description "

          This interface indicates that SMC1 can be outfitted as

          a serial device."

    }

    cdl_interface CYGNUM_HAL_QUICC_SMC2 {

        display    "SMC2 is available for serial I/O"

        description "

          This interface indicates that SMC2 can be outfitted as

          a serial device."

    }

    cdl_interface CYGNUM_HAL_QUICC_SCC1 {

        display    "SCC1 is available for serial I/O"

        description "

          Most MPC8xx chipsets use SCC1 to drive the ethernet controller.

        On some newer (e.g. 860T) chips, SCC1 can be used for general

        serial since there is a separate ethernet machine."

    }

    cdl_interface CYGNUM_HAL_QUICC_SCC2 {

        display    "SCC2 is available for serial I/O"

        description "

          Port SCC2 is available for serial I/O"

    }

    cdl_interface CYGNUM_HAL_QUICC_SCC3 {

        display    "SCC3 is available for serial I/O"

        description "

          Port SCC3 is available for serial I/O"

    }

    compile       quicc_smc1.c cpm.c

   cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {

       display      "Number of communication channels on the board"

       flavor       data

       calculated   CYGNUM_HAL_QUICC_SMC1+CYGNUM_HAL_QUICC_SMC2+CYGNUM_HAL_QUICC_SCC1+CYGNUM_HAL_QUICC_SCC2+CYGNUM_HAL_QUICC_SCC3

   }

   cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {

       display          "Debug serial port"

       active_if        CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE

       flavor data

       legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1

       default_value    0

       description      "

           This option chooses which port will be used to connect to a host

           via the GDB remote protocol."

    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {

        display          "Diagnostic serial port"

        active_if        CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE

        flavor data

        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1

        default_value    0

        description      "

           This option chooses which port will be used for diagnostic output."

    }

    # This option is only used when USE_ROM_MONITOR is enabled - but

    # it cannot be a sub-option to that option, since the code uses the

    # definition in a preprocessor comparison.

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_ROM_DEBUG_CHANNEL {

        display          "Debug serial port used by ROM monitor"

        flavor data

        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1

        default_value    0

        description      "

            If a platform has multiple serial ports, then this

            option tells the code which port is in use by the ROM

            monitor. It should only be necessary to change this

            option if a non-standard configurated eCos GDB stub is

            used."

    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {

        display       "Baud rate for the HAL diagnostic port"

        flavor        data

        legal_values  { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600

                      4800 7200 9600 14400 19200 38400 57600 115200 230400

        }

        default_value 38400

        description   "

            This option specifies the default baud rate (speed) for the

            HAL diagnostic port."

    }

}