Subversion Repositories openrisc_me

2003-04-10  Nick Garnett  

        * src/sh.ld:

        Added entry for .stack section in data section.

2003-01-31  Mark Salter  

        * src/hal_syscall.c (hal_syscall_handler): Let generic syscall code

        handle exit.

2002-08-02  Andrew Lunn 

        * cdl/hal_sh.cdl: The Redboot exec command can now be

          disabled by CDL

2002-04-30  Jesper Skov  

        * include/hal_var_sp.inc: Allow variant to provide custom

        interrupt vector layout. This means the size of

        hal_interrupt_handlers/objects/data can be reduced if the vector

        layout is sparse. Something similar could be done for

        _HW_EXEC_ENTRY_TABLE, saving exception_vector_int entries in the

        $vectors_code block. However, this code usually resides in flash

        so there's not much point given todays flash block sizes.

        * cdl/hal_sh.cdl: Added CYGHWR_HAL_SH_FPU and

        CYGHWR_HAL_SH_NO_FPU, allowing an arch level control of FPU

        related tests.

        Skipping test handled in a different way now, so the implements

        statement has been deleted again.

2002-04-29  Jesper Skov  

        * include/hal_var_bank.inc: Define hal_exception_entry_extras and

        hal_interrupt_entry_extras.

        * include/hal_var_sp.inc: Define hal_exception_entry_extras and

        hal_interrupt_entry_extras. Disable interrupts on exception

        entry.

        * src/vectors.S: Call hal_exception_entry_extras and

        hal_interrupt_entry_extras.

2002-04-29  Jonathan Larmour  

        * src/vectors.S:

        Don't use .file as it can confuse debugging since the .file

        doesn't contain the path and therefore the debugger will never

        know where it lives! This conflicts with using -Wa,--gstabs.

2002-04-15  Jonathan Larmour  

        * src/hal_syscall.c (hal_syscall_handler): Add extra sig argument to

        __do_syscall.

2002-04-22  Jesper Skov  

        * include/hal_var_sp.inc: 7044 needs different vector layout than

        76xx since its vectors are hardwired.

2002-04-18  Jesper Skov  

        * include/hal_var_sp.inc: Do no translation of entry address if

        cache module defines CYGARC_SH_MOD_CAC_NO_WINDOWS.

        * include/hal_intr_vecs.h: Move all vectors after IRQ7 to variant

        header. Define _IRQ and _LVL for all of the first 7

        interrupts. Define CYGNUM_HAL_INTERRUPT_LVL_MAX

2002-03-06  Jesper Skov  

        * include/hal_var_sp.inc: Fix asm comments.

2002-02-28  Jesper Skov  

        * src/hal_syscall.c (hal_syscall_handler): Added.

        * src/sh_stub.c (__is_bsp_syscall): Added.

        * cdl/hal_sh.cdl: Build hal_syscall.c

2002-02-27  Jesper Skov  

        * src/sh_stub.c (__computeSignal): Changed to use DATA_ACCESS

        names as well.

        * include/hal_intr_vecs.h (_CYGNUM_HAL_VECTOR_FIRST_MEM_FAULT,

        _CYGNUM_HAL_VECTOR_LAST_MEM_FAULT): Same.

2002-02-26  Jesper Skov  

        * include/hal_intr_vecs.h: Use DATA_ACCESS vector names instead of

        ADDRESS_ERROR names.

2002-02-15  Jesper Skov  

        * src/sh_stub.c (__single_step): Use normal breakpoint instruction

        (trapa #32) for single-stepping.

        On the SH2 the use of trapa#255 causes a different (and unhandled)

        exception, in the range reserved for application

        exceptions/interrupts.

2002-02-14  Jesper Skov  

        * include/hal_var_bank.h: Switch mach/macl entries.

        * include/hal_var_sp.h: Same.

        * include/hal_var_sp.inc: Reserve (additional) trampoline for NMI

        to make eCos interrupt numbers match. Make traps use trap numbers

        32-64.

        (hal_cpu_save_regs): Remember to adjust SP for R0 save location.

        (hal_cpu_restore_regs_return): Rewritten to fix errors and allow

        SP to be changed from GDB.

2002-02-13  Jesper Skov  

        * src/context.S (hal_thread_load_context): Load up stack pointer

        before enabling interrupts.

        * include/hal_var_sp.inc: Fetch the VSR pointer and jump to it

        instead of into the VSR table.

        (hal_cpu_restore_regs_return): adjust sp to point to exception

        state before returning.

2002-02-08  Jesper Skov  

        * src/vectors.S: tweak ROMRAM relocation code.

2002-02-07  Jesper Skov  

        * include/hal_var_sp.inc: Moved _reset code to below vectors.

2002-01-17  Jesper Skov  

        * include/hal_var_bank.inc: Include SH3 register references. Make

        better use of some delay slots.

        * src/vectors.S: Don't save exception/interrupt state on stack

        with debug markers. Load up event value in R4 before calling

        hal_intc_decode so it can be a nop if desired. Removed some SH3

        register references.

        * include/hal_var_sp.inc: Include SH2 offsets, export

        _HW_EXC_ENTRY_TABLE, fix some typos.

        * include/hal_intr_vecs.h: IRL vectors renamed. Added IRQ

        vectors.

2002-01-16  Jesper Skov  

        * include/hal_var_bank.h: Fix typo.

        * src/sh_stub.c (__computeSignal): Only handle defined vectors.

        * include/hal_intr_vecs.h: Decode NMI as interrupt 0, moved all

        other vectors. Provide MEM_FAULT vector range.

        * include/hal_var_sp.inc: Changes for NMI-as-interrupt-0.

        * include/hal_var_sp.h: Renamed vector to event to share code.

        * include/hal_intr_excevt.h: Added MEM_FAULT vector ranges and

        CYGHWR_SH_RTC_TIMER_IS_TMU.

        * src/hal_misc.c (hal_delay_us): Only build if

        CYGHWR_SH_RTC_TIMER_IS_TMU. Use MEM_FAULT vector range.

        * include/hal_intr.h: Deleted clock controls.

        * cdl/hal_sh.cdl: Use CYGNUM_HAL_RTC_PRESCALE instread of

        module-specific prescale variable.

        * include/hal_intr_excevt.h (_CYGNUM_HAL_VECTOR_FIRST_MEM_FAULT,

        _CYGNUM_HAL_VECTOR_LAST_MEM_FAULT): Define.

        * include/hal_intr_vecs.h: Same.

        * src/hal_misc.c (cyg_hal_exception_handler): Use new _MEM_FAULT

        vector range.

        * include/hal_intr_vecs.h: Removed RTC code.

        * include/hal_arch.h: Changed breakpoint instruction to match that

        used in GDB 5.1.

        It also makes better sense on the SH2.

        * include/hal_intr_excevt.h: Interrupt/exception vectors and clock

        handling code moved here...

        * include/hal_intr.h: From here.

        * include/hal_intr_vecs.h: Interrupt/exception vector layout +

        clock handling for SH1/SH2 variants.

        * include/hal_var_sp.inc: Added some comments, fixed number of

        pre-VSR vectors, renamed HW_VSR_TABLE to HW_EXC_ENTRY_TABLE to

        avoid confusion (it has nothing to do with eCos VSRs). Finally,

        made the pre-VSR stuff only compile when really required (since

        it's 4KiB).

2002-01-14  Jesper Skov  

        * include/hal_arch.h: Moved HAL_SavedRegisters structure to

        bank variant headers. Same with HAL_THREAD_INIT_CONTEXT,

        HAL_THREAD_GET_SAVED_REGISTERS, HAL_GET_GDB_REGISTERS,

        HAL_SET_GDB_REGISTERS, CYGARC_BUS_ADDRESS, CYGARC_CACHED_ADDRESS,

        and CYGARC_UNCACHED_ADDRESS.

        * src/vectors.S: Moved exception/interrupt entry code to bank

        variant include file.

        * include/hal_var_sp.inc: Added. Contains (new) vectors.S stuff

        for SH2.

        * include/hal_var_sp.h: Added. Contains (new) hal_arch.h stuff for

        SH2 variant.

        * include/hal_var_bank.inc: Added. Contains old vectors.S stuff

        for SH3/SH4 variants.

        * include/hal_var_bank.h: Added. Contains old hal_arch.h stuff for

        SH3/SH4 variants.

        * src/hal_mk_defs.c: Added conversion for entry stack.

2001-11-16  Nick Garnett  

        * src/hal_misc.c (hal_msbit_index): Fixed this function so that it

        actually works!

2001-10-15  David Howells  

        * cdl/hal_sh.cdl: improved the description on the RTC constants

        component.

2001-10-11  Jesper Skov  

        * src/hal_mk_defs.c (main): Fixed warning.

2001-10-01  Jonathan Larmour  

        * src/sh.ld: Make separate section for GOT and .eh_frame.

        Make macro section for all reloc sections.

        Input extras.o unconditionally.

        * cdl/hal_sh.cdl: Don't bother with -DEXTRAS=1 - unconditional now.

2001-09-12  Jesper Skov  

        * src/vectors.S: Don't include C intr header.

2001-09-11  Jonathan Larmour  

        * cdl/hal_sh.cdl (CYGHWR_HAL_SH_BIGENDIAN): Set the default

        from what the platform requests, using the new

        CYGINT_HAL_SH_PLF_LITTLEENDIAN_DEFAULT CDL interface.

        * src/sh.ld: Support .rel.got input sections.

2001-09-05  Jesper Skov  

        * src/sh_stub.c (__single_step): Changed type 2 handling.

2001-08-22  Gary Thomas  

        * src/redboot_linux_exec.c:

        printf() is no longer a part of RedBoot.  Thus all programs

        must use diag_printf() and related functions instead.

2001-07-09  Jesper Skov  

        * src/sh_stub.c: Fixed potential SH4 problem in UBC handling.

2001-07-02  Jesper Skov  

        * include/hal_arch.h: CYGARC_PHYSICAL_ADDRESS renamed to

        CYGARC_BUS_ADDRESS.

2001-06-27  Jesper Skov  

        * include/hal_arch.h: Added CPU address space translation macros.

2001-06-19  Jesper Skov  

        * src/redboot_linux_exec.c: Only base address, entry and cmdline

        options are always used. Other commands only affect image if

        set. This allows combined kernel&initrd images to be loaded in one

        file where the initrd address & size is already recorded at the

        start of the image.

        From YAEGASHI Takeshi  with a few changes:

        * cdl/hal_sh.cdl: Added RedBoot exec command options.

        * src/redboot_linux_exec.c: Added.

2001-05-29  Jesper Skov  

        * include/hal_io.h: Include var_io.h

2001-05-28  Jesper Skov  

        * src/sh.ld: Added .2ram section handling.

2001-01-26  Jesper Skov  

        * tests/intr0.c: Moved test header inclusion to proper location.

2001-01-18  Jesper Skov  

        Case 105302

        * src/vectors.S: Moved ILVL table to variant code.

        * tests/intr0.c: Added.

2001-01-04  Jesper Skov  

        * src/sh.ld: Make sure .data and .bss section sizes are aligned.

2000-12-13  Jesper Skov  

2000-12-13  Jonathan Larmour  

        * src/vectors.S (__reset): Use proper entry pointer for ROMRAM

        startup type.

2000-12-08  Jesper Skov  

        * src/vectors.S (cyg_scheduler_sched_lock): Changed to use

        SYM_PTR_REF. Brian Danilko spotted this.

2000-11-24  Jonathan Larmour  

        * src/sh.ld: _reset should be adorned with CYG_LABEL_DEFN

        * src/vectors.S: CYG_LABEL_DEFN should have been used everywhere

        that CYG_LABEL_NAME was used, except for the scheduler lock which

        is special as it is defined in C as an asm alias.

        * include/arch.inc: Similarly here for symbol macros

        * include/basetype.h (CYG_LABEL_NAME): Delete. This is now obsolete.

2000-11-22  Jesper Skov  

        * src/sh.ld: Added mangling to all symbols.

        * src/vectors.S: Same. Plus introduce macro to simplify (a bit)

        the definition of inline immediate constants.

        * include/sh_regs.h: Include HAL config.

        * include/hal_arch.h: Don't prefix with _ in HAL_BREAKPOINT.

        * src/sh_stub.c: Matching changes - hack to handle both

        conventions.

        * include/basetype.h: Made CYG_LABEL_DEFN depend on toolchain.

        * include/arch.inc: Added symbol ref/def macros.

        * src/context.S: Removed FUNC_START macro.

2000-11-09  Jesper Skov  

        * src/sh_stub.c (__single_step): Fix CPP problem.

2000-10-31  Jesper Skov  

        * include/mod_7707a.h: Moved to SH3 HAL.

        * include/mod_7708.h: Same.

        * include/mod_7709a.h: Same.

        * include/mod_7729.h: Same.

        * include/sh3_sci.h: Same.

        * include/sh3_scif.h: Same.

        * src/sh3_sci.c: Same.

        * src/sh3_scif.c: Same.

        * include/hal_cache.h: Moved SH3 code out to new SH3 HAL.

        * cdl/hal_sh.cdl: Same.

        * include/hal_intr.h: Same.

        * include/sh_regs.h: Same.

        * src/hal_misc.c: Same.

        * src/hal_mk_defs.c: Same.

        * src/vectors.S: Changed to support SH4. Moved CPU post-reset init

        code to variant HALs. Moved interrupt decoding to variant HAL

        macros. Moved cache code to variant HALs.

2000-10-24  Jesper Skov  

        * src/vectors.S (hal_hw_init): Added errata comment.

2000-10-23  Jesper Skov  

        * src/hal_misc.c: Always include hal_intr.h

        * src/sh3_sci.c: Use specified value for default baud rate.

        * src/sh3_scif.c: Same.

2000-10-20  Jesper Skov  

        * src/hal_misc.c: Update __mem_fault_handler declaration.

2000-10-19  Jesper Skov  

        * include/sh_regs.h (CYGARC_REG_WCR1_0WS, CYGARC_REG_WCR2_0WS):

        Added for consistent init code.

2000-10-17  Jesper Skov  

        * src/vectors.S (__reset_platform): Rearrange constants used in

        early init code.

2000-10-16  Jonathan Larmour  

        * include/hal_arch.h (CYGARC_JMP_BUF_SIZE): Define hal_jmp_buf in

        terms of this.

2000-10-11  Jesper Skov  

        * src/vectors.S (__reset_platform): Clear watchdog control flags.

        Added missing NOP in bra delay slot.

        * src/hal_misc.c (hal_delay_us): Updated to use the correct config

        constants.

        * cdl/hal_sh.cdl: Fix typo.

        * include/sh_regs.h: Added macros to compute CYGARC_RTCSR init

        values for SDRAM refresh. Needs to be backed up by generic CDL

        configury for memory controller.

2000-10-10  Jesper Skov  

        * include/sh_regs.h: Compute CPG init value for all versions.

        * include/mod_7707a.h: Added CPG version.

        * include/mod_7708.h: Same.

        * include/mod_7709a.h: Same.

        * include/mod_7729.h: Same.

        * cdl/hal_sh.cdl: Support various CPG versions.

2000-10-05  Jesper Skov  

        * src/sh_stub.c: Handle UBC versions in CPUs currently supported

        by HAL.

        * include/sh_regs.h: Added UBC version differences.

        * include/mod_7707a.h: Specify UBC version.

        * include/mod_7708.h: Ditto.

        * include/mod_7709a.h: Ditto.

        * include/mod_7729.h: Ditto.

        * src/hal_misc.c: Skip IRQ0-3 handling in IRQIRL mode.

        * include/sh_regs.h: Define interrupt controler init value.

        * src/vectors.S: Use interrupt controller init value.

        * cdl/hal_sh.cdl: Put CPU type/endian mode in a component. Added

        interrupt control options.

2000-10-03  Jesper Skov  

        * src/vectors.S: Added flush function. Changes to cache_write_mode

        function.

        * src/hal_mk_defs.c: Added cache definitions.

        * src/hal_misc.c (cyg_hal_enable_caches): Let config control cache

        init.

        * include/hal_cache.h: Added flush macro. Changes to allow

        mode function to handle different settings for the two

        controllable areas.

        * cdl/hal_sh.cdl: Added cache controls.

2000-09-26  Jesper Skov  

        * include/sh_regs.h: Added computation of initial FRQCR

        value. Made watchdog timeout time depend on the proper clock

        setting.

        * include/hal_intr.h (HAL_CLOCK_INITIALIZE): Allow timer

        prescaling to be controlled. Fix typo.

        * cdl/hal_sh.cdl: Added options to properly compute/control the

        various clock signals.

2000-09-25  Jesper Skov  

        * src/sh3_scif.c (cyg_hal_plf_scif_init_channel): Use _SCBRR_

        macros.

        * include/sh_regs.h (CYGARC_SCBRR_CKSx, CYGARC_SCBRR_N): Removed

        duplicates of the macros. Compute _CKSx properly.

2000-09-06  Gary Thomas  

        * include/mod_7729.h: Includes PFC (programmable I/O) module.

2000-09-06  Jesper Skov  

        * cdl/hal_sh.cdl: Added 7729 option.

2000-08-31  Jesper Skov  

        * include/mod_7709a.h: Added UBC definition.

        * include/mod_7708.h: Same.

        * include/mod_7729.h: Same.

        * include/mod_7707a.h: Same.

        * include/sh_regs.h: Extra UBC definitions.

        * src/sh_stub.c: If core supports UBC, use it for

        single-stepping.

2000-08-29  Jesper Skov  

        * include/mod_7729.h: Added.

2000-07-20  Jesper Skov  

        * src/sh_stub.c (__single_step): Skip trap instructions.

2000-07-18  Gary Thomas  

        * src/vectors.S (__reset): Change calculation of uncached startup

        address.

        * include/mod_7707a.h: 7707a has 32K caches (we believe).

2000-07-17  Gary Thomas  

        * src/hal_misc.c (cyg_hal_exception_handler): Handle exception caused by

        GDB stubs memory accesses.

2000-07-16  Gary Thomas  

        * include/hal_intr.h: Define HAL_DELAY_US() - see below.

        * src/hal_misc.c (hal_delay_us): New function.  Used in ROM/stand-alone

        applications when there is no kernel.

2000-07-15  Gary Thomas  

        * include/sh_regs.h: Add additional 7707 registers.

2000-07-06  Jesper Skov  

        * src/vectors.S:

        * include/mod_7707a.h:

        * include/hal_intr.h:

        * include/sh_regs.h:

        Added additional 7707 interrupt vectors.

2000-06-30  Jesper Skov  

        * src/vectors.S (__reset): Jump to VMA for RAM startup.

        (_complete_setup): Fix merge bug.

        * src/sh3_scif.c:

        * src/sh3_sci.c:

        calling i/f macro changes.

        * src/vectors.S (__reset): Fix alignment problem.

2000-06-29  Gary Thomas  

        * src/vectors.S: Reorg initialization (reset) code to be all

        in one, non-fixed location.  Required for platforms with more

        complex initialization sequences.

2000-06-29  Jesper Skov  

        * src/sh3_sci.c:

        * src/sh3_scif.c:

        Use per-channel data structure instead of code cruft.

2000-06-28  Jesper Skov  

        * include/sh3_sci.h:    [added]

        * include/sh3_scif.h:   [added]

        * include/sh3_scif.inl: [removed]

        * include/sh_sci.inl:   [removed]

        * src/sh3_sci.c:        [added]

        * src/sh3_scif.c:       [added]

        * cdl/hal_sh.cdl:

        Rewrote serial drivers for comm procs usage.

2000-06-27  Jesper Skov  

        * src/vectors.S: Added arch and platform init calls. Added ctrlc

        init call. Replaced old BREAK magic with new ctrlc magic.

        * src/sh.ld: Added extra _ on NETDEVTAB labels. Define

        hal_virtual_vector_table.

        * src/hal_misc.c: hal_default_isr moved to common HAL.

        * cdl/hal_sh.cdl: Also build simple drivers.

2000-06-21  Nick Garnett  

        * src/sh_stub.c (__is_breakpoint_function): Removed use of

        CYG_LABEL_NAME() and added underscore to _breakinst.

        * src/context.S: Switched use of CYG_LABEL_NAME() to

        CYG_LABEL_DEFN().

        * include/basetype.h: Removed definition of CYG_LABEL_NAME() and

        added CYG_LABEL_DEFN().

        * src/sh.ld: Switched to new table definition mechanism.

2000-06-15  Jesper Skov  

        * include/hal_intr.h: Added HAL_DEFAULT_ISR.

2000-06-08  Jesper Skov  

        * include/hal_arch.h (CYGARC_HAL_SAVE_GP, CYGARC_HAL_RESTORE_GP):

        Added.

        * include/mod_7708.h:

        * include/mod_7709a.h:

        * src/vectors.S:

        Minor config change to get rid of growing list of variant checks.

2000-06-08  Jesper Skov  

        * include/mod_7707a.h:

        * src/vectors.S:

        * cdl/hal_sh.cdl:

        Added first level of support for 7707A variant.

2000-06-06  Jesper Skov  

        * src/vectors.S: INTEVT2 is not defined on all variants. Protect

        accordingly. (Haruki Kashiwaya)

2000-05-08  Jesper Skov  

        * cdl/hal_sh.cdl: Make sure CPU variant definition ends up in

        system.h

2000-05-01  Jesper Skov  

        * include/mod_7709a.h:

        * include/sh_regs.h:

        Add PFC/C definitions.

2000-04-26  Jesper Skov  

        * src/hal_mk_defs.c: Added some caching data.

        * src/vectors.S:

        * include/hal_cache.h:

        Rewrote caching functions in assembly with appropriate magic to

        have the code execute out of a non-cachable memory shadow.

2000-04-25  Jesper Skov  

        * include/hal_cache.h (HAL_UCACHE_WRITE_MODE): Also wiggle the WT

        bit. It has opposite polarity of the CB bit.

2000-04-25  Jesper Skov  

        * src/vectors.S: Init IPRC-E. Force IRQ mode.

        * include/hal_intr.h: Added IRQ0-IRQ3 entries. Added simple

        interrupt configuration and acknowledge.

        * include/sh_regs.h: Added more interrupt control definitions.

2000-04-12  Jesper Skov  

        * src/vectors.S: Entry code rewritten to allow ROMRAM startups.

        * src/sh.ld: Change LMA alignment to 16 (workaround

        902557-CR). Provide vector LMA address.

        * include/sh_sci.inl: Replaced hardcoded baud rate constant with

        macro function.

        * cdl/hal_sh.cdl: Don't let interface define anything.

2000-04-10  Jesper Skov  

        * src/vectors.S: Get interrupt event code from the proper register.

        Removed some platform specific debug code. Let cyg_hal_gdb_isr

        deal with C-c issues.

        * include/sh_regs.h: Moved module registers to

        0xa0000000-0xc0000000 which is also non-cachable. The reason is

        that EVENT2 can only be accessed at 0xa4000000.

        * include/sh3_scif.inl: Read back SR before clearing it (or the

        clear don't have an effect).

        * include/hal_intr.h: Mask/unmask functions handle entire ISR

        range now.

2000-04-07  Jesper Skov  

        * include/sh3_scif.inl: Status register is 16 bit wide, not 8.

        * include/sh_regs.h: Access all module registers in the space

        0xe0000000-0xffffffff since caching is disabled here.

2000-04-06  Jesper Skov  

        * src/sh.ld (_hal_vsr_table): Get address from platform CDL.

2000-04-04  Jesper Skov  

        * include/sh3_scif.inl: Should be able to work with FIFO enabled.

        * include/sh_regs.h: Fixed RCOUNT/TCOUNT and added some comments.

2000-04-03  Jesper Skov  

        * include/sh3_scif.inl: Can drive either IRDA or SCIF module.

        * include/sh_regs.h:

        * include/mod_7709a.h:

        Added IRDA definitions (mostly a copy of SCIF definitions).

2000-03-31  Jesper Skov  

        * include/sh_regs.h: Added bit definitions for BSC.

        * include/sh3_scif.inl: Added.

        * include/hal_intr.h: Added hack to work around macro

        problem. Need to rewrite macro as inline function, but need to

        investigate a optimization problem first.

        * include/sh_regs.h: Replaced hardcoded baud rate constants with

        a macro which calculates the proper values based on baud rate

        and CPU clock speed.

        * include/sh_regs.h:

        * include/hal_intr.h (HAL_INTERRUPT_SET_LEVEL):

        Level handling for 7709a added.

        * src/vectors.S: ISR mask tables enabled per CPU variant, not

        target.

2000-03-30  Jesper Skov  

        * include/hal_intr.h: Added 7709a interrupt definitions.

2000-03-20  Jesper Skov  

        * include/sh_regs.h: Add definitions for RTC module.

2000-03-20  Jesper Skov  

        * src/hal_mk_defs.c: Added CYGNUM_HAL_VSR_EXCEPTION_COUNT

2000-03-16  Jesper Skov  

        * include/mod_7709a.h:

        * include/mod_7708.h:

        * include/sh_regs.h:

        Adding new module definitions, conditionally included depending on

        chosen CPU implementation. Each CPU defines its own set of

        included modules (and module versions).

        * include/hal_cache.h: Get cache specs from CPU module file.

        * cdl/hal_sh.cdl: Added CPU implementation controls.

2000-03-03  Jonathan Larmour  

        * include/sh_stub.h: Make C++ safe

2000-02-28  Jesper Skov  

        * src/vectors.S:

        * src/hal_mk_defs.c:

        * src/context.S:

        * include/hal_arch.h:

        * cdl/hal_sh.cdl:

        Added hal_mk_defs allowing assembly to use C symbols.

        Cleaned up setjmp/longjmp structure.

        * include/arch.inc: Added interrupt macros.

        * src/vectors.S: Leave interrupt enable to interrupt_end, ensuring

        proper use of interrupt_stack. Use range-checking instead of

        counter for switches to interrupt_stack.

        * src/context.S: Save and restore interrupt state on thread

        switches.

        * include/hal_arch.h: Set thread initial SR state to allow

        interrupts.

2000-02-18  Jesper Skov  

        * src/context.S: Fix comment character.

2000-02-16  Jesper Skov  

        * cdl/hal_sh.cdl:

        * include/basetype.h:

        Added LE support.

2000-02-15  Jesper Skov  

        * src/vectors.S: Leave vector initialization to platform. Get rid

        of stubs startup type.

        * src/sh.ld: Define hal_vsr_table address.

        * include/hal_intr.h: provide CYGNUM_HAL_VSR_EXCEPTION_COUNT.

2000-02-02  Jesper Skov  

        * src/sh.ld: Fix typo.

2000-01-28  Gary Thomas  

        * src/sh.ld: Add support for network package.

2000-01-24  Jesper Skov  

        * src/vectors.S (__interrupt_stack): Remove stubs config check for

        CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK.

1999-12-21  Jonathan Larmour  

        * include/hal_cache.h: Rename CYG_HAL_SH_SH7708 ->

        CYGPKG_HAL_SH_EDK7708

        * include/sh_regs.h: Likewise

        * src/vectors.S: Likewise

        Rename CYG_HAL_USE_ROM_MONITOR_GDB_STUBS ->

        CYGSEM_HAL_USE_ROM_MONITOR_GDB_stubs

1999-12-02  John Dallaway  

        * cdl/hal_sh.cdl:

        Use the  token in custom rules.

1999-12-01  John Dallaway  

        * cdl/hal_sh.cdl:

        Use the  token in custom rules.

1999-11-04  John Dallaway  

        * cdl/hal_sh.cdl:

        Output custom rule dependency information to .deps files in

        the current directory.

        Dispense with the need to create a 'src' sub-directory.

1999-10-29  Jesper Skov  

        * cdl/hal_sh.cdl: Added.

1999-09-01  Jesper Skov  

        * include/sh_regs.h: Added watchdog registers.

1999-07-30  Jesper Skov  

        * src/sh_stub.c (__single_step): Added handling of bt/s and bf/s.

1999-07-12  Jesper Skov  

        * src/sh_stub.c: Use UCOND_RBR_MASK instead of BRAF_MASK.

1999-07-05  Jesper Skov  

        * src/sh_stub.c (__single_step): And of bsrf.

1999-07-02  Jesper Skov  

        * src/sh_stub.c (__single_step): Added handling of braf

        instruction.

1999-06-25  Jesper Skov  

        * src/vectors.S (__startup_stack): Increased size to allow the

        twothreads example to run.

1999-06-24  Jesper Skov  

        * src/vectors.S: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS overrides use

        of stubs in ROM.

        * src/sh_stub.c (__computeSignal): Renamed _IO_ vectors to _DATA_.

1999-06-21  Jesper Skov  

        PR 20200

        * include/hal_intr.h: Renamed _IO_ error vectors to _DATA_.

        * src/vectors.S: Increased size of startup stack.

1999-06-08  Jesper Skov  

        * include/pkgconf/hal_sh.h: Added CDL for

        CYGHWR_HAL_SH_HANDLE_SPURIOUS_INTERRUPTS.

        * src/vectors.S:

        * include/hal_intr.h:

        Decode exceptions before the VSR level.

1999-06-02  Jesper Skov  

        * src/vectors.S: Cleaned up the interrupt entry/exit code.

        Made it have consistent register-bank usage.

1999-06-01  Jesper Skov  

        * src/context.S (hal_thread_switch_context): Save PC when thread

        debugging enabled.

        * src/vectors.S:

        * include/hal_arch.h:

        * include/sh.inc:

        Added handling of VBR and GBR.

        * include/hal_intr.h:

        * src/vectors.S:

        Added proper handling of nested interrupts.

        * src/vectors.S (__interrupt): Added handling of spurious event=0

        interrupts.

1999-05-31  Jesper Skov  

        * src/vectors.S: Fixed comment.

        * include/sh_sci.inl (cyg_hal_gdb_isr): Alter CR using the proper

        mask.

        * include/hal_cache.h (HAL_UCACHE_WRITE_MODE): Fixed typo.

        * src/hal_misc.c (cyg_hal_enable_caches): Enable write-back mode.

        * src/sh_stub.c (__computeSignal):

        Added proper cause->signal decoding.

        * src/sh_stub.c:

        * src/hal_misc.c:

        * include/hal_intr.h:

        * include/hal_arch.h:

        Cleaned up some FIX MEs.

        * include/sh_regs.h: Added CYGARC_REG_SCSSR_CLEARMASK.