| 1 |
27 |
unneback |
#ifndef CYGONCE_HAL_PLATFORM_INC
|
| 2 |
|
|
#define CYGONCE_HAL_PLATFORM_INC
|
| 3 |
|
|
##=============================================================================
|
| 4 |
|
|
##
|
| 5 |
|
|
## platform.inc
|
| 6 |
|
|
##
|
| 7 |
|
|
## SH/CQ7708 board assembler header file
|
| 8 |
|
|
##
|
| 9 |
|
|
##=============================================================================
|
| 10 |
|
|
#####ECOSGPLCOPYRIGHTBEGIN####
|
| 11 |
|
|
## -------------------------------------------
|
| 12 |
|
|
## This file is part of eCos, the Embedded Configurable Operating System.
|
| 13 |
|
|
## Copyright (C) 2003 Bart Veer
|
| 14 |
|
|
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
|
| 15 |
|
|
##
|
| 16 |
|
|
## eCos is free software; you can redistribute it and/or modify it under
|
| 17 |
|
|
## the terms of the GNU General Public License as published by the Free
|
| 18 |
|
|
## Software Foundation; either version 2 or (at your option) any later version.
|
| 19 |
|
|
##
|
| 20 |
|
|
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
|
| 21 |
|
|
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
| 22 |
|
|
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
| 23 |
|
|
## for more details.
|
| 24 |
|
|
##
|
| 25 |
|
|
## You should have received a copy of the GNU General Public License along
|
| 26 |
|
|
## with eCos; if not, write to the Free Software Foundation, Inc.,
|
| 27 |
|
|
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
|
| 28 |
|
|
##
|
| 29 |
|
|
## As a special exception, if other files instantiate templates or use macros
|
| 30 |
|
|
## or inline functions from this file, or you compile this file and link it
|
| 31 |
|
|
## with other works to produce a work based on this file, this file does not
|
| 32 |
|
|
## by itself cause the resulting work to be covered by the GNU General Public
|
| 33 |
|
|
## License. However the source code for this file must still be made available
|
| 34 |
|
|
## in accordance with section (3) of the GNU General Public License.
|
| 35 |
|
|
##
|
| 36 |
|
|
## This exception does not invalidate any other reasons why a work based on
|
| 37 |
|
|
## this file might be covered by the GNU General Public License.
|
| 38 |
|
|
##
|
| 39 |
|
|
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
|
| 40 |
|
|
## at http://sources.redhat.com/ecos/ecos-license/
|
| 41 |
|
|
## -------------------------------------------
|
| 42 |
|
|
#####ECOSGPLCOPYRIGHTEND####
|
| 43 |
|
|
##=============================================================================
|
| 44 |
|
|
#######DESCRIPTIONBEGIN####
|
| 45 |
|
|
##
|
| 46 |
|
|
## Author(s): jskov
|
| 47 |
|
|
## Contributors:jskov
|
| 48 |
|
|
## Date: 2000-02-02
|
| 49 |
|
|
## Purpose: SH/CQ7708 board definitions.
|
| 50 |
|
|
## Description: This file contains various definitions and macros that are
|
| 51 |
|
|
## useful for writing assembly code for the SH/CQ7708 board.
|
| 52 |
|
|
## Usage:
|
| 53 |
|
|
## #include
|
| 54 |
|
|
## ...
|
| 55 |
|
|
##
|
| 56 |
|
|
##
|
| 57 |
|
|
######DESCRIPTIONEND####
|
| 58 |
|
|
##
|
| 59 |
|
|
##=============================================================================
|
| 60 |
|
|
|
| 61 |
|
|
#include
|
| 62 |
|
|
|
| 63 |
|
|
#include
|
| 64 |
|
|
#include
|
| 65 |
|
|
|
| 66 |
|
|
#------------------------------------------------------------------------------
|
| 67 |
|
|
# Hardware initialization.
|
| 68 |
|
|
|
| 69 |
|
|
.macro hal_hardware_init
|
| 70 |
|
|
// Set up the Bus State Controller
|
| 71 |
|
|
mova BSC_settings_table,r0
|
| 72 |
|
|
mov r0,r3
|
| 73 |
|
|
1: mov.w @r3+,r0 // Address (or zero)
|
| 74 |
|
|
cmp/eq #0,r0
|
| 75 |
|
|
bt 2f
|
| 76 |
|
|
mov.w @r3+,r1 // data
|
| 77 |
|
|
bra 1b
|
| 78 |
|
|
mov.w r1,@r0 // delay slot
|
| 79 |
|
|
|
| 80 |
|
|
.align 2
|
| 81 |
|
|
|
| 82 |
|
|
BSC_settings_table:
|
| 83 |
|
|
# These are the settings set by the ROM Monitor.
|
| 84 |
|
|
|
| 85 |
|
|
.word (CYGARC_REG_FRQCR & 0x0000FFFF)
|
| 86 |
|
|
.word CYGARC_REG_FRQCR_INIT
|
| 87 |
|
|
|
| 88 |
|
|
# BCR1: Areas 3 are SDRAM
|
| 89 |
|
|
.word (CYGARC_REG_BCR1 & 0x0000FFFF)
|
| 90 |
|
|
.word 0x0010
|
| 91 |
|
|
# BCR2: Bus size of areas 2,4 are 8 bits
|
| 92 |
|
|
.word (CYGARC_REG_BCR2 & 0x0000FFFF)
|
| 93 |
|
|
.word 0x3ddc
|
| 94 |
|
|
# WCR1: 3 wait-state cycles inserted for all areas
|
| 95 |
|
|
.word (CYGARC_REG_WCR1 & 0x0000FFFF)
|
| 96 |
|
|
.word 0x3fff
|
| 97 |
|
|
# WCR2: cs0=8wait cs1=0wait cs2=0wait cs3=2wait cs4=4wait */
|
| 98 |
|
|
.word (CYGARC_REG_WCR2 & 0x0000FFFF)
|
| 99 |
|
|
.word 0x0246
|
| 100 |
|
|
# MCR: dram setting 10 bit
|
| 101 |
|
|
.word (CYGARC_REG_MCR & 0x0000FFFF)
|
| 102 |
|
|
.word 0x0074
|
| 103 |
|
|
# RTCSR: refresh timer control
|
| 104 |
|
|
.word (CYGARC_REG_RTCSR & 0x0000FFFF)
|
| 105 |
|
|
.word (0xa500 | 0x0010)
|
| 106 |
|
|
# RTCOR: refresh time constant
|
| 107 |
|
|
.word (CYGARC_REG_RTCOR & 0x0000FFFF)
|
| 108 |
|
|
.word (0xa500 | 0x003a)
|
| 109 |
|
|
|
| 110 |
|
|
# Table end
|
| 111 |
|
|
.word 0
|
| 112 |
|
|
|
| 113 |
|
|
.align 2
|
| 114 |
|
|
2:
|
| 115 |
|
|
.endm
|
| 116 |
|
|
|
| 117 |
|
|
#------------------------------------------------------------------------------
|
| 118 |
|
|
# Monitor initialization.
|
| 119 |
|
|
|
| 120 |
|
|
#ifndef CYGPKG_HAL_SH_MON_DEFINED
|
| 121 |
|
|
|
| 122 |
|
|
#if defined(CYG_HAL_STARTUP_ROM) || \
|
| 123 |
|
|
( defined(CYG_HAL_STARTUP_RAM) && \
|
| 124 |
|
|
!defined(CYGSEM_HAL_USE_ROM_MONITOR))
|
| 125 |
|
|
|
| 126 |
|
|
# If we are starting up from ROM, or we are starting in
|
| 127 |
|
|
# RAM and NOT using a ROM monitor, initialize the VSR table.
|
| 128 |
|
|
|
| 129 |
|
|
.macro hal_mon_init
|
| 130 |
|
|
mov.l $hal_vsr_table,r3
|
| 131 |
|
|
# Write exception vectors
|
| 132 |
|
|
mov.l $cyg_hal_default_exception_vsr,r4
|
| 133 |
|
|
mov #CYGNUM_HAL_VSR_EXCEPTION_COUNT,r5
|
| 134 |
|
|
1: mov.l r4,@r3
|
| 135 |
|
|
add #4,r3
|
| 136 |
|
|
dt r5
|
| 137 |
|
|
bf 1b
|
| 138 |
|
|
# Write interrupt vector
|
| 139 |
|
|
mov.l $cyg_hal_default_interrupt_vsr,r4
|
| 140 |
|
|
mov.l $hal_vsr_table,r3
|
| 141 |
|
|
add #CYGNUM_HAL_VECTOR_INTERRUPT*4,r3
|
| 142 |
|
|
mov.l r4,@r3
|
| 143 |
|
|
bra 2f
|
| 144 |
|
|
nop
|
| 145 |
|
|
.align 2
|
| 146 |
|
|
|
| 147 |
|
|
SYM_PTR_REF(cyg_hal_default_exception_vsr)
|
| 148 |
|
|
SYM_PTR_REF(cyg_hal_default_interrupt_vsr)
|
| 149 |
|
|
SYM_PTR_REF(hal_vsr_table)
|
| 150 |
|
|
2:
|
| 151 |
|
|
.endm
|
| 152 |
|
|
|
| 153 |
|
|
#elif defined(CYG_HAL_STARTUP_RAM) && defined(CYGSEM_HAL_USE_ROM_MONITOR)
|
| 154 |
|
|
|
| 155 |
|
|
# Initialize the VSR table entries
|
| 156 |
|
|
# We only take control of the interrupt vector,
|
| 157 |
|
|
# the rest are left to the ROM for now...
|
| 158 |
|
|
|
| 159 |
|
|
.macro hal_mon_init
|
| 160 |
|
|
# Write interrupt vector
|
| 161 |
|
|
mov.l $hal_vsr_table,r3
|
| 162 |
|
|
mov.l $cyg_hal_default_interrupt_vsr,r4
|
| 163 |
|
|
add #CYGNUM_HAL_VECTOR_INTERRUPT*4,r3
|
| 164 |
|
|
mov.l r4,@r3
|
| 165 |
|
|
bra 2f
|
| 166 |
|
|
nop
|
| 167 |
|
|
.align 2
|
| 168 |
|
|
|
| 169 |
|
|
SYM_PTR_REF(cyg_hal_default_interrupt_vsr)
|
| 170 |
|
|
SYM_PTR_REF(hal_vsr_table)
|
| 171 |
|
|
2:
|
| 172 |
|
|
.endm
|
| 173 |
|
|
|
| 174 |
|
|
#else
|
| 175 |
|
|
|
| 176 |
|
|
.macro hal_mon_init
|
| 177 |
|
|
.endm
|
| 178 |
|
|
|
| 179 |
|
|
#endif
|
| 180 |
|
|
|
| 181 |
|
|
|
| 182 |
|
|
#define CYGPKG_HAL_SH_MON_DEFINED
|
| 183 |
|
|
|
| 184 |
|
|
#endif // CYGPKG_HAL_SH_MON_DEFINED
|
| 185 |
|
|
|
| 186 |
|
|
#endif // CYGONCE_HAL_PLATFORM_INC
|
