Subversion Repositories openrisc

# ====================================================================

#

#      hal_sh_sh2.cdl

#

#      SH2 variant HAL package configuration data

#

# ====================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

# ====================================================================

######DESCRIPTIONBEGIN####

#

# Author(s):      jskov

# Original data:  jskov

# Contributors:

# Date:           2002-01-09

#

#####DESCRIPTIONEND####

#

# ====================================================================

cdl_package CYGPKG_HAL_SH_SH2 {

    display       "SH2 variant"

    parent        CYGPKG_HAL_SH

    hardware

    include_dir   cyg/hal

    define_header hal_sh_sh2.h

    description   "

        The SH2 (SuperH 2) variant HAL package provides generic

        support for SH2 variant CPUs."

    requires      CYGHWR_HAL_SH_BIGENDIAN

    define_proc {

        puts $::cdl_system_header "#define CYGBLD_HAL_VARIANT_H   "

        puts $::cdl_header "#define CYGBLD_HAL_VAR_EXCEPTION_MODEL_H   "

        puts $::cdl_header "#define CYGBLD_HAL_VAR_EXCEPTION_MODEL_INC "

        puts $::cdl_header "#define CYGBLD_HAL_VAR_INTR_MODEL_H   "

    }

    compile       sh2_sci.c sh2_scif.c var_misc.c variant.S

    # The "-o file" is a workaround for CR100958 - without it the

    # output file would end up in the source directory under CygWin.

    # n.b. grep does not behave itself under win32

    make -priority 1 {

        /include/cyg/hal/sh2_offsets.inc : /src/var_mk_defs.c

        $(CC) $(CFLAGS) $(INCLUDE_PATH) -Wp,-MD,sh2_offsets.tmp -o var_mk_defs.tmp -S $<

        fgrep .equ var_mk_defs.tmp | sed s/#// > $@

        @echo $@ ": \\" > $(notdir $@).deps

        @tail +2 sh2_offsets.tmp >> $(notdir $@).deps

        @echo >> $(notdir $@).deps

        @rm sh2_offsets.tmp var_mk_defs.tmp

    }

    # CPU variant supported

    cdl_option CYGPKG_HAL_SH_7044 {

        display       "SH 7044 microprocessor"

        parent        CYGPKG_HAL_SH_CPU

        implements    CYGINT_HAL_SH_VARIANT

        implements    CYGINT_HAL_SH_CPG_T2

        default_value 1

        no_define

        define        -file=system.h CYGPKG_HAL_SH_7044

        description "

            The SH2 7044 microprocessor. This is an embedded part that in

            addition to the SH2 processor core has built in peripherals

            such as memory controllers, serial ports, and timers/counters.

            It also has some amount of flash memory."

        define_proc {

            puts $cdl_system_header "#define CYGBLD_HAL_CPU_MODULES_H "

        }

    }

    cdl_option CYGPKG_HAL_SH_7615 {

        display       "SH 7615 microprocessor"

        parent        CYGPKG_HAL_SH_CPU

        implements    CYGINT_HAL_SH_VARIANT

        implements    CYGINT_HAL_SH_CPG_T1

        default_value 0

        no_define

        define        -file=system.h CYGPKG_HAL_SH_7615

        description "

            The SH2 7615 microprocessor. This is an embedded part that in

            addition to the SH2 processor core has built in peripherals

            such as memory controllers, serial ports, timers/counters, and

            ethernet controller."

        define_proc {

            puts $cdl_system_header "#define CYGBLD_HAL_CPU_MODULES_H "

        }

    }

    cdl_component CYGHWR_HAL_SH_CLOCK_SETTINGS {

        display          "SH on-chip generic clock controls"

        description      "

            The various clocks used by the system are controlled by

            these options, some of which are derived from platform

            settings."

        flavor        none

        no_define

        cdl_interface CYGINT_HAL_SH_CPG_T1 {

            display     "Clock pulse generator type 1"

        }

        cdl_interface CYGINT_HAL_SH_CPG_T2 {

            display     "Clock pulse generator type 2"

        }

        cdl_option CYGHWR_HAL_SH_FRT_PRESCALE {

            display       "FRT prescaling"

            description   "

                The free running timer used for

                the real-time clock is prescaled by this factor."

            flavor        data

            active_if     CYGINT_HAL_SH_CPG_T1

            legal_values  { 8 32 128 }

            default_value 8

        }

        cdl_option CYGHWR_HAL_SH_CMT_PRESCALE {

            display       "CMT prescaling"

            description   "

                The Compare Match Timer used for

                the real-time clock is prescaled by this factor."

            flavor        data

            active_if     CYGINT_HAL_SH_CPG_T2

            legal_values  { 8 32 128 512 }

            default_value 8

        }

        cdl_option CYGHWR_HAL_SH_RTC_PRESCALE {

            display       "eCos RTC prescaling"

            flavor        data

            calculated    { CYGHWR_HAL_SH_FRT_PRESCALE ? CYGHWR_HAL_SH_FRT_PRESCALE :

                            CYGHWR_HAL_SH_CMT_PRESCALE ? CYGHWR_HAL_SH_CMT_PRESCALE :

                          }

        }

        cdl_option CYGHWR_HAL_SH_CLOCK_CKIO {

            display    "CKIO clock"

            no_define

            flavor     data

            # CKIO is either XTAL (input = PLL2 disabled) or PLL2 output

            calculated { CYGINT_HAL_SH_CPG_T1 ? (

                             (CYGHWR_HAL_SH_OOC_CLOCK_MODE >= 4 && CYGHWR_HAL_SH_OOC_CLOCK_MODE <= 6)

                             ? (CYGHWR_HAL_SH_OOC_XTAL)

                             : CYGHWR_HAL_SH_PLL2_OUTPUT

                         )

                         : CYGINT_HAL_SH_CPG_T2 ? (

                             CYGHWR_HAL_SH_OOC_XTAL

                         )

                         : 0 }

        }

        cdl_option CYGHWR_HAL_SH_PLL1_OUTPUT {

            display    "The clock output from PLL1"

            no_define

            flavor     data

            calculated { CYGHWR_HAL_SH_CLOCK_CKIO * CYGHWR_HAL_SH_OOC_PLL_1 }

        }

        cdl_option CYGHWR_HAL_SH_PLL2_OUTPUT {

            display    "The clock output from PLL2"

            no_define

            flavor     data

            calculated { CYGINT_HAL_SH_CPG_T1 ? (

                             (CYGHWR_HAL_SH_OOC_XTAL * CYGHWR_HAL_SH_OOC_PLL_2)

                         )

                         : CYGINT_HAL_SH_CPG_T2 ? (

                             (CYGHWR_HAL_SH_OOC_XTAL * CYGHWR_HAL_SH_OOC_PLL)

                         )

                         : 0 }

        }

        cdl_option CYGHWR_HAL_SH_PROCESSOR_SPEED {

            display          "Processor clock speed (MHz)"

            flavor           data

            calculated       { CYGHWR_HAL_SH_PLL2_OUTPUT / CYGHWR_HAL_SH_OOC_DIVM }

            description      "

                The core (CPU, cache and MMU) speed is computed from

                the input clock speed and the divider DIVM setting."

        }

        cdl_option CYGHWR_HAL_SH_BOARD_SPEED {

            display          "Platform bus clock speed (MHz)"

            flavor           data

            calculated       { CYGHWR_HAL_SH_CLOCK_CKIO }

            description      "

                The platform bus speed is CKIO."

        }

        cdl_option CYGHWR_HAL_SH_ONCHIP_PERIPHERAL_SPEED {

            display          "Processor on-chip peripheral clock speed (MHz)"

            flavor           data

            calculated       { CYGHWR_HAL_SH_PLL2_OUTPUT / CYGHWR_HAL_SH_OOC_DIVP }

            description      "

                The peripheral speed is computed from the input clock

                speed and the divider DIVP setting."

        }

    }

    cdl_option CYGNUM_HAL_SH_SH2_SCI_BAUD_RATE {

        display          "SCI serial port default baud rate"

        flavor data

        legal_values     { 4800 9600 14400 19200 38400 57600 115200 }

        default_value    { CYGNUM_HAL_SH_SH2_SCI_BAUD_RATE_DEFAULT ? \

                           CYGNUM_HAL_SH_SH2_SCI_BAUD_RATE_DEFAULT : 38400 }

        description      "

           This controls the default baud rate used for communicating

           with GDB / displaying diagnostic output."

    }

    cdl_option CYGNUM_HAL_SH_SH2_SCIF_BAUD_RATE {

        display          "SCIF serial ports default baud rate"

        flavor data

        legal_values     { 4800 9600 14400 19200 38400 57600 115200 }

        default_value    { CYGNUM_HAL_SH_SH2_SCIF_BAUD_RATE_DEFAULT ? \

                           CYGNUM_HAL_SH_SH2_SCIF_BAUD_RATE_DEFAULT : 38400 }

        description      "

           This controls the default baud rate used for communicating

           with GDB / displaying diagnostic output."

    }

    cdl_option CYGHWR_HAL_SH_SH2_SCIF_ASYNC_RXTX {

        display          "SCIF should support async RX/TX"

        default_value    0

        description      "

            Some transceiver modes require the transmitter and

            receiver to never be enabled at the same time. Enabling

            this option lets clients enable async mode."

    }

    cdl_option CYGHWR_HAL_SH_SH2_SCIF_IRDA_TXRX_COMPENSATION {

        display          "SCIF IrDA TX/RX switch compensation"

        default_value    1

        description      "

            When switching from TX mode to RX mode, the controller causes

            a spurious 0xff character to be received at speeds up to

            57600 baud. At higher baud rates, more spurious characters

            may be received. Enabling this option tries to remove the

            spurious characters, but since there are no errors reported

            from the controller, it is impossible to do so with any kind

            of precision.

            Having this option enabled makes RedBoot usable. There is a

            matching option in the eCos serial driver controlling a

            similar kludge, allowing some eCos serial tests to run.

            It is an incomplete kludge however, and for any real use of

            the IrDA mode for data transmission, the option should be

            disabled, and a protocol capable of handling the spurious

            receive characters must be used on top of the driver.

            Note that the problem is exaggerated when the baud rate is

            changed."

    }

    cdl_component CYGPKG_HAL_SH_INTERRUPT {

        display          "Interrupt controls"

        flavor     none

        no_define

        description      "

            Initial interrupt settings can be specified using these option."

        cdl_option CYGHWR_HAL_SH_IRQ_HANDLE_SPURIOUS_INTERRUPTS {

            display          "Handle spurious interrupts"

            default_value    0

            description      "

               The SH2 may generate spurious interrupts with INTEVT = 0

               when changing the BL bit of the status register. Enabling

               this option will cause such interrupts to be identified

               very early in the interrupt handler and be ignored.  Given

               that the SH HAL uses the I-mask to control interrupts,

               these spurious interrupts should not occur, and so there

               should be no reason to include the special handling code."

        }

        cdl_option CYGHWR_HAL_SH_IRQ_USE_IRQLVL {

            display          "Use IRQ0-3 pins as IRL input"

            default_value    0

            description      "

                It is possible for the IRQ0-3 pins to be used as IRL

                inputs by enabling this option."

        }

        cdl_option CYGHWR_HAL_SH_IRQ_ENABLE_IRLS_INTERRUPTS {

            display          "Enable IRLS interrupt pins"

            default_value    0

            active_if        CYGHWR_HAL_SH_IRQ_USE_IRQLVL

            description      "

                IRLS interrupt pins must be specifically

                activated. When they are, they will cause the same

                type of interrupt as those caused by the IRL pins. If

                IRL and IRLS pins signal an interrupt at the same

                time, the highest level interrupt will be generated.

                Only available on some cores, and probably share pins

                with other interrupt sources (PINT) which cannot be

                used in this configuration."

        }

    }

    # Cache settings

    cdl_option CYGHWR_HAL_SH_CACHE_MODE {

        display       "Select cache mode set at startup"

        parent        CYGPKG_HAL_SH_CACHE

        default_value { "WRITE_BACK" }

        legal_values  { "WRITE_BACK" "WRITE_THROUGH" }

        flavor        data

        description "

            Controls what cache mode the cache should be put in at

            startup. Write-back mode improves

            performance by letting dirty data to be kept in the

            cache for a period of time, allowing mutiple writes to

            the same cache line to be written back to memory in

            one memory transaction. In Write-through mode, each

            individual write will cause a memory transaction."

    }

}