Subversion Repositories openrisc

/*

 *  MicroTouch touch panel driver for MicroTouch capacitive and resistive

 *  controllers at RS232 port.

 *

 *  We expect the Microtouch Controller configured to 9600 Baud, 8 data bits,

 *  1 stop bit, no parity

 *

 *  Written by Holger Waechtler <hwaechtler@users.sourceforge.net>

 */

#include <stdio.h>

#include <stdlib.h>

#include <unistd.h>

#include <fcntl.h>

#include <termios.h>

#include "device.h"

static int      MT_Open(MOUSEDEVICE *pmd);

static void     MT_Close(void);

static int      MT_GetButtonInfo(void);

static void     MT_GetDefaultAccel(int *pscale,int *pthresh);

static int      MT_Read(MWCOORD *dx, MWCOORD *dy, MWCOORD *dz, int *bp);

MOUSEDEVICE mousedev = {

        MT_Open,

        MT_Close,

        MT_GetButtonInfo,

        MT_GetDefaultAccel,

        MT_Read,

        NULL

};

static int mt_fd;

#define CMD(fd,x) \

   do { \

      write (fd, "\001" x "\r", strlen(x) + 2); \

      tcdrain(fd); \

   } while (0)

/*

 * Open up the mouse device.

 */

static int

MT_Open(MOUSEDEVICE *pmd)

{

   char *devname = "/dev/ttyS0";

   struct termios termios;

   if ((mt_fd = open (devname, O_RDWR | O_NONBLOCK)) < 0) {

      fprintf (stderr, "error opening '%s'\n", devname);

      exit (-1);

   }

   tcgetattr (mt_fd, &termios);

   cfsetispeed (&termios, B9600);

   cfsetospeed (&termios, B9600);

   cfmakeraw (&termios);

   termios.c_cflag &= ~CBAUD;

   termios.c_cflag = B9600;

   termios.c_cflag |= CS8 | CREAD;

   termios.c_oflag = 0;

   termios.c_oflag &= ~(OCRNL | ONLRET);

   tcsetattr (mt_fd, TCSAFLUSH, &termios);

   CMD(mt_fd,"R");

   CMD(mt_fd,"AD");

   CMD(mt_fd,"PN812");

   CMD(mt_fd,"FT");

   CMD(mt_fd,"MS");

   CMD(mt_fd,"PL");

  /*

   *  This is a sort of hack, but our embedded PPC was to slow to read all

   *  responses from the Microtouch controller. To get out of this we simply

   *  discard them ...

   */

   usleep (250000);

   tcflush (mt_fd, TCIOFLUSH);

   return 0;

}

/*

 * Close the mouse device.

 */

static void

MT_Close(void)

{

   if (mt_fd > 0)

      close (mt_fd);

   mt_fd = 0;

}

/*

 * Get mouse buttons supported

 */

static int

MT_GetButtonInfo(void)

{

   return MWBUTTON_L;

}

/*

 * doesn't makes sense for a touch panel ...

 */

static void

MT_GetDefaultAccel(int *pscale,int *pthresh)

{

   *pscale = 3;

   *pthresh = 5;

}

char buf [5];

int bytes_in_buf = 0;

/*

 * Attempt to read bytes from the mouse and interpret them.

 * Returns -1 on error, 0 if either no bytes were read or not enough

 * was read for a complete state, or 1 if the new state was read.

 * When a new state is read, the current buttons and x and y deltas

 * are returned.  This routine does not block.

 */

static int

MT_Read(MWCOORD *dx, MWCOORD *dy, MWCOORD *dz, int *bp)

{

   if (bytes_in_buf == 5) {

      bytes_in_buf = 0;

      *dx = ((buf[1] & 0x7f) | ((buf[2] & 0x7f) << 7));

      *dy = ((buf[3] & 0x7f) | ((buf[4] & 0x7f) << 7));

      *dx = (*dx * scrdev.xvirtres) >> 14;

      *dy = scrdev.yvirtres - ((*dy * scrdev.yvirtres) >> 14);

      *dz = 1;

      if (!(buf[0] & (1 << 6)))

         *bp = 0;

      else

         *bp = MWBUTTON_L;

      return 2;

   }

   if (read (mt_fd, buf + bytes_in_buf, 1) == 1)

      bytes_in_buf++;

   if ((buf[bytes_in_buf-1] & 0x80) != 0) {

      buf [0] = buf [bytes_in_buf-1];

      bytes_in_buf = 1;

   }

   return 0;

}