Subversion Repositories openrisc_2011-10-31

eCos Cross-platform Configuration Tool

Copyright (c) Red Hat Inc., 2001-2002

======================================

Version 2

=========

Contents

  * Introduction

  * What's in this release?

  * Installing the Configuration Tool

  * Running the Configuration Tool

  * Frequently Asked Questions

  * Building the Configuration Tool under Linux

  * Building the Configuration Tool under Windows

Introduction

============

  Welcome to the eCos Configuration Tool, a graphical tool to

  help a user configure and build a custom version of the

  eCos operating system.

  This is a cross-platform version built using the wxWindows

  toolkit. The tool uses the GTK+ widget set on Linux, and the

  WIN32 API on Windows 9x, Windows NT and Windows 2000. It is

  similar to the MFC, Windows-only version but at present lacks

  a few of its features, such as the Memory Layout Tool and the

  ability to run tests from within the tool.

  Please note that this is alpha-level code. However, all feedback to

  the eCos team is appreciated, via ecos-discuss@sources.redhat.com or the

  bug reporting form at http://sources.redhat.com/ecos/problemreport.html.

  These are the instructions for running and building the eCos

  Configuration Tool for Linux and Windows.

What's in this release?

=======================

  This version allows you to edit, load, save and build eCos

  configurations much as the original Windows Configuration Tool.

  However the following features are missing with respect to the

  original tool:

  - Memory Layout Tool

  - Administration functionality (initial code present but untested)

  - Gauge indicating time left to build library and tests

  The following features are present in the new tool but not in the

  original tool:

  - Repository Information dialog (available from the Help menu)

  - Most dialogs are resizeable

Documentation works a little differently. Instead of using a

precompiled HTML Help file, this version compiles a documentation

index on the fly for use with its own internal HTML help viewer. The

cached indexes are placed in the .eCosDocs directory under the

user's home directory (Linux) or in the installed repository

(Windows). The internal viewer cannot cope with all of the eCos

and GNUPro documentation, so for these occasions please use an

external browser (see the Settings dialog).

The documentation for the Configuration Tool is supplied in its

install directory as HTML only, and is a modified version of the

eCos User's Guide. Invoke the tool help from the

"Help|Configuration Tool Help" menu item, or from the internal

help viewer's index, under "Linux Configuration Tool Guide".

Known bugs:

  - The documentation index only lists the packages in the

    configuration active when the documentation was indexed

    (normally when the repository is first seen by the

    Configuration Tool).

Version History

---------------

See CHANGES.txt.

Installing the Configuration Tool

=================================

  The Configuration Tool can be used with existing eCos

  installations and CVS source hierarchies. You can get the

  binaries from ftp://sources.redhat.com/pub/ecos/ct2/.

  See also mirror sites at:

        http://sources.redhat.com/ecos/mirror.html

        http://sources.redhat.com/mirrors.html

  Please try to use a mirror site close to you, as it will be

  faster.

  *** Under Linux:

  Download:

  ftp://sources.redhat.com/pub/ecos/ct2/configtool-2.0-i386.tar.gz

  (or similar name).

  Unarchive the tar file into a suitable directory and add the

  directory to your path. You do not have to install it as root.

  For example:

  % mkdir -p /opt/ecos/configtool/bin

  % cd /opt/ecos/configtool/bin

  % tar xvfz /cdrom/configtool-2.0.tar.gz

  % export PATH=/opt/ecos/configtool/bin:$PATH

  The following files will be extracted to the installation directory:

  configtool

  configtool.bin

  README.txt

  license.txt

  ecosplatforms.tar.gz

  manual/

  Optionally, untar the contents of ecosplatforms.tar.gz into your

  home directory, where it will create a directory called

  .eCosPlatforms. The information in these files isn't yet used

  by the Configuration Tool, but will keep the tool from

  generating some warnings.

  The executable is statically linked to the wxWindows library,

  but does require the GTK+ 1.2, GDK 1.2 and Tcl 8.x libraries

  to be installed.

  *** Under Windows:

  Download configtool-2.0-setup.exe (or similar name).

  Run the installer provided, preferably having installed eCos

  for Windows on your PC previously so the tool can pick up the

  relevant registry information added by the eCos installer.

  A new eCos Configuration Tool group will be added to your

  Start menu and a shortcut to the Configuration Tool will

  appear on your desktop.

Running the Configuration Tool

==============================

  Run the configtool executable and (on Linux) ignore any

  initial console messages, which may be suppressed by

  unarchiving ecosplatforms.tar.gz as per the installation

  instructions above.

  You can invoke the tool with zero, one, or two parameters. The

  two parameters can be the location of the repository and/or

  the location of a save file (extension .ecc). If no parameters

  are passed, the tool will look in the current directory for a

  save file and also (on Linux) in the /opt/ecos directory for a

  suitable repository. Failing that, the tool will use the last

  loaded repository or ask the user for a suitable location.

  For detailed information about the Configuration Tool, please

  refer to the HTML manual which may be invoked from the Help

  menu or by clicking on the "Linux Configuration Tool Guide" in

  the internal help system's contents. This is similar to but

  different from "The eCos Configuration Tool" section in the

  eCos User Guide, which refers to the original Windows version

  of the configuration tool (as opposed to the new

  cross-platform Linux and Windows version).

Frequently Asked Questions

==========================

Q:  On Linux, invoking HTML documentation for a configuration item

    doesn't seem to work.

A:  You need to have a .mailcap entry similar to the following:

    text/html; netscape -no-about-splash %s

    and in .mime.types:

    type=text/html \

    desc="HTML document" \

    exts="htm,html"

    Also, be aware that the browser can sometimes end up behind the

    configuration tool so it may have run even if you think it didn't.

Q:  On Linux, right-clicking in the configuration pane and choosing

    'What's This?' causes an information window to pop up and

    then quickly disappear.

A:  If the window manager options are set to raise a window when it gains

    the focus, the information window can get sent behind the

    application window when the popup menu loses focus. Either

    adjust your window manager settings, or use an alternate way

    of invoking help for the item: click on the arrow/question

    mark toolbar button, then on the item you are interested in.

Q:  The internal HTML help viewer doesn't display HTML correctly.

A:  The internal HTML help viewer cannot display some of the more complex

    HTML correctly, such as the GNUPro reference. We hope to

    provide the documentation in a suitable form in future, but

    for now, please use an external browser to view this

    documentation. You can use the Settings dialog, Viewers tab,

    to choose to view using an external browser.

Q:  Why does the Configuration Tool use wxWindows?

A:  wxWindows is an open source, mature multi-platform GUI

    toolkit for C++. It makes platform-independence relatively

    easy to achieve, whilst remaining compatibility with the

    look and feel of GTK+ and WIN32 on the respective platforms.

    wxWindows was chosen on its own merits but, by sheer

    coincidence, the author of the new Configuration Tool is

    also the original author of wxWindows. Using a

    platform-independent API will make it easier to port the

    Configuration Tool to other platforms if needed.

Q:  Where can I get more information about wxWindows?

A:  The wxWindows web site is at http://www.wxwindows.org.

    wxWindows distributions come with documentation in a

    variety of formats.

Q:  Does the new Configuration Tool make the old one obsolete?

A:  Not yet. The new tool doesn't yet support some features, such

    as the Memory Layout Tool. When these have been implemented,

    and the tool has been subject to the required quality assurance

    procedure, then we can retire the old tool.

Q:  How can I help improve the Configuration Tool?

A:  All help is very welcome: please see

    http://sources.redhat.com/ecos/faq.html for how to

    contribute.

Q:  Who do I contact when things go wrong?

A:  Please discuss problems on the ecos-discuss mailing list:

    see http://sources.redhat.com/ecos/intouch.html.

Q:  The compiler fails to compile dcclient.cpp. What do I do?

A:  It may be that you have a non-standard GTK+ 1.2.6 which has changes

    backported from 1.2.7. Use the makefile target 'wxgtkfix' to

    fix this after the error has happened (i.e. after configure

    has produced the setup.h and makefiles):

    % make -f $CONFIGTOOLDIR/Makefile WXDIR=$WXDIR ECOSDIR=$ECOSDIR LEVEL=release wxgtkfix

    or

    % make -f $CONFIGTOOLDIR/Makefile WXDIR=$WXDIR ECOSDIR=$ECOSDIR LEVEL=debug wxgtkfix

    Now use the 'wx ecc ct' targets (not 'full') to continue

    building.

Building the Configuration Tool under Linux

===========================================

This build system is subject to change.

You will need:

  o gcc 2.95.2 or later

  o GTK+ and glib 1.2.6 or above. Please remove any 1.3 development RPMs

    from your setup, using for example:

    rpm -e gtk+-gtkbeta-devel-1.3.1b-2

    You can get GTK+ and glib for Red Hat 6.2 and above from:

    ftp://ftp.gtk.org/pub/gtk/v1.2/binary/RPMS/RedHat-6.2/RPMS/i386/gtk+-1.2.8-1.i386.rpm

    ftp://ftp.gtk.org/pub/gtk/v1.2/binary/RPMS/RedHat-6.2/RPMS/i386/glib-1.2.8-1.i386.rpm

  o a suitable version of wxWindows for GTK+, available from

    from ftp://sources.redhat.com/pub/ecos/ct2/.

    Unarchive the file wxGTK-x.y.z.tgz into a suitable directory, e.g.

    % mkdir /home/julians/wxWindows

    % cd /home/julians/wxWindows

    % tar xvfz /tmp/wxGTK-x.y.z.tgz

    You may also wish to download and unarchive wxWindows

    documentation, which is supplied in zip form. Unarchive

    using e.g.:

    % cd /home/julians/wxWindows

    % unzip -a wxWindows-x.y.z-HTML.zip

  o an eCos source hierarchy. See http://sources.redhat.com/ecos/anoncvs.html

    for how to download this from the CVS repository. For example:

    cvs -d :pserver:anoncvs@sources.redhat.com:/cvs/ecos co ecos/host

  o other tools:

    - Tcl/Tk 8.2 or above. See http://www.tcl.tk/

Summary:

  There is no 'configure' step for the eCos Configuration Tool

  as a whole, although the host tool libraries and wxWindows

  have configure scripts which are invoked by the makefile.

  You work in a build directory of your choosing, and the

  makefile will create the following directories underneath it:

  ct-build-debug/               ; Configtool debug build

  ecc-build-debug/              ; eCos libraries debug build

  wxwin-build-debug/            ; wxWindows debug build

  ct-build-release/             ; Configtool release build

  ecc-build-release/            ; eCos libraries release build

  wxwin-build-release/          ; wxWindows release build

  You need to pass the wxWindows source directory (WXDIR) and

  eCos hierarchy directory (ECOSDIR) to the makefile, along with

  the build LEVEL (debug or release). Please see makect.sh in

  the source directory, which is a useful helper script for

  making it easier to invoke the makefile.

  You also supply a target to build, such as full (everything),

  ct (just the Configuration Tool), wx (wxWindows only) or ecc

  (eCos libraries only). It is important to supply the target as

  the _last_ command(s) on the command line.

  The makefile builds and uses wxWindows as a static library,

  which minimizes problems with shared libraries and still

  results in a reasonable size of executable (4.5 MB

  uncompressed, or under 2 MB when compressed with UPX).

  Switching off unnecessary wxWindows features may result in

  smaller executables.

  IMPORTANT NOTE: currently, there are inadequate dependencies

  in the makefiles, so please make sure you start with a clean

  directory before building (use the cleanct target if

  necessary).

Examples:

  1. This builds the eCos libraries, wxWindows, and the Configuration Tool,

     in debug mode.

     % export ECOSDIR=/home/julians/cvs/eCos # The dir above 'host'

     % export CONFIGTOOLDIR=$ECOSDIR/host/tools/configtool/standalone/wxwin

     % export WXDIR=/home/julians/wxWindows

     %

     % mkdir /tmp/ecos-build

     % cd /tmp/ecos-build

     % make -f $CONFIGTOOLDIR/Makefile WXDIR=$WXDIR ECOSDIR=$ECOSDIR LEVEL=debug full

  2. This builds just the Configuration Tool, say after a file was edited,

     in release mode.

     % export ECOSDIR=/home/julians/cvs/eCos

     % export CONFIGTOOLDIR=$ECOSDIR/host/tools/configtool/standalone/wxwin

     % export WXDIR=/home/julians/wxWindows

     %

     % cd /tmp/ecos-build

     % make -f $CONFIGTOOLDIR/Makefile WXDIR=$WXDIR ECOSDIR=$ECOSDIR LEVEL=release ct

  *** Troubleshooting

  Please see the FAQ for what to do if the wxWindows file

  dcclient.cpp fails to compile.

  For more recent versions of wxWindows, you have to pass --static to wx-config.

  If you get a lot of GTK+-related link errors, check the beginning of the makefile

  and make sure WXCONFIGFLAGS=--static.

Building the Configuration Tool under Windows

=============================================

You will need:

  o Microsoft Visual C++ 6.0 or later

  o a suitable version of wxWindows for MS Windows, available

    from ftp://sources.redhat.com/pub/ecos/ct2/. To install the

    sources in 'setup' form, just run the executable and follow

    the instructions. If you have downloaded the sources in zip

    format, you will need to unarchive the file wxMSW-x.y.z.zip

    into a suitable directory, e.g.

    > mkdir c:\wxWindows

    > c:

    > cd \wxWindows

    > unzip c:\temp\wxMSW-x.y.z.zip

    Alternatively, you can use WinZip or similar utility to

    unarchive the files.

    Documentation in Windows HTML Help format is supplied in

    the setup or zipped distribution and does not have to be

    downloaded separately.

  o an eCos source hierarchy. See http://sources.redhat.com/ecos/anoncvs.html

    for how to download this from the CVS repository. For example:

    cvs -d :pserver:anoncvs@sources.redhat.com:/cvs/ecos co ecos/host

  o other tools:

    - Cygwin (sometimes called GNUPro). See http://sources.redhat.com/cygwin/

    - Tcl/Tk 8.2 or above. See http://www.tcl.tk/

Summary:

  There are two main steps: building wxWindows, and building the Configuration Tool.

  The Configuration Tool project file also builds the required eCos libraries.

  Note that unlike compilation under Linux, the wxWindows objects and libraries end up in

  the wxWindows source tree.

  Before routinely building the Configuration Tool, you will need to set up

  Visual C++ with the correct paths (see below).

Steps:

  1. Execute in a DOS box:

     subst v: d:\tmp

     where d:\tmp is a suitable temporary directory where the Configuration Tool

     binaries and objects will end up.

  2. Set the TCLHOME environment variable to where Tcl is installed. On Windows 9x,

     edit autoexec.bat. On Windows NT or W2K, use the System control panel applet.

  3. Build wxWindows. To do this, run VC++ and open src/msvc.dsw in the wxWindows

     project hierarchy. Select Build | Batch Build and check

     wxvc - WIN32 Debug and wxvc - WIN32 Release. Click on Build.

  4. Open the eCos/ecc/host/tools/configtool/standalone/wxwin/ConfigtoolVC.dsw

     workspace. Choose Tools | Options and click on the Directories tab.

     Select Show directories for: Include files.

     You need to add paths such as these:

     c:\Program Files\Tcl\include

     d:\wxWindows-010212\include

     Select Show directories for: Library files. Add these paths, changing

     as necessary:

     c:\Program Files\Tcl\lib

     d:\wxWindows-010212\lib

  5. Click on Select Active Configuration... and select the one you wish to

     build, such as WIN32 Ansi Debug (note that Unicode configurations are

     not yet available). Choose Build | Rebuild All to build the project.

     The configtool.exe executable should end up in v:\Configtool\AnsiDebug.

When compiled, configtool.exe depends on the following DLLs found

in your system32 directory that should be supplied with the executable:

  TCL82.DLL (or other name if you used a different version of TCL)

  MSVCIRT.DLL

  MSVCP60.DLL

  MSVCRT.DLL