Subversion Repositories openrisc

# ====================================================================

#

#      sh_se77x9_eth_drivers.cdl

#

#      Ethernet drivers - support for NS DP83902A ethernet controller

#      on the Hitachi SE77X9 board.

#

# ====================================================================

## ####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later

## version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT

## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License

## along with eCos; if not, write to the Free Software Foundation, Inc.,

## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.

##

## As a special exception, if other files instantiate templates or use

## macros or inline functions from this file, or you compile this file

## and link it with other works to produce a work based on this file,

## this file does not by itself cause the resulting work to be covered by

## the GNU General Public License. However the source code for this file

## must still be made available in accordance with section (3) of the GNU

## General Public License v2.

##

## This exception does not invalidate any other reasons why a work based

## on this file might be covered by the GNU General Public License.

## -------------------------------------------

## ####ECOSGPLCOPYRIGHTEND####

# ====================================================================

######DESCRIPTIONBEGIN####

#

# Author(s):      jskov

# Contributors:   jskov

# Date:           2001-06-13

#

#####DESCRIPTIONEND####

#

# ====================================================================

cdl_package CYGPKG_DEVS_ETH_SH_SE77X9 {

    display       "SH SE77X9 board ethernet driver"

    description   "Ethernet driver for SH SE77X9 board."

    parent        CYGPKG_IO_ETH_DRIVERS

    active_if     CYGPKG_IO_ETH_DRIVERS

    active_if     CYGPKG_HAL_SH_SH77X9_SE77X9

    include_dir   cyg/io

    # FIXME: This really belongs in the NS DP83902A package

    cdl_interface CYGINT_DEVS_ETH_NS_DP83902A_REQUIRED {

        display   "NS DP83902A ethernet driver required"

    }

    define_proc {

        puts $::cdl_system_header "/***** ethernet driver proc output start *****/"

        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_NS_DP83902A_INL "

        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_NS_DP83902A_CFG "

        puts $::cdl_system_header "/*****  ethernet driver proc output end  *****/"

    }

    cdl_component CYGPKG_DEVS_ETH_SH_SE77X9_ETH0 {

        display       "SE77X9 ethernet port driver"

        flavor        bool

        default_value 1

        description   "

            This option includes the ethernet device driver for the

            SE77X9 port."

        implements CYGINT_DEVS_ETH_NS_DP83902A_REQUIRED

        cdl_option CYGDAT_DEVS_ETH_SH_SE77X9_ETH0_NAME {

            display       "Device name for the ETH0 ethernet driver"

            flavor        data

            default_value {"\"eth0\""}

            description   "

                This option sets the name of the ethernet device."

        }

        cdl_component CYGSEM_DEVS_ETH_SH_SE77X9_ETH0_SET_ESA {

            display       "Set the ethernet station address"

            flavor        bool

            calculated    1

            description   "Enabling this option will allow the ethernet

            station address to be forced to the value set by the

            configuration.  This may be required if the hardware does

            not include a serial EEPROM for the ESA."

            cdl_option CYGDAT_DEVS_ETH_SH_SE77X9_ETH0_ESA {

                display       "The ethernet station address"

                flavor        data

                default_value {"{0x08, 0x88, 0x12, 0x34, 0x56, 0x78}"}

                description   "The ethernet station address"

            }

        }

    }

}