OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [common/] [current/] [include/] [hal_spd.h] - Blame information for rev 786

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 786 skrzyp
#ifndef CYGONCE_HAL_HAL_SPD_H
2
#define CYGONCE_HAL_HAL_SPD_H
3
 
4
//=============================================================================
5
//
6
//      hal_spd.h
7
//
8
//      HAL header for SDRAM Serial Presence Detect support.
9
//
10
//=============================================================================
11
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
12
// -------------------------------------------                              
13
// This file is part of eCos, the Embedded Configurable Operating System.   
14
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
15
//
16
// eCos is free software; you can redistribute it and/or modify it under    
17
// the terms of the GNU General Public License as published by the Free     
18
// Software Foundation; either version 2 or (at your option) any later      
19
// version.                                                                 
20
//
21
// eCos is distributed in the hope that it will be useful, but WITHOUT      
22
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
23
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
24
// for more details.                                                        
25
//
26
// You should have received a copy of the GNU General Public License        
27
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
28
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
29
//
30
// As a special exception, if other files instantiate templates or use      
31
// macros or inline functions from this file, or you compile this file      
32
// and link it with other works to produce a work based on this file,       
33
// this file does not by itself cause the resulting work to be covered by   
34
// the GNU General Public License. However the source code for this file    
35
// must still be made available in accordance with section (3) of the GNU   
36
// General Public License v2.                                               
37
//
38
// This exception does not invalidate any other reasons why a work based    
39
// on this file might be covered by the GNU General Public License.         
40
// -------------------------------------------                              
41
// ####ECOSGPLCOPYRIGHTEND####                                              
42
//=============================================================================
43
//#####DESCRIPTIONBEGIN####
44
//
45
// Author(s):   msalter
46
// Contributors:msalter
47
// Date:        2002-01-17
48
// Purpose:     Generic HAL SPD header.
49
// Usage:       #include <cyg/hal/hal_spd.h>
50
// Description: This header provides byte numbers and bit definitions for
51
//              serial EEPROM containing SDRAM module information.
52
//                           
53
//####DESCRIPTIONEND####
54
//
55
//=============================================================================
56
 
57
// Commonly used bytes
58
#define SPD_BANKCNT         5   // number of module banks
59
#define SPD_CONFIG         11   // DIMM configuration type (Parity or not, EEC)
60
#define SPD_REFRESH        12   // Referesh rate
61
#define SPD_SDRAM_WIDTH    13   // DRAM width
62
#define SPD_MOD_ATTRIB     21   // DRAM module attribute
63
#define SPD_BANKSZ         31   // module bank density
64
#define SPD_CHECKSUM       63   // checksum for bytes 0-62
65
 
66
// SPD_MOD_ATTRIB bits
67
#define SPD_ATTRIB_BUF_CTL 0x01 // Buffered Addr/Control inputs
68
#define SPD_ATTRIB_REG_CTL 0x02 // Registered Addr/Control inputs
69
#define SPD_ATTRIB_PLL     0x04 // On-card PLL
70
#define SPD_ATTRIB_BUF_DQ  0x08 // Buffered DQMB inputs
71
#define SPD_ATTRIB_REG_DQ  0x10 // Registered DQMB inputs
72
#define SPD_ATTRIB_DIFF    0x20 // Differential clock input
73
#define SPD_ATTRIB_RRA     0x40 // Redundant Row Address
74
 
75
//-----------------------------------------------------------------------------
76
#endif // CYGONCE_HAL_HAL_SPD_H
77
// End of hal_spd.h

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.