| 1 |
577 |
jeremybenn |
/*----------------------------------------------------------------------------
|
| 2 |
|
|
* LPC2378 Ethernet Definitions
|
| 3 |
|
|
*----------------------------------------------------------------------------
|
| 4 |
|
|
* Name: EMAC.H
|
| 5 |
|
|
* Purpose: Philips LPC2378 EMAC hardware definitions
|
| 6 |
|
|
*----------------------------------------------------------------------------
|
| 7 |
|
|
* Copyright (c) 2006 KEIL - An ARM Company. All rights reserved.
|
| 8 |
|
|
*---------------------------------------------------------------------------*/
|
| 9 |
|
|
#ifndef __EMAC_H
|
| 10 |
|
|
#define __EMAC_H
|
| 11 |
|
|
|
| 12 |
|
|
/* MAC address definition. The MAC address must be unique on the network. */
|
| 13 |
|
|
#define emacETHADDR0 0
|
| 14 |
|
|
#define emacETHADDR1 0xbd
|
| 15 |
|
|
#define emacETHADDR2 0x33
|
| 16 |
|
|
#define emacETHADDR3 0x02
|
| 17 |
|
|
#define emacETHADDR4 0x64
|
| 18 |
|
|
#define emacETHADDR5 0x24
|
| 19 |
|
|
|
| 20 |
|
|
|
| 21 |
|
|
/* EMAC Memory Buffer configuration for 16K Ethernet RAM. */
|
| 22 |
|
|
#define NUM_RX_FRAG 4 /* Num.of RX Fragments 4*1536= 6.0kB */
|
| 23 |
|
|
#define NUM_TX_FRAG 2 /* Num.of TX Fragments 2*1536= 3.0kB */
|
| 24 |
|
|
#define ETH_FRAG_SIZE 1536 /* Packet Fragment size 1536 Bytes */
|
| 25 |
|
|
|
| 26 |
|
|
#define ETH_MAX_FLEN 1536 /* Max. Ethernet Frame Size */
|
| 27 |
|
|
|
| 28 |
|
|
/* EMAC variables located in 16K Ethernet SRAM */
|
| 29 |
|
|
#define RX_DESC_BASE 0x7FE00000
|
| 30 |
|
|
#define RX_STAT_BASE (RX_DESC_BASE + NUM_RX_FRAG*8)
|
| 31 |
|
|
#define TX_DESC_BASE (RX_STAT_BASE + NUM_RX_FRAG*8)
|
| 32 |
|
|
#define TX_STAT_BASE (TX_DESC_BASE + NUM_TX_FRAG*8)
|
| 33 |
|
|
#define RX_BUF_BASE (TX_STAT_BASE + NUM_TX_FRAG*4)
|
| 34 |
|
|
#define TX_BUF_BASE (RX_BUF_BASE + NUM_RX_FRAG*ETH_FRAG_SIZE)
|
| 35 |
|
|
|
| 36 |
|
|
/* RX and TX descriptor and status definitions. */
|
| 37 |
|
|
#define RX_DESC_PACKET(i) (*(unsigned int *)(RX_DESC_BASE + 8*i))
|
| 38 |
|
|
#define RX_DESC_CTRL(i) (*(unsigned int *)(RX_DESC_BASE+4 + 8*i))
|
| 39 |
|
|
#define RX_STAT_INFO(i) (*(unsigned int *)(RX_STAT_BASE + 8*i))
|
| 40 |
|
|
#define RX_STAT_HASHCRC(i) (*(unsigned int *)(RX_STAT_BASE+4 + 8*i))
|
| 41 |
|
|
#define TX_DESC_PACKET(i) (*(unsigned int *)(TX_DESC_BASE + 8*i))
|
| 42 |
|
|
#define TX_DESC_CTRL(i) (*(unsigned int *)(TX_DESC_BASE+4 + 8*i))
|
| 43 |
|
|
#define TX_STAT_INFO(i) (*(unsigned int *)(TX_STAT_BASE + 4*i))
|
| 44 |
|
|
#define RX_BUF(i) (RX_BUF_BASE + ETH_FRAG_SIZE*i)
|
| 45 |
|
|
#define TX_BUF(i) (TX_BUF_BASE + ETH_FRAG_SIZE*i)
|
| 46 |
|
|
|
| 47 |
|
|
/* MAC Configuration Register 1 */
|
| 48 |
|
|
#define MAC1_REC_EN 0x00000001 /* Receive Enable */
|
| 49 |
|
|
#define MAC1_PASS_ALL 0x00000002 /* Pass All Receive Frames */
|
| 50 |
|
|
#define MAC1_RX_FLOWC 0x00000004 /* RX Flow Control */
|
| 51 |
|
|
#define MAC1_TX_FLOWC 0x00000008 /* TX Flow Control */
|
| 52 |
|
|
#define MAC1_LOOPB 0x00000010 /* Loop Back Mode */
|
| 53 |
|
|
#define MAC1_RES_TX 0x00000100 /* Reset TX Logic */
|
| 54 |
|
|
#define MAC1_RES_MCS_TX 0x00000200 /* Reset MAC TX Control Sublayer */
|
| 55 |
|
|
#define MAC1_RES_RX 0x00000400 /* Reset RX Logic */
|
| 56 |
|
|
#define MAC1_RES_MCS_RX 0x00000800 /* Reset MAC RX Control Sublayer */
|
| 57 |
|
|
#define MAC1_SIM_RES 0x00004000 /* Simulation Reset */
|
| 58 |
|
|
#define MAC1_SOFT_RES 0x00008000 /* Soft Reset MAC */
|
| 59 |
|
|
|
| 60 |
|
|
/* MAC Configuration Register 2 */
|
| 61 |
|
|
#define MAC2_FULL_DUP 0x00000001 /* Full Duplex Mode */
|
| 62 |
|
|
#define MAC2_FRM_LEN_CHK 0x00000002 /* Frame Length Checking */
|
| 63 |
|
|
#define MAC2_HUGE_FRM_EN 0x00000004 /* Huge Frame Enable */
|
| 64 |
|
|
#define MAC2_DLY_CRC 0x00000008 /* Delayed CRC Mode */
|
| 65 |
|
|
#define MAC2_CRC_EN 0x00000010 /* Append CRC to every Frame */
|
| 66 |
|
|
#define MAC2_PAD_EN 0x00000020 /* Pad all Short Frames */
|
| 67 |
|
|
#define MAC2_VLAN_PAD_EN 0x00000040 /* VLAN Pad Enable */
|
| 68 |
|
|
#define MAC2_ADET_PAD_EN 0x00000080 /* Auto Detect Pad Enable */
|
| 69 |
|
|
#define MAC2_PPREAM_ENF 0x00000100 /* Pure Preamble Enforcement */
|
| 70 |
|
|
#define MAC2_LPREAM_ENF 0x00000200 /* Long Preamble Enforcement */
|
| 71 |
|
|
#undef MAC2_NO_BACKOFF /* Remove compiler warning. */
|
| 72 |
|
|
#define MAC2_NO_BACKOFF 0x00001000 /* No Backoff Algorithm */
|
| 73 |
|
|
#define MAC2_BACK_PRESSURE 0x00002000 /* Backoff Presurre / No Backoff */
|
| 74 |
|
|
#define MAC2_EXCESS_DEF 0x00004000 /* Excess Defer */
|
| 75 |
|
|
|
| 76 |
|
|
/* Back-to-Back Inter-Packet-Gap Register */
|
| 77 |
|
|
#define IPGT_FULL_DUP 0x00000015 /* Recommended value for Full Duplex */
|
| 78 |
|
|
#define IPGT_HALF_DUP 0x00000012 /* Recommended value for Half Duplex */
|
| 79 |
|
|
|
| 80 |
|
|
/* Non Back-to-Back Inter-Packet-Gap Register */
|
| 81 |
|
|
#define IPGR_DEF 0x00000012 /* Recommended value */
|
| 82 |
|
|
|
| 83 |
|
|
/* Collision Window/Retry Register */
|
| 84 |
|
|
#define CLRT_DEF 0x0000370F /* Default value */
|
| 85 |
|
|
|
| 86 |
|
|
/* PHY Support Register */
|
| 87 |
|
|
#undef SUPP_SPEED /* Remove compiler warning. */
|
| 88 |
|
|
#define SUPP_SPEED 0x00000100 /* Reduced MII Logic Current Speed */
|
| 89 |
|
|
#define SUPP_RES_RMII 0x00000800 /* Reset Reduced MII Logic */
|
| 90 |
|
|
|
| 91 |
|
|
/* Test Register */
|
| 92 |
|
|
#define TEST_SHCUT_PQUANTA 0x00000001 /* Shortcut Pause Quanta */
|
| 93 |
|
|
#define TEST_TST_PAUSE 0x00000002 /* Test Pause */
|
| 94 |
|
|
#define TEST_TST_BACKP 0x00000004 /* Test Back Pressure */
|
| 95 |
|
|
|
| 96 |
|
|
/* MII Management Configuration Register */
|
| 97 |
|
|
#define MCFG_SCAN_INC 0x00000001 /* Scan Increment PHY Address */
|
| 98 |
|
|
#define MCFG_SUPP_PREAM 0x00000002 /* Suppress Preamble */
|
| 99 |
|
|
#define MCFG_CLK_SEL 0x0000001C /* Clock Select Mask */
|
| 100 |
|
|
#define MCFG_RES_MII 0x00008000 /* Reset MII Management Hardware */
|
| 101 |
|
|
|
| 102 |
|
|
/* MII Management Command Register */
|
| 103 |
|
|
#undef MCMD_READ /* Remove compiler warning. */
|
| 104 |
|
|
#define MCMD_READ 0x00000001 /* MII Read */
|
| 105 |
|
|
#undef MCMD_SCAN /* Remove compiler warning. */
|
| 106 |
|
|
#define MCMD_SCAN 0x00000002 /* MII Scan continuously */
|
| 107 |
|
|
|
| 108 |
|
|
#define MII_WR_TOUT 0x00050000 /* MII Write timeout count */
|
| 109 |
|
|
#define MII_RD_TOUT 0x00050000 /* MII Read timeout count */
|
| 110 |
|
|
|
| 111 |
|
|
/* MII Management Address Register */
|
| 112 |
|
|
#define MADR_REG_ADR 0x0000001F /* MII Register Address Mask */
|
| 113 |
|
|
#define MADR_PHY_ADR 0x00001F00 /* PHY Address Mask */
|
| 114 |
|
|
|
| 115 |
|
|
/* MII Management Indicators Register */
|
| 116 |
|
|
#undef MIND_BUSY /* Remove compiler warning. */
|
| 117 |
|
|
#define MIND_BUSY 0x00000001 /* MII is Busy */
|
| 118 |
|
|
#define MIND_SCAN 0x00000002 /* MII Scanning in Progress */
|
| 119 |
|
|
#define MIND_NOT_VAL 0x00000004 /* MII Read Data not valid */
|
| 120 |
|
|
#define MIND_MII_LINK_FAIL 0x00000008 /* MII Link Failed */
|
| 121 |
|
|
|
| 122 |
|
|
/* Command Register */
|
| 123 |
|
|
#define CR_RX_EN 0x00000001 /* Enable Receive */
|
| 124 |
|
|
#define CR_TX_EN 0x00000002 /* Enable Transmit */
|
| 125 |
|
|
#define CR_REG_RES 0x00000008 /* Reset Host Registers */
|
| 126 |
|
|
#define CR_TX_RES 0x00000010 /* Reset Transmit Datapath */
|
| 127 |
|
|
#define CR_RX_RES 0x00000020 /* Reset Receive Datapath */
|
| 128 |
|
|
#define CR_PASS_RUNT_FRM 0x00000040 /* Pass Runt Frames */
|
| 129 |
|
|
#define CR_PASS_RX_FILT 0x00000080 /* Pass RX Filter */
|
| 130 |
|
|
#define CR_TX_FLOW_CTRL 0x00000100 /* TX Flow Control */
|
| 131 |
|
|
#define CR_RMII 0x00000200 /* Reduced MII Interface */
|
| 132 |
|
|
#define CR_FULL_DUP 0x00000400 /* Full Duplex */
|
| 133 |
|
|
|
| 134 |
|
|
/* Status Register */
|
| 135 |
|
|
#define SR_RX_EN 0x00000001 /* Enable Receive */
|
| 136 |
|
|
#define SR_TX_EN 0x00000002 /* Enable Transmit */
|
| 137 |
|
|
|
| 138 |
|
|
/* Transmit Status Vector 0 Register */
|
| 139 |
|
|
#define TSV0_CRC_ERR 0x00000001 /* CRC error */
|
| 140 |
|
|
#define TSV0_LEN_CHKERR 0x00000002 /* Length Check Error */
|
| 141 |
|
|
#define TSV0_LEN_OUTRNG 0x00000004 /* Length Out of Range */
|
| 142 |
|
|
#define TSV0_DONE 0x00000008 /* Tramsmission Completed */
|
| 143 |
|
|
#define TSV0_MCAST 0x00000010 /* Multicast Destination */
|
| 144 |
|
|
#define TSV0_BCAST 0x00000020 /* Broadcast Destination */
|
| 145 |
|
|
#define TSV0_PKT_DEFER 0x00000040 /* Packet Deferred */
|
| 146 |
|
|
#define TSV0_EXC_DEFER 0x00000080 /* Excessive Packet Deferral */
|
| 147 |
|
|
#define TSV0_EXC_COLL 0x00000100 /* Excessive Collision */
|
| 148 |
|
|
#define TSV0_LATE_COLL 0x00000200 /* Late Collision Occured */
|
| 149 |
|
|
#define TSV0_GIANT 0x00000400 /* Giant Frame */
|
| 150 |
|
|
#define TSV0_UNDERRUN 0x00000800 /* Buffer Underrun */
|
| 151 |
|
|
#define TSV0_BYTES 0x0FFFF000 /* Total Bytes Transferred */
|
| 152 |
|
|
#define TSV0_CTRL_FRAME 0x10000000 /* Control Frame */
|
| 153 |
|
|
#define TSV0_PAUSE 0x20000000 /* Pause Frame */
|
| 154 |
|
|
#define TSV0_BACK_PRESS 0x40000000 /* Backpressure Method Applied */
|
| 155 |
|
|
#define TSV0_VLAN 0x80000000 /* VLAN Frame */
|
| 156 |
|
|
|
| 157 |
|
|
/* Transmit Status Vector 1 Register */
|
| 158 |
|
|
#define TSV1_BYTE_CNT 0x0000FFFF /* Transmit Byte Count */
|
| 159 |
|
|
#define TSV1_COLL_CNT 0x000F0000 /* Transmit Collision Count */
|
| 160 |
|
|
|
| 161 |
|
|
/* Receive Status Vector Register */
|
| 162 |
|
|
#define RSV_BYTE_CNT 0x0000FFFF /* Receive Byte Count */
|
| 163 |
|
|
#define RSV_PKT_IGNORED 0x00010000 /* Packet Previously Ignored */
|
| 164 |
|
|
#define RSV_RXDV_SEEN 0x00020000 /* RXDV Event Previously Seen */
|
| 165 |
|
|
#define RSV_CARR_SEEN 0x00040000 /* Carrier Event Previously Seen */
|
| 166 |
|
|
#define RSV_REC_CODEV 0x00080000 /* Receive Code Violation */
|
| 167 |
|
|
#define RSV_CRC_ERR 0x00100000 /* CRC Error */
|
| 168 |
|
|
#define RSV_LEN_CHKERR 0x00200000 /* Length Check Error */
|
| 169 |
|
|
#define RSV_LEN_OUTRNG 0x00400000 /* Length Out of Range */
|
| 170 |
|
|
#define RSV_REC_OK 0x00800000 /* Frame Received OK */
|
| 171 |
|
|
#define RSV_MCAST 0x01000000 /* Multicast Frame */
|
| 172 |
|
|
#define RSV_BCAST 0x02000000 /* Broadcast Frame */
|
| 173 |
|
|
#define RSV_DRIB_NIBB 0x04000000 /* Dribble Nibble */
|
| 174 |
|
|
#define RSV_CTRL_FRAME 0x08000000 /* Control Frame */
|
| 175 |
|
|
#define RSV_PAUSE 0x10000000 /* Pause Frame */
|
| 176 |
|
|
#define RSV_UNSUPP_OPC 0x20000000 /* Unsupported Opcode */
|
| 177 |
|
|
#define RSV_VLAN 0x40000000 /* VLAN Frame */
|
| 178 |
|
|
|
| 179 |
|
|
/* Flow Control Counter Register */
|
| 180 |
|
|
#define FCC_MIRR_CNT 0x0000FFFF /* Mirror Counter */
|
| 181 |
|
|
#define FCC_PAUSE_TIM 0xFFFF0000 /* Pause Timer */
|
| 182 |
|
|
|
| 183 |
|
|
/* Flow Control Status Register */
|
| 184 |
|
|
#define FCS_MIRR_CNT 0x0000FFFF /* Mirror Counter Current */
|
| 185 |
|
|
|
| 186 |
|
|
/* Receive Filter Control Register */
|
| 187 |
|
|
#define RFC_UCAST_EN 0x00000001 /* Accept Unicast Frames Enable */
|
| 188 |
|
|
#define RFC_BCAST_EN 0x00000002 /* Accept Broadcast Frames Enable */
|
| 189 |
|
|
#define RFC_MCAST_EN 0x00000004 /* Accept Multicast Frames Enable */
|
| 190 |
|
|
#define RFC_UCAST_HASH_EN 0x00000008 /* Accept Unicast Hash Filter Frames */
|
| 191 |
|
|
#define RFC_MCAST_HASH_EN 0x00000010 /* Accept Multicast Hash Filter Fram.*/
|
| 192 |
|
|
#define RFC_PERFECT_EN 0x00000020 /* Accept Perfect Match Enable */
|
| 193 |
|
|
#define RFC_MAGP_WOL_EN 0x00001000 /* Magic Packet Filter WoL Enable */
|
| 194 |
|
|
#define RFC_PFILT_WOL_EN 0x00002000 /* Perfect Filter WoL Enable */
|
| 195 |
|
|
|
| 196 |
|
|
/* Receive Filter WoL Status/Clear Registers */
|
| 197 |
|
|
#define WOL_UCAST 0x00000001 /* Unicast Frame caused WoL */
|
| 198 |
|
|
#define WOL_BCAST 0x00000002 /* Broadcast Frame caused WoL */
|
| 199 |
|
|
#define WOL_MCAST 0x00000004 /* Multicast Frame caused WoL */
|
| 200 |
|
|
#define WOL_UCAST_HASH 0x00000008 /* Unicast Hash Filter Frame WoL */
|
| 201 |
|
|
#define WOL_MCAST_HASH 0x00000010 /* Multicast Hash Filter Frame WoL */
|
| 202 |
|
|
#define WOL_PERFECT 0x00000020 /* Perfect Filter WoL */
|
| 203 |
|
|
#define WOL_RX_FILTER 0x00000080 /* RX Filter caused WoL */
|
| 204 |
|
|
#define WOL_MAG_PACKET 0x00000100 /* Magic Packet Filter caused WoL */
|
| 205 |
|
|
|
| 206 |
|
|
/* Interrupt Status/Enable/Clear/Set Registers */
|
| 207 |
|
|
#define INT_RX_OVERRUN 0x00000001 /* Overrun Error in RX Queue */
|
| 208 |
|
|
#define INT_RX_ERR 0x00000002 /* Receive Error */
|
| 209 |
|
|
#define INT_RX_FIN 0x00000004 /* RX Finished Process Descriptors */
|
| 210 |
|
|
#define INT_RX_DONE 0x00000008 /* Receive Done */
|
| 211 |
|
|
#define INT_TX_UNDERRUN 0x00000010 /* Transmit Underrun */
|
| 212 |
|
|
#define INT_TX_ERR 0x00000020 /* Transmit Error */
|
| 213 |
|
|
#define INT_TX_FIN 0x00000040 /* TX Finished Process Descriptors */
|
| 214 |
|
|
#define INT_TX_DONE 0x00000080 /* Transmit Done */
|
| 215 |
|
|
#define INT_SOFT_INT 0x00001000 /* Software Triggered Interrupt */
|
| 216 |
|
|
#define INT_WAKEUP 0x00002000 /* Wakeup Event Interrupt */
|
| 217 |
|
|
|
| 218 |
|
|
/* Power Down Register */
|
| 219 |
|
|
#define PD_POWER_DOWN 0x80000000 /* Power Down MAC */
|
| 220 |
|
|
|
| 221 |
|
|
/* RX Descriptor Control Word */
|
| 222 |
|
|
#define RCTRL_SIZE 0x000007FF /* Buffer size mask */
|
| 223 |
|
|
#define RCTRL_INT 0x80000000 /* Generate RxDone Interrupt */
|
| 224 |
|
|
|
| 225 |
|
|
/* RX Status Hash CRC Word */
|
| 226 |
|
|
#define RHASH_SA 0x000001FF /* Hash CRC for Source Address */
|
| 227 |
|
|
#define RHASH_DA 0x001FF000 /* Hash CRC for Destination Address */
|
| 228 |
|
|
|
| 229 |
|
|
/* RX Status Information Word */
|
| 230 |
|
|
#define RINFO_SIZE 0x000007FF /* Data size in bytes */
|
| 231 |
|
|
#define RINFO_CTRL_FRAME 0x00040000 /* Control Frame */
|
| 232 |
|
|
#define RINFO_VLAN 0x00080000 /* VLAN Frame */
|
| 233 |
|
|
#define RINFO_FAIL_FILT 0x00100000 /* RX Filter Failed */
|
| 234 |
|
|
#define RINFO_MCAST 0x00200000 /* Multicast Frame */
|
| 235 |
|
|
#define RINFO_BCAST 0x00400000 /* Broadcast Frame */
|
| 236 |
|
|
#define RINFO_CRC_ERR 0x00800000 /* CRC Error in Frame */
|
| 237 |
|
|
#define RINFO_SYM_ERR 0x01000000 /* Symbol Error from PHY */
|
| 238 |
|
|
#define RINFO_LEN_ERR 0x02000000 /* Length Error */
|
| 239 |
|
|
#define RINFO_RANGE_ERR 0x04000000 /* Range Error (exceeded max. size) */
|
| 240 |
|
|
#define RINFO_ALIGN_ERR 0x08000000 /* Alignment Error */
|
| 241 |
|
|
#define RINFO_OVERRUN 0x10000000 /* Receive overrun */
|
| 242 |
|
|
#define RINFO_NO_DESCR 0x20000000 /* No new Descriptor available */
|
| 243 |
|
|
#define RINFO_LAST_FLAG 0x40000000 /* Last Fragment in Frame */
|
| 244 |
|
|
#define RINFO_ERR 0x80000000 /* Error Occured (OR of all errors) */
|
| 245 |
|
|
|
| 246 |
|
|
#define RINFO_ERR_MASK (RINFO_FAIL_FILT | RINFO_CRC_ERR | RINFO_SYM_ERR | \
|
| 247 |
|
|
RINFO_LEN_ERR | RINFO_ALIGN_ERR | RINFO_OVERRUN)
|
| 248 |
|
|
|
| 249 |
|
|
/* TX Descriptor Control Word */
|
| 250 |
|
|
#define TCTRL_SIZE 0x000007FF /* Size of data buffer in bytes */
|
| 251 |
|
|
#define TCTRL_OVERRIDE 0x04000000 /* Override Default MAC Registers */
|
| 252 |
|
|
#define TCTRL_HUGE 0x08000000 /* Enable Huge Frame */
|
| 253 |
|
|
#define TCTRL_PAD 0x10000000 /* Pad short Frames to 64 bytes */
|
| 254 |
|
|
#define TCTRL_CRC 0x20000000 /* Append a hardware CRC to Frame */
|
| 255 |
|
|
#define TCTRL_LAST 0x40000000 /* Last Descriptor for TX Frame */
|
| 256 |
|
|
#define TCTRL_INT 0x80000000 /* Generate TxDone Interrupt */
|
| 257 |
|
|
|
| 258 |
|
|
/* TX Status Information Word */
|
| 259 |
|
|
#define TINFO_COL_CNT 0x01E00000 /* Collision Count */
|
| 260 |
|
|
#define TINFO_DEFER 0x02000000 /* Packet Deferred (not an error) */
|
| 261 |
|
|
#define TINFO_EXCESS_DEF 0x04000000 /* Excessive Deferral */
|
| 262 |
|
|
#define TINFO_EXCESS_COL 0x08000000 /* Excessive Collision */
|
| 263 |
|
|
#define TINFO_LATE_COL 0x10000000 /* Late Collision Occured */
|
| 264 |
|
|
#define TINFO_UNDERRUN 0x20000000 /* Transmit Underrun */
|
| 265 |
|
|
#define TINFO_NO_DESCR 0x40000000 /* No new Descriptor available */
|
| 266 |
|
|
#define TINFO_ERR 0x80000000 /* Error Occured (OR of all errors) */
|
| 267 |
|
|
|
| 268 |
|
|
/* DP83848C PHY Registers */
|
| 269 |
|
|
#define PHY_REG_BMCR 0x00 /* Basic Mode Control Register */
|
| 270 |
|
|
#define PHY_REG_BMSR 0x01 /* Basic Mode Status Register */
|
| 271 |
|
|
#define PHY_REG_IDR1 0x02 /* PHY Identifier 1 */
|
| 272 |
|
|
#define PHY_REG_IDR2 0x03 /* PHY Identifier 2 */
|
| 273 |
|
|
#define PHY_REG_ANAR 0x04 /* Auto-Negotiation Advertisement */
|
| 274 |
|
|
#define PHY_REG_ANLPAR 0x05 /* Auto-Neg. Link Partner Abitily */
|
| 275 |
|
|
#define PHY_REG_ANER 0x06 /* Auto-Neg. Expansion Register */
|
| 276 |
|
|
#define PHY_REG_ANNPTR 0x07 /* Auto-Neg. Next Page TX */
|
| 277 |
|
|
|
| 278 |
|
|
/* PHY Extended Registers */
|
| 279 |
|
|
#define PHY_REG_STS 0x10 /* Status Register */
|
| 280 |
|
|
#define PHY_REG_MICR 0x11 /* MII Interrupt Control Register */
|
| 281 |
|
|
#define PHY_REG_MISR 0x12 /* MII Interrupt Status Register */
|
| 282 |
|
|
#define PHY_REG_FCSCR 0x14 /* False Carrier Sense Counter */
|
| 283 |
|
|
#define PHY_REG_RECR 0x15 /* Receive Error Counter */
|
| 284 |
|
|
#define PHY_REG_PCSR 0x16 /* PCS Sublayer Config. and Status */
|
| 285 |
|
|
#define PHY_REG_RBR 0x17 /* RMII and Bypass Register */
|
| 286 |
|
|
#define PHY_REG_LEDCR 0x18 /* LED Direct Control Register */
|
| 287 |
|
|
#define PHY_REG_PHYCR 0x19 /* PHY Control Register */
|
| 288 |
|
|
#define PHY_REG_10BTSCR 0x1A /* 10Base-T Status/Control Register */
|
| 289 |
|
|
#define PHY_REG_CDCTRL1 0x1B /* CD Test Control and BIST Extens. */
|
| 290 |
|
|
#define PHY_REG_EDCR 0x1D /* Energy Detect Control Register */
|
| 291 |
|
|
|
| 292 |
|
|
#define PHY_FULLD_100M 0x2100 /* Full Duplex 100Mbit */
|
| 293 |
|
|
#define PHY_HALFD_100M 0x2000 /* Half Duplex 100Mbit */
|
| 294 |
|
|
#define PHY_FULLD_10M 0x0100 /* Full Duplex 10Mbit */
|
| 295 |
|
|
#define PHY_HALFD_10M 0x0000 /* Half Duplex 10MBit */
|
| 296 |
|
|
#define PHY_AUTO_NEG 0x3000 /* Select Auto Negotiation */
|
| 297 |
|
|
|
| 298 |
|
|
#define DP83848C_DEF_ADR 0x0100 /* Default PHY device address */
|
| 299 |
|
|
#define DP83848C_ID 0x20005C90 /* PHY Identifier */
|
| 300 |
|
|
|
| 301 |
|
|
// prototypes
|
| 302 |
|
|
portBASE_TYPE Init_EMAC(void);
|
| 303 |
|
|
unsigned short ReadFrameBE_EMAC(void);
|
| 304 |
|
|
void CopyToFrame_EMAC(void *Source, unsigned int Size);
|
| 305 |
|
|
void CopyFromFrame_EMAC(void *Dest, unsigned short Size);
|
| 306 |
|
|
void DummyReadFrame_EMAC(unsigned short Size);
|
| 307 |
|
|
unsigned short StartReadFrame(void);
|
| 308 |
|
|
void EndReadFrame(void);
|
| 309 |
|
|
unsigned int CheckFrameReceived(void);
|
| 310 |
|
|
void RequestSend(void);
|
| 311 |
|
|
unsigned int Rdy4Tx(void);
|
| 312 |
|
|
void DoSend_EMAC(unsigned short FrameSize);
|
| 313 |
|
|
void vEMACWaitForInput( void );
|
| 314 |
|
|
unsigned int uiGetEMACRxData( unsigned char *ucBuffer );
|
| 315 |
|
|
|
| 316 |
|
|
|
| 317 |
|
|
#endif
|
| 318 |
|
|
|
| 319 |
|
|
/*----------------------------------------------------------------------------
|
| 320 |
|
|
* end of file
|
| 321 |
|
|
*---------------------------------------------------------------------------*/
|
| 322 |
|
|
|
