URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ARM7_STR71x_IAR/] [71x_init.s] - Blame information for rev 615

Go to most recent revision | Details | Compare with Previous | View Log


;******************** (C) COPYRIGHT 2003 STMicroelectronics ********************
;* File Name          : 71x_init.s
;* Author             : MCD Application Team
;* Date First Issued  : 06/23/2004
;* Description        : This is the first code executed after RESET.
;*                      This code used to initialize system stacks
;*                      and critical peripherals before entering the C code.
;*******************************************************************************
;* History:
;*  13/01/2006 : V3.1
;*  24/05/2005 : V3.0
;*  30/11/2004 : V2.0
;*  14/07/2004 : V1.3
;*  01/01/2004 : V1.2
;*******************************************************************************
; THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
; CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
; OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
; OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
; CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
 
 
; --- Standard definitions of mode bits and interrupt (I & F) flags in PSRs
 
Mode_USR           EQU   0x10
Mode_FIQ           EQU   0x11
Mode_IRQ           EQU   0x12
Mode_SVC           EQU   0x13
Mode_ABT           EQU   0x17
Mode_UNDEF         EQU   0x1B
Mode_SYS           EQU   0x1F ; available on ARM Arch 4 and later
 
I_Bit              EQU   0x80 ; when I bit is set, IRQ is disabled
F_Bit              EQU   0x40 ; when F bit is set, FIQ is disabled
 
 
 
EIC_Base_addr      EQU   0xFFFFF800; EIC base address
ICR_off_addr       EQU   0x00      ; Interrupt Control register offset
CIPR_off_addr      EQU   0x08      ; Current Interrupt Priority Register offset
IVR_off_addr       EQU   0x18      ; Interrupt Vector Register offset
FIR_off_addr       EQU   0x1C      ; Fast Interrupt Register offset
IER_off_addr       EQU   0x20      ; Interrupt Enable Register offset
IPR_off_addr       EQU   0x40      ; Interrupt Pending Bit Register offset
SIR0_off_addr      EQU   0x60      ; Source Interrupt Register 0
 
EMI_Base_addr      EQU   0x6C000000; EMI base address
BCON0_off_addr     EQU   0x00      ; Bank 0 configuration register offset
BCON1_off_addr     EQU   0x04      ; Bank 1 configuration register offset
BCON2_off_addr     EQU   0x08      ; Bank 2 configuration register offset
BCON3_off_addr     EQU   0x0C      ; Bank 3 configuration register offset
 
EMI_ENABLE         EQU   0x8000
EMI_SIZE_16        EQU   0x0001
 
GPIO2_Base_addr    EQU   0xE0005000; GPIO2 base address
PC0_off_addr       EQU   0x00      ; Port Configuration Register 0 offset
PC1_off_addr       EQU   0x04      ; Port Configuration Register 1 offset
PC2_off_addr       EQU   0x08      ; Port Configuration Register 2 offset
PD_off_addr        EQU   0x0C      ; Port Data Register offset
 
CPM_Base_addr      EQU   0xA0000040; CPM Base Address
BOOTCR_off_addr    EQU   0x10      ; CPM - Boot Configuration Register
FLASH_mask         EQU   0x0000    ; to remap FLASH at 0x0
RAM_mask           EQU   0x0002    ; to remap RAM at 0x0
 
;|----------------------------------------------------------------------------------|
;| - APB Bridge  (System Peripheral)                                               |
;|----------------------------------------------------------------------------------|
APB1_base_addr     EQU   0xC0000000          ; APB Bridge1 Base Address
APB2_base_addr     EQU   0xE0000000          ; APB Bridge2 Base Address
CKDIS_off_addr     EQU   0x10                ; APB Bridge1 - Clock Disable  Register
SWRES_off_addr     EQU   0x14                ; APB Bridge1 - Software Reset Register
CKDIS1_config_all  EQU   0x27FB              ; To enable/disable clock of all APB1's peripherals
SWRES1_config_all  EQU   0x27FB              ; To reset all APB1's peripherals
CKDIS2_config_all  EQU   0x7FDD              ; To enable/disable clock of all APB2's peripherals
SWRES2_config_all  EQU   0x7FDD              ; To reset all APB2's peripherals
 
 
 
;---------------------------------------------------------------
; ?program_start
;---------------------------------------------------------------
                MODULE  ?program_start
                SECTION IRQ_STACK:DATA:NOROOT(3)
                SECTION FIQ_STACK:DATA:NOROOT(3)
                SECTION UND_STACK:DATA:NOROOT(3)
                SECTION ABT_STACK:DATA:NOROOT(3)
                SECTION SVC_STACK:DATA:NOROOT(3)
                SECTION CSTACK:DATA:NOROOT(3)
                SECTION .text:CODE(2)
                PUBLIC  __iar_program_start
                EXTERN  ?main
                EXTERN  ?main
                CODE32
 
 
;*******************************************************************************
;*******                         -- MACROS --                            *******
;*******************************************************************************
;*******************************************************************************
;* Macro Name     : EMI_INIT
;* Description    : This macro Initialize EMI bank 1: 16-bit 7 wait state
;* Input          : None.
;* Output         : None.
;*******************************************************************************
EMI_INIT  MACRO
        LDR     r0, =GPIO2_Base_addr      ; Configure P2.0 -> 3 in AF_PP mode
        LDR     r2, [r0, #PC0_off_addr]
        ORR     r2, r2,#0x0000000F
        STR     r2, [r0, #PC0_off_addr]
        LDR     r2, [r0, #PC1_off_addr]
        ORR     r2, r2,#0x0000000F
        STR     r2, [r0, #PC1_off_addr]
        LDR     r2, [r0, #PC2_off_addr]
        ORR     r2, r2,#0x0000000F
        STR     r2, [r0, #PC2_off_addr]
        LDR     r0, =EMI_Base_addr
        LDR     r1, =0x18|EMI_ENABLE|EMI_SIZE_16
        STR     r1, [r0, #BCON1_off_addr] ; Enable bank 1 16-bit 7 wait state
        ENDM
;*******************************************************************************
;* Macro Name     : EIC_INIT
;* Description    : This macro Initialize the EIC as following :
;                 - IRQ disabled
;                 - FIQ disabled
;                 - IVR contain the load PC opcode (0xE59FFXXX)
;                 - Current priority level equal to 0
;                 - All channels are disabled
;                 - All channels priority equal to 0
;                 - All SIR registers contain offset to the related IRQ
;                   table entry
;* Input          : None.
;* Output         : None.
;*******************************************************************************
EIC_INIT   MACRO
 
        LDR     r3, =EIC_Base_addr
        LDR     r4, =0xE59F0000
        STR     r4, [r3, #IVR_off_addr]; Write the LDR pc,[pc,#offset]
                                       ; instruction code in IVR[31:16]
        LDR     r2, =32                ; 32 Channel to initialize
        LDR     r0, =T0TIMI_Addr       ; Read the address of the IRQs
                                       ; address table
        LDR     r1, =0x00000FFF
        AND     r0,r0,r1
        LDR     r5, =SIR0_off_addr     ; Read SIR0 address
        SUB     r4,r0,#8               ; subtract 8 for prefetch
        LDR     r1, =0xF7E8            ; Add the offset from IVR to 0x00000000
                                       ; address(IVR address + 7E8 = 0x00000000)
                                       ; 0xF7E8 used to complete the
                                       ; LDR pc,[pc,#offset] opcode (0xE59FFXXX)
        ADD     r1,r4,r1               ; Compute the jump offset from IVR to the
                                       ; IRQ table entry.
EIC_INI MOV     r4, r1, LSL #16        ; Left shift the result
        STR     r4, [r3, r5]           ; Store the result in SIRx register
        ADD     r1, r1, #4             ; Next IRQ address
        ADD     r5, r5, #4             ; Next SIR
        SUBS    r2, r2, #1             ; Decrement the number of SIR registers
                                       ; to initialize
        BNE     EIC_INI                ; If more then continue
        ENDM
;*******************************************************************************
;* Macro Name     : PERIPHERAL_INIT
;* Description    : This macro reset all device peripherals.
;* Input          : None.
;* Output         : None.
;*******************************************************************************
PERIPHERAL_INIT MACRO
 
        LDR     r1, =APB1_base_addr      ; r0= APB1 base address
        LDR     r2, =APB2_base_addr      ; r0= APB2 base address
        LDR     r0, =CKDIS1_config_all
        STRH    r0, [r1, #CKDIS_off_addr]; Clock Disabling for all APB1 peripherals
        LDR     r0, =CKDIS2_config_all
        STRH    r0, [r2, #CKDIS_off_addr]; Clock Disabling for all APB2 peripherals
        LDR     r0, =SWRES1_config_all
        STRH    r0, [r1, #SWRES_off_addr]; Keep all APB1 peripherals under reset
        LDR     r0, =SWRES2_config_all
        STRH    r0, [r2, #SWRES_off_addr]; Keep all APB2 peripherals under reset
        MOV     r7, #10                  ; Wait that the selected macrocells exit from reset
loop1   SUBS    r7, r7, #1
        BNE     loop1
        MOV     r0, #0
        STRH    r0, [r1, #SWRES_off_addr]; Enable all all APB1 peripherals
        STRH    r0, [r2, #SWRES_off_addr]; Enable all all APB2 peripherals
        STRH    r0, [r1, #CKDIS_off_addr]; Clock Enabling for all APB1 peripherals
        STRH    r0, [r2, #CKDIS_off_addr]; Clock Enabling for all APB2 peripherals
        MOV     r7, #10                  ; Wait that the selected macrocells exit from reset
loop2   SUBS    r7, r7, #1
        BNE     loop2
        ENDM
;********************************************************************************************
 
; define remapping
; If you need to remap memory before entring the main program
; uncomment next ligne
;            #define   remapping
 
; Then define which memory to remap to address 0x00000000
;  Uncomment next line if you want to remap RAM
;         #define  remap_ram
 
;  Uncomment next line if you want to remap FLASH
;         #define remap_flash
 
 
        IMPORT  T0TIMI_Addr
__iar_program_start
         LDR     pc, =NextInst
NextInst
                NOP             ; Wait for OSC stabilization
                NOP
                NOP
                NOP
                NOP
                NOP
                NOP
                NOP
                NOP
 
        MSR     CPSR_c, #Mode_ABT|F_Bit|I_Bit
        ldr      sp,=SFE(ABT_STACK)     ; End of ABT_STACK
 
        MSR     CPSR_c, #Mode_UNDEF|F_Bit|I_Bit
        ldr      sp,=SFE(UND_STACK)     ; End of UNDEF_STACK
 
        MSR     CPSR_c, #Mode_SVC|F_Bit|I_Bit
       ldr      sp,=SFE(SVC_STACK)      ; End of SVC_STACK
 
 
 
; Uncomment next ligne if you need to reset all device pripherals
 ;      PERIPHERAL_INIT           ; Reset all device peripherals
 
; Uncomment next ligne if you need to enable the EMI Bank 1
   ;    EMI_INIT                  ; Initialize EIM Bank 1
 
;Uncomment next ligne if you need to initialize the EIC
        EIC_INIT                  ; Initialize EIC
 
;******************************************************************************
;REMAPPING
;Description  : Remapping  memory whether RAM,FLASH
;               at Address 0x0 after the application has started executing.
;               Remapping is generally done to allow RAM  to replace FLASH
;               at 0x0.
;               the remapping of RAM allow copying of vector table into RAM
;               To enable the memory remapping uncomment: (see above)
;               #define  remapping to enable memory remapping
;                  AND
;               #define  remap_ram to remap RAM
;                  OR
;               #define  remap_flash to remap FLASH
;******************************************************************************
#ifdef remapping
    #ifdef remap_flash
        MOV     r0, #FLASH_mask
    #endif
    #ifdef remap_ram
        MOV     r0, #RAM_mask
    #endif
 
        LDR     r1, =CPM_Base_addr
        LDRH    r2, [r1, #BOOTCR_off_addr]; Read BOOTCR Register
        BIC     r2, r2, #0x03             ; Reset the two LSB bits of BOOTCR
        ORR     r2, r2, r0                ; change the two LSB bits of BOOTCR
        STRH    r2, [r1, #BOOTCR_off_addr]; Write BOOTCR Register
#endif
 
        MSR     CPSR_c, #Mode_FIQ|I_Bit; Change to FIQ mode
        ldr      sp,=SFE(FIQ_STACK)      ; End of FIQ_STACK
 
        MSR     CPSR_c, #Mode_IRQ|I_Bit; Change to IRQ mode
        ldr      sp,=SFE(IRQ_STACK)    ; End of IRQ_STACK
 
        MSR     CPSR_c, #Mode_SYS         ; Change to system mode, Enable IRQ and FIQ
       ldr     sp,=SFE(CSTACK)        ; End of CSTACK(user)
 
 
 
; --- Now branches to a C lib function that copies RO data from their
;     load region to their execute region, create the RW and ZI regions
;     then jumps to user C main program.
 
                ; main() must be called from Supervisor mode
                MSR     CPSR_c, #Mode_SVC|F_Bit|I_Bit
 
        b ?main   ; Note : use B not BL, because an application will
                         ; never return this way
 
        LTORG
 
        END
;******************* (C) COPYRIGHT 2003 STMicroelectronics *****END OF FILE****

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ARM7_STR71x_IAR/] [71x_init.s] - Blame information for rev 615

Line No.	Rev	Author	Line
1	577	jeremybenn	`;****************** (C) COPYRIGHT 2003 STMicroelectronics ******************`
2			`;* File Name : 71x_init.s`
3			`;* Author : MCD Application Team`
4			`;* Date First Issued : 06/23/2004`
5			`;* Description : This is the first code executed after RESET.`
6			`;* This code used to initialize system stacks`
7			`;* and critical peripherals before entering the C code.`
8			`;*******************************************************************************`
9			`;* History:`
10			`;* 13/01/2006 : V3.1`
11			`;* 24/05/2005 : V3.0`
12			`;* 30/11/2004 : V2.0`
13			`;* 14/07/2004 : V1.3`
14			`;* 01/01/2004 : V1.2`
15			`;*******************************************************************************`
16			`; THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH`
17			`; CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.`
18			`; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT`
19			`; OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT`
20			`; OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION`
21			`; CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.`
22			`;*******************************************************************************/`
23
24
25			`; --- Standard definitions of mode bits and interrupt (I & F) flags in PSRs`
26
27			`Mode_USR EQU 0x10`
28			`Mode_FIQ EQU 0x11`
29			`Mode_IRQ EQU 0x12`
30			`Mode_SVC EQU 0x13`
31			`Mode_ABT EQU 0x17`
32			`Mode_UNDEF EQU 0x1B`
33			`Mode_SYS EQU 0x1F ; available on ARM Arch 4 and later`
34
35			`I_Bit EQU 0x80 ; when I bit is set, IRQ is disabled`
36			`F_Bit EQU 0x40 ; when F bit is set, FIQ is disabled`
37
38
39
40			`EIC_Base_addr EQU 0xFFFFF800; EIC base address`
41			`ICR_off_addr EQU 0x00 ; Interrupt Control register offset`
42			`CIPR_off_addr EQU 0x08 ; Current Interrupt Priority Register offset`
43			`IVR_off_addr EQU 0x18 ; Interrupt Vector Register offset`
44			`FIR_off_addr EQU 0x1C ; Fast Interrupt Register offset`
45			`IER_off_addr EQU 0x20 ; Interrupt Enable Register offset`
46			`IPR_off_addr EQU 0x40 ; Interrupt Pending Bit Register offset`
47			`SIR0_off_addr EQU 0x60 ; Source Interrupt Register 0`
48
49			`EMI_Base_addr EQU 0x6C000000; EMI base address`
50			`BCON0_off_addr EQU 0x00 ; Bank 0 configuration register offset`
51			`BCON1_off_addr EQU 0x04 ; Bank 1 configuration register offset`
52			`BCON2_off_addr EQU 0x08 ; Bank 2 configuration register offset`
53			`BCON3_off_addr EQU 0x0C ; Bank 3 configuration register offset`
54
55			`EMI_ENABLE EQU 0x8000`
56			`EMI_SIZE_16 EQU 0x0001`
57
58			`GPIO2_Base_addr EQU 0xE0005000; GPIO2 base address`
59			`PC0_off_addr EQU 0x00 ; Port Configuration Register 0 offset`
60			`PC1_off_addr EQU 0x04 ; Port Configuration Register 1 offset`
61			`PC2_off_addr EQU 0x08 ; Port Configuration Register 2 offset`
62			`PD_off_addr EQU 0x0C ; Port Data Register offset`
63
64			`CPM_Base_addr EQU 0xA0000040; CPM Base Address`
65			`BOOTCR_off_addr EQU 0x10 ; CPM - Boot Configuration Register`
66			`FLASH_mask EQU 0x0000 ; to remap FLASH at 0x0`
67			`RAM_mask EQU 0x0002 ; to remap RAM at 0x0`
68
69			`;\|----------------------------------------------------------------------------------\|`
70			`;\| - APB Bridge (System Peripheral) \|`
71			`;\|----------------------------------------------------------------------------------\|`
72			`APB1_base_addr EQU 0xC0000000 ; APB Bridge1 Base Address`
73			`APB2_base_addr EQU 0xE0000000 ; APB Bridge2 Base Address`
74			`CKDIS_off_addr EQU 0x10 ; APB Bridge1 - Clock Disable Register`
75			`SWRES_off_addr EQU 0x14 ; APB Bridge1 - Software Reset Register`
76			`CKDIS1_config_all EQU 0x27FB ; To enable/disable clock of all APB1's peripherals`
77			`SWRES1_config_all EQU 0x27FB ; To reset all APB1's peripherals`
78			`CKDIS2_config_all EQU 0x7FDD ; To enable/disable clock of all APB2's peripherals`
79			`SWRES2_config_all EQU 0x7FDD ; To reset all APB2's peripherals`
80
81
82
83			`;---------------------------------------------------------------`
84			`; ?program_start`
85			`;---------------------------------------------------------------`
86			`MODULE ?program_start`
87			`SECTION IRQ_STACK:DATA:NOROOT(3)`
88			`SECTION FIQ_STACK:DATA:NOROOT(3)`
89			`SECTION UND_STACK:DATA:NOROOT(3)`
90			`SECTION ABT_STACK:DATA:NOROOT(3)`
91			`SECTION SVC_STACK:DATA:NOROOT(3)`
92			`SECTION CSTACK:DATA:NOROOT(3)`
93			`SECTION .text:CODE(2)`
94			`PUBLIC __iar_program_start`
95			`EXTERN ?main`
96			`EXTERN ?main`
97			`CODE32`
98
99
100			`;*******************************************************************************`
101			`;***** -- MACROS -- *****`
102			`;*******************************************************************************`
103			`;*******************************************************************************`
104			`;* Macro Name : EMI_INIT`
105			`;* Description : This macro Initialize EMI bank 1: 16-bit 7 wait state`
106			`;* Input : None.`
107			`;* Output : None.`
108			`;*******************************************************************************`
109			`EMI_INIT MACRO`
110			`LDR r0, =GPIO2_Base_addr ; Configure P2.0 -> 3 in AF_PP mode`
111			`LDR r2, [r0, #PC0_off_addr]`
112			`ORR r2, r2,#0x0000000F`
113			`STR r2, [r0, #PC0_off_addr]`
114			`LDR r2, [r0, #PC1_off_addr]`
115			`ORR r2, r2,#0x0000000F`
116			`STR r2, [r0, #PC1_off_addr]`
117			`LDR r2, [r0, #PC2_off_addr]`
118			`ORR r2, r2,#0x0000000F`
119			`STR r2, [r0, #PC2_off_addr]`
120			`LDR r0, =EMI_Base_addr`
121			`LDR r1, =0x18\|EMI_ENABLE\|EMI_SIZE_16`
122			`STR r1, [r0, #BCON1_off_addr] ; Enable bank 1 16-bit 7 wait state`
123			`ENDM`
124			`;*******************************************************************************`
125			`;* Macro Name : EIC_INIT`
126			`;* Description : This macro Initialize the EIC as following :`
127			`; - IRQ disabled`
128			`; - FIQ disabled`
129			`; - IVR contain the load PC opcode (0xE59FFXXX)`
130			`; - Current priority level equal to 0`
131			`; - All channels are disabled`
132			`; - All channels priority equal to 0`
133			`; - All SIR registers contain offset to the related IRQ`
134			`; table entry`
135			`;* Input : None.`
136			`;* Output : None.`
137			`;*******************************************************************************`
138			`EIC_INIT MACRO`
139
140			`LDR r3, =EIC_Base_addr`
141			`LDR r4, =0xE59F0000`
142			`STR r4, [r3, #IVR_off_addr]; Write the LDR pc,[pc,#offset]`
143			`; instruction code in IVR[31:16]`
144			`LDR r2, =32 ; 32 Channel to initialize`
145			`LDR r0, =T0TIMI_Addr ; Read the address of the IRQs`
146			`; address table`
147			`LDR r1, =0x00000FFF`
148			`AND r0,r0,r1`
149			`LDR r5, =SIR0_off_addr ; Read SIR0 address`
150			`SUB r4,r0,#8 ; subtract 8 for prefetch`
151			`LDR r1, =0xF7E8 ; Add the offset from IVR to 0x00000000`
152			`; address(IVR address + 7E8 = 0x00000000)`
153			`; 0xF7E8 used to complete the`
154			`; LDR pc,[pc,#offset] opcode (0xE59FFXXX)`
155			`ADD r1,r4,r1 ; Compute the jump offset from IVR to the`
156			`; IRQ table entry.`
157			`EIC_INI MOV r4, r1, LSL #16 ; Left shift the result`
158			`STR r4, [r3, r5] ; Store the result in SIRx register`
159			`ADD r1, r1, #4 ; Next IRQ address`
160			`ADD r5, r5, #4 ; Next SIR`
161			`SUBS r2, r2, #1 ; Decrement the number of SIR registers`
162			`; to initialize`
163			`BNE EIC_INI ; If more then continue`
164			`ENDM`
165			`;*******************************************************************************`
166			`;* Macro Name : PERIPHERAL_INIT`
167			`;* Description : This macro reset all device peripherals.`
168			`;* Input : None.`
169			`;* Output : None.`
170			`;*******************************************************************************`
171			`PERIPHERAL_INIT MACRO`
172
173			`LDR r1, =APB1_base_addr ; r0= APB1 base address`
174			`LDR r2, =APB2_base_addr ; r0= APB2 base address`
175			`LDR r0, =CKDIS1_config_all`
176			`STRH r0, [r1, #CKDIS_off_addr]; Clock Disabling for all APB1 peripherals`
177			`LDR r0, =CKDIS2_config_all`
178			`STRH r0, [r2, #CKDIS_off_addr]; Clock Disabling for all APB2 peripherals`
179			`LDR r0, =SWRES1_config_all`
180			`STRH r0, [r1, #SWRES_off_addr]; Keep all APB1 peripherals under reset`
181			`LDR r0, =SWRES2_config_all`
182			`STRH r0, [r2, #SWRES_off_addr]; Keep all APB2 peripherals under reset`
183			`MOV r7, #10 ; Wait that the selected macrocells exit from reset`
184			`loop1 SUBS r7, r7, #1`
185			`BNE loop1`
186			`MOV r0, #0`
187			`STRH r0, [r1, #SWRES_off_addr]; Enable all all APB1 peripherals`
188			`STRH r0, [r2, #SWRES_off_addr]; Enable all all APB2 peripherals`
189			`STRH r0, [r1, #CKDIS_off_addr]; Clock Enabling for all APB1 peripherals`
190			`STRH r0, [r2, #CKDIS_off_addr]; Clock Enabling for all APB2 peripherals`
191			`MOV r7, #10 ; Wait that the selected macrocells exit from reset`
192			`loop2 SUBS r7, r7, #1`
193			`BNE loop2`
194			`ENDM`
195			`;********************************************************************************************`
196
197			`; define remapping`
198			`; If you need to remap memory before entring the main program`
199			`; uncomment next ligne`
200			`; #define remapping`
201
202			`; Then define which memory to remap to address 0x00000000`
203			`; Uncomment next line if you want to remap RAM`
204			`; #define remap_ram`
205
206			`; Uncomment next line if you want to remap FLASH`
207			`; #define remap_flash`
208
209
210			`IMPORT T0TIMI_Addr`
211			`__iar_program_start`
212			`LDR pc, =NextInst`
213			`NextInst`
214			`NOP ; Wait for OSC stabilization`
215			`NOP`
216			`NOP`
217			`NOP`
218			`NOP`
219			`NOP`
220			`NOP`
221			`NOP`
222			`NOP`
223
224			`MSR CPSR_c, #Mode_ABT\|F_Bit\|I_Bit`
225			`ldr sp,=SFE(ABT_STACK) ; End of ABT_STACK`
226
227			`MSR CPSR_c, #Mode_UNDEF\|F_Bit\|I_Bit`
228			`ldr sp,=SFE(UND_STACK) ; End of UNDEF_STACK`
229
230			`MSR CPSR_c, #Mode_SVC\|F_Bit\|I_Bit`
231			`ldr sp,=SFE(SVC_STACK) ; End of SVC_STACK`
232
233
234
235			`; Uncomment next ligne if you need to reset all device pripherals`
236			`; PERIPHERAL_INIT ; Reset all device peripherals`
237
238			`; Uncomment next ligne if you need to enable the EMI Bank 1`
239			`; EMI_INIT ; Initialize EIM Bank 1`
240
241			`;Uncomment next ligne if you need to initialize the EIC`
242			`EIC_INIT ; Initialize EIC`
243
244			`;******************************************************************************`
245			`;REMAPPING`
246			`;Description : Remapping memory whether RAM,FLASH`
247			`; at Address 0x0 after the application has started executing.`
248			`; Remapping is generally done to allow RAM to replace FLASH`
249			`; at 0x0.`
250			`; the remapping of RAM allow copying of vector table into RAM`
251			`; To enable the memory remapping uncomment: (see above)`
252			`; #define remapping to enable memory remapping`
253			`; AND`
254			`; #define remap_ram to remap RAM`
255			`; OR`
256			`; #define remap_flash to remap FLASH`
257			`;******************************************************************************`
258			`#ifdef remapping`
259			`#ifdef remap_flash`
260			`MOV r0, #FLASH_mask`
261			`#endif`
262			`#ifdef remap_ram`
263			`MOV r0, #RAM_mask`
264			`#endif`
265
266			`LDR r1, =CPM_Base_addr`
267			`LDRH r2, [r1, #BOOTCR_off_addr]; Read BOOTCR Register`
268			`BIC r2, r2, #0x03 ; Reset the two LSB bits of BOOTCR`
269			`ORR r2, r2, r0 ; change the two LSB bits of BOOTCR`
270			`STRH r2, [r1, #BOOTCR_off_addr]; Write BOOTCR Register`
271			`#endif`
272
273			`MSR CPSR_c, #Mode_FIQ\|I_Bit; Change to FIQ mode`
274			`ldr sp,=SFE(FIQ_STACK) ; End of FIQ_STACK`
275
276			`MSR CPSR_c, #Mode_IRQ\|I_Bit; Change to IRQ mode`
277			`ldr sp,=SFE(IRQ_STACK) ; End of IRQ_STACK`
278
279			`MSR CPSR_c, #Mode_SYS ; Change to system mode, Enable IRQ and FIQ`
280			`ldr sp,=SFE(CSTACK) ; End of CSTACK(user)`
281
282
283
284			`; --- Now branches to a C lib function that copies RO data from their`
285			`; load region to their execute region, create the RW and ZI regions`
286			`; then jumps to user C main program.`
287
288			`; main() must be called from Supervisor mode`
289			`MSR CPSR_c, #Mode_SVC\|F_Bit\|I_Bit`
290
291			`b ?main ; Note : use B not BL, because an application will`
292			`; never return this way`
293
294			`LTORG`
295
296			`END`
297			`;***************** (C) COPYRIGHT 2003 STMicroelectronics *END OF FILE**`