Subversion Repositories openrisc

/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************

* File Name          : 75x_tim.c

* Author             : MCD Application Team

* Date First Issued  : 03/10/2006

* Description        : This file provides all the TIM software functions.

********************************************************************************

* History:

* 07/17/2006 : V1.0

* 03/10/2006 : V0.1

********************************************************************************

* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS

* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.

* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,

* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE

* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING

* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

*******************************************************************************/

/* Includes ------------------------------------------------------------------*/

#include "75x_tim.h" 

#include "75x_mrcc.h"

/* Private typedef -----------------------------------------------------------*/

/* Private define ------------------------------------------------------------*/

/* Private macro -------------------------------------------------------------*/

/* Private variables ---------------------------------------------------------*/

/* TIM interrupt masks */

#define TIM_IT_Clear_Mask   0x7FFF

#define TIM_IT_Enable_Mask  0x7FFF

/* TIM Input Capture Selection Set/Reset */

#define TIM_IC1S_Set    0x0001

#define TIM_IC1S_Reset  0x003E

/* TIM Input Capture Selection Set/Reset */

#define TIM_IC2S_Set    0x0002

#define TIM_IC2S_Reset  0x003D

/* TIM_SCR Masks bit */

#define TIM_Encoder_Mask                   0x731C

#define TIM_SlaveModeSelection_Mask        0x7307

#define TIM_TriggerSelection_Mask          0x701F

#define TIM_InternalTriggerSelection_Mask  0x031F

/* TIM Encoder mode Set value */

#define TIM_Encoder1_Set  0x0001

#define TIM_Encoder2_Set  0x0002

#define TIM_Encoder3_Set  0x0003

/* TIM Slave Mode Enable Set/Reset value */

#define TIM_SME_Reset  0x731B

#define TIM_SME_Set    0x0004

/* TIM Internal Trigger Selection value */

#define TIM_ITS_TIM0  0x1000

#define TIM_ITS_TIM1  0x2000

#define TIM_ITS_TIM2  0x3000

#define TIM_ITS_PWM   0x4000

/* TIM Trigger Selection value */

#define TIM_TS_IC1_Set  0x0200

#define TIM_TS_IC2_Set  0x0300

/* TIM Slave Mode selction external clock Set value */

#define TIM_SMS_EXTCLK_Set    0x0008

#define TIM_SMS_RESETCLK_Set  0x0000

/* TIM_CR Masks bit */

#define TIM_DBASE_Mask                0x077F

#define TIM_MasterModeSelection_Mask  0xFC7F

#define TIM_CounterMode_Mask          0xFF8F

/* TIM Update flag selection Set/Reset value */

#define TIM_UFS_Reset  0xFFFE

#define TIM_UFS_Set    0x0001

/* TIM Counter value */

#define TIM_COUNTER_Reset  0x0002

#define TIM_COUNTER_Start  0x0004

#define TIM_COUNTER_Stop   0xFFFB

/* TIM One pulse Mode set value */

#define TIM_OPM_Set    0x0008

#define TIM_OPM_Reset  0xFFF7

/* TIM Debug Mode Set/Reset value */

#define TIM_DBGC_Set    0x0400

#define TIM_DBGC_Reset  0xFB7F

/* TIM Input Capture Enable/Disable value */

#define TIM_IC1_Enable  0x0004

#define TIM_IC2_Enable  0x0010

/* TIM Input Capture Polarity Set/Reset value */

#define TIM_IC1P_Set    0x0008

#define TIM_IC2P_Set    0x0020

#define TIM_IC1P_Reset  0x0037

#define TIM_IC2P_Reset  0x001F

/* TIM Output Compare Polarity Set/Reset value */

#define TIM_OC1P_Set    0x0020

#define TIM_OC2P_Set    0x2000

#define TIM_OC1P_Reset  0x3F1F

#define TIM_OC2P_Reset  0x1F3F

/* TIM Output Compare control mode constant */

#define TIM_OCControl_PWM         0x000C

#define TIM_OCControl_OCToggle    0x0006

#define TIM_OCControl_OCInactive  0x0004

#define TIM_OCControl_OCActive    0x0002

#define TIM_OCControl_OCTiming    0x0000

/* TIM Output Compare mode Enable value */

#define TIM_OC1_Enable  0x0010

#define TIM_OC2_Enable  0x1000

/* TIM Output Compare mode Mask value */

#define TIM_OC1C_Mask  0x3F31

#define TIM_OC2C_Mask  0x313F

/* TIM Preload bit Set/Reset value */

#define TIM_PLD1_Set    0x0001

#define TIM_PLD1_Reset  0xFFFE

#define TIM_PLD2_Set    0x0100

#define TIM_PLD2_Reset  0xFEFF

/* TIM OCRM Set/Reset value */

#define TIM_OCRM_Set    0x0080

#define TIM_OCRM_Reset  0x030D

/* Reset Register Masks */

#define TIM_Pulse2_Reset_Mask     0x0000

#define TIM_Prescaler_Reset_Mask  0x0000

#define TIM_Pulse1_Reset_Mask     0x0000

#define TIM_Period_Reset_Mask     0xFFFF

#define TIM_Counter_Reset         0x0002

/* Private function prototypes -----------------------------------------------*/

static void ICAP_ModuleConfig(TIM_TypeDef* TIMx, TIM_InitTypeDef* TIM_InitStruct);

static void Encoder_ModeConfig(TIM_TypeDef* TIMx, TIM_InitTypeDef* TIM_InitStruct);

static void OCM_ModuleConfig(TIM_TypeDef* TIMx, TIM_InitTypeDef* TIM_InitStruct);

/* Private functions ---------------------------------------------------------*/

/******************************************************************************

* Function Name  : TIM_DeInit

* Description    : Deinitializes TIM peripheral registers to their default reset

*                  values.

* Input          : TIMx: where x can be 0, 1 or 2 to select the TIM peripheral.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_DeInit(TIM_TypeDef *TIMx)

{

  if(TIMx == TIM0)

  {

    MRCC_PeripheralSWResetConfig(MRCC_Peripheral_TIM0,ENABLE);

    MRCC_PeripheralSWResetConfig(MRCC_Peripheral_TIM0,DISABLE);

  }

  else if(TIMx == TIM1)

  {

    MRCC_PeripheralSWResetConfig(MRCC_Peripheral_TIM1,ENABLE);

    MRCC_PeripheralSWResetConfig(MRCC_Peripheral_TIM1,DISABLE);

  }

  else if(TIMx == TIM2)

  {

    MRCC_PeripheralSWResetConfig(MRCC_Peripheral_TIM2,ENABLE);

    MRCC_PeripheralSWResetConfig(MRCC_Peripheral_TIM2,DISABLE);

  }

}

/*******************************************************************************

* Function Name  : TIM_Init

* Description    : Initializes the TIMx peripheral according to the specified

*                  parameters in the TIM_InitStruct .

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral.

*                  - TIM_InitStruct: pointer to a TIM_InitTypeDef structure that

*                    contains the configuration information for the specified TIM

*                    peripheral.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_Init(TIM_TypeDef* TIMx, TIM_InitTypeDef* TIM_InitStruct)

{

  /* Set the prescaler value */

  TIMx->PSC = TIM_InitStruct->TIM_Prescaler;

  /* Select the clock source */

  TIM_ClockSourceConfig(TIMx, TIM_InitStruct->TIM_ClockSource,

                           TIM_InitStruct->TIM_ExtCLKEdge);

  /* Select the counter mode */

  TIMx->CR &= TIM_CounterMode_Mask;

  TIMx->CR |= TIM_InitStruct->TIM_CounterMode;

  /* Set the period value */

  TIMx->ARR = TIM_InitStruct->TIM_Period;

  switch(TIM_InitStruct->TIM_Mode)

  {

    case TIM_Mode_OCTiming: case TIM_Mode_OCActive: case TIM_Mode_OCInactive:

    case TIM_Mode_OCToggle: case TIM_Mode_PWM:

      OCM_ModuleConfig(TIMx, TIM_InitStruct);

    break;

    case TIM_Mode_PWMI: case TIM_Mode_IC:

      ICAP_ModuleConfig(TIMx, TIM_InitStruct);

    break;

    case TIM_Mode_Encoder1: case TIM_Mode_Encoder2: case TIM_Mode_Encoder3:

      Encoder_ModeConfig(TIMx, TIM_InitStruct);

    break;

    case TIM_Mode_OPM_PWM: case TIM_Mode_OPM_Toggle: case TIM_Mode_OPM_Active:

      /* Output module configuration */

      OCM_ModuleConfig(TIMx, TIM_InitStruct);

      /* Input module configuration */

      ICAP_ModuleConfig(TIMx, TIM_InitStruct);

      /* Set the slave mode to trigger Mode */

      TIMx->SCR |= TIM_SynchroMode_Trigger;

      /* Repetitive pulse state selection */

      if(TIM_InitStruct->TIM_RepetitivePulse == TIM_RepetitivePulse_Disable)

      {

        TIMx->CR |= TIM_OPM_Set;

      }

      else

      {

        TIMx->CR &= TIM_OPM_Reset;

      }

    break;

    default:

    break;

  }

}

/*******************************************************************************

* Function Name  : TIM_StructInit

* Description    : Fills each TIM_InitStruct member with its default value.

* Input          : TIM_InitStruct : pointer to a TIM_InitTypeDef structure

*                  which will be initialized.

* Output         : None

* Return         : None.

*******************************************************************************/

void TIM_StructInit(TIM_InitTypeDef *TIM_InitStruct)

{

  /* Set the default configuration */

  TIM_InitStruct->TIM_Mode = TIM_Mode_OCTiming;

  TIM_InitStruct->TIM_Prescaler = TIM_Prescaler_Reset_Mask;

  TIM_InitStruct->TIM_ClockSource = TIM_ClockSource_Internal;

  TIM_InitStruct->TIM_ExtCLKEdge = TIM_ExtCLKEdge_Rising;

  TIM_InitStruct->TIM_CounterMode = TIM_CounterMode_Up;

  TIM_InitStruct->TIM_Period = TIM_Period_Reset_Mask;

  TIM_InitStruct->TIM_Channel = TIM_Channel_ALL;

  TIM_InitStruct->TIM_Pulse1 = TIM_Pulse1_Reset_Mask;

  TIM_InitStruct->TIM_Pulse2 = TIM_Pulse2_Reset_Mask;

  TIM_InitStruct->TIM_RepetitivePulse = TIM_RepetitivePulse_Disable;

  TIM_InitStruct->TIM_Polarity1 = TIM_Polarity1_Low;

  TIM_InitStruct->TIM_Polarity2 = TIM_Polarity2_Low;

  TIM_InitStruct->TIM_IC1Selection = TIM_IC1Selection_TI1;

  TIM_InitStruct->TIM_IC2Selection = TIM_IC2Selection_TI1;

  TIM_InitStruct->TIM_IC1Polarity = TIM_IC1Polarity_Rising;

  TIM_InitStruct->TIM_IC2Polarity = TIM_IC2Polarity_Rising;

  TIM_InitStruct->TIM_PWMI_ICSelection = TIM_PWMI_ICSelection_TI1;

  TIM_InitStruct->TIM_PWMI_ICPolarity = TIM_PWMI_ICPolarity_Rising;

}

/*******************************************************************************

* Function Name  : TIM_Cmd

* Description    : Enables or disables the specified TIM peripheral.

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral.

*                  - Newstate: new state of the TIMx peripheral.

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_Cmd(TIM_TypeDef *TIMx, FunctionalState Newstate)

{

 if(Newstate == ENABLE)

  {

    TIMx->CR |= TIM_COUNTER_Start;

  }

  else

  {

    TIMx->CR &= TIM_COUNTER_Stop;

  }

}

/*******************************************************************************

* Function Name  : TIM_ITConfig

* Description    : Enables or disables the TIM interrupts.

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral.

*                  - TIM_IT: specifies the TIM interrupts sources to be enabled

*                    or disabled.

*                    This parameter can be any combination of the following values:

*                         - TIM_IT_IC1: Input Capture 1 Interrupt

*                         - TIM_IT_OC1: Output Compare 1 Interrupt

*                         - TIM_IT_Update: Timer update Interrupt

*                         - TIM_IT_GlobalUpdate: Timer global update Interrupt

*                         - TIM_IT_IC2: Input Capture 2 Interrupt

*                         - TIM_IT_OC2: Output Compare 2 Interrupt

*                  - Newstate: new state of the specified TIMx interrupts.

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_ITConfig(TIM_TypeDef *TIMx, u16 TIM_IT, FunctionalState Newstate)

{

  u16 TIM_IT_Enable = 0;

  TIM_IT_Enable = TIM_IT & TIM_IT_Enable_Mask;

  if(Newstate == ENABLE)

  {

    /* Update interrupt global source: overflow/undeflow, counter reset operation

    or slave mode controller in reset mode */

    if((TIM_IT & TIM_IT_GlobalUpdate) == TIM_IT_GlobalUpdate)

    {

      TIMx->CR &= TIM_UFS_Reset;

    }

    /* Update interrupt source: counter overflow/underflow */

    else if((TIM_IT & TIM_IT_Update) == TIM_IT_Update)

    {

      TIMx->CR |= TIM_UFS_Set;

    }

    /* Select and enable the interrupts requests */

    TIMx->RSR |= TIM_IT_Enable;

    TIMx->RER |= TIM_IT_Enable;

  }

  /* Disable the interrupts requests */

  else

  {

    TIMx->RSR &= ~TIM_IT_Enable;

    TIMx->RER &= ~TIM_IT_Enable;

  }

}

/*******************************************************************************

* Function Name  : TIM_PreloadConfig

* Description    : Enables or disables TIM peripheral Preload register on OCRx.

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral.

*                  - TIM_Channel: specifies the TIM channel to be used.

*                    This parameter can be one of the following values:

*                         - TIM_Channel_1: TIM Channel 1 is used

*                         - TIM_Channel_2: TIM Channel 2 is used

*                         - TIM_Channel_ALL: TIM Channel 1and 2 are used

*                  - Newstate: new state of the TIMx peripheral Preload register

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_PreloadConfig(TIM_TypeDef *TIMx, u16 TIM_Channel, FunctionalState Newstate)

{

  if(Newstate == ENABLE)

  {

    switch (TIM_Channel)

    {

      case TIM_Channel_1:

      TIMx->OMR1 |= TIM_PLD1_Set;

      break;

      case TIM_Channel_2:

      TIMx->OMR1 |= TIM_PLD2_Set;

      break;

      case TIM_Channel_ALL:

      TIMx->OMR1 |= TIM_PLD1_Set | TIM_PLD2_Set;

      break;

      default:

      break;

   }

  }

  else

  {

    switch (TIM_Channel)

    {

      case TIM_Channel_1:

      TIMx->OMR1 &= TIM_PLD1_Reset;

      break;

      case TIM_Channel_2:

      TIMx->OMR1 &= TIM_PLD2_Reset;

      break;

      case TIM_Channel_ALL:

      TIMx->OMR1 &= TIM_PLD1_Reset & TIM_PLD2_Reset;

      break;

      default:

      break;

    }

  }

}

/*******************************************************************************

* Function Name  : TIM_DMAConfig

* Description    : Configures the TIM0’s DMA interface.

* Input          : - TIM_DMASources: specifies the DMA Request sources.

*                    This parameter can be any combination of the following values:

*                         - TIM_DMASource_OC1: Output Compare 1 DMA source

*                         - TIM_DMASource_OC2: Output Compare 2 DMA source

*                         - TIM_DMASource_IC1: Input Capture 1 DMA source

*                         - TIM_DMASource_IC2: Input Capture 2 DMA source

*                         - TIM_DMASource_Update: Timer Update DMA source

*                  - TIM_OCRMState: the state of output compare request mode.

*                    This parameter can be one of the following values:

*                         - TIM_OCRMState_Enable

*                         - TIM_OCRMState_Disable

*                  - TIM_DMABase:DMA Base address.

*                    This parameter can be one of the following values:

*                    TIM_DMABase_CR, TIM_DMABase_SCR, TIM_DMABase_IMCR,

*                    TIM_DMABase_OMR1, TIM_DMABase_RSR,

*                    TIM_DMABase_RER, TIM_DMABase_ISR, TIM_DMABase_CNT,

*                    TIM_DMABase_PSC, TIM_DMABase_ARR, TIM_DMABase_OCR1,

*                    TIM_DMABase_OCR2, TIM_DMABase_ICR1, TIM_DMABase_ICR2

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_DMAConfig(u16 TIM_DMASources, u16 TIM_OCRMState, u16 TIM_DMABase)

{

  /* Select the DMA requests */

  TIM0->RSR &= TIM_DMASources;

  /* Set the OCRM state */

  if(TIM_OCRMState == TIM_OCRMState_Enable)

  {

    TIM0->RSR |= TIM_OCRM_Set;

  }

  else

  {

    TIM0->RSR &= TIM_OCRM_Reset;

  }

  /* Set the DMA Base address */

  TIM0->CR &= TIM_DBASE_Mask;

  TIM0->CR |= TIM_DMABase;

}

/*******************************************************************************

* Function Name  : TIM_DMACmd

* Description    : Enables or disables the TIM0’s DMA interface.

* Input          : - TIM_DMASources: specifies the DMA Request sources.

*                    This parameter can be any combination of the following values:

*                         - TIM_DMASource_OC1: Output Compare 1 DMA source

*                         - TIM_DMASource_OC2: Output Compare 2 DMA source

*                         - TIM_DMASource_IC1: Input Capture 1 DMA source

*                         - TIM_DMASource_IC2: Input Capture 2 DMA source

*                         - TIM_DMASource_Update: Timer Update DMA source

*                  - Newstate: new state of the DMA Request sources.

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_DMACmd(u16 TIM_DMASources, FunctionalState Newstate)

{

  if(Newstate == ENABLE)

  {

    TIM0->RER |= TIM_DMASources;

  }

  else

  {

    TIM0->RER &= ~TIM_DMASources;

  }

}

/*******************************************************************************

* Function Name  : TIM_ClockSourceConfig

* Description    : Configures the TIM clock source.

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral.

*                  - TIM_ClockSource: specifies the TIM clock source to be

*                    selected.

*                    This parameter can be one of the following values:

*                         - TIM_ClockSource_Internal: CK_TIM internal clock

*                         - TIM_ClockSource_TI11: External input pin TI1

*                           connected to IC1 channel.

*                         - TIM_ClockSource_TI12: External input pin TI1

*                           connected to IC2 channel.

*                         - TIM_ClockSource_TI22: External input pin TI2

*                           connected to IC2 channel.

*                         - TIM_ClockSource_TI21: External input pin TI2

*                           connected to IC1 channel.

*                  - TIM_ExtCLKEdge: specifies the External input signal edge.

*                    This parameter can be one of the following values:

*                         - TIM_ExtCLKEdge_Falling : Falling edge selected.

*                         - TIM_ExtCLKEdge_Rising : Rising edge selected.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_ClockSourceConfig(TIM_TypeDef *TIMx, u16 TIM_ClockSource,

                           u16 TIM_ExtCLKEdge)

{

  if(TIM_ClockSource == TIM_ClockSource_Internal)

  {

    /* CK_TIM is used as clock source */

    TIMx->SCR &= TIM_SME_Reset & TIM_SlaveModeSelection_Mask & TIM_TriggerSelection_Mask;

  }

  else

  /* Input Captures are used as TIM external clock */

  {

    TIMx->SCR &= TIM_SME_Reset & TIM_SlaveModeSelection_Mask & TIM_TriggerSelection_Mask;

    TIMx->SCR |= TIM_SMS_EXTCLK_Set | TIM_SME_Set;

    if((TIM_ClockSource == TIM_ClockSource_TI11) ||

      (TIM_ClockSource == TIM_ClockSource_TI21))

    /* Input Capture 1 is selected */

    {

     /* Input capture  Enable */

      TIMx->IMCR |= TIM_IC1_Enable;

      TIMx->SCR |= TIM_TS_IC1_Set;

      if(TIM_ExtCLKEdge == TIM_ExtCLKEdge_Falling)

      /* Set the corresponding polarity */

      {

        TIMx->IMCR |= TIM_IC1P_Set;

      }

      else

      {

        TIMx->IMCR &= TIM_IC1P_Reset;

      }

      if(TIM_ClockSource == TIM_ClockSource_TI11)

      {

        /* External signal TI1 connected to IC1 channel */

        TIMx->IMCR &= TIM_IC1S_Reset;

      }

      else

      {

        /* External signal TI2 connected to IC1 channel */

        TIMx->IMCR |= TIM_IC1S_Set;

      }

    }

    else

    /* Input Capture 2 is selected */

    {

      /* Input capture  Enable */

      TIMx->IMCR |= TIM_IC2_Enable;

      TIMx->SCR |= TIM_TS_IC2_Set;

      if(TIM_ExtCLKEdge == TIM_ExtCLKEdge_Falling)

      /* Set the corresponding polarity */

      {

        TIMx->IMCR |= TIM_IC2P_Set;

      }

      else

      {

         TIMx->IMCR &= TIM_IC2P_Reset;

      }

      if(TIM_ClockSource == TIM_ClockSource_TI22)

      {

        /* External signal TI2 connected to IC2 channel */

        TIMx->IMCR &= TIM_IC2S_Reset;

      }

      else

      {

        /* External signal TI1 connected to IC2 channel */

        TIMx->IMCR |= TIM_IC2S_Set;

      }

    }

  }

}

/*******************************************************************************

* Function Name  : TIM_SetPrescaler

* Description    : Sets the TIM prescaler value.

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral

*                  - Prescaler: TIM prescaler new value.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_SetPrescaler(TIM_TypeDef* TIMx, u16 Prescaler)

{

  TIMx->PSC = Prescaler;

}

/*******************************************************************************

* Function Name  : TIM_SetPeriod

* Description    : Sets the TIM period value.

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral

*                  - Period: TIM period new value.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_SetPeriod(TIM_TypeDef* TIMx, u16 Period)

{

  TIMx->ARR = Period;

}

/*******************************************************************************

* Function Name  : TIM_SetPulse

* Description    : Sets the TIM pulse value.

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral

*                  - TIM_Channel: specifies the TIM channel to be used.

*                    This parameter can be one of the following values:

*                         - TIM_Channel_1: TIM Channel 1 is used

*                         - TIM_Channel_2: TIM Channel 2 is used

*                         - TIM_Channel_ALL: TIM Channel 1and 2 are used

*                  - Pulse: TIM pulse new value.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_SetPulse(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 Pulse)

{

  /* Set Channel 1 pulse value */

  if(TIM_Channel == TIM_Channel_1)

  {

    TIMx->OCR1 = Pulse;

  }

  /* Set Channel 2 pulse value */

  else if(TIM_Channel == TIM_Channel_2)

  {

   TIMx->OCR2 = Pulse;

  }

  /* Set Channel 1 and Channel 2 pulse values */

  else if(TIM_Channel == TIM_Channel_ALL)

  {

    TIMx->OCR1 = Pulse;

    TIMx->OCR2 = Pulse;

  }

}

/*******************************************************************************

* Function Name  : TIM_GetICAP1

* Description    : Gets the Input Capture 1 value.

* Input          : TIMx: where x can be 0, 1 or 2 to select the TIM peripheral

* Output         : None

* Return         : Input Capture 1 Register value.

*******************************************************************************/

u16 TIM_GetICAP1(TIM_TypeDef *TIMx)

{

  return TIMx->ICR1;

}

/*******************************************************************************

* Function Name  : TIM_GetICAP2

* Description    : Gets the Input Capture 2 value.

* Input          : TIMx: where x can be 0, 1 or 2 to select the TIM peripheral

* Output         : None

* Return         : Input Capture 2 Register value

*******************************************************************************/

u16 TIM_GetICAP2(TIM_TypeDef *TIMx)

{

  return TIMx->ICR2;

}

/*******************************************************************************

* Function Name  : TIM_GetPWMIPulse

* Description    : Gets the PWM Input pulse value.

* Input          : TIMx: where x can be 0, 1 or 2 to select the TIM peripheral

* Output         : None

* Return         : Input Capture 2 Register value

*******************************************************************************/

u16 TIM_GetPWMIPulse(TIM_TypeDef *TIMx)

{

  return TIMx->ICR2;

}

/*******************************************************************************

* Function Name  : TIM_GetPWMIPeriod

* Description    : Gets the PWM Input period value.

* Input          : TIMx: where x can be 0, 1 or 2 to select the TIM peripheral

* Output         : None

* Return         : Input Capture 1 Register value

*******************************************************************************/

u16 TIM_GetPWMIPeriod(TIM_TypeDef *TIMx)

{

  return TIMx->ICR1;

}

/*******************************************************************************

* Function Name  : TIM_DebugCmd

* Description    : Enables or disables the specified TIM peripheral Debug control.

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral

*                  - Newstate: new state of the TIMx Debug control.

                     This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_DebugCmd(TIM_TypeDef *TIMx, FunctionalState Newstate)

{

  if(Newstate == ENABLE)

  {

    TIMx->CR |= TIM_DBGC_Set;

  }

  else

  {

    TIMx->CR &= TIM_DBGC_Reset;

  }

}

/*******************************************************************************

* Function Name  : TIM_CounterModeConfig

* Description    : Specifies the Counter Mode to be used.

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral.

*                  - TIM_CounterMode: specifies the Counter Mode to be used

*                    This parameter can be one of the following values:

*                       - TIM_CounterMode_Up: TIM Up Counting Mode

*                       - TIM_CounterMode_Down: TIM Down Counting Mode

*                       - TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1

*                       - TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2

*                       - TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_CounterModeConfig(TIM_TypeDef* TIMx, u16 TIM_CounterMode)

{

  /* Counter mode configuration */

  TIMx->CR &= TIM_CounterMode_Mask;

  TIMx->CR |= TIM_CounterMode;

}

/*******************************************************************************

* Function Name  : TIM_ForcedOCConfig

* Description    : Forces the TIM output waveform to active or inactive level.

* Input          : - TIMx: where x can be 0, 1 or 2 to select the TIM peripheral.

*                  - TIM_Channel: specifies the TIM channel to be used.

*                    This parameter can be one of the following values:

*                       - TIM_Channel_1: Timer Channel 1 is used

*                       - TIM_Channel_2: Timer Channel 2 is used

*                       - TIM_Channel_ALL: Timer Channel 1 and 2 are used

*                 - TIM_ForcedAction: specifies the forced Action to be set to

*                  the output waveform.

*                    This parameter can be one of the following values:

*                       - TIM_ForcedAction_Active: Force active level on OCxREF

*                       - TIM_ForcedAction_InActive: Force inactive level on

*                         OCxREF.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_ForcedOCConfig(TIM_TypeDef* TIMx, u16 TIM_Channel,u16 TIM_ForcedAction)

{

  /* Channel 1 Forced Output Compare mode configuration */

  if(TIM_Channel == TIM_Channel_1)

  {

    TIMx->OMR1 &= TIM_OC1C_Mask;

    TIMx->OMR1 |= TIM_ForcedAction;

  }

  /* Channel 2 Forced Output Compare mode configuration */

  else

  {

    if(TIM_Channel == TIM_Channel_2)

    {

      TIMx->OMR1 &= TIM_OC2C_Mask;

      TIMx->OMR1 |= (TIM_ForcedAction<<8);

    }

    /* Channel 1 and Channel 2 Forced Output Compare mode configuration */

    else

    {

      TIMx->OMR1 &= TIM_OC1C_Mask & TIM_OC2C_Mask;

      TIMx->OMR1 |= TIM_ForcedAction |(TIM_ForcedAction<<8);

    }

  }

}

/*******************************************************************************

* Function Name  : TIM_ResetCounter

* Description    : Re-intializes the TIM counter and generates an update of the

*                  registers.

* Input          : TIMx: where x can be 0, 1 or 2 to select the TIM peripheral

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_ResetCounter(TIM_TypeDef* TIMx)

{

  /* Re-intialize the TIM counter */

  TIMx->CR |= TIM_COUNTER_Reset;

}

/*******************************************************************************

* Function Name  : TIM_SynchroConfig

* Description    : Synchronizes two Timers in a specified mode.

* Input          : - Master: specifies the peripheral master.

*                    This parameter can be one of the following values:

*                    PWM_Master, TIM0_Master, TIM1_Master or TIM2_Master.

*                  - Slave: specifies the peripheral slave.

*                    This parameter can be one of the following values:

*                    PWM_Slave, TIM0_Slave, TIM1_Slave or TIM2_Slave.

*                  - TIM_SynchroAction: specifies the synchronization Action to

*                    be used.

*                    This parameter can be one of the following values:

*                         - TIM_SynchroAction_Enable: The CNT_EN bit is used as TRGO

*                         - TIM_SynchroAction_Update: The Update event is used as TRGO

*                         - TIM_SynchroAction_Reset: The CNT_RST bit is used as TRGO

*                         - TIM_SynchroAction_OC: The OC1 signal is used as TRGO

*                  - TIM_SynchroMode: specifies the synchronization Mode to be used.

*                    This parameter can be one of the following values:

*                         - TIM_SynchroMode_Gated: Both start and stop of the

*                           counter is controlled.

*                         - TIM_SynchroMode_Trigger: Only the start of the

*                           counter is controlled.

*                         - TIM_SynchroMode_External: The rising edge of selected trigger

*                           clocks the counter.

*                         - TIM_SynchroMode_Reset: The rising edge of the selected trigger

*                           signal resets the counter and generates an update of the registers.

* Output         : None

* Return         : None

*******************************************************************************/

void TIM_SynchroConfig(Master_TypeDef Master, Slave_TypeDef Slave,

                       u16 TIM_SynchroAction, u16 TIM_SynchroMode)

{

  switch (Slave)