OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ARM9_AT91SAM9XE_IAR/] [ewp/] [at91sam9xe-ek-sram.mac] - Blame information for rev 586

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 577 jeremybenn
// ---------------------------------------------------------
2
//   ATMEL Microcontroller Software Support  -  ROUSSET  -
3
// ---------------------------------------------------------
4
// The software is delivered "AS IS" without warranty or
5
// condition of any  kind, either express, implied or
6
// statutory. This includes without limitation any warranty
7
// or condition with respect to merchantability or fitness
8
// for any particular purpose, or against the infringements of
9
// intellectual property rights of others.
10
// ---------------------------------------------------------
11
//  File: SAM9XE_SRAM.mac
12
//  User setup file for CSPY debugger.
13
//  1.1 08/Aug/06 jpp    : Creation
14
//
15
//  $Revision: 2 $
16
//
17
// ---------------------------------------------------------
18
__var __mac_i;
19
__var __mac_pt;
20
 
21
/*********************************************************************
22
*
23
*       execUserReset() : JTAG set initially to Full Speed
24
*/
25
execUserReset()
26
{
27
    __message "------------------------------ execUserReset ---------------------------------";
28
    _MapRAMAt0();                          //* Set the RAM memory at 0x00200000 & 0x00000000
29
    __PllSetting();                        //* Init PLL
30
    __PllSetting100MHz();
31
    __message "-------------------------------Set PC Reset ----------------------------------";
32
}
33
 
34
/*********************************************************************
35
*
36
*       execUserPreload() : JTAG set initially to 32kHz
37
*/
38
execUserPreload()
39
{
40
    __message "------------------------------ execUserPreload ---------------------------------";
41
    __hwReset(0);                          //* Hardware Reset: CPU is automatically halted after the reset (JTAG is already configured to 32kHz)
42
    __writeMemory32(0xD3,0x98,"Register"); //*  Set CPSR
43
    __PllSetting();                        //* Init PLL
44
    __PllSetting100MHz();
45
    _MapRAMAt0();                          //* Set the RAM memory at 0x0020 0000 & 0x0000 0000
46
    _InitRSTC();                           //* Enable User Reset to allow execUserReset() execution
47
}
48
 
49
 
50
 
51
/*********************************************************************
52
*
53
*       _InitRSTC()
54
*
55
* Function description
56
*   Initializes the RSTC (Reset controller).
57
*   This makes sense since the default is to not allow user resets, which makes it impossible to
58
*   apply a second RESET via J-Link
59
*/
60
_InitRSTC() {
61
    __writeMemory32(0xA5000001, 0xFFFFFD08,"Memory");    // Allow user reset
62
}
63
 
64
 
65
 
66
/*********************************************************************
67
*
68
*       _MapRAMAt0()
69
* Function description
70
* Remap RAM at 0
71
*/
72
_MapRAMAt0()
73
{
74
// AT91C_MATRIX_MRCR ((AT91_REG *)      0xFFFFEF00) // (MATRIX)  Master Remp Control Register
75
    __mac_i=__readMemory32(0xFFFFEF00,"Memory");
76
    __message "----- AT91C_MATRIX_MRCR  : 0x",__mac_i:%X;
77
 
78
    if ( ((__mac_i & 0x01) == 0) || ((__mac_i & 0x02) == 0)){
79
        __message "------------------------------- The Remap is NOT & REMAP ----------------------------";
80
        __writeMemory32(0x00000003,0xFFFFEF00,"Memory");
81
        __mac_i=__readMemory32(0xFFFFEF00,"Memory");
82
        __message "----- AT91C_MATRIX_MRCR  : 0x",__mac_i:%X;
83
    } else {
84
        __message "------------------------------- The Remap is done -----------------------------------";
85
    }
86
}
87
 
88
 
89
/*********************************************************************
90
*
91
*       __PllSetting()
92
* Function description
93
*   Initializes the PMC.
94
*   1. Enable the Main Oscillator
95
*   2. Configure PLL
96
*   3. Switch Master
97
*/
98
__PllSetting()
99
{
100
     if ((__readMemory32(0xFFFFFC30,"Memory")&0x3) != 0 ) {
101
//* Disable all PMC interrupt ( $$ JPP)
102
//* AT91C_PMC_IDR   ((AT91_REG *) 0xFFFFFC64) //(PMC) Interrupt Disable Register
103
//*    pPmc->PMC_IDR = 0xFFFFFFFF;
104
    __writeMemory32(0xFFFFFFFF,0xFFFFFC64,"Memory");
105
//* AT91C_PMC_PCDR  ((AT91_REG *) 0xFFFFFC14) //(PMC) Peripheral Clock Disable Register
106
    __writeMemory32(0xFFFFFFFF,0xFFFFFC14,"Memory");
107
// Disable all clock only Processor clock is enabled.
108
    __writeMemory32(0xFFFFFFFE,0xFFFFFC04,"Memory");
109
 
110
// AT91C_PMC_MCKR  ((AT91_REG *)        0xFFFFFC30) // (PMC) Master Clock Register
111
    __writeMemory32(0x00000001,0xFFFFFC30,"Memory");
112
    __sleep(10000);
113
 
114
// write reset value to PLLA and PLLB
115
// AT91C_PMC_PLLAR ((AT91_REG *)        0xFFFFFC28) // (PMC) PLL A Register
116
    __writeMemory32(0x00003F00,0xFFFFFC28,"Memory");
117
 
118
// AT91C_PMC_PLLBR ((AT91_REG *)        0xFFFFFC2C) // (PMC) PLL B Register
119
    __writeMemory32(0x00003F00,0xFFFFFC2C,"Memory");
120
    __sleep(10000);
121
 
122
   __message "------------------------------- PLL  Enable -----------------------------------------";
123
   } else {
124
   __message " ********* Core in SLOW CLOCK mode ********* "; }
125
}
126
 
127
 
128
/*********************************************************************
129
*
130
*       __PllSetting100MHz()
131
* Function description
132
*   Set core at 200 MHz and MCK at 100 MHz
133
*/
134
__PllSetting100MHz()
135
{
136
 
137
   __message "------------------------------- PLL Set at 100 MHz ----------------------------------";
138
 
139
//* pPmc->PMC_MOR = (( AT91C_CKGR_OSCOUNT & (0x40 <<8) | AT91C_CKGR_MOSCEN ));
140
    __writeMemory32(0x00004001,0xFFFFFC20,"Memory");
141
    __sleep(10000);
142
// AT91C_PMC_MCKR  ((AT91_REG *)        0xFFFFFC30) // (PMC) Master Clock Register
143
    __writeMemory32(0x00000001,0xFFFFFC30,"Memory");
144
    __sleep(10000);
145
//*   AT91C_BASE_CKGR->CKGR_PLLAR = (AT91C_CKGR_SRCA | ((96 << 16) & AT91C_CKGR_MULA) |
146
//    (AT91C_CKGR_PLLACOUNT | (AT91C_CKGR_OUTA_0 | (9);
147
    __writeMemory32(0x2060BF09,0xFFFFFC28,"Memory");
148
    __sleep(10000);
149
//*   AT91C_BASE_PMC->PMC_MCKR =  AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2;;
150
    __writeMemory32(0x00000102,0xFFFFFC30,"Memory");
151
     __sleep(10000);
152
 
153
}
154
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.