Subversion Repositories openrisc

/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************

* File Name          : 91x_uart.c

* Author             : MCD Application Team

* Date First Issued  : 05/18/2006 : Version 1.0

* Description        : This file provides all the UART software functions.

********************************************************************************

* History:

* 05/24/2006 : Version 1.1

* 05/18/2006 : Version 1.0

********************************************************************************

* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS

* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.

* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,

* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE

* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING

* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

*******************************************************************************/

/* Includes ------------------------------------------------------------------*/

#include "91x_uart.h"

#include "91x_scu.h"

/* Private typedef -----------------------------------------------------------*/

/* Private define ------------------------------------------------------------*/

/* UART IrDA Mask */

#define UART_IrDA_Disable_Mask          0xFFFD  /* IrDA Disable Mask */

#define UART_IrDA_Enable_Mask           0x0002  /* IrDA Enable Mask */

#define IrDA_LowPower_Enable_Mask       0x0004 /*IrDA lower power mode enable*/

#define IrDA_LowPower_Disable_Mask      0xFFFB /*IrDA lower power mode enable*/

/* UART Mask */

#define UART_Enable_Mask                0x0001  /* UART Enable Mask */

#define UART_Disable_Mask               0xFFFE  /* UART Disable Mask */

/* UART LoopBack */

#define UART_LoopBack_Disable_Mask      0xFF7F  /* LoopBack Disable Mask */

#define UART_LoopBack_Enable_Mask       0x0080  /* LoopBack Enable Mask */

#define UART_WordLength_Mask            0xFF9F  /* UART Word Length Mask */

#define UART_Parity_Mask                0xFF79  /* UART Parity Mask */

#define UART_HardwareFlowControl_Mask   0x3FFF  /* UART Hardware Flow Control Mask */

#define UART_TxRxFIFOLevel_Mask         0xFFC0  /* UART Tx Rx FIFO Level Mask */

#define UART_BreakChar_Mask             0x0001  /* UART Break Character send Mask*/

#define UART_FLAG_Mask                  0x1F    /* UART Flag Mask */

#define UART_Mode_Mask                  0xFCFF  /* UART Mode Mask */

#define UART_RTS_LowLevel_Mask          0x0800  /* RTS signal is low */

#define UART_RTS_HighLevel_Mask         0xF7FF  /* RTS signal is High */

#define UART_DTR_LowLevel_Mask          0x0400  /* DTR signal is low */

#define UART_DTR_HighLevel_Mask         0xFBFF  /* DTR signal is High */

#define UART_ClearFlag_Mask             0xAA    /* Clear Flag Mask */

/* Private macro -------------------------------------------------------------*/

/* Private variables ---------------------------------------------------------*/

/* Private function prototypes -----------------------------------------------*/

/* Private functions ---------------------------------------------------------*/

  /*******************************************************************************

* Function Name  : UART_DeInit

* Description    : Deinitializes the UARTx peripheral registers

*                  to their default reset values.

* Input          : UARTx: where x can be 0,1 or 2 to select the UART peripheral.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_DeInit(UART_TypeDef* UARTx)

{

  /* Reset the UARTx registers values */

  if(UARTx == UART0)

  {

    SCU_APBPeriphReset(__UART0,ENABLE);

    SCU_APBPeriphReset(__UART0,DISABLE);

  }

  else if(UARTx == UART1)

  {

    SCU_APBPeriphReset(__UART1,ENABLE);

    SCU_APBPeriphReset(__UART1,DISABLE);

  }

  else if(UARTx == UART2)

  {

    SCU_APBPeriphReset(__UART2,ENABLE);

    SCU_APBPeriphReset(__UART2,DISABLE);

  }

}

/*******************************************************************************

* Function Name  : UART_Init

* Description    : Initializes the UARTx peripheral according to the specified

*                  parameters in the UART_InitStruct .

* Input          : - UARTx: where x can be 0,1or 2 to select the UART peripheral.

*                  - UART_InitStruct: pointer to a UART_InitTypeDef structure

*                    that contains the configuration information for the

*                    specified UART peripheral.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_Init(UART_TypeDef* UARTx, UART_InitTypeDef* UART_InitStruct)

{

  u64 UART_MainClock = 0;

  u32 IntegerDivider = 0;

  u32 FractionalDivider = 0;

  /* Clear the LCR[6:5] bits */

  UARTx->LCR &= UART_WordLength_Mask;

  /* Set the LCR[6:5] bits according to UART_WordLength value */

  UARTx->LCR |= UART_InitStruct->UART_WordLength;

  /* Choose Stop Bits */

  if(UART_InitStruct->UART_StopBits == UART_StopBits_2)

  {

    /* 2 Stop Bit */

    UARTx->LCR |= UART_StopBits_2;

  }

  else

  {

    /* One Stop Bits */

    UARTx->LCR &= UART_StopBits_1;

  }

  /* Configure the Parity */

  /* Clear the LCR[7]and LCR[2:1] bits */

  UARTx->LCR &= UART_Parity_Mask;

  /* Set the LCR[7]and LCR[2:1] bits according to UART_Parity value */

  UARTx->LCR |= UART_InitStruct->UART_Parity;

  /* Configure the BaudRate */

  UART_MainClock = (SCU_GetMCLKFreqValue())*1000;

  if((SCU->CLKCNTR & 0x200) != 0x200)

  {

    UART_MainClock = UART_MainClock/2;

  }

  /* Determine the integer part */

  IntegerDivider = ((100) * (UART_MainClock) / (16 * (UART_InitStruct->UART_BaudRate)));

  UARTx->IBRD = IntegerDivider / 100;

  /* Determine the fractional part */

  FractionalDivider = IntegerDivider - (100 * (UARTx->IBRD));

  UARTx->FBRD = ((((FractionalDivider * 64) + 50) / 100));

  /* Choose the Hardware Flow Control */

  /* Clear the CR[15:14] bits */

  UARTx->CR &=  UART_HardwareFlowControl_Mask;

  /* Set the CR[15:14] bits according to UART_HardwareFlowControl value */

  UARTx->CR |= UART_InitStruct->UART_HardwareFlowControl;

  /* Configure the UART mode */

  /* Clear the CR[9:8] bits */

  UARTx->CR &= UART_Mode_Mask;

  /* Set the CR[9:8] bits according to UART_Mode value */

  UARTx->CR |= UART_InitStruct->UART_Mode;

  /* Enable or disable the FIFOs */

  /* Set the FIFOs Levels */

  if(UART_InitStruct->UART_FIFO == UART_FIFO_Enable)

  {

    /* Enable the FIFOs */

    UARTx->LCR |= UART_FIFO_Enable;

    /* Clear TXIFLSEL and RXIFLSEL bits */

    UARTx->IFLS &=  UART_TxRxFIFOLevel_Mask;

    /* Set RXIFLSEL bits according to UART_RxFIFOLevel value */

    UARTx->IFLS |= (UART_InitStruct->UART_RxFIFOLevel << 3);

    /* Set TXIFLSEL bits according to UART_TxFIFOLevel value */

    UARTx->IFLS |= UART_InitStruct->UART_TxFIFOLevel;

  }

  else

  {

    /* Disable the FIFOs */

    UARTx->LCR &= UART_FIFO_Disable;

  }

}

/*******************************************************************************

* Function Name  : UART_StructInit

* Description    : Fills each UART_InitStruct member with its reset value.

* Input          : UART_InitStruct: pointer to a UART_InitTypeDef structure which

*                  will be initialized.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_StructInit(UART_InitTypeDef* UART_InitStruct)

{

  /* Reset the  UART_InitStruct members */

  UART_InitStruct->UART_WordLength = UART_WordLength_8D;

  UART_InitStruct->UART_StopBits = UART_StopBits_1;

  UART_InitStruct->UART_Parity = UART_Parity_Odd ;

  UART_InitStruct->UART_BaudRate = 9600;

  UART_InitStruct->UART_HardwareFlowControl = UART_HardwareFlowControl_None;

  UART_InitStruct->UART_Mode = UART_Mode_Tx_Rx;

  UART_InitStruct->UART_FIFO = UART_FIFO_Enable;

  UART_InitStruct->UART_TxFIFOLevel = UART_FIFOLevel_1_2;

  UART_InitStruct->UART_RxFIFOLevel = UART_FIFOLevel_1_2;

}

/*******************************************************************************

* Function Name  : UART_Cmd

* Description    : Enables or disables the specified UART peripheral.

* Input          : - UARTx: where x can be 0,1 or 2 to select the UART peripheral

*                  - NewState: new state of the UARTx peripheral.

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_Cmd(UART_TypeDef* UARTx, FunctionalState NewState)

{

  if (NewState == ENABLE)

  {

    /* Enable the selected UART by setting the UARTEN bit in the CR register */

    UARTx->CR |= UART_Enable_Mask;

  }

  else

  {

    /* Disable the selected UART by clearing the UARTEN bit in the CR register */

    UARTx->CR &= UART_Disable_Mask;

  }

}

/*******************************************************************************

* Function Name  : UART_ITConfig

* Description    : Enables or disables the specified UART interrupts.

* Input          : - UARTx: where x can be 0,1 or 2 to select the UART peripheral

*                  - UART_IT: specifies the UART interrupts sources to be

*                    enabled or disabled. This parameter can be any combination

*                    of the following values:

*                       - UART_IT_OverrunError: Overrun Error interrupt

*                       - UART_IT_BreakError: Break Error interrupt

*                       - UART_IT_ParityError: Parity Error interrupt

*                       - UART_IT_FrameError: Frame Error interrupt

*                       - UART_IT_ReceiveTimeOut: Receive Time Out interrupt

*                       - UART_IT_Transmit: Transmit interrupt

*                       - UART_IT_Receive: Receive interrupt

*                       - UART_IT_DSR: DSR interrupt

*                       - UART_IT_DCD: DCD interrupt

*                       - UART_IT_CTS: CTS interrupt

*                       - UART_IT_RI: RI interrupt

*                  - NewState: new state of the UARTx peripheral.

*                  This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_ITConfig(UART_TypeDef* UARTx, u16 UART_IT, FunctionalState NewState)

{

 if(NewState == ENABLE)

  {

    /* Enables the selected interrupts */

    UARTx->IMSC |= UART_IT;

  }

  else

  {

    /* Disables the selected interrupts */

    UARTx->IMSC &= ~UART_IT;

  }

}

/*******************************************************************************

* Function Name  : UART_DMAConfig

* Description    : Configures the UARTx’s DMA interface.

* Input          : - UARTx: where x can be 1 or 2 to select the UART peripheral

*                  - UART_DMAOnError: specifies the DMA on error request.

*                    This parameter can be:

*                         - UART_DMAOnError_Enable: DMA receive request enabled

*                           when the UART error interrupt is asserted.

*                         - UART_DMAOnError_Disable: DMA receive request disabled

*                           when the UART error interrupt is asserted.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_DMAConfig(UART_TypeDef* UARTx, u16 UART_DMAOnError)

{

  if(UART_DMAOnError == UART_DMAOnError_Enable)

  {

    UARTx->DMACR &= UART_DMAOnError_Enable;

  }

  else

  {

    UARTx->DMACR |= UART_DMAOnError_Disable;

  }

}

/*******************************************************************************

* Function Name  : UART_DMACmd

* Description    : Enables or disables the UARTx’s DMA interface.

* Input          : - UARTx: where x can be 1 or 2 to select the UART peripheral

*                  - UART_DMAReq: enables or disables the request of DMA from UART.

*                    This parameter can be:

*                     - UART_DMAReq_Tx: Transmit DMA Enable

*                     - UART_DMAReq_Rx: Receive DMA Enable

*                  - NewState: new state of the UARTx peripheral.

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_DMACmd(UART_TypeDef* UARTx, u8 UART_DMAReq, FunctionalState NewState)

{

  if(UART_DMAReq == UART_DMAReq_Tx)

  {

    if(NewState == ENABLE)

    {

      UARTx->DMACR |=  UART_DMAReq_Tx;

    }

    else

    {

      UARTx->DMACR &= ~UART_DMAReq_Tx;

    }

  }

   if(UART_DMAReq == UART_DMAReq_Rx)

  {

    if(NewState == ENABLE)

    {

      UARTx->DMACR |=  UART_DMAReq_Rx;

    }

    else

    {

      UARTx->DMACR &= ~UART_DMAReq_Rx;

    }

  }

}

/*******************************************************************************

* Function Name  : UART_LoopBackConfig

* Description    : Enables or disables the LoopBack mode.

* Input          : - UARTx: where x can be 0,1 or 2 to select the UART peripheral

*                  - NewState: new state of the UARTx peripheral.

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_LoopBackConfig(UART_TypeDef* UARTx, FunctionalState NewState)

{

  if (NewState == ENABLE)

  {

    /* Enable the LoopBack mode of the specified UART */

    UARTx->CR |= UART_LoopBack_Enable_Mask;

  }

  else

  {

    /* Disable the LoopBack mode of the specified UART */

    UARTx->CR &= UART_LoopBack_Disable_Mask;

  }

}

/*******************************************************************************

* Function Name  : UART_GetFlagStatus

* Description    : Checks whether the specified UART flag is set or not.

* Input          : - UARTx: where x can be 0,1 or 2 to select the UART peripheral

*                  - UART_FLAG: specifies the flag to check.

*                    This parameter can be one of the following values:

*                     - UART_FLAG_OverrunError: Overrun error flag

*                     - UART_FLAG_Break: break error flag

*                     - UART_FLAG_ParityError: parity error flag

*                     - UART_FLAG_FrameError: frame error flag

*                     - UART_FLAG_RI: RI flag

*                     - UART_FLAG_TxFIFOEmpty: Transmit FIFO Empty flag

*                     - UART_FLAG_RxFIFOFull: Receive FIFO Full flag

*                     - UART_FLAG_TxFIFOFull: Transmit FIFO Full flag

*                     - UART_FLAG_RxFIFOEmpty: Receive FIFO Empty flag

*                     - UART_FLAG_Busy: UART Busy flag

*                     - UART_FLAG_CTS: CTS flag

*                     - UART_FLAG_DCD: DCD flag

*                     - UART_FLAG_DSR: DSR flag

*                     - UART_RawIT_OverrunError: Overrun Error interrupt flag

*                     - UART_RawIT_BreakError: Break Error interrupt flag

*                     - UART_RawIT_ParityError: Parity Error interrupt flag

*                     - UART_RawIT_FrameError: Frame Error interrupt flag

*                     - UART_RawIT_ReceiveTimeOut: ReceiveTimeOut interrupt flag

*                     - UART_RawIT_Transmit: Transmit interrupt flag

*                     - UART_RawIT_Receive: Receive interrupt flag

*                     - UART_RawIT_DSR: DSR interrupt flag

*                     - UART_RawIT_DCD: DCD interrupt flag

*                     - UART_RawIT_CTS: CTS interrupt flag

*                     - UART_RawIT_RI: RI interrupt flag

* Output         : None

* Return         : The new state of UART_FLAG (SET or RESET).

*******************************************************************************/

FlagStatus UART_GetFlagStatus(UART_TypeDef* UARTx, u16 UART_FLAG)

{

  u32 UARTReg = 0, FlagPos = 0;

  u32 StatusReg = 0;

  /* Get the UART register index */

  UARTReg = UART_FLAG >> 5;

  /* Get the flag position */

  FlagPos = UART_FLAG & UART_FLAG_Mask;

  if(UARTReg == 1) /* The flag to check is in RSR register */

  {

    StatusReg = UARTx->RSECR;

  }

  else if (UARTReg == 2) /* The flag to check is in FR register */

  {

    StatusReg = UARTx->FR;

  }

  else if(UARTReg == 3) /* The flag to check is in RIS register */

  {

    StatusReg = UARTx->RIS;

  }

  if((StatusReg & (1 << FlagPos))!= RESET)

  {

    return SET;

  }

  else

  {

    return RESET;

  }

}

/*******************************************************************************

* Function Name  : UART_ClearFlag

* Description    : Clears the UARTx’s flags(Frame, Parity, Break, Overrun error).

* Input          : - UARTx: where x can be 0,1or 2 to select the UART peripheral.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_ClearFlag(UART_TypeDef* UARTx)

{

  /* Clear the flag */

  UARTx->RSECR = UART_ClearFlag_Mask;

}

/*******************************************************************************

* Function Name  : UART_GetITStatus

* Description    : Checks whether the specified UART interrupt has occured or not.

* Input          : - UARTx: where x can be 0,1or 2 to select the UART peripheral.

*                  - UART_IT: specifies the interrupt pending bit to be checked.

*                    This parameter can be one of the following values:

*                       - UART_IT_OverrunError: Overrun Error interrupt

*                       - UART_IT_BreakError: Break Error interrupt

*                       - UART_IT_ParityError: Parity Error interrupt

*                       - UART_IT_FrameError: Frame Error interrupt

*                       - UART_IT_ReceiveTimeOut: Receive Time Out interrupt

*                       - UART_IT_Transmit: Transmit interrupt

*                       - UART_IT_Receive: Receive interrupt

*                       - UART_IT_DSR: DSR interrupt

*                       - UART_IT_DCD: DCD interrupt

*                       - UART_IT_CTS: CTS interrupt

*                       - UART_IT_RI: RI interrupt

* Output         : None

* Return         : The new state of UART_IT (SET or RESET).

*******************************************************************************/

ITStatus UART_GetITStatus(UART_TypeDef* UARTx, u16 UART_IT)

{

  if((UARTx->MIS & UART_IT) != RESET)

  {

    return SET;

  }

  else

  {

    return RESET;

  }

}

/*******************************************************************************

* Function Name  : UART_ClearITPendingBit

* Description    : Clears the UARTx’s interrupt pending bits.

* Input          : - UARTx: where x can be 0,1or 2 to select the UART peripheral.

*                  - UART_IT: specifies the interrupt pending bit to clear.

*                    More than one interrupt can be cleared using the “|” operator.

*                    This parameter can be:

*                       - UART_IT_OverrunError: Overrun Error interrupt

*                       - UART_IT_BreakError: Break Error interrupt

*                       - UART_IT_ParityError: Parity Error interrupt

*                       - UART_IT_FrameError: Frame Error interrupt

*                       - UART_IT_ReceiveTimeOut: Receive Time Out interrupt

*                       - UART_IT_Transmit: Transmit interrupt

*                       - UART_IT_Receive: Receive interrupt

*                       - UART_IT_DSR: DSR interrupt

*                       - UART_IT_DCD: DCD interrupt

*                       - UART_IT_CTS: CTS interrupt

*                       - UART_IT_RI: RI interrupt

* Output         : None

* Return         : None

*******************************************************************************/

void UART_ClearITPendingBit(UART_TypeDef* UARTx, u16 UART_IT)

{

  /* Clear the specified interrupt */

  UARTx->ICR &= UART_IT;

}

/*******************************************************************************

* Function Name  : UART_IrDALowPowerConfig

* Description    : Sets the IrDA low power mode

* Input          : - IrDAx: where x can be 0,1 or 2 to select the UART/IrDA peripheral.

*                  - NewState: new state of the UARTIrDA peripheral.

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_IrDALowPowerConfig(u8 IrDAx, FunctionalState NewState)

{

  UART_TypeDef* UARTx;

  switch(IrDAx)

  {

    case IrDA0: UARTx = UART0;

    break;

    case IrDA1: UARTx = UART1;

    break;

    case IrDA2: UARTx = UART2;

    break;

  }

  if (NewState == ENABLE)

  {

    UARTx->CR |= IrDA_LowPower_Enable_Mask;

  }

  else

  {

    UARTx->CR &= IrDA_LowPower_Disable_Mask;

  }

}

/*******************************************************************************

* Function Name  : UART_IrDASetCounter

* Description    : Sets the IrDA counter divisor value.

* Input          : - UARTx: where x can be 0,1 or 2 to select the UART/IrDA peripheral.

*                  - IrDA_Counter: IrDA counter divisor new value n low power mode(Hz).

* Output         : None

* Return         : None

*******************************************************************************/

void UART_IrDASetCounter(u8 IrDAx, u32 IrDA_Counter)

{

  UART_TypeDef* UARTx;

  u32 APBClock;

  switch(IrDAx)

  {

    case IrDA0: UARTx = UART0;

    break;

    case IrDA1: UARTx = UART1;

    break;

    case IrDA2: UARTx = UART2;

    break;

  }

   /* Get the APB frequency */

  APBClock = (SCU_GetPCLKFreqValue())*1000;

  /* Determine the Counter Divisor part */

  UARTx->ILPR = (((APBClock*10) / ( IrDA_Counter)) + 5 )/10;

 }

/*******************************************************************************

* Function Name  : UART_IrDACmd

* Description    : Enables or disables the UARTx’s IrDA interface.

* Input          : - IrDAx: where x can be 0,1 or 2 to select the UART/IrDA peripheral

*                  - NewState: new state of the UARTx peripheral.

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_IrDACmd(u8 IrDAx, FunctionalState NewState)

{

  UART_TypeDef* UARTx;

  switch(IrDAx)

  {

    case IrDA0: UARTx = UART0;

    break;

    case IrDA1: UARTx = UART1;

    break;

    case IrDA2: UARTx = UART2;

    break;

  }

  if(NewState == ENABLE)

  {

    /* Enable the IrDA mode of the specified UART */

    UARTx->CR |= UART_IrDA_Enable_Mask;

  }

  else

  {

    /* Disable the IrDA mode of the specified UART */

    UARTx->CR &= UART_IrDA_Disable_Mask;

  }

}

/*******************************************************************************

* Function Name  : UART_SendData

* Description    : Transmits signle Byte of data through the UARTx peripheral.

* Input          : - UARTx: where x can be 0,1 or 2 to select the UART peripheral.

*                  - Data: the byte to transmit

* Output         : None

* Return         : None

*******************************************************************************/

void UART_SendData(UART_TypeDef* UARTx, u8 Data)

{

  /* Transmit one byte */

  UARTx->DR = Data;

}

/*******************************************************************************

* Function Name  : UART_ReceiveData

* Description    : Returns the most recent received Byte by the UARTx peripheral.

* Input          : UARTx: where x can be 0,1 or 2 to select the UART peripheral.

* Output         : None

* Return         : The received data

*******************************************************************************/

u8 UART_ReceiveData(UART_TypeDef* UARTx)

{

  /* Receive one byte */

  return ((u8)UARTx->DR);

}

/*******************************************************************************

* Function Name  : UART_SendBreak

* Description    : Transmits break characters.

* Input          : UARTx: where x can be 0,1 or 2 to select the UART peripheral.

* Output         : None

* Return         : None

*******************************************************************************/

void UART_SendBreak(UART_TypeDef* UARTx)

{

  /* Send break characters */

  UARTx->LCR |= UART_BreakChar_Mask;

}

/*******************************************************************************

* Function Name  : UART_RTSConfig

* Description    : Sets or Resets the RTS signal

* Input          : - LevelState: new state of the RTS signal for UART0 only.

*                    This parameter can be: LowLevel or HighLevel

* Output         : None

* Return         : None

*******************************************************************************/

void UART_RTSConfig(UART_LevelTypeDef LevelState)

{

  if(LevelState == LowLevel)

  {

    UART0->CR |= UART_RTS_LowLevel_Mask;

  }

  else

  {

    UART0->CR &= UART_RTS_HighLevel_Mask;

  }

}

/*******************************************************************************

* Function Name  : UART_DTRConfig

* Description    : Sets or Resets the DTR signal for UART0 only

* Input          : - LevelState: new state of the DTR signal.

*                    This parameter can be: LowLevel or HighLevel

* Output         : None

* Return         : None

*******************************************************************************/

void UART_DTRConfig(UART_LevelTypeDef LevelState)

{

  if(LevelState == LowLevel)

  {

    UART0->CR |= UART_DTR_LowLevel_Mask;

  }

  else

  {

    UART0->CR &= UART_DTR_HighLevel_Mask;

  }

}

/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/