OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ARM9_STR91X_IAR/] [serial/] [serial.c] - Blame information for rev 613

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 577 jeremybenn
/*
2
    FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd.
3
 
4
    ***************************************************************************
5
    *                                                                         *
6
    * If you are:                                                             *
7
    *                                                                         *
8
    *    + New to FreeRTOS,                                                   *
9
    *    + Wanting to learn FreeRTOS or multitasking in general quickly       *
10
    *    + Looking for basic training,                                        *
11
    *    + Wanting to improve your FreeRTOS skills and productivity           *
12
    *                                                                         *
13
    * then take a look at the FreeRTOS books - available as PDF or paperback  *
14
    *                                                                         *
15
    *        "Using the FreeRTOS Real Time Kernel - a Practical Guide"        *
16
    *                  http://www.FreeRTOS.org/Documentation                  *
17
    *                                                                         *
18
    * A pdf reference manual is also available.  Both are usually delivered   *
19
    * to your inbox within 20 minutes to two hours when purchased between 8am *
20
    * and 8pm GMT (although please allow up to 24 hours in case of            *
21
    * exceptional circumstances).  Thank you for your support!                *
22
    *                                                                         *
23
    ***************************************************************************
24
 
25
    This file is part of the FreeRTOS distribution.
26
 
27
    FreeRTOS is free software; you can redistribute it and/or modify it under
28
    the terms of the GNU General Public License (version 2) as published by the
29
    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
30
    ***NOTE*** The exception to the GPL is included to allow you to distribute
31
    a combined work that includes FreeRTOS without being obliged to provide the
32
    source code for proprietary components outside of the FreeRTOS kernel.
33
    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
34
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
35
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
36
    more details. You should have received a copy of the GNU General Public
37
    License and the FreeRTOS license exception along with FreeRTOS; if not it
38
    can be viewed here: http://www.freertos.org/a00114.html and also obtained
39
    by writing to Richard Barry, contact details for whom are available on the
40
    FreeRTOS WEB site.
41
 
42
    1 tab == 4 spaces!
43
 
44
    http://www.FreeRTOS.org - Documentation, latest information, license and
45
    contact details.
46
 
47
    http://www.SafeRTOS.com - A version that is certified for use in safety
48
    critical systems.
49
 
50
    http://www.OpenRTOS.com - Commercial support, development, porting,
51
    licensing and training services.
52
*/
53
 
54
/*
55
        BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART1.
56
*/
57
 
58
/* Library includes. */
59
#include "91x_lib.h"
60
 
61
/* Scheduler includes. */
62
#include "FreeRTOS.h"
63
#include "queue.h"
64
#include "semphr.h"
65
 
66
/* Demo application includes. */
67
#include "serial.h"
68
/*-----------------------------------------------------------*/
69
 
70
/* Misc defines. */
71
#define serINVALID_QUEUE                                ( ( xQueueHandle ) 0 )
72
#define serNO_BLOCK                                             ( ( portTickType ) 0 )
73
#define serTX_BLOCK_TIME                                ( 40 / portTICK_RATE_MS )
74
 
75
/* Interrupt and status bit definitions. */
76
#define mainTXRIS 0x20  
77
#define mainRXRIS 0x50
78
#define serTX_FIFO_FULL 0x20
79
#define serCLEAR_ALL_INTERRUPTS 0x3ff
80
/*-----------------------------------------------------------*/
81
 
82
/* The queue used to hold received characters. */
83
static xQueueHandle xRxedChars;
84
 
85
/* The semaphore used to wake a task waiting for space to become available
86
in the FIFO. */
87
static xSemaphoreHandle xTxFIFOSemaphore;
88
 
89
/*-----------------------------------------------------------*/
90
 
91
/* UART interrupt handler. */
92
void UART1_IRQHandler( void );
93
 
94
/* The interrupt service routine - called from the assembly entry point. */
95
__arm void UART1_IRQHandler( void );
96
 
97
/*-----------------------------------------------------------*/
98
 
99
/* Flag to indicate whether or not a task is blocked waiting for space on
100
the FIFO. */
101
static long lTaskWaiting = pdFALSE;
102
 
103
/*
104
 * See the serial2.h header file.
105
 */
106
xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
107
{
108
xComPortHandle xReturn;
109
UART_InitTypeDef xUART1_Init;
110
GPIO_InitTypeDef GPIO_InitStructure;
111
 
112
        /* Create the queues used to hold Rx characters. */
113
        xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
114
 
115
        /* Create the semaphore used to wake a task waiting for space to become
116
        available in the FIFO. */
117
        vSemaphoreCreateBinary( xTxFIFOSemaphore );
118
 
119
        /* If the queue/semaphore was created correctly then setup the serial port
120
        hardware. */
121
        if( ( xRxedChars != serINVALID_QUEUE ) && ( xTxFIFOSemaphore != serINVALID_QUEUE ) )
122
        {
123
                /* Pre take the semaphore so a task will block if it tries to access
124
                it. */
125
                xSemaphoreTake( xTxFIFOSemaphore, 0 );
126
 
127
                /* Configure the UART. */
128
                xUART1_Init.UART_WordLength = UART_WordLength_8D;
129
                xUART1_Init.UART_StopBits = UART_StopBits_1;
130
                xUART1_Init.UART_Parity = UART_Parity_No;
131
                xUART1_Init.UART_BaudRate = ulWantedBaud;
132
                xUART1_Init.UART_HardwareFlowControl = UART_HardwareFlowControl_None;
133
                xUART1_Init.UART_Mode = UART_Mode_Tx_Rx;
134
                xUART1_Init.UART_FIFO = UART_FIFO_Enable;
135
 
136
                /* Enable the UART1 Clock */
137
                SCU_APBPeriphClockConfig( __UART1, ENABLE );
138
 
139
                /* Enable the GPIO3 Clock */
140
                SCU_APBPeriphClockConfig( __GPIO3, ENABLE );
141
 
142
                /* Configure UART1_Rx pin GPIO3.2 */
143
                GPIO_InitStructure.GPIO_Direction = GPIO_PinInput;
144
                GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
145
                GPIO_InitStructure.GPIO_Type = GPIO_Type_PushPull ;
146
                GPIO_InitStructure.GPIO_IPConnected = GPIO_IPConnected_Enable;
147
                GPIO_InitStructure.GPIO_Alternate = GPIO_InputAlt1 ;
148
                GPIO_Init( GPIO3, &GPIO_InitStructure );
149
 
150
                /* Configure UART1_Tx pin GPIO3.3 */
151
                GPIO_InitStructure.GPIO_Direction = GPIO_PinOutput;
152
                GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3;
153
                GPIO_InitStructure.GPIO_Type = GPIO_Type_PushPull ;
154
                GPIO_InitStructure.GPIO_IPConnected = GPIO_IPConnected_Enable;
155
                GPIO_InitStructure.GPIO_Alternate = GPIO_OutputAlt2 ;
156
                GPIO_Init( GPIO3, &GPIO_InitStructure );
157
 
158
 
159
                portENTER_CRITICAL();
160
                {
161
                        /* Configure the UART itself. */
162
                        UART_DeInit( UART1 );
163
                        UART_Init( UART1, &xUART1_Init );
164
                        UART_ITConfig( UART1, UART_IT_Receive | UART_IT_Transmit, ENABLE );
165
                        UART1->ICR = serCLEAR_ALL_INTERRUPTS;
166
                        UART_LoopBackConfig( UART1, DISABLE );
167
                        UART_IrDACmd( IrDA1, DISABLE );
168
 
169
                        /* Configure the VIC for the UART interrupts. */
170
                        VIC_Config( UART1_ITLine, VIC_IRQ, 9 );
171
                        VIC_ITCmd( UART1_ITLine, ENABLE );
172
 
173
                        UART_Cmd( UART1, ENABLE );
174
                        lTaskWaiting = pdFALSE;
175
                }
176
                portEXIT_CRITICAL();
177
        }
178
        else
179
        {
180
                xReturn = ( xComPortHandle ) 0;
181
        }
182
 
183
        /* This demo file only supports a single port but we have to return
184
        something to comply with the standard demo header file. */
185
        return xReturn;
186
}
187
/*-----------------------------------------------------------*/
188
 
189
signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, portTickType xBlockTime )
190
{
191
        /* The port handle is not required as this driver only supports one port. */
192
        ( void ) pxPort;
193
 
194
        /* Get the next character from the buffer.  Return false if no characters
195
        are available, or arrive before xBlockTime expires. */
196
        if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
197
        {
198
                return pdTRUE;
199
        }
200
        else
201
        {
202
                return pdFALSE;
203
        }
204
}
205
/*-----------------------------------------------------------*/
206
 
207
void vSerialPutString( xComPortHandle pxPort, const signed char * const pcString, unsigned short usStringLength )
208
{
209
signed char *pxNext;
210
 
211
        /* A couple of parameters that this port does not use. */
212
        ( void ) usStringLength;
213
        ( void ) pxPort;
214
 
215
        /* NOTE: This implementation does not handle the queue being full as no
216
        block time is used! */
217
 
218
        /* The port handle is not required as this driver only supports UART1. */
219
        ( void ) pxPort;
220
 
221
        /* Send each character in the string, one at a time. */
222
        pxNext = ( signed char * ) pcString;
223
        while( *pxNext )
224
        {
225
                xSerialPutChar( pxPort, *pxNext, serNO_BLOCK );
226
                pxNext++;
227
        }
228
}
229
/*-----------------------------------------------------------*/
230
 
231
signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, portTickType xBlockTime )
232
{
233
portBASE_TYPE xReturn;
234
 
235
        portENTER_CRITICAL();
236
        {
237
                /* Can we write to the FIFO? */
238
                if( UART1->FR & serTX_FIFO_FULL )
239
                {
240
                        /* Wait for the interrupt letting us know there is space on the
241
                        FIFO.  It is ok to block in a critical section, interrupts will be
242
                        enabled for other tasks once we force a switch. */
243
                        lTaskWaiting = pdTRUE;
244
 
245
                        /* Just to be a bit different this driver uses a semaphore to
246
                        block the sending task when the FIFO is full.  The standard COMTest
247
                        task assumes a queue of adequate length exists so does not use
248
                        a block time.  For this demo the block time is therefore hard
249
                        coded. */
250
                        xReturn = xSemaphoreTake( xTxFIFOSemaphore, serTX_BLOCK_TIME );
251
                        if( xReturn )
252
                        {
253
                                UART1->DR = cOutChar;
254
                        }
255
                }
256
                else
257
                {
258
                        UART1->DR = cOutChar;
259
                        xReturn = pdPASS;
260
                }
261
        }
262
        portEXIT_CRITICAL();
263
 
264
        return xReturn;
265
}
266
/*-----------------------------------------------------------*/
267
 
268
void vSerialClose( xComPortHandle xPort )
269
{
270
        /* Not supported as not required by the demo application. */
271
}
272
/*-----------------------------------------------------------*/
273
 
274
void UART1_IRQHandler( void )
275
{
276
signed char cChar;
277
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
278
 
279
        while( UART1->RIS &     mainRXRIS )
280
        {
281
                /* The interrupt was caused by a character being received.  Grab the
282
                character from the DR and place it in the queue of received
283
                characters. */
284
                cChar = UART1->DR;
285
                xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );
286
        }
287
 
288
        if( UART1->RIS & mainTXRIS )
289
        {
290
                if( lTaskWaiting == pdTRUE )
291
                {
292
                        /* This interrupt was caused by space becoming available on the Tx
293
                        FIFO, wake any task that is waiting to post (if any). */
294
                        xSemaphoreGiveFromISR( xTxFIFOSemaphore, &xHigherPriorityTaskWoken );
295
                        lTaskWaiting = pdFALSE;
296
                }
297
 
298
                UART1->ICR = mainTXRIS;
299
        }
300
 
301
        /* If a task was woken by either a character being received or a character
302
        being transmitted then we may need to switch to another task. */
303
        portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
304
}
305
 
306
 
307
 
308
 
309
 
310
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.