OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [AVR32_UC3/] [BOARDS/] [EVK1100/] [led.h] - Blame information for rev 609

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 589 jeremybenn
/*This file is prepared for Doxygen automatic documentation generation.*/
2
/*! \file *********************************************************************
3
 *
4
 * \brief AT32UC3A EVK1100 board LEDs support package.
5
 *
6
 * This file contains definitions and services related to the LED features of
7
 * the EVK1100 board.
8
 *
9
 * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
10
 * - Supported devices:  All AVR32 AT32UC3A devices can be used.
11
 * - AppNote:
12
 *
13
 * \author               Atmel Corporation: http://www.atmel.com \n
14
 *                       Support and FAQ: http://support.atmel.no/
15
 *
16
 ******************************************************************************/
17
 
18
/* Copyright (c) 2007, Atmel Corporation All rights reserved.
19
 *
20
 * Redistribution and use in source and binary forms, with or without
21
 * modification, are permitted provided that the following conditions are met:
22
 *
23
 * 1. Redistributions of source code must retain the above copyright notice,
24
 * this list of conditions and the following disclaimer.
25
 *
26
 * 2. Redistributions in binary form must reproduce the above copyright notice,
27
 * this list of conditions and the following disclaimer in the documentation
28
 * and/or other materials provided with the distribution.
29
 *
30
 * 3. The name of ATMEL may not be used to endorse or promote products derived
31
 * from this software without specific prior written permission.
32
 *
33
 * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
34
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
35
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
36
 * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
37
 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
38
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
39
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
40
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
41
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
42
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
43
 */
44
 
45
 
46
#ifndef _LED_H_
47
#define _LED_H_
48
 
49
#include "compiler.h"
50
 
51
 
52
/*! \name Identifiers of LEDs to Use with LED Functions
53
 */
54
//! @{
55
#define LED0  0x01
56
#define LED1  0x02
57
#define LED2  0x04
58
#define LED3  0x08
59
#define LED4  0x10
60
#define LED5  0x20
61
#define LED6  0x40
62
#define LED7  0x80
63
//! @}
64
 
65
 
66
/*! \brief Gets the last state of all LEDs set through the LED API.
67
 *
68
 * \return State of all LEDs (1 bit per LED).
69
 *
70
 * \note The GPIO pin configuration of all LEDs is left unchanged.
71
 */
72
extern U32 LED_Read_Display(void);
73
 
74
/*! \brief Sets the state of all LEDs.
75
 *
76
 * \param leds New state of all LEDs (1 bit per LED).
77
 *
78
 * \note The pins of all LEDs are set to GPIO output mode.
79
 */
80
extern void LED_Display(U32 leds);
81
 
82
/*! \brief Gets the last state of the specified LEDs set through the LED API.
83
 *
84
 * \param mask LEDs of which to get the state (1 bit per LED).
85
 *
86
 * \return State of the specified LEDs (1 bit per LED).
87
 *
88
 * \note The GPIO pin configuration of all LEDs is left unchanged.
89
 */
90
extern U32 LED_Read_Display_Mask(U32 mask);
91
 
92
/*! \brief Sets the state of the specified LEDs.
93
 *
94
 * \param mask LEDs of which to set the state (1 bit per LED).
95
 *
96
 * \param leds New state of the specified LEDs (1 bit per LED).
97
 *
98
 * \note The pins of the specified LEDs are set to GPIO output mode.
99
 */
100
extern void LED_Display_Mask(U32 mask, U32 leds);
101
 
102
/*! \brief Tests the last state of the specified LEDs set through the LED API.
103
 *
104
 * \param leds LEDs of which to test the state (1 bit per LED).
105
 *
106
 * \return \c TRUE if at least one of the specified LEDs has a state on, else
107
 *         \c FALSE.
108
 *
109
 * \note The GPIO pin configuration of all LEDs is left unchanged.
110
 */
111
extern Bool LED_Test(U32 leds);
112
 
113
/*! \brief Turns off the specified LEDs.
114
 *
115
 * \param leds LEDs to turn off (1 bit per LED).
116
 *
117
 * \note The pins of the specified LEDs are set to GPIO output mode.
118
 */
119
extern void LED_Off(U32 leds);
120
 
121
/*! \brief Turns on the specified LEDs.
122
 *
123
 * \param leds LEDs to turn on (1 bit per LED).
124
 *
125
 * \note The pins of the specified LEDs are set to GPIO output mode.
126
 */
127
extern void LED_On(U32 leds);
128
 
129
/*! \brief Toggles the specified LEDs.
130
 *
131
 * \param leds LEDs to toggle (1 bit per LED).
132
 *
133
 * \note The pins of the specified LEDs are set to GPIO output mode.
134
 */
135
extern void LED_Toggle(U32 leds);
136
 
137
/*! \brief Gets as a bit-field the last state of the specified LEDs set through
138
 *         the LED API.
139
 *
140
 * \param field LEDs of which to get the state (1 bit per LED).
141
 *
142
 * \return State of the specified LEDs (1 bit per LED, beginning with the first
143
 *         specified LED).
144
 *
145
 * \note The GPIO pin configuration of all LEDs is left unchanged.
146
 */
147
extern U32 LED_Read_Display_Field(U32 field);
148
 
149
/*! \brief Sets as a bit-field the state of the specified LEDs.
150
 *
151
 * \param field LEDs of which to set the state (1 bit per LED).
152
 * \param leds New state of the specified LEDs (1 bit per LED, beginning with
153
 *             the first specified LED).
154
 *
155
 * \note The pins of the specified LEDs are set to GPIO output mode.
156
 */
157
extern void LED_Display_Field(U32 field, U32 leds);
158
 
159
/*! \brief Gets the intensity of the specified LED.
160
 *
161
 * \param led LED of which to get the intensity (1 bit per LED; only the least
162
 *            significant set bit is used).
163
 *
164
 * \return Intensity of the specified LED (0x00 to 0xFF).
165
 *
166
 * \warning The PWM channel of the specified LED is supposed to be used only by
167
 *          this module.
168
 *
169
 * \note The GPIO pin configuration of all LEDs is left unchanged.
170
 */
171
extern U8 LED_Get_Intensity(U32 led);
172
 
173
/*! \brief Sets the intensity of the specified LEDs.
174
 *
175
 * \param leds LEDs of which to set the intensity (1 bit per LED).
176
 * \param intensity New intensity of the specified LEDs (0x00 to 0xFF).
177
 *
178
 * \warning The PWM channels of the specified LEDs are supposed to be used only
179
 *          by this module.
180
 *
181
 * \note The pins of the specified LEDs are set to PWM output mode.
182
 */
183
extern void LED_Set_Intensity(U32 leds, U8 intensity);
184
 
185
 
186
#endif  // _LED_H_

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.