OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_AT91SAM3U256_IAR/] [system/] [led.c] - Blame information for rev 580

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 580 jeremybenn 
/* ----------------------------------------------------------------------------
2 
 *         ATMEL Microcontroller Software Support
3 
 * ----------------------------------------------------------------------------
4 
 * Copyright (c) 2008, Atmel Corporation
5 
 *
6 
 * All rights reserved.
7 
 *
8 
 * Redistribution and use in source and binary forms, with or without
9 
 * modification, are permitted provided that the following conditions are met:
10 
 *
11 
 * - Redistributions of source code must retain the above copyright notice,
12 
 * this list of conditions and the disclaimer below.
13 
 *
14 
 * Atmel's name may not be used to endorse or promote products derived from
15 
 * this software without specific prior written permission.
16 
 *
17 
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
18 
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
19 
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
20 
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
21 
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
23 
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
24 
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
25 
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
26 
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 
 * ----------------------------------------------------------------------------
28 
 */
29 
 
30 
//------------------------------------------------------------------------------
31 
//         Headers
32 
//------------------------------------------------------------------------------
33 
 
34 
#include "led.h"
35 
#include <board.h>
36 
#include <pio/pio.h>
37 
 
38 
//------------------------------------------------------------------------------
39 
//         Local Variables
40 
//------------------------------------------------------------------------------
41 
 
42 
#ifdef PINS_LEDS
43 
static const Pin pinsLeds[] = {PINS_LEDS};
44 
static const unsigned int numLeds = PIO_LISTSIZE(pinsLeds);
45 
#endif
46 
 
47 
//------------------------------------------------------------------------------
48 
//         Global Functions
49 
//------------------------------------------------------------------------------
50 
 
51 
//------------------------------------------------------------------------------
52 
/// Configures the pin associated with the given LED number. If the LED does
53 
/// not exist on the board, the function does nothing.
54 
/// \param led  Number of the LED to configure.
55 
/// \return 1 if the LED exists and has been configured; otherwise 0.
56 
//------------------------------------------------------------------------------
57 
unsigned char LED_Configure(unsigned int led)
58 
{
59 
#ifdef PINS_LEDS
60 
    // Check that LED exists
61 
    if (led >= numLeds) {
62 
 
63 
        return 0;
64 
    }
65 
 
66 
    // Configure LED
67 
    return (PIO_Configure(&pinsLeds[led], 1));
68 
#else
69 
    return 0;
70 
#endif
71 
}
72 
 
73 
//------------------------------------------------------------------------------
74 
/// Turns the given LED on if it exists; otherwise does nothing.
75 
/// \param led  Number of the LED to turn on.
76 
/// \return 1 if the LED has been turned on; 0 otherwise.
77 
//------------------------------------------------------------------------------
78 
unsigned char LED_Set(unsigned int led)
79 
{
80 
#ifdef PINS_LEDS
81 
    // Check if LED exists
82 
    if (led >= numLeds) {
83 
 
84 
        return 0;
85 
    }
86 
 
87 
    // Turn LED on
88 
    if (pinsLeds[led].type == PIO_OUTPUT_0) {
89 
 
90 
        PIO_Set(&pinsLeds[led]);
91 
    }
92 
    else {
93 
 
94 
        PIO_Clear(&pinsLeds[led]);
95 
    }
96 
 
97 
    return 1;
98 
#else
99 
    return 0;
100 
#endif
101 
}
102 
 
103 
//------------------------------------------------------------------------------
104 
/// Turns a LED off.
105 
/// \param led  Number of the LED to turn off.
106 
/// \param 1 if the LED has been turned off; 0 otherwise.
107 
//------------------------------------------------------------------------------
108 
unsigned char LED_Clear(unsigned int led)
109 
{
110 
#ifdef PINS_LEDS
111 
    // Check if LED exists
112 
    if (led >= numLeds) {
113 
 
114 
        return 0;
115 
    }
116 
 
117 
    // Turn LED off
118 
    if (pinsLeds[led].type == PIO_OUTPUT_0) {
119 
 
120 
        PIO_Clear(&pinsLeds[led]);
121 
    }
122 
    else {
123 
 
124 
        PIO_Set(&pinsLeds[led]);
125 
    }
126 
 
127 
    return 1;
128 
#else
129 
    return 0;
130 
#endif
131 
}
132 
 
133 
//------------------------------------------------------------------------------
134 
/// Toggles the current state of a LED.
135 
/// \param led  Number of the LED to toggle.
136 
/// \return 1 if the LED has been toggled; otherwise 0.
137 
//------------------------------------------------------------------------------
138 
unsigned char LED_Toggle(unsigned int led)
139 
{
140 
#ifdef PINS_LEDS
141 
    // Check if LED exists
142 
    if (led >= numLeds) {
143 
 
144 
        return 0;
145 
    }
146 
 
147 
    // Toggle LED
148 
    if (PIO_GetOutputDataStatus(&pinsLeds[led])) {
149 
 
150 
        PIO_Clear(&pinsLeds[led]);
151 
    }
152 
    else {
153 
 
154 
        PIO_Set(&pinsLeds[led]);
155 
    }
156 
 
157 
    return 1;
158 
#else
159 
    return 0;
160 
#endif
161 
}
162 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.