URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_LM3S811_IAR/] [LuminaryCode/] [hw_adc.h] - Blame information for rev 728

Go to most recent revision | Details | Compare with Previous | View Log


//*****************************************************************************
//
// hw_adc.h - Macros used when accessing the ADC hardware.
//
// Copyright (c) 2005,2006 Luminary Micro, Inc.  All rights reserved.
//
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's Stellaris Family of microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws.  All rights are reserved.  Any use in violation
// of the foregoing restrictions may subject the user to criminal sanctions
// under applicable laws, as well as to civil liability for the breach of the
// terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 991 of the Stellaris Driver Library.
//
//*****************************************************************************
 
#ifndef __HW_ADC_H__
#define __HW_ADC_H__
 
//*****************************************************************************
//
// The following define the offsets of the ADC registers.
//
//*****************************************************************************
#define ADC_O_ACTSS             0x00000000  // Active sample register
#define ADC_O_RIS               0x00000004  // Raw interrupt status register
#define ADC_O_IM                0x00000008  // Interrupt mask register
#define ADC_O_ISC               0x0000000C  // Interrupt status/clear register
#define ADC_O_OSTAT             0x00000010  // Overflow status register
#define ADC_O_EMUX              0x00000014  // Event multiplexer select reg.
#define ADC_O_USTAT             0x00000018  // Underflow status register
#define ADC_O_SSPRI             0x00000020  // Channel priority register
#define ADC_O_PSSI              0x00000028  // Processor sample initiate reg.
#define ADC_O_SAC               0x00000030  // Sample Averaging Control reg.
#define ADC_O_SSMUX0            0x00000040  // Multiplexer select 0 register
#define ADC_O_SSCTL0            0x00000044  // Sample sequence control 0 reg.
#define ADC_O_SSFIFO0           0x00000048  // Result FIFO 0 register
#define ADC_O_SSFSTAT0          0x0000004C  // FIFO 0 status register
#define ADC_O_SSMUX1            0x00000060  // Multiplexer select 1 register
#define ADC_O_SSCTL1            0x00000064  // Sample sequence control 1 reg.
#define ADC_O_SSFIFO1           0x00000068  // Result FIFO 1 register
#define ADC_O_SSFSTAT1          0x0000006C  // FIFO 1 status register
#define ADC_O_SSMUX2            0x00000080  // Multiplexer select 2 register
#define ADC_O_SSCTL2            0x00000084  // Sample sequence control 2 reg.
#define ADC_O_SSFIFO2           0x00000088  // Result FIFO 2 register
#define ADC_O_SSFSTAT2          0x0000008C  // FIFO 2 status register
#define ADC_O_SSMUX3            0x000000A0  // Multiplexer select 3 register
#define ADC_O_SSCTL3            0x000000A4  // Sample sequence control 3 reg.
#define ADC_O_SSFIFO3           0x000000A8  // Result FIFO 3 register
#define ADC_O_SSFSTAT3          0x000000AC  // FIFO 3 status register
#define ADC_O_TMLB              0x00000100  // Test mode loopback register
 
//*****************************************************************************
//
// The following define the offsets of the ADC sequence registers.
//
//*****************************************************************************
#define ADC_O_SEQ               0x00000040  // Offset to the first sequence
#define ADC_O_SEQ_STEP          0x00000020  // Increment to the next sequence
#define ADC_O_X_SSMUX           0x00000000  // Multiplexer select register
#define ADC_O_X_SSCTL           0x00000004  // Sample sequence control register
#define ADC_O_X_SSFIFO          0x00000008  // Result FIFO register
#define ADC_O_X_SSFSTAT         0x0000000C  // FIFO status register
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_ACTSS register.
//
//*****************************************************************************
#define ADC_ACTSS_ASEN3         0x00000008  // Sample sequence 3 enable
#define ADC_ACTSS_ASEN2         0x00000004  // Sample sequence 2 enable
#define ADC_ACTSS_ASEN1         0x00000002  // Sample sequence 1 enable
#define ADC_ACTSS_ASEN0         0x00000001  // Sample sequence 0 enable
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_RIS register.
//
//*****************************************************************************
#define ADC_RIS_INR3            0x00000008  // Sample sequence 3 interrupt
#define ADC_RIS_INR2            0x00000004  // Sample sequence 2 interrupt
#define ADC_RIS_INR1            0x00000002  // Sample sequence 1 interrupt
#define ADC_RIS_INR0            0x00000001  // Sample sequence 0 interrupt
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_IM register.
//
//*****************************************************************************
#define ADC_IM_MASK3            0x00000008  // Sample sequence 3 mask
#define ADC_IM_MASK2            0x00000004  // Sample sequence 2 mask
#define ADC_IM_MASK1            0x00000002  // Sample sequence 1 mask
#define ADC_IM_MASK0            0x00000001  // Sample sequence 0 mask
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_ISC register.
//
//*****************************************************************************
#define ADC_ISC_IN3             0x00000008 // Sample sequence 3 interrupt
#define ADC_ISC_IN2             0x00000004 // Sample sequence 2 interrupt
#define ADC_ISC_IN1             0x00000002 // Sample sequence 1 interrupt
#define ADC_ISC_IN0             0x00000001 // Sample sequence 0 interrupt
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_OSTAT register.
//
//*****************************************************************************
#define ADC_OSTAT_OV3           0x00000008  // Sample sequence 3 overflow
#define ADC_OSTAT_OV2           0x00000004  // Sample sequence 2 overflow
#define ADC_OSTAT_OV1           0x00000002  // Sample sequence 1 overflow
#define ADC_OSTAT_OV0           0x00000001  // Sample sequence 0 overflow
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_EMUX register.
//
//*****************************************************************************
#define ADC_EMUX_EM3_MASK       0x0000F000  // Event mux 3 mask
#define ADC_EMUX_EM3_PROCESSOR  0x00000000  // Processor event
#define ADC_EMUX_EM3_COMP0      0x00001000  // Analog comparator 0 event
#define ADC_EMUX_EM3_COMP1      0x00002000  // Analog comparator 1 event
#define ADC_EMUX_EM3_COMP2      0x00003000  // Analog comparator 2 event
#define ADC_EMUX_EM3_EXTERNAL   0x00004000  // External event
#define ADC_EMUX_EM3_TIMER      0x00005000  // Timer event
#define ADC_EMUX_EM3_PWM0       0x00006000  // PWM0 event
#define ADC_EMUX_EM3_PWM1       0x00007000  // PWM1 event
#define ADC_EMUX_EM3_PWM2       0x00008000  // PWM2 event
#define ADC_EMUX_EM3_ALWAYS     0x0000F000  // Always event
#define ADC_EMUX_EM2_MASK       0x00000F00  // Event mux 2 mask
#define ADC_EMUX_EM2_PROCESSOR  0x00000000  // Processor event
#define ADC_EMUX_EM2_COMP0      0x00000100  // Analog comparator 0 event
#define ADC_EMUX_EM2_COMP1      0x00000200  // Analog comparator 1 event
#define ADC_EMUX_EM2_COMP2      0x00000300  // Analog comparator 2 event
#define ADC_EMUX_EM2_EXTERNAL   0x00000400  // External event
#define ADC_EMUX_EM2_TIMER      0x00000500  // Timer event
#define ADC_EMUX_EM2_PWM0       0x00000600  // PWM0 event
#define ADC_EMUX_EM2_PWM1       0x00000700  // PWM1 event
#define ADC_EMUX_EM2_PWM2       0x00000800  // PWM2 event
#define ADC_EMUX_EM2_ALWAYS     0x00000F00  // Always event
#define ADC_EMUX_EM1_MASK       0x000000F0  // Event mux 1 mask
#define ADC_EMUX_EM1_PROCESSOR  0x00000000  // Processor event
#define ADC_EMUX_EM1_COMP0      0x00000010  // Analog comparator 0 event
#define ADC_EMUX_EM1_COMP1      0x00000020  // Analog comparator 1 event
#define ADC_EMUX_EM1_COMP2      0x00000030  // Analog comparator 2 event
#define ADC_EMUX_EM1_EXTERNAL   0x00000040  // External event
#define ADC_EMUX_EM1_TIMER      0x00000050  // Timer event
#define ADC_EMUX_EM1_PWM0       0x00000060  // PWM0 event
#define ADC_EMUX_EM1_PWM1       0x00000070  // PWM1 event
#define ADC_EMUX_EM1_PWM2       0x00000080  // PWM2 event
#define ADC_EMUX_EM1_ALWAYS     0x000000F0  // Always event
#define ADC_EMUX_EM0_MASK       0x0000000F  // Event mux 0 mask
#define ADC_EMUX_EM0_PROCESSOR  0x00000000  // Processor event
#define ADC_EMUX_EM0_COMP0      0x00000001  // Analog comparator 0 event
#define ADC_EMUX_EM0_COMP1      0x00000002  // Analog comparator 1 event
#define ADC_EMUX_EM0_COMP2      0x00000003  // Analog comparator 2 event
#define ADC_EMUX_EM0_EXTERNAL   0x00000004  // External event
#define ADC_EMUX_EM0_TIMER      0x00000005  // Timer event
#define ADC_EMUX_EM0_PWM0       0x00000006  // PWM0 event
#define ADC_EMUX_EM0_PWM1       0x00000007  // PWM1 event
#define ADC_EMUX_EM0_PWM2       0x00000008  // PWM2 event
#define ADC_EMUX_EM0_ALWAYS     0x0000000F  // Always event
#define ADC_EMUX_EM0_SHIFT               0  // The shift for the first event
#define ADC_EMUX_EM1_SHIFT               4  // The shift for the second event
#define ADC_EMUX_EM2_SHIFT               8  // The shift for the third event
#define ADC_EMUX_EM3_SHIFT              12  // The shift for the fourth event
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_USTAT register.
//
//*****************************************************************************
#define ADC_USTAT_UV3           0x00000008  // Sample sequence 3 underflow
#define ADC_USTAT_UV2           0x00000004  // Sample sequence 2 underflow
#define ADC_USTAT_UV1           0x00000002  // Sample sequence 1 underflow
#define ADC_USTAT_UV0           0x00000001  // Sample sequence 0 underflow
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_SSPRI register.
//
//*****************************************************************************
#define ADC_SSPRI_SS3_MASK      0x00003000  // Sequencer 3 priority mask
#define ADC_SSPRI_SS3_1ST       0x00000000  // First priority
#define ADC_SSPRI_SS3_2ND       0x00001000  // Second priority
#define ADC_SSPRI_SS3_3RD       0x00002000  // Third priority
#define ADC_SSPRI_SS3_4TH       0x00003000  // Fourth priority
#define ADC_SSPRI_SS2_MASK      0x00000300  // Sequencer 2 priority mask
#define ADC_SSPRI_SS2_1ST       0x00000000  // First priority
#define ADC_SSPRI_SS2_2ND       0x00000100  // Second priority
#define ADC_SSPRI_SS2_3RD       0x00000200  // Third priority
#define ADC_SSPRI_SS2_4TH       0x00000300  // Fourth priority
#define ADC_SSPRI_SS1_MASK      0x00000030  // Sequencer 1 priority mask
#define ADC_SSPRI_SS1_1ST       0x00000000  // First priority
#define ADC_SSPRI_SS1_2ND       0x00000010  // Second priority
#define ADC_SSPRI_SS1_3RD       0x00000020  // Third priority
#define ADC_SSPRI_SS1_4TH       0x00000030  // Fourth priority
#define ADC_SSPRI_SS0_MASK      0x00000003  // Sequencer 0 priority mask
#define ADC_SSPRI_SS0_1ST       0x00000000  // First priority
#define ADC_SSPRI_SS0_2ND       0x00000001  // Second priority
#define ADC_SSPRI_SS0_3RD       0x00000002  // Third priority
#define ADC_SSPRI_SS0_4TH       0x00000003  // Fourth priority
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_PSSI register.
//
//*****************************************************************************
#define ADC_PSSI_SS3            0x00000008  // Trigger sample sequencer 3
#define ADC_PSSI_SS2            0x00000004  // Trigger sample sequencer 2
#define ADC_PSSI_SS1            0x00000002  // Trigger sample sequencer 1
#define ADC_PSSI_SS0            0x00000001  // Trigger sample sequencer 0
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_SAC register.
//
//*****************************************************************************
#define ADC_SAC_AVG_OFF         0x00000000  // No hardware oversampling
#define ADC_SAC_AVG_2X          0x00000001  // 2x hardware oversampling
#define ADC_SAC_AVG_4X          0x00000002  // 4x hardware oversampling
#define ADC_SAC_AVG_8X          0x00000003  // 8x hardware oversampling
#define ADC_SAC_AVG_16X         0x00000004  // 16x hardware oversampling
#define ADC_SAC_AVG_32X         0x00000005  // 32x hardware oversampling
#define ADC_SAC_AVG_64X         0x00000006  // 64x hardware oversampling
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_SSMUX0, ADC_SSMUX1,
// ADC_SSMUX2, and ADC_SSMUX3 registers.  Not all fields are present in all
// registers.
//
//*****************************************************************************
#define ADC_SSMUX_MUX7_MASK     0x70000000  // 8th mux select mask
#define ADC_SSMUX_MUX6_MASK     0x07000000  // 7th mux select mask
#define ADC_SSMUX_MUX5_MASK     0x00700000  // 6th mux select mask
#define ADC_SSMUX_MUX4_MASK     0x00070000  // 5th mux select mask
#define ADC_SSMUX_MUX3_MASK     0x00007000  // 4th mux select mask
#define ADC_SSMUX_MUX2_MASK     0x00000700  // 3rd mux select mask
#define ADC_SSMUX_MUX1_MASK     0x00000070  // 2nd mux select mask
#define ADC_SSMUX_MUX0_MASK     0x00000007  // 1st mux select mask
#define ADC_SSMUX_MUX7_SHIFT    28
#define ADC_SSMUX_MUX6_SHIFT    24
#define ADC_SSMUX_MUX5_SHIFT    20
#define ADC_SSMUX_MUX4_SHIFT    16
#define ADC_SSMUX_MUX3_SHIFT    12
#define ADC_SSMUX_MUX2_SHIFT    8
#define ADC_SSMUX_MUX1_SHIFT    4
#define ADC_SSMUX_MUX0_SHIFT    0
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_SSCTL0, ADC_SSCTL1,
// ADC_SSCTL2, and ADC_SSCTL3 registers.  Not all fields are present in all
// registers.
//
//*****************************************************************************
#define ADC_SSCTL_TS7           0x80000000  // 8th temperature sensor select
#define ADC_SSCTL_IE7           0x40000000  // 8th interrupt enable
#define ADC_SSCTL_END7          0x20000000  // 8th sequence end select
#define ADC_SSCTL_D7            0x10000000  // 8th differential select
#define ADC_SSCTL_TS6           0x08000000  // 7th temperature sensor select
#define ADC_SSCTL_IE6           0x04000000  // 7th interrupt enable
#define ADC_SSCTL_END6          0x02000000  // 7th sequence end select
#define ADC_SSCTL_D6            0x01000000  // 7th differential select
#define ADC_SSCTL_TS5           0x00800000  // 6th temperature sensor select
#define ADC_SSCTL_IE5           0x00400000  // 6th interrupt enable
#define ADC_SSCTL_END5          0x00200000  // 6th sequence end select
#define ADC_SSCTL_D5            0x00100000  // 6th differential select
#define ADC_SSCTL_TS4           0x00080000  // 5th temperature sensor select
#define ADC_SSCTL_IE4           0x00040000  // 5th interrupt enable
#define ADC_SSCTL_END4          0x00020000  // 5th sequence end select
#define ADC_SSCTL_D4            0x00010000  // 5th differential select
#define ADC_SSCTL_TS3           0x00008000  // 4th temperature sensor select
#define ADC_SSCTL_IE3           0x00004000  // 4th interrupt enable
#define ADC_SSCTL_END3          0x00002000  // 4th sequence end select
#define ADC_SSCTL_D3            0x00001000  // 4th differential select
#define ADC_SSCTL_TS2           0x00000800  // 3rd temperature sensor select
#define ADC_SSCTL_IE2           0x00000400  // 3rd interrupt enable
#define ADC_SSCTL_END2          0x00000200  // 3rd sequence end select
#define ADC_SSCTL_D2            0x00000100  // 3rd differential select
#define ADC_SSCTL_TS1           0x00000080  // 2nd temperature sensor select
#define ADC_SSCTL_IE1           0x00000040  // 2nd interrupt enable
#define ADC_SSCTL_END1          0x00000020  // 2nd sequence end select
#define ADC_SSCTL_D1            0x00000010  // 2nd differential select
#define ADC_SSCTL_TS0           0x00000008  // 1st temperature sensor select
#define ADC_SSCTL_IE0           0x00000004  // 1st interrupt enable
#define ADC_SSCTL_END0          0x00000002  // 1st sequence end select
#define ADC_SSCTL_D0            0x00000001  // 1st differential select
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_SSFIFO0, ADC_SSFIFO1,
// ADC_SSFIFO2, and ADC_SSFIFO3 registers.
//
//*****************************************************************************
#define ADC_SSFIFO_DATA_MASK    0x000003FF  // Sample data
#define ADC_SSFIFO_DATA_SHIFT   0
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_SSFSTAT0, ADC_SSFSTAT1,
// ADC_SSFSTAT2, and ADC_SSFSTAT3 registers.
//
//*****************************************************************************
#define ADC_SSFSTAT_FULL        0x00001000  // FIFO is full
#define ADC_SSFSTAT_EMPTY       0x00000100  // FIFO is empty
#define ADC_SSFSTAT_HPTR        0x000000F0  // FIFO head pointer
#define ADC_SSFSTAT_TPTR        0x0000000F  // FIFO tail pointer
 
//*****************************************************************************
//
// The following define the bit fields in the ADC_TMLB register.
//
//*****************************************************************************
#define ADC_TMLB_LB             0x00000001  // Loopback control signals
 
//*****************************************************************************
//
// The following define the bit fields in the loopback ADC data.
//
//*****************************************************************************
#define ADC_LB_CNT_MASK         0x000003C0  // Sample counter mask
#define ADC_LB_CONT             0x00000020  // Continuation sample
#define ADC_LB_DIFF             0x00000010  // Differential sample
#define ADC_LB_TS               0x00000008  // Temperature sensor sample
#define ADC_LB_MUX_MASK         0x00000007  // Input channel number mask
#define ADC_LB_CNT_SHIFT        6           // Sample counter shift
#define ADC_LB_MUX_SHIFT        0           // Input channel number shift
 
#endif // __HW_ADC_H__

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_LM3S811_IAR/] [LuminaryCode/] [hw_adc.h] - Blame information for rev 728

Line No.	Rev	Author	Line
1	581	jeremybenn	`//*****************************************************************************`
2			`//`
3			`// hw_adc.h - Macros used when accessing the ADC hardware.`
4			`//`
5			`// Copyright (c) 2005,2006 Luminary Micro, Inc. All rights reserved.`
6			`//`
7			`// Software License Agreement`
8			`//`
9			`// Luminary Micro, Inc. (LMI) is supplying this software for use solely and`
10			`// exclusively on LMI's Stellaris Family of microcontroller products.`
11			`//`
12			`// The software is owned by LMI and/or its suppliers, and is protected under`
13			`// applicable copyright laws. All rights are reserved. Any use in violation`
14			`// of the foregoing restrictions may subject the user to criminal sanctions`
15			`// under applicable laws, as well as to civil liability for the breach of the`
16			`// terms and conditions of this license.`
17			`//`
18			`// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED`
19			`// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF`
20			`// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.`
21			`// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR`
22			`// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.`
23			`//`
24			`// This is part of revision 991 of the Stellaris Driver Library.`
25			`//`
26			`//*****************************************************************************`
27
28			`#ifndef __HW_ADC_H__`
29			`#define __HW_ADC_H__`
30
31			`//*****************************************************************************`
32			`//`
33			`// The following define the offsets of the ADC registers.`
34			`//`
35			`//*****************************************************************************`
36			`#define ADC_O_ACTSS 0x00000000 // Active sample register`
37			`#define ADC_O_RIS 0x00000004 // Raw interrupt status register`
38			`#define ADC_O_IM 0x00000008 // Interrupt mask register`
39			`#define ADC_O_ISC 0x0000000C // Interrupt status/clear register`
40			`#define ADC_O_OSTAT 0x00000010 // Overflow status register`
41			`#define ADC_O_EMUX 0x00000014 // Event multiplexer select reg.`
42			`#define ADC_O_USTAT 0x00000018 // Underflow status register`
43			`#define ADC_O_SSPRI 0x00000020 // Channel priority register`
44			`#define ADC_O_PSSI 0x00000028 // Processor sample initiate reg.`
45			`#define ADC_O_SAC 0x00000030 // Sample Averaging Control reg.`
46			`#define ADC_O_SSMUX0 0x00000040 // Multiplexer select 0 register`
47			`#define ADC_O_SSCTL0 0x00000044 // Sample sequence control 0 reg.`
48			`#define ADC_O_SSFIFO0 0x00000048 // Result FIFO 0 register`
49			`#define ADC_O_SSFSTAT0 0x0000004C // FIFO 0 status register`
50			`#define ADC_O_SSMUX1 0x00000060 // Multiplexer select 1 register`
51			`#define ADC_O_SSCTL1 0x00000064 // Sample sequence control 1 reg.`
52			`#define ADC_O_SSFIFO1 0x00000068 // Result FIFO 1 register`
53			`#define ADC_O_SSFSTAT1 0x0000006C // FIFO 1 status register`
54			`#define ADC_O_SSMUX2 0x00000080 // Multiplexer select 2 register`
55			`#define ADC_O_SSCTL2 0x00000084 // Sample sequence control 2 reg.`
56			`#define ADC_O_SSFIFO2 0x00000088 // Result FIFO 2 register`
57			`#define ADC_O_SSFSTAT2 0x0000008C // FIFO 2 status register`
58			`#define ADC_O_SSMUX3 0x000000A0 // Multiplexer select 3 register`
59			`#define ADC_O_SSCTL3 0x000000A4 // Sample sequence control 3 reg.`
60			`#define ADC_O_SSFIFO3 0x000000A8 // Result FIFO 3 register`
61			`#define ADC_O_SSFSTAT3 0x000000AC // FIFO 3 status register`
62			`#define ADC_O_TMLB 0x00000100 // Test mode loopback register`
63
64			`//*****************************************************************************`
65			`//`
66			`// The following define the offsets of the ADC sequence registers.`
67			`//`
68			`//*****************************************************************************`
69			`#define ADC_O_SEQ 0x00000040 // Offset to the first sequence`
70			`#define ADC_O_SEQ_STEP 0x00000020 // Increment to the next sequence`
71			`#define ADC_O_X_SSMUX 0x00000000 // Multiplexer select register`
72			`#define ADC_O_X_SSCTL 0x00000004 // Sample sequence control register`
73			`#define ADC_O_X_SSFIFO 0x00000008 // Result FIFO register`
74			`#define ADC_O_X_SSFSTAT 0x0000000C // FIFO status register`
75
76			`//*****************************************************************************`
77			`//`
78			`// The following define the bit fields in the ADC_ACTSS register.`
79			`//`
80			`//*****************************************************************************`
81			`#define ADC_ACTSS_ASEN3 0x00000008 // Sample sequence 3 enable`
82			`#define ADC_ACTSS_ASEN2 0x00000004 // Sample sequence 2 enable`
83			`#define ADC_ACTSS_ASEN1 0x00000002 // Sample sequence 1 enable`
84			`#define ADC_ACTSS_ASEN0 0x00000001 // Sample sequence 0 enable`
85
86			`//*****************************************************************************`
87			`//`
88			`// The following define the bit fields in the ADC_RIS register.`
89			`//`
90			`//*****************************************************************************`
91			`#define ADC_RIS_INR3 0x00000008 // Sample sequence 3 interrupt`
92			`#define ADC_RIS_INR2 0x00000004 // Sample sequence 2 interrupt`
93			`#define ADC_RIS_INR1 0x00000002 // Sample sequence 1 interrupt`
94			`#define ADC_RIS_INR0 0x00000001 // Sample sequence 0 interrupt`
95
96			`//*****************************************************************************`
97			`//`
98			`// The following define the bit fields in the ADC_IM register.`
99			`//`
100			`//*****************************************************************************`
101			`#define ADC_IM_MASK3 0x00000008 // Sample sequence 3 mask`
102			`#define ADC_IM_MASK2 0x00000004 // Sample sequence 2 mask`
103			`#define ADC_IM_MASK1 0x00000002 // Sample sequence 1 mask`
104			`#define ADC_IM_MASK0 0x00000001 // Sample sequence 0 mask`
105
106			`//*****************************************************************************`
107			`//`
108			`// The following define the bit fields in the ADC_ISC register.`
109			`//`
110			`//*****************************************************************************`
111			`#define ADC_ISC_IN3 0x00000008 // Sample sequence 3 interrupt`
112			`#define ADC_ISC_IN2 0x00000004 // Sample sequence 2 interrupt`
113			`#define ADC_ISC_IN1 0x00000002 // Sample sequence 1 interrupt`
114			`#define ADC_ISC_IN0 0x00000001 // Sample sequence 0 interrupt`
115
116			`//*****************************************************************************`
117			`//`
118			`// The following define the bit fields in the ADC_OSTAT register.`
119			`//`
120			`//*****************************************************************************`
121			`#define ADC_OSTAT_OV3 0x00000008 // Sample sequence 3 overflow`
122			`#define ADC_OSTAT_OV2 0x00000004 // Sample sequence 2 overflow`
123			`#define ADC_OSTAT_OV1 0x00000002 // Sample sequence 1 overflow`
124			`#define ADC_OSTAT_OV0 0x00000001 // Sample sequence 0 overflow`
125
126			`//*****************************************************************************`
127			`//`
128			`// The following define the bit fields in the ADC_EMUX register.`
129			`//`
130			`//*****************************************************************************`
131			`#define ADC_EMUX_EM3_MASK 0x0000F000 // Event mux 3 mask`
132			`#define ADC_EMUX_EM3_PROCESSOR 0x00000000 // Processor event`
133			`#define ADC_EMUX_EM3_COMP0 0x00001000 // Analog comparator 0 event`
134			`#define ADC_EMUX_EM3_COMP1 0x00002000 // Analog comparator 1 event`
135			`#define ADC_EMUX_EM3_COMP2 0x00003000 // Analog comparator 2 event`
136			`#define ADC_EMUX_EM3_EXTERNAL 0x00004000 // External event`
137			`#define ADC_EMUX_EM3_TIMER 0x00005000 // Timer event`
138			`#define ADC_EMUX_EM3_PWM0 0x00006000 // PWM0 event`
139			`#define ADC_EMUX_EM3_PWM1 0x00007000 // PWM1 event`
140			`#define ADC_EMUX_EM3_PWM2 0x00008000 // PWM2 event`
141			`#define ADC_EMUX_EM3_ALWAYS 0x0000F000 // Always event`
142			`#define ADC_EMUX_EM2_MASK 0x00000F00 // Event mux 2 mask`
143			`#define ADC_EMUX_EM2_PROCESSOR 0x00000000 // Processor event`
144			`#define ADC_EMUX_EM2_COMP0 0x00000100 // Analog comparator 0 event`
145			`#define ADC_EMUX_EM2_COMP1 0x00000200 // Analog comparator 1 event`
146			`#define ADC_EMUX_EM2_COMP2 0x00000300 // Analog comparator 2 event`
147			`#define ADC_EMUX_EM2_EXTERNAL 0x00000400 // External event`
148			`#define ADC_EMUX_EM2_TIMER 0x00000500 // Timer event`
149			`#define ADC_EMUX_EM2_PWM0 0x00000600 // PWM0 event`
150			`#define ADC_EMUX_EM2_PWM1 0x00000700 // PWM1 event`
151			`#define ADC_EMUX_EM2_PWM2 0x00000800 // PWM2 event`
152			`#define ADC_EMUX_EM2_ALWAYS 0x00000F00 // Always event`
153			`#define ADC_EMUX_EM1_MASK 0x000000F0 // Event mux 1 mask`
154			`#define ADC_EMUX_EM1_PROCESSOR 0x00000000 // Processor event`
155			`#define ADC_EMUX_EM1_COMP0 0x00000010 // Analog comparator 0 event`
156			`#define ADC_EMUX_EM1_COMP1 0x00000020 // Analog comparator 1 event`
157			`#define ADC_EMUX_EM1_COMP2 0x00000030 // Analog comparator 2 event`
158			`#define ADC_EMUX_EM1_EXTERNAL 0x00000040 // External event`
159			`#define ADC_EMUX_EM1_TIMER 0x00000050 // Timer event`
160			`#define ADC_EMUX_EM1_PWM0 0x00000060 // PWM0 event`
161			`#define ADC_EMUX_EM1_PWM1 0x00000070 // PWM1 event`
162			`#define ADC_EMUX_EM1_PWM2 0x00000080 // PWM2 event`
163			`#define ADC_EMUX_EM1_ALWAYS 0x000000F0 // Always event`
164			`#define ADC_EMUX_EM0_MASK 0x0000000F // Event mux 0 mask`
165			`#define ADC_EMUX_EM0_PROCESSOR 0x00000000 // Processor event`
166			`#define ADC_EMUX_EM0_COMP0 0x00000001 // Analog comparator 0 event`
167			`#define ADC_EMUX_EM0_COMP1 0x00000002 // Analog comparator 1 event`
168			`#define ADC_EMUX_EM0_COMP2 0x00000003 // Analog comparator 2 event`
169			`#define ADC_EMUX_EM0_EXTERNAL 0x00000004 // External event`
170			`#define ADC_EMUX_EM0_TIMER 0x00000005 // Timer event`
171			`#define ADC_EMUX_EM0_PWM0 0x00000006 // PWM0 event`
172			`#define ADC_EMUX_EM0_PWM1 0x00000007 // PWM1 event`
173			`#define ADC_EMUX_EM0_PWM2 0x00000008 // PWM2 event`
174			`#define ADC_EMUX_EM0_ALWAYS 0x0000000F // Always event`
175			`#define ADC_EMUX_EM0_SHIFT 0 // The shift for the first event`
176			`#define ADC_EMUX_EM1_SHIFT 4 // The shift for the second event`
177			`#define ADC_EMUX_EM2_SHIFT 8 // The shift for the third event`
178			`#define ADC_EMUX_EM3_SHIFT 12 // The shift for the fourth event`
179
180			`//*****************************************************************************`
181			`//`
182			`// The following define the bit fields in the ADC_USTAT register.`
183			`//`
184			`//*****************************************************************************`
185			`#define ADC_USTAT_UV3 0x00000008 // Sample sequence 3 underflow`
186			`#define ADC_USTAT_UV2 0x00000004 // Sample sequence 2 underflow`
187			`#define ADC_USTAT_UV1 0x00000002 // Sample sequence 1 underflow`
188			`#define ADC_USTAT_UV0 0x00000001 // Sample sequence 0 underflow`
189
190			`//*****************************************************************************`
191			`//`
192			`// The following define the bit fields in the ADC_SSPRI register.`
193			`//`
194			`//*****************************************************************************`
195			`#define ADC_SSPRI_SS3_MASK 0x00003000 // Sequencer 3 priority mask`
196			`#define ADC_SSPRI_SS3_1ST 0x00000000 // First priority`
197			`#define ADC_SSPRI_SS3_2ND 0x00001000 // Second priority`
198			`#define ADC_SSPRI_SS3_3RD 0x00002000 // Third priority`
199			`#define ADC_SSPRI_SS3_4TH 0x00003000 // Fourth priority`
200			`#define ADC_SSPRI_SS2_MASK 0x00000300 // Sequencer 2 priority mask`
201			`#define ADC_SSPRI_SS2_1ST 0x00000000 // First priority`
202			`#define ADC_SSPRI_SS2_2ND 0x00000100 // Second priority`
203			`#define ADC_SSPRI_SS2_3RD 0x00000200 // Third priority`
204			`#define ADC_SSPRI_SS2_4TH 0x00000300 // Fourth priority`
205			`#define ADC_SSPRI_SS1_MASK 0x00000030 // Sequencer 1 priority mask`
206			`#define ADC_SSPRI_SS1_1ST 0x00000000 // First priority`
207			`#define ADC_SSPRI_SS1_2ND 0x00000010 // Second priority`
208			`#define ADC_SSPRI_SS1_3RD 0x00000020 // Third priority`
209			`#define ADC_SSPRI_SS1_4TH 0x00000030 // Fourth priority`
210			`#define ADC_SSPRI_SS0_MASK 0x00000003 // Sequencer 0 priority mask`
211			`#define ADC_SSPRI_SS0_1ST 0x00000000 // First priority`
212			`#define ADC_SSPRI_SS0_2ND 0x00000001 // Second priority`
213			`#define ADC_SSPRI_SS0_3RD 0x00000002 // Third priority`
214			`#define ADC_SSPRI_SS0_4TH 0x00000003 // Fourth priority`
215
216			`//*****************************************************************************`
217			`//`
218			`// The following define the bit fields in the ADC_PSSI register.`
219			`//`
220			`//*****************************************************************************`
221			`#define ADC_PSSI_SS3 0x00000008 // Trigger sample sequencer 3`
222			`#define ADC_PSSI_SS2 0x00000004 // Trigger sample sequencer 2`
223			`#define ADC_PSSI_SS1 0x00000002 // Trigger sample sequencer 1`
224			`#define ADC_PSSI_SS0 0x00000001 // Trigger sample sequencer 0`
225
226			`//*****************************************************************************`
227			`//`
228			`// The following define the bit fields in the ADC_SAC register.`
229			`//`
230			`//*****************************************************************************`
231			`#define ADC_SAC_AVG_OFF 0x00000000 // No hardware oversampling`
232			`#define ADC_SAC_AVG_2X 0x00000001 // 2x hardware oversampling`
233			`#define ADC_SAC_AVG_4X 0x00000002 // 4x hardware oversampling`
234			`#define ADC_SAC_AVG_8X 0x00000003 // 8x hardware oversampling`
235			`#define ADC_SAC_AVG_16X 0x00000004 // 16x hardware oversampling`
236			`#define ADC_SAC_AVG_32X 0x00000005 // 32x hardware oversampling`
237			`#define ADC_SAC_AVG_64X 0x00000006 // 64x hardware oversampling`
238
239			`//*****************************************************************************`
240			`//`
241			`// The following define the bit fields in the ADC_SSMUX0, ADC_SSMUX1,`
242			`// ADC_SSMUX2, and ADC_SSMUX3 registers. Not all fields are present in all`
243			`// registers.`
244			`//`
245			`//*****************************************************************************`
246			`#define ADC_SSMUX_MUX7_MASK 0x70000000 // 8th mux select mask`
247			`#define ADC_SSMUX_MUX6_MASK 0x07000000 // 7th mux select mask`
248			`#define ADC_SSMUX_MUX5_MASK 0x00700000 // 6th mux select mask`
249			`#define ADC_SSMUX_MUX4_MASK 0x00070000 // 5th mux select mask`
250			`#define ADC_SSMUX_MUX3_MASK 0x00007000 // 4th mux select mask`
251			`#define ADC_SSMUX_MUX2_MASK 0x00000700 // 3rd mux select mask`
252			`#define ADC_SSMUX_MUX1_MASK 0x00000070 // 2nd mux select mask`
253			`#define ADC_SSMUX_MUX0_MASK 0x00000007 // 1st mux select mask`
254			`#define ADC_SSMUX_MUX7_SHIFT 28`
255			`#define ADC_SSMUX_MUX6_SHIFT 24`
256			`#define ADC_SSMUX_MUX5_SHIFT 20`
257			`#define ADC_SSMUX_MUX4_SHIFT 16`
258			`#define ADC_SSMUX_MUX3_SHIFT 12`
259			`#define ADC_SSMUX_MUX2_SHIFT 8`
260			`#define ADC_SSMUX_MUX1_SHIFT 4`
261			`#define ADC_SSMUX_MUX0_SHIFT 0`
262
263			`//*****************************************************************************`
264			`//`
265			`// The following define the bit fields in the ADC_SSCTL0, ADC_SSCTL1,`
266			`// ADC_SSCTL2, and ADC_SSCTL3 registers. Not all fields are present in all`
267			`// registers.`
268			`//`
269			`//*****************************************************************************`
270			`#define ADC_SSCTL_TS7 0x80000000 // 8th temperature sensor select`
271			`#define ADC_SSCTL_IE7 0x40000000 // 8th interrupt enable`
272			`#define ADC_SSCTL_END7 0x20000000 // 8th sequence end select`
273			`#define ADC_SSCTL_D7 0x10000000 // 8th differential select`
274			`#define ADC_SSCTL_TS6 0x08000000 // 7th temperature sensor select`
275			`#define ADC_SSCTL_IE6 0x04000000 // 7th interrupt enable`
276			`#define ADC_SSCTL_END6 0x02000000 // 7th sequence end select`
277			`#define ADC_SSCTL_D6 0x01000000 // 7th differential select`
278			`#define ADC_SSCTL_TS5 0x00800000 // 6th temperature sensor select`
279			`#define ADC_SSCTL_IE5 0x00400000 // 6th interrupt enable`
280			`#define ADC_SSCTL_END5 0x00200000 // 6th sequence end select`
281			`#define ADC_SSCTL_D5 0x00100000 // 6th differential select`
282			`#define ADC_SSCTL_TS4 0x00080000 // 5th temperature sensor select`
283			`#define ADC_SSCTL_IE4 0x00040000 // 5th interrupt enable`
284			`#define ADC_SSCTL_END4 0x00020000 // 5th sequence end select`
285			`#define ADC_SSCTL_D4 0x00010000 // 5th differential select`
286			`#define ADC_SSCTL_TS3 0x00008000 // 4th temperature sensor select`
287			`#define ADC_SSCTL_IE3 0x00004000 // 4th interrupt enable`
288			`#define ADC_SSCTL_END3 0x00002000 // 4th sequence end select`
289			`#define ADC_SSCTL_D3 0x00001000 // 4th differential select`
290			`#define ADC_SSCTL_TS2 0x00000800 // 3rd temperature sensor select`
291			`#define ADC_SSCTL_IE2 0x00000400 // 3rd interrupt enable`
292			`#define ADC_SSCTL_END2 0x00000200 // 3rd sequence end select`
293			`#define ADC_SSCTL_D2 0x00000100 // 3rd differential select`
294			`#define ADC_SSCTL_TS1 0x00000080 // 2nd temperature sensor select`
295			`#define ADC_SSCTL_IE1 0x00000040 // 2nd interrupt enable`
296			`#define ADC_SSCTL_END1 0x00000020 // 2nd sequence end select`
297			`#define ADC_SSCTL_D1 0x00000010 // 2nd differential select`
298			`#define ADC_SSCTL_TS0 0x00000008 // 1st temperature sensor select`
299			`#define ADC_SSCTL_IE0 0x00000004 // 1st interrupt enable`
300			`#define ADC_SSCTL_END0 0x00000002 // 1st sequence end select`
301			`#define ADC_SSCTL_D0 0x00000001 // 1st differential select`
302
303			`//*****************************************************************************`
304			`//`
305			`// The following define the bit fields in the ADC_SSFIFO0, ADC_SSFIFO1,`
306			`// ADC_SSFIFO2, and ADC_SSFIFO3 registers.`
307			`//`
308			`//*****************************************************************************`
309			`#define ADC_SSFIFO_DATA_MASK 0x000003FF // Sample data`
310			`#define ADC_SSFIFO_DATA_SHIFT 0`
311
312			`//*****************************************************************************`
313			`//`
314			`// The following define the bit fields in the ADC_SSFSTAT0, ADC_SSFSTAT1,`
315			`// ADC_SSFSTAT2, and ADC_SSFSTAT3 registers.`
316			`//`
317			`//*****************************************************************************`
318			`#define ADC_SSFSTAT_FULL 0x00001000 // FIFO is full`
319			`#define ADC_SSFSTAT_EMPTY 0x00000100 // FIFO is empty`
320			`#define ADC_SSFSTAT_HPTR 0x000000F0 // FIFO head pointer`
321			`#define ADC_SSFSTAT_TPTR 0x0000000F // FIFO tail pointer`
322
323			`//*****************************************************************************`
324			`//`
325			`// The following define the bit fields in the ADC_TMLB register.`
326			`//`
327			`//*****************************************************************************`
328			`#define ADC_TMLB_LB 0x00000001 // Loopback control signals`
329
330			`//*****************************************************************************`
331			`//`
332			`// The following define the bit fields in the loopback ADC data.`
333			`//`
334			`//*****************************************************************************`
335			`#define ADC_LB_CNT_MASK 0x000003C0 // Sample counter mask`
336			`#define ADC_LB_CONT 0x00000020 // Continuation sample`
337			`#define ADC_LB_DIFF 0x00000010 // Differential sample`
338			`#define ADC_LB_TS 0x00000008 // Temperature sensor sample`
339			`#define ADC_LB_MUX_MASK 0x00000007 // Input channel number mask`
340			`#define ADC_LB_CNT_SHIFT 6 // Sample counter shift`
341			`#define ADC_LB_MUX_SHIFT 0 // Input channel number shift`
342
343			`#endif // __HW_ADC_H__`