Subversion Repositories openrisc

//*****************************************************************************

//

// hw_ints.h - Macros that define the interrupt assignment on Stellaris.

//

// Copyright (c) 2005,2006 Luminary Micro, Inc.  All rights reserved.

//

// Software License Agreement

//

// Luminary Micro, Inc. (LMI) is supplying this software for use solely and

// exclusively on LMI's Stellaris Family of microcontroller products.

//

// The software is owned by LMI and/or its suppliers, and is protected under

// applicable copyright laws.  All rights are reserved.  Any use in violation

// of the foregoing restrictions may subject the user to criminal sanctions

// under applicable laws, as well as to civil liability for the breach of the

// terms and conditions of this license.

//

// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED

// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF

// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.

// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR

// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.

//

// This is part of revision 816 of the Stellaris Driver Library.

//

//*****************************************************************************

#ifndef __HW_INTS_H__

#define __HW_INTS_H__

//*****************************************************************************

//

// The following define the fault assignments.

//

//*****************************************************************************

#define FAULT_NMI               2           // NMI fault

#define FAULT_HARD              3           // Hard fault

#define FAULT_MPU               4           // MPU fault

#define FAULT_BUS               5           // Bus fault

#define FAULT_USAGE             6           // Usage fault

#define FAULT_SVCALL            11          // SVCall

#define FAULT_DEBUG             12          // Debug monitor

#define FAULT_PENDSV            14          // PendSV

#define FAULT_SYSTICK           15          // System Tick

//*****************************************************************************

//

// The following define the interrupt assignments.

//

//*****************************************************************************

#define INT_GPIOA               16          // GPIO Port A

#define INT_GPIOB               17          // GPIO Port B

#define INT_GPIOC               18          // GPIO Port C

#define INT_GPIOD               19          // GPIO Port D

#define INT_GPIOE               20          // GPIO Port E

#define INT_UART0               21          // UART0 Rx and Tx

#define INT_UART1               22          // UART1 Rx and Tx

#define INT_SSI                 23          // SSI Rx and Tx

#define INT_I2C                 24          // I2C Master and Slave

#define INT_PWM_FAULT           25          // PWM Fault

#define INT_PWM0                26          // PWM Generator 0

#define INT_PWM1                27          // PWM Generator 1

#define INT_PWM2                28          // PWM Generator 2

#define INT_QEI                 29          // Quadrature Encoder

#define INT_ADC0                30          // ADC Sequence 0

#define INT_ADC1                31          // ADC Sequence 1

#define INT_ADC2                32          // ADC Sequence 2

#define INT_ADC3                33          // ADC Sequence 3

#define INT_WATCHDOG            34          // Watchdog timer

#define INT_TIMER0A             35          // Timer 0 subtimer A

#define INT_TIMER0B             36          // Timer 0 subtimer B

#define INT_TIMER1A             37          // Timer 1 subtimer A

#define INT_TIMER1B             38          // Timer 1 subtimer B

#define INT_TIMER2A             39          // Timer 2 subtimer A

#define INT_TIMER2B             40          // Timer 2 subtimer B

#define INT_COMP0               41          // Analog Comparator 0

#define INT_COMP1               42          // Analog Comparator 1

#define INT_COMP2               43          // Analog Comparator 2

#define INT_SYSCTL              44          // System Control (PLL, OSC, BO)

#define INT_FLASH               45          // FLASH Control

//*****************************************************************************

//

// The total number of interrupts.

//

//*****************************************************************************

#define NUM_INTERRUPTS          46

//*****************************************************************************

//

// The total number of priority levels.

//

//*****************************************************************************

#define NUM_PRIORITY            8

#define NUM_PRIORITY_BITS       3

#endif // __HW_INTS_H__