1 |
582 |
jeremybenn |
/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
|
2 |
|
|
* File Name : stm32f10x_usart.c
|
3 |
|
|
* Author : MCD Application Team
|
4 |
|
|
* Version : V2.0.1
|
5 |
|
|
* Date : 06/13/2008
|
6 |
|
|
* Description : This file provides all the USART firmware functions.
|
7 |
|
|
********************************************************************************
|
8 |
|
|
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
9 |
|
|
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
10 |
|
|
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
11 |
|
|
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
12 |
|
|
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
13 |
|
|
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
14 |
|
|
*******************************************************************************/
|
15 |
|
|
|
16 |
|
|
/* Includes ------------------------------------------------------------------*/
|
17 |
|
|
#include "stm32f10x_usart.h"
|
18 |
|
|
#include "stm32f10x_rcc.h"
|
19 |
|
|
|
20 |
|
|
/* Private typedef -----------------------------------------------------------*/
|
21 |
|
|
/* Private define ------------------------------------------------------------*/
|
22 |
|
|
/* USART UE Mask */
|
23 |
|
|
#define CR1_UE_Set ((u16)0x2000) /* USART Enable Mask */
|
24 |
|
|
#define CR1_UE_Reset ((u16)0xDFFF) /* USART Disable Mask */
|
25 |
|
|
|
26 |
|
|
/* USART WakeUp Method */
|
27 |
|
|
#define CR1_WAKE_Mask ((u16)0xF7FF) /* USART WakeUp Method Mask */
|
28 |
|
|
|
29 |
|
|
/* USART RWU Mask */
|
30 |
|
|
#define CR1_RWU_Set ((u16)0x0002) /* USART mute mode Enable Mask */
|
31 |
|
|
#define CR1_RWU_Reset ((u16)0xFFFD) /* USART mute mode Enable Mask */
|
32 |
|
|
|
33 |
|
|
#define CR1_SBK_Set ((u16)0x0001) /* USART Break Character send Mask */
|
34 |
|
|
|
35 |
|
|
#define CR1_CLEAR_Mask ((u16)0xE9F3) /* USART CR1 Mask */
|
36 |
|
|
|
37 |
|
|
#define CR2_Address_Mask ((u16)0xFFF0) /* USART address Mask */
|
38 |
|
|
|
39 |
|
|
/* USART LIN Mask */
|
40 |
|
|
#define CR2_LINEN_Set ((u16)0x4000) /* USART LIN Enable Mask */
|
41 |
|
|
#define CR2_LINEN_Reset ((u16)0xBFFF) /* USART LIN Disable Mask */
|
42 |
|
|
|
43 |
|
|
/* USART LIN Break detection */
|
44 |
|
|
#define CR2_LBDL_Mask ((u16)0xFFDF) /* USART LIN Break detection Mask */
|
45 |
|
|
|
46 |
|
|
#define CR2_STOP_CLEAR_Mask ((u16)0xCFFF) /* USART CR2 STOP Bits Mask */
|
47 |
|
|
#define CR2_CLOCK_CLEAR_Mask ((u16)0xF0FF) /* USART CR2 Clock Mask */
|
48 |
|
|
|
49 |
|
|
/* USART SC Mask */
|
50 |
|
|
#define CR3_SCEN_Set ((u16)0x0020) /* USART SC Enable Mask */
|
51 |
|
|
#define CR3_SCEN_Reset ((u16)0xFFDF) /* USART SC Disable Mask */
|
52 |
|
|
|
53 |
|
|
/* USART SC NACK Mask */
|
54 |
|
|
#define CR3_NACK_Set ((u16)0x0010) /* USART SC NACK Enable Mask */
|
55 |
|
|
#define CR3_NACK_Reset ((u16)0xFFEF) /* USART SC NACK Disable Mask */
|
56 |
|
|
|
57 |
|
|
/* USART Half-Duplex Mask */
|
58 |
|
|
#define CR3_HDSEL_Set ((u16)0x0008) /* USART Half-Duplex Enable Mask */
|
59 |
|
|
#define CR3_HDSEL_Reset ((u16)0xFFF7) /* USART Half-Duplex Disable Mask */
|
60 |
|
|
|
61 |
|
|
/* USART IrDA Mask */
|
62 |
|
|
#define CR3_IRLP_Mask ((u16)0xFFFB) /* USART IrDA LowPower mode Mask */
|
63 |
|
|
|
64 |
|
|
#define CR3_CLEAR_Mask ((u16)0xFCFF) /* USART CR3 Mask */
|
65 |
|
|
|
66 |
|
|
/* USART IrDA Mask */
|
67 |
|
|
#define CR3_IREN_Set ((u16)0x0002) /* USART IrDA Enable Mask */
|
68 |
|
|
#define CR3_IREN_Reset ((u16)0xFFFD) /* USART IrDA Disable Mask */
|
69 |
|
|
|
70 |
|
|
#define GTPR_LSB_Mask ((u16)0x00FF) /* Guard Time Register LSB Mask */
|
71 |
|
|
#define GTPR_MSB_Mask ((u16)0xFF00) /* Guard Time Register MSB Mask */
|
72 |
|
|
|
73 |
|
|
#define IT_Mask ((u16)0x001F) /* USART Interrupt Mask */
|
74 |
|
|
|
75 |
|
|
/* Private macro -------------------------------------------------------------*/
|
76 |
|
|
/* Private variables ---------------------------------------------------------*/
|
77 |
|
|
/* Private function prototypes -----------------------------------------------*/
|
78 |
|
|
/* Private functions ---------------------------------------------------------*/
|
79 |
|
|
|
80 |
|
|
/*******************************************************************************
|
81 |
|
|
* Function Name : USART_DeInit
|
82 |
|
|
* Description : Deinitializes the USARTx peripheral registers to their
|
83 |
|
|
* default reset values.
|
84 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
85 |
|
|
* This parameter can be one of the following values:
|
86 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
87 |
|
|
* Output : None
|
88 |
|
|
* Return : None
|
89 |
|
|
*******************************************************************************/
|
90 |
|
|
void USART_DeInit(USART_TypeDef* USARTx)
|
91 |
|
|
{
|
92 |
|
|
/* Check the parameters */
|
93 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
94 |
|
|
|
95 |
|
|
switch (*(u32*)&USARTx)
|
96 |
|
|
{
|
97 |
|
|
case USART1_BASE:
|
98 |
|
|
RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);
|
99 |
|
|
RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE);
|
100 |
|
|
break;
|
101 |
|
|
|
102 |
|
|
case USART2_BASE:
|
103 |
|
|
RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE);
|
104 |
|
|
RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE);
|
105 |
|
|
break;
|
106 |
|
|
|
107 |
|
|
case USART3_BASE:
|
108 |
|
|
RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE);
|
109 |
|
|
RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE);
|
110 |
|
|
break;
|
111 |
|
|
|
112 |
|
|
case UART4_BASE:
|
113 |
|
|
RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE);
|
114 |
|
|
RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE);
|
115 |
|
|
break;
|
116 |
|
|
|
117 |
|
|
case UART5_BASE:
|
118 |
|
|
RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE);
|
119 |
|
|
RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE);
|
120 |
|
|
break;
|
121 |
|
|
|
122 |
|
|
default:
|
123 |
|
|
break;
|
124 |
|
|
}
|
125 |
|
|
}
|
126 |
|
|
|
127 |
|
|
/*******************************************************************************
|
128 |
|
|
* Function Name : USART_Init
|
129 |
|
|
* Description : Initializes the USARTx peripheral according to the specified
|
130 |
|
|
* parameters in the USART_InitStruct .
|
131 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
132 |
|
|
* This parameter can be one of the following values:
|
133 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
134 |
|
|
* - USART_InitStruct: pointer to a USART_InitTypeDef structure
|
135 |
|
|
* that contains the configuration information for the
|
136 |
|
|
* specified USART peripheral.
|
137 |
|
|
* Output : None
|
138 |
|
|
* Return : None
|
139 |
|
|
*******************************************************************************/
|
140 |
|
|
void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct)
|
141 |
|
|
{
|
142 |
|
|
u32 tmpreg = 0x00, apbclock = 0x00;
|
143 |
|
|
u32 integerdivider = 0x00;
|
144 |
|
|
u32 fractionaldivider = 0x00;
|
145 |
|
|
u32 usartxbase = 0;
|
146 |
|
|
RCC_ClocksTypeDef RCC_ClocksStatus;
|
147 |
|
|
|
148 |
|
|
/* Check the parameters */
|
149 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
150 |
|
|
assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate));
|
151 |
|
|
assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength));
|
152 |
|
|
assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits));
|
153 |
|
|
assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity));
|
154 |
|
|
assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode));
|
155 |
|
|
assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl));
|
156 |
|
|
/* The hardware flow control is available only for USART1, USART2 and USART3 */
|
157 |
|
|
assert_param(IS_USART_PERIPH_HFC(USARTx, USART_InitStruct->USART_HardwareFlowControl));
|
158 |
|
|
|
159 |
|
|
usartxbase = (*(u32*)&USARTx);
|
160 |
|
|
|
161 |
|
|
/*---------------------------- USART CR2 Configuration -----------------------*/
|
162 |
|
|
tmpreg = USARTx->CR2;
|
163 |
|
|
/* Clear STOP[13:12] bits */
|
164 |
|
|
tmpreg &= CR2_STOP_CLEAR_Mask;
|
165 |
|
|
|
166 |
|
|
/* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/
|
167 |
|
|
/* Set STOP[13:12] bits according to USART_StopBits value */
|
168 |
|
|
tmpreg |= (u32)USART_InitStruct->USART_StopBits;
|
169 |
|
|
|
170 |
|
|
/* Write to USART CR2 */
|
171 |
|
|
USARTx->CR2 = (u16)tmpreg;
|
172 |
|
|
|
173 |
|
|
/*---------------------------- USART CR1 Configuration -----------------------*/
|
174 |
|
|
tmpreg = USARTx->CR1;
|
175 |
|
|
/* Clear M, PCE, PS, TE and RE bits */
|
176 |
|
|
tmpreg &= CR1_CLEAR_Mask;
|
177 |
|
|
|
178 |
|
|
/* Configure the USART Word Length, Parity and mode ----------------------- */
|
179 |
|
|
/* Set the M bits according to USART_WordLength value */
|
180 |
|
|
/* Set PCE and PS bits according to USART_Parity value */
|
181 |
|
|
/* Set TE and RE bits according to USART_Mode value */
|
182 |
|
|
tmpreg |= (u32)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity |
|
183 |
|
|
USART_InitStruct->USART_Mode;
|
184 |
|
|
|
185 |
|
|
/* Write to USART CR1 */
|
186 |
|
|
USARTx->CR1 = (u16)tmpreg;
|
187 |
|
|
|
188 |
|
|
/*---------------------------- USART CR3 Configuration -----------------------*/
|
189 |
|
|
tmpreg = USARTx->CR3;
|
190 |
|
|
/* Clear CTSE and RTSE bits */
|
191 |
|
|
tmpreg &= CR3_CLEAR_Mask;
|
192 |
|
|
|
193 |
|
|
/* Configure the USART HFC -------------------------------------------------*/
|
194 |
|
|
/* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */
|
195 |
|
|
tmpreg |= USART_InitStruct->USART_HardwareFlowControl;
|
196 |
|
|
|
197 |
|
|
/* Write to USART CR3 */
|
198 |
|
|
USARTx->CR3 = (u16)tmpreg;
|
199 |
|
|
|
200 |
|
|
/*---------------------------- USART BRR Configuration -----------------------*/
|
201 |
|
|
/* Configure the USART Baud Rate -------------------------------------------*/
|
202 |
|
|
RCC_GetClocksFreq(&RCC_ClocksStatus);
|
203 |
|
|
if (usartxbase == USART1_BASE)
|
204 |
|
|
{
|
205 |
|
|
apbclock = RCC_ClocksStatus.PCLK2_Frequency;
|
206 |
|
|
}
|
207 |
|
|
else
|
208 |
|
|
{
|
209 |
|
|
apbclock = RCC_ClocksStatus.PCLK1_Frequency;
|
210 |
|
|
}
|
211 |
|
|
|
212 |
|
|
/* Determine the integer part */
|
213 |
|
|
integerdivider = ((0x19 * apbclock) / (0x04 * (USART_InitStruct->USART_BaudRate)));
|
214 |
|
|
tmpreg = (integerdivider / 0x64) << 0x04;
|
215 |
|
|
|
216 |
|
|
/* Determine the fractional part */
|
217 |
|
|
fractionaldivider = integerdivider - (0x64 * (tmpreg >> 0x04));
|
218 |
|
|
tmpreg |= ((((fractionaldivider * 0x10) + 0x32) / 0x64)) & ((u8)0x0F);
|
219 |
|
|
|
220 |
|
|
/* Write to USART BRR */
|
221 |
|
|
USARTx->BRR = (u16)tmpreg;
|
222 |
|
|
}
|
223 |
|
|
|
224 |
|
|
/*******************************************************************************
|
225 |
|
|
* Function Name : USART_StructInit
|
226 |
|
|
* Description : Fills each USART_InitStruct member with its default value.
|
227 |
|
|
* Input : - USART_InitStruct: pointer to a USART_InitTypeDef structure
|
228 |
|
|
* which will be initialized.
|
229 |
|
|
* Output : None
|
230 |
|
|
* Return : None
|
231 |
|
|
*******************************************************************************/
|
232 |
|
|
void USART_StructInit(USART_InitTypeDef* USART_InitStruct)
|
233 |
|
|
{
|
234 |
|
|
/* USART_InitStruct members default value */
|
235 |
|
|
USART_InitStruct->USART_BaudRate = 9600;
|
236 |
|
|
USART_InitStruct->USART_WordLength = USART_WordLength_8b;
|
237 |
|
|
USART_InitStruct->USART_StopBits = USART_StopBits_1;
|
238 |
|
|
USART_InitStruct->USART_Parity = USART_Parity_No ;
|
239 |
|
|
USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
|
240 |
|
|
USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
241 |
|
|
}
|
242 |
|
|
|
243 |
|
|
/*******************************************************************************
|
244 |
|
|
* Function Name : USART_ClockInit
|
245 |
|
|
* Description : Initializes the USARTx peripheral Clock according to the
|
246 |
|
|
* specified parameters in the USART_ClockInitStruct .
|
247 |
|
|
* Input : - USARTx: where x can be 1, 2, 3 to select the USART peripheral.
|
248 |
|
|
* Note: The Smart Card mode is not available for UART4 and UART5.
|
249 |
|
|
* - USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
|
250 |
|
|
* structure that contains the configuration information for
|
251 |
|
|
* the specified USART peripheral.
|
252 |
|
|
* Output : None
|
253 |
|
|
* Return : None
|
254 |
|
|
*******************************************************************************/
|
255 |
|
|
void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct)
|
256 |
|
|
{
|
257 |
|
|
u32 tmpreg = 0x00;
|
258 |
|
|
|
259 |
|
|
/* Check the parameters */
|
260 |
|
|
assert_param(IS_USART_123_PERIPH(USARTx));
|
261 |
|
|
assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock));
|
262 |
|
|
assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL));
|
263 |
|
|
assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA));
|
264 |
|
|
assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit));
|
265 |
|
|
|
266 |
|
|
/*---------------------------- USART CR2 Configuration -----------------------*/
|
267 |
|
|
tmpreg = USARTx->CR2;
|
268 |
|
|
/* Clear CLKEN, CPOL, CPHA and LBCL bits */
|
269 |
|
|
tmpreg &= CR2_CLOCK_CLEAR_Mask;
|
270 |
|
|
|
271 |
|
|
/* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/
|
272 |
|
|
/* Set CLKEN bit according to USART_Clock value */
|
273 |
|
|
/* Set CPOL bit according to USART_CPOL value */
|
274 |
|
|
/* Set CPHA bit according to USART_CPHA value */
|
275 |
|
|
/* Set LBCL bit according to USART_LastBit value */
|
276 |
|
|
tmpreg |= (u32)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL |
|
277 |
|
|
USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit;
|
278 |
|
|
|
279 |
|
|
/* Write to USART CR2 */
|
280 |
|
|
USARTx->CR2 = (u16)tmpreg;
|
281 |
|
|
}
|
282 |
|
|
|
283 |
|
|
/*******************************************************************************
|
284 |
|
|
* Function Name : USART_ClockStructInit
|
285 |
|
|
* Description : Fills each USART_ClockInitStruct member with its default value.
|
286 |
|
|
* Input : - USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
|
287 |
|
|
* structure which will be initialized.
|
288 |
|
|
* Output : None
|
289 |
|
|
* Return : None
|
290 |
|
|
*******************************************************************************/
|
291 |
|
|
void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct)
|
292 |
|
|
{
|
293 |
|
|
/* USART_ClockInitStruct members default value */
|
294 |
|
|
USART_ClockInitStruct->USART_Clock = USART_Clock_Disable;
|
295 |
|
|
USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low;
|
296 |
|
|
USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge;
|
297 |
|
|
USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable;
|
298 |
|
|
}
|
299 |
|
|
|
300 |
|
|
/*******************************************************************************
|
301 |
|
|
* Function Name : USART_Cmd
|
302 |
|
|
* Description : Enables or disables the specified USART peripheral.
|
303 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
304 |
|
|
* This parameter can be one of the following values:
|
305 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
306 |
|
|
* : - NewState: new state of the USARTx peripheral.
|
307 |
|
|
* This parameter can be: ENABLE or DISABLE.
|
308 |
|
|
* Output : None
|
309 |
|
|
* Return : None
|
310 |
|
|
*******************************************************************************/
|
311 |
|
|
void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
|
312 |
|
|
{
|
313 |
|
|
/* Check the parameters */
|
314 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
315 |
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
316 |
|
|
|
317 |
|
|
if (NewState != DISABLE)
|
318 |
|
|
{
|
319 |
|
|
/* Enable the selected USART by setting the UE bit in the CR1 register */
|
320 |
|
|
USARTx->CR1 |= CR1_UE_Set;
|
321 |
|
|
}
|
322 |
|
|
else
|
323 |
|
|
{
|
324 |
|
|
/* Disable the selected USART by clearing the UE bit in the CR1 register */
|
325 |
|
|
USARTx->CR1 &= CR1_UE_Reset;
|
326 |
|
|
}
|
327 |
|
|
}
|
328 |
|
|
|
329 |
|
|
/*******************************************************************************
|
330 |
|
|
* Function Name : USART_ITConfig
|
331 |
|
|
* Description : Enables or disables the specified USART interrupts.
|
332 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
333 |
|
|
* This parameter can be one of the following values:
|
334 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
335 |
|
|
* - USART_IT: specifies the USART interrupt sources to be
|
336 |
|
|
* enabled or disabled.
|
337 |
|
|
* This parameter can be one of the following values:
|
338 |
|
|
* - USART_IT_CTS: CTS change interrupt (not available for
|
339 |
|
|
* UART4 and UART5)
|
340 |
|
|
* - USART_IT_LBD: LIN Break detection interrupt
|
341 |
|
|
* - USART_IT_TXE: Tansmit Data Register empty interrupt
|
342 |
|
|
* - USART_IT_TC: Transmission complete interrupt
|
343 |
|
|
* - USART_IT_RXNE: Receive Data register not empty
|
344 |
|
|
* interrupt
|
345 |
|
|
* - USART_IT_IDLE: Idle line detection interrupt
|
346 |
|
|
* - USART_IT_PE: Parity Error interrupt
|
347 |
|
|
* - USART_IT_ERR: Error interrupt(Frame error, noise
|
348 |
|
|
* error, overrun error)
|
349 |
|
|
* - NewState: new state of the specified USARTx interrupts.
|
350 |
|
|
* This parameter can be: ENABLE or DISABLE.
|
351 |
|
|
* Output : None
|
352 |
|
|
* Return : None
|
353 |
|
|
*******************************************************************************/
|
354 |
|
|
void USART_ITConfig(USART_TypeDef* USARTx, u16 USART_IT, FunctionalState NewState)
|
355 |
|
|
{
|
356 |
|
|
u32 usartreg = 0x00, itpos = 0x00, itmask = 0x00;
|
357 |
|
|
u32 usartxbase = 0x00;
|
358 |
|
|
|
359 |
|
|
/* Check the parameters */
|
360 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
361 |
|
|
assert_param(IS_USART_CONFIG_IT(USART_IT));
|
362 |
|
|
assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */
|
363 |
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
364 |
|
|
|
365 |
|
|
usartxbase = (*(u32*)&(USARTx));
|
366 |
|
|
|
367 |
|
|
/* Get the USART register index */
|
368 |
|
|
usartreg = (((u8)USART_IT) >> 0x05);
|
369 |
|
|
|
370 |
|
|
/* Get the interrupt position */
|
371 |
|
|
itpos = USART_IT & IT_Mask;
|
372 |
|
|
|
373 |
|
|
itmask = (((u32)0x01) << itpos);
|
374 |
|
|
|
375 |
|
|
if (usartreg == 0x01) /* The IT is in CR1 register */
|
376 |
|
|
{
|
377 |
|
|
usartxbase += 0x0C;
|
378 |
|
|
}
|
379 |
|
|
else if (usartreg == 0x02) /* The IT is in CR2 register */
|
380 |
|
|
{
|
381 |
|
|
usartxbase += 0x10;
|
382 |
|
|
}
|
383 |
|
|
else /* The IT is in CR3 register */
|
384 |
|
|
{
|
385 |
|
|
usartxbase += 0x14;
|
386 |
|
|
}
|
387 |
|
|
if (NewState != DISABLE)
|
388 |
|
|
{
|
389 |
|
|
*(vu32*)usartxbase |= itmask;
|
390 |
|
|
}
|
391 |
|
|
else
|
392 |
|
|
{
|
393 |
|
|
*(vu32*)usartxbase &= ~itmask;
|
394 |
|
|
}
|
395 |
|
|
}
|
396 |
|
|
|
397 |
|
|
/*******************************************************************************
|
398 |
|
|
* Function Name : USART_DMACmd
|
399 |
|
|
* Description : Enables or disables the USART’s DMA interface.
|
400 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
401 |
|
|
* This parameter can be one of the following values:
|
402 |
|
|
* - USART1, USART2, USART3 or UART4.
|
403 |
|
|
* Note: The DMA mode is not available for UART5.
|
404 |
|
|
* - USART_DMAReq: specifies the DMA request.
|
405 |
|
|
* This parameter can be any combination of the following values:
|
406 |
|
|
* - USART_DMAReq_Tx: USART DMA transmit request
|
407 |
|
|
* - USART_DMAReq_Rx: USART DMA receive request
|
408 |
|
|
* - NewState: new state of the DMA Request sources.
|
409 |
|
|
* This parameter can be: ENABLE or DISABLE.
|
410 |
|
|
* Output : None
|
411 |
|
|
* Return : None
|
412 |
|
|
*******************************************************************************/
|
413 |
|
|
void USART_DMACmd(USART_TypeDef* USARTx, u16 USART_DMAReq, FunctionalState NewState)
|
414 |
|
|
{
|
415 |
|
|
/* Check the parameters */
|
416 |
|
|
assert_param(IS_USART_1234_PERIPH(USARTx));
|
417 |
|
|
assert_param(IS_USART_DMAREQ(USART_DMAReq));
|
418 |
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
419 |
|
|
|
420 |
|
|
if (NewState != DISABLE)
|
421 |
|
|
{
|
422 |
|
|
/* Enable the DMA transfer for selected requests by setting the DMAT and/or
|
423 |
|
|
DMAR bits in the USART CR3 register */
|
424 |
|
|
USARTx->CR3 |= USART_DMAReq;
|
425 |
|
|
}
|
426 |
|
|
else
|
427 |
|
|
{
|
428 |
|
|
/* Disable the DMA transfer for selected requests by clearing the DMAT and/or
|
429 |
|
|
DMAR bits in the USART CR3 register */
|
430 |
|
|
USARTx->CR3 &= (u16)~USART_DMAReq;
|
431 |
|
|
}
|
432 |
|
|
}
|
433 |
|
|
|
434 |
|
|
/*******************************************************************************
|
435 |
|
|
* Function Name : USART_SetAddress
|
436 |
|
|
* Description : Sets the address of the USART node.
|
437 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
438 |
|
|
* This parameter can be one of the following values:
|
439 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
440 |
|
|
* - USART_Address: Indicates the address of the USART node.
|
441 |
|
|
* Output : None
|
442 |
|
|
* Return : None
|
443 |
|
|
*******************************************************************************/
|
444 |
|
|
void USART_SetAddress(USART_TypeDef* USARTx, u8 USART_Address)
|
445 |
|
|
{
|
446 |
|
|
/* Check the parameters */
|
447 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
448 |
|
|
assert_param(IS_USART_ADDRESS(USART_Address));
|
449 |
|
|
|
450 |
|
|
/* Clear the USART address */
|
451 |
|
|
USARTx->CR2 &= CR2_Address_Mask;
|
452 |
|
|
/* Set the USART address node */
|
453 |
|
|
USARTx->CR2 |= USART_Address;
|
454 |
|
|
}
|
455 |
|
|
|
456 |
|
|
/*******************************************************************************
|
457 |
|
|
* Function Name : USART_WakeUpConfig
|
458 |
|
|
* Description : Selects the USART WakeUp method.
|
459 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
460 |
|
|
* This parameter can be one of the following values:
|
461 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
462 |
|
|
* - USART_WakeUp: specifies the USART wakeup method.
|
463 |
|
|
* This parameter can be one of the following values:
|
464 |
|
|
* - USART_WakeUp_IdleLine: WakeUp by an idle line detection
|
465 |
|
|
* - USART_WakeUp_AddressMark: WakeUp by an address mark
|
466 |
|
|
* Output : None
|
467 |
|
|
* Return : None
|
468 |
|
|
*******************************************************************************/
|
469 |
|
|
void USART_WakeUpConfig(USART_TypeDef* USARTx, u16 USART_WakeUp)
|
470 |
|
|
{
|
471 |
|
|
/* Check the parameters */
|
472 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
473 |
|
|
assert_param(IS_USART_WAKEUP(USART_WakeUp));
|
474 |
|
|
|
475 |
|
|
USARTx->CR1 &= CR1_WAKE_Mask;
|
476 |
|
|
USARTx->CR1 |= USART_WakeUp;
|
477 |
|
|
}
|
478 |
|
|
|
479 |
|
|
/*******************************************************************************
|
480 |
|
|
* Function Name : USART_ReceiverWakeUpCmd
|
481 |
|
|
* Description : Determines if the USART is in mute mode or not.
|
482 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
483 |
|
|
* This parameter can be one of the following values:
|
484 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
485 |
|
|
* - NewState: new state of the USART mute mode.
|
486 |
|
|
* This parameter can be: ENABLE or DISABLE.
|
487 |
|
|
* Output : None
|
488 |
|
|
* Return : None
|
489 |
|
|
*******************************************************************************/
|
490 |
|
|
void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState)
|
491 |
|
|
{
|
492 |
|
|
/* Check the parameters */
|
493 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
494 |
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
495 |
|
|
|
496 |
|
|
if (NewState != DISABLE)
|
497 |
|
|
{
|
498 |
|
|
/* Enable the USART mute mode by setting the RWU bit in the CR1 register */
|
499 |
|
|
USARTx->CR1 |= CR1_RWU_Set;
|
500 |
|
|
}
|
501 |
|
|
else
|
502 |
|
|
{
|
503 |
|
|
/* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
|
504 |
|
|
USARTx->CR1 &= CR1_RWU_Reset;
|
505 |
|
|
}
|
506 |
|
|
}
|
507 |
|
|
|
508 |
|
|
/*******************************************************************************
|
509 |
|
|
* Function Name : USART_LINBreakDetectLengthConfig
|
510 |
|
|
* Description : Sets the USART LIN Break detection length.
|
511 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
512 |
|
|
* This parameter can be one of the following values:
|
513 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
514 |
|
|
* - USART_LINBreakDetectLength: specifies the LIN break
|
515 |
|
|
* detection length.
|
516 |
|
|
* This parameter can be one of the following values:
|
517 |
|
|
* - USART_LINBreakDetectLength_10b: 10-bit break detection
|
518 |
|
|
* - USART_LINBreakDetectLength_11b: 11-bit break detection
|
519 |
|
|
* Output : None
|
520 |
|
|
* Return : None
|
521 |
|
|
*******************************************************************************/
|
522 |
|
|
void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, u16 USART_LINBreakDetectLength)
|
523 |
|
|
{
|
524 |
|
|
/* Check the parameters */
|
525 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
526 |
|
|
assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength));
|
527 |
|
|
|
528 |
|
|
USARTx->CR2 &= CR2_LBDL_Mask;
|
529 |
|
|
USARTx->CR2 |= USART_LINBreakDetectLength;
|
530 |
|
|
}
|
531 |
|
|
|
532 |
|
|
/*******************************************************************************
|
533 |
|
|
* Function Name : USART_LINCmd
|
534 |
|
|
* Description : Enables or disables the USART’s LIN mode.
|
535 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
536 |
|
|
* This parameter can be one of the following values:
|
537 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
538 |
|
|
* - NewState: new state of the USART LIN mode.
|
539 |
|
|
* This parameter can be: ENABLE or DISABLE.
|
540 |
|
|
* Output : None
|
541 |
|
|
* Return : None
|
542 |
|
|
*******************************************************************************/
|
543 |
|
|
void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState)
|
544 |
|
|
{
|
545 |
|
|
/* Check the parameters */
|
546 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
547 |
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
548 |
|
|
|
549 |
|
|
if (NewState != DISABLE)
|
550 |
|
|
{
|
551 |
|
|
/* Enable the LIN mode by setting the LINEN bit in the CR2 register */
|
552 |
|
|
USARTx->CR2 |= CR2_LINEN_Set;
|
553 |
|
|
}
|
554 |
|
|
else
|
555 |
|
|
{
|
556 |
|
|
/* Disable the LIN mode by clearing the LINEN bit in the CR2 register */
|
557 |
|
|
USARTx->CR2 &= CR2_LINEN_Reset;
|
558 |
|
|
}
|
559 |
|
|
}
|
560 |
|
|
|
561 |
|
|
/*******************************************************************************
|
562 |
|
|
* Function Name : USART_SendData
|
563 |
|
|
* Description : Transmits single data through the USARTx peripheral.
|
564 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
565 |
|
|
* This parameter can be one of the following values:
|
566 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
567 |
|
|
* - Data: the data to transmit.
|
568 |
|
|
* Output : None
|
569 |
|
|
* Return : None
|
570 |
|
|
*******************************************************************************/
|
571 |
|
|
void USART_SendData(USART_TypeDef* USARTx, u16 Data)
|
572 |
|
|
{
|
573 |
|
|
/* Check the parameters */
|
574 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
575 |
|
|
assert_param(IS_USART_DATA(Data));
|
576 |
|
|
|
577 |
|
|
/* Transmit Data */
|
578 |
|
|
USARTx->DR = (Data & (u16)0x01FF);
|
579 |
|
|
}
|
580 |
|
|
|
581 |
|
|
/*******************************************************************************
|
582 |
|
|
* Function Name : USART_ReceiveData
|
583 |
|
|
* Description : Returns the most recent received data by the USARTx peripheral.
|
584 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
585 |
|
|
* This parameter can be one of the following values:
|
586 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
587 |
|
|
* Output : None
|
588 |
|
|
* Return : The received data.
|
589 |
|
|
*******************************************************************************/
|
590 |
|
|
u16 USART_ReceiveData(USART_TypeDef* USARTx)
|
591 |
|
|
{
|
592 |
|
|
/* Check the parameters */
|
593 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
594 |
|
|
|
595 |
|
|
/* Receive Data */
|
596 |
|
|
return (u16)(USARTx->DR & (u16)0x01FF);
|
597 |
|
|
}
|
598 |
|
|
|
599 |
|
|
/*******************************************************************************
|
600 |
|
|
* Function Name : USART_SendBreak
|
601 |
|
|
* Description : Transmits break characters.
|
602 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
603 |
|
|
* This parameter can be one of the following values:
|
604 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
605 |
|
|
* Output : None
|
606 |
|
|
* Return : None
|
607 |
|
|
*******************************************************************************/
|
608 |
|
|
void USART_SendBreak(USART_TypeDef* USARTx)
|
609 |
|
|
{
|
610 |
|
|
/* Check the parameters */
|
611 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
612 |
|
|
|
613 |
|
|
/* Send break characters */
|
614 |
|
|
USARTx->CR1 |= CR1_SBK_Set;
|
615 |
|
|
}
|
616 |
|
|
|
617 |
|
|
/*******************************************************************************
|
618 |
|
|
* Function Name : USART_SetGuardTime
|
619 |
|
|
* Description : Sets the specified USART guard time.
|
620 |
|
|
* Input : - USARTx: where x can be 1, 2 or 3 to select the USART
|
621 |
|
|
* peripheral.
|
622 |
|
|
* Note: The guard time bits are not available for UART4 and UART5.
|
623 |
|
|
* - USART_GuardTime: specifies the guard time.
|
624 |
|
|
* Output : None
|
625 |
|
|
* Return : None
|
626 |
|
|
*******************************************************************************/
|
627 |
|
|
void USART_SetGuardTime(USART_TypeDef* USARTx, u8 USART_GuardTime)
|
628 |
|
|
{
|
629 |
|
|
/* Check the parameters */
|
630 |
|
|
assert_param(IS_USART_123_PERIPH(USARTx));
|
631 |
|
|
|
632 |
|
|
/* Clear the USART Guard time */
|
633 |
|
|
USARTx->GTPR &= GTPR_LSB_Mask;
|
634 |
|
|
/* Set the USART guard time */
|
635 |
|
|
USARTx->GTPR |= (u16)((u16)USART_GuardTime << 0x08);
|
636 |
|
|
}
|
637 |
|
|
|
638 |
|
|
/*******************************************************************************
|
639 |
|
|
* Function Name : USART_SetPrescaler
|
640 |
|
|
* Description : Sets the system clock prescaler.
|
641 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
642 |
|
|
* This parameter can be one of the following values:
|
643 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
644 |
|
|
* Note: The function is used for IrDA mode with UART4 and UART5.
|
645 |
|
|
* - USART_Prescaler: specifies the prescaler clock.
|
646 |
|
|
* Output : None
|
647 |
|
|
* Return : None
|
648 |
|
|
*******************************************************************************/
|
649 |
|
|
void USART_SetPrescaler(USART_TypeDef* USARTx, u8 USART_Prescaler)
|
650 |
|
|
{
|
651 |
|
|
/* Check the parameters */
|
652 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
653 |
|
|
|
654 |
|
|
/* Clear the USART prescaler */
|
655 |
|
|
USARTx->GTPR &= GTPR_MSB_Mask;
|
656 |
|
|
/* Set the USART prescaler */
|
657 |
|
|
USARTx->GTPR |= USART_Prescaler;
|
658 |
|
|
}
|
659 |
|
|
|
660 |
|
|
/*******************************************************************************
|
661 |
|
|
* Function Name : USART_SmartCardCmd
|
662 |
|
|
* Description : Enables or disables the USART’s Smart Card mode.
|
663 |
|
|
* Input : - USARTx: where x can be 1, 2 or 3 to select the USART
|
664 |
|
|
* peripheral.
|
665 |
|
|
* Note: The Smart Card mode is not available for UART4 and UART5.
|
666 |
|
|
* - NewState: new state of the Smart Card mode.
|
667 |
|
|
* This parameter can be: ENABLE or DISABLE.
|
668 |
|
|
* Output : None
|
669 |
|
|
* Return : None
|
670 |
|
|
*******************************************************************************/
|
671 |
|
|
void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState)
|
672 |
|
|
{
|
673 |
|
|
/* Check the parameters */
|
674 |
|
|
assert_param(IS_USART_123_PERIPH(USARTx));
|
675 |
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
676 |
|
|
|
677 |
|
|
if (NewState != DISABLE)
|
678 |
|
|
{
|
679 |
|
|
/* Enable the SC mode by setting the SCEN bit in the CR3 register */
|
680 |
|
|
USARTx->CR3 |= CR3_SCEN_Set;
|
681 |
|
|
}
|
682 |
|
|
else
|
683 |
|
|
{
|
684 |
|
|
/* Disable the SC mode by clearing the SCEN bit in the CR3 register */
|
685 |
|
|
USARTx->CR3 &= CR3_SCEN_Reset;
|
686 |
|
|
}
|
687 |
|
|
}
|
688 |
|
|
|
689 |
|
|
/*******************************************************************************
|
690 |
|
|
* Function Name : USART_SmartCardNACKCmd
|
691 |
|
|
* Description : Enables or disables NACK transmission.
|
692 |
|
|
* Input : - USARTx: where x can be 1, 2 or 3 to select the USART
|
693 |
|
|
* peripheral.
|
694 |
|
|
* Note: The Smart Card mode is not available for UART4 and UART5.
|
695 |
|
|
* - NewState: new state of the NACK transmission.
|
696 |
|
|
* This parameter can be: ENABLE or DISABLE.
|
697 |
|
|
* Output : None
|
698 |
|
|
* Return : None
|
699 |
|
|
*******************************************************************************/
|
700 |
|
|
void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState)
|
701 |
|
|
{
|
702 |
|
|
/* Check the parameters */
|
703 |
|
|
assert_param(IS_USART_123_PERIPH(USARTx));
|
704 |
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
705 |
|
|
|
706 |
|
|
if (NewState != DISABLE)
|
707 |
|
|
{
|
708 |
|
|
/* Enable the NACK transmission by setting the NACK bit in the CR3 register */
|
709 |
|
|
USARTx->CR3 |= CR3_NACK_Set;
|
710 |
|
|
}
|
711 |
|
|
else
|
712 |
|
|
{
|
713 |
|
|
/* Disable the NACK transmission by clearing the NACK bit in the CR3 register */
|
714 |
|
|
USARTx->CR3 &= CR3_NACK_Reset;
|
715 |
|
|
}
|
716 |
|
|
}
|
717 |
|
|
|
718 |
|
|
/*******************************************************************************
|
719 |
|
|
* Function Name : USART_HalfDuplexCmd
|
720 |
|
|
* Description : Enables or disables the USART’s Half Duplex communication.
|
721 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
722 |
|
|
* This parameter can be one of the following values:
|
723 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
724 |
|
|
* - NewState: new state of the USART Communication.
|
725 |
|
|
* This parameter can be: ENABLE or DISABLE.
|
726 |
|
|
* Output : None
|
727 |
|
|
* Return : None
|
728 |
|
|
*******************************************************************************/
|
729 |
|
|
void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState)
|
730 |
|
|
{
|
731 |
|
|
/* Check the parameters */
|
732 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
733 |
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
734 |
|
|
|
735 |
|
|
if (NewState != DISABLE)
|
736 |
|
|
{
|
737 |
|
|
/* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
|
738 |
|
|
USARTx->CR3 |= CR3_HDSEL_Set;
|
739 |
|
|
}
|
740 |
|
|
else
|
741 |
|
|
{
|
742 |
|
|
/* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */
|
743 |
|
|
USARTx->CR3 &= CR3_HDSEL_Reset;
|
744 |
|
|
}
|
745 |
|
|
}
|
746 |
|
|
|
747 |
|
|
/*******************************************************************************
|
748 |
|
|
* Function Name : USART_IrDAConfig
|
749 |
|
|
* Description : Configures the USART’s IrDA interface.
|
750 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
751 |
|
|
* This parameter can be one of the following values:
|
752 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
753 |
|
|
* - USART_IrDAMode: specifies the IrDA mode.
|
754 |
|
|
* This parameter can be one of the following values:
|
755 |
|
|
* - USART_IrDAMode_LowPower
|
756 |
|
|
* - USART_IrDAMode_Normal
|
757 |
|
|
* Output : None
|
758 |
|
|
* Return : None
|
759 |
|
|
*******************************************************************************/
|
760 |
|
|
void USART_IrDAConfig(USART_TypeDef* USARTx, u16 USART_IrDAMode)
|
761 |
|
|
{
|
762 |
|
|
/* Check the parameters */
|
763 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
764 |
|
|
assert_param(IS_USART_IRDA_MODE(USART_IrDAMode));
|
765 |
|
|
|
766 |
|
|
USARTx->CR3 &= CR3_IRLP_Mask;
|
767 |
|
|
USARTx->CR3 |= USART_IrDAMode;
|
768 |
|
|
}
|
769 |
|
|
|
770 |
|
|
/*******************************************************************************
|
771 |
|
|
* Function Name : USART_IrDACmd
|
772 |
|
|
* Description : Enables or disables the USART’s IrDA interface.
|
773 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
774 |
|
|
* This parameter can be one of the following values:
|
775 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
776 |
|
|
* - NewState: new state of the IrDA mode.
|
777 |
|
|
* This parameter can be: ENABLE or DISABLE.
|
778 |
|
|
* Output : None
|
779 |
|
|
* Return : None
|
780 |
|
|
*******************************************************************************/
|
781 |
|
|
void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState)
|
782 |
|
|
{
|
783 |
|
|
/* Check the parameters */
|
784 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
785 |
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
786 |
|
|
|
787 |
|
|
if (NewState != DISABLE)
|
788 |
|
|
{
|
789 |
|
|
/* Enable the IrDA mode by setting the IREN bit in the CR3 register */
|
790 |
|
|
USARTx->CR3 |= CR3_IREN_Set;
|
791 |
|
|
}
|
792 |
|
|
else
|
793 |
|
|
{
|
794 |
|
|
/* Disable the IrDA mode by clearing the IREN bit in the CR3 register */
|
795 |
|
|
USARTx->CR3 &= CR3_IREN_Reset;
|
796 |
|
|
}
|
797 |
|
|
}
|
798 |
|
|
|
799 |
|
|
/*******************************************************************************
|
800 |
|
|
* Function Name : USART_GetFlagStatus
|
801 |
|
|
* Description : Checks whether the specified USART flag is set or not.
|
802 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
803 |
|
|
* This parameter can be one of the following values:
|
804 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
805 |
|
|
* - USART_FLAG: specifies the flag to check.
|
806 |
|
|
* This parameter can be one of the following values:
|
807 |
|
|
* - USART_FLAG_CTS: CTS Change flag (not available for
|
808 |
|
|
* UART4 and UART5)
|
809 |
|
|
* - USART_FLAG_LBD: LIN Break detection flag
|
810 |
|
|
* - USART_FLAG_TXE: Transmit data register empty flag
|
811 |
|
|
* - USART_FLAG_TC: Transmission Complete flag
|
812 |
|
|
* - USART_FLAG_RXNE: Receive data register not empty flag
|
813 |
|
|
* - USART_FLAG_IDLE: Idle Line detection flag
|
814 |
|
|
* - USART_FLAG_ORE: OverRun Error flag
|
815 |
|
|
* - USART_FLAG_NE: Noise Error flag
|
816 |
|
|
* - USART_FLAG_FE: Framing Error flag
|
817 |
|
|
* - USART_FLAG_PE: Parity Error flag
|
818 |
|
|
* Output : None
|
819 |
|
|
* Return : The new state of USART_FLAG (SET or RESET).
|
820 |
|
|
*******************************************************************************/
|
821 |
|
|
FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, u16 USART_FLAG)
|
822 |
|
|
{
|
823 |
|
|
FlagStatus bitstatus = RESET;
|
824 |
|
|
|
825 |
|
|
/* Check the parameters */
|
826 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
827 |
|
|
assert_param(IS_USART_FLAG(USART_FLAG));
|
828 |
|
|
assert_param(IS_USART_PERIPH_FLAG(USARTx, USART_FLAG)); /* The CTS flag is not available for UART4 and UART5 */
|
829 |
|
|
|
830 |
|
|
if ((USARTx->SR & USART_FLAG) != (u16)RESET)
|
831 |
|
|
{
|
832 |
|
|
bitstatus = SET;
|
833 |
|
|
}
|
834 |
|
|
else
|
835 |
|
|
{
|
836 |
|
|
bitstatus = RESET;
|
837 |
|
|
}
|
838 |
|
|
return bitstatus;
|
839 |
|
|
}
|
840 |
|
|
|
841 |
|
|
/*******************************************************************************
|
842 |
|
|
* Function Name : USART_ClearFlag
|
843 |
|
|
* Description : Clears the USARTx's pending flags.
|
844 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
845 |
|
|
* This parameter can be one of the following values:
|
846 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
847 |
|
|
* - USART_FLAG: specifies the flag to clear.
|
848 |
|
|
* This parameter can be any combination of the following values:
|
849 |
|
|
* - USART_FLAG_CTS: CTS Change flag (not available for
|
850 |
|
|
* UART4 and UART5).
|
851 |
|
|
* - USART_FLAG_LBD: LIN Break detection flag.
|
852 |
|
|
* - USART_FLAG_TC: Transmission Complete flag.
|
853 |
|
|
* - USART_FLAG_RXNE: Receive data register not empty flag.
|
854 |
|
|
* - USART_FLAG_IDLE: Idle Line detection flag.
|
855 |
|
|
* - USART_FLAG_ORE: OverRun Error flag.
|
856 |
|
|
* - USART_FLAG_NE: Noise Error flag.
|
857 |
|
|
* - USART_FLAG_FE: Framing Error flag.
|
858 |
|
|
* - USART_FLAG_PE: Parity Error flag.
|
859 |
|
|
*
|
860 |
|
|
* Note: - For IDLE, ORE, NE, FE and PE flags user has to read
|
861 |
|
|
* the USART DR register after calling this function.
|
862 |
|
|
* - TXE flag can't be cleared by this function, it's
|
863 |
|
|
* cleared only by a write to the USART DR register.
|
864 |
|
|
* Output : None
|
865 |
|
|
* Return : None
|
866 |
|
|
*******************************************************************************/
|
867 |
|
|
void USART_ClearFlag(USART_TypeDef* USARTx, u16 USART_FLAG)
|
868 |
|
|
{
|
869 |
|
|
/* Check the parameters */
|
870 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
871 |
|
|
assert_param(IS_USART_CLEAR_FLAG(USART_FLAG));
|
872 |
|
|
assert_param(IS_USART_PERIPH_FLAG(USARTx, USART_FLAG)); /* The CTS flag is not available for UART4 and UART5 */
|
873 |
|
|
|
874 |
|
|
USARTx->SR = (u16)~USART_FLAG;
|
875 |
|
|
}
|
876 |
|
|
|
877 |
|
|
/*******************************************************************************
|
878 |
|
|
* Function Name : USART_GetITStatus
|
879 |
|
|
* Description : Checks whether the specified USART interrupt has occurred or not.
|
880 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
881 |
|
|
* This parameter can be one of the following values:
|
882 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
883 |
|
|
* - USART_IT: specifies the USART interrupt source to check.
|
884 |
|
|
* This parameter can be one of the following values:
|
885 |
|
|
* - USART_IT_CTS: CTS change interrupt (not available for
|
886 |
|
|
* UART4 and UART5)
|
887 |
|
|
* - USART_IT_LBD: LIN Break detection interrupt
|
888 |
|
|
* - USART_IT_TXE: Tansmit Data Register empty interrupt
|
889 |
|
|
* - USART_IT_TC: Transmission complete interrupt
|
890 |
|
|
* - USART_IT_RXNE: Receive Data register not empty
|
891 |
|
|
* interrupt
|
892 |
|
|
* - USART_IT_IDLE: Idle line detection interrupt
|
893 |
|
|
* - USART_IT_ORE: OverRun Error interrupt
|
894 |
|
|
* - USART_IT_NE: Noise Error interrupt
|
895 |
|
|
* - USART_IT_FE: Framing Error interrupt
|
896 |
|
|
* - USART_IT_PE: Parity Error interrupt
|
897 |
|
|
* Output : None
|
898 |
|
|
* Return : The new state of USART_IT (SET or RESET).
|
899 |
|
|
*******************************************************************************/
|
900 |
|
|
ITStatus USART_GetITStatus(USART_TypeDef* USARTx, u16 USART_IT)
|
901 |
|
|
{
|
902 |
|
|
u32 bitpos = 0x00, itmask = 0x00, usartreg = 0x00;
|
903 |
|
|
ITStatus bitstatus = RESET;
|
904 |
|
|
|
905 |
|
|
/* Check the parameters */
|
906 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
907 |
|
|
assert_param(IS_USART_IT(USART_IT));
|
908 |
|
|
assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */
|
909 |
|
|
|
910 |
|
|
/* Get the USART register index */
|
911 |
|
|
usartreg = (((u8)USART_IT) >> 0x05);
|
912 |
|
|
|
913 |
|
|
/* Get the interrupt position */
|
914 |
|
|
itmask = USART_IT & IT_Mask;
|
915 |
|
|
|
916 |
|
|
itmask = (u32)0x01 << itmask;
|
917 |
|
|
|
918 |
|
|
if (usartreg == 0x01) /* The IT is in CR1 register */
|
919 |
|
|
{
|
920 |
|
|
itmask &= USARTx->CR1;
|
921 |
|
|
}
|
922 |
|
|
else if (usartreg == 0x02) /* The IT is in CR2 register */
|
923 |
|
|
{
|
924 |
|
|
itmask &= USARTx->CR2;
|
925 |
|
|
}
|
926 |
|
|
else /* The IT is in CR3 register */
|
927 |
|
|
{
|
928 |
|
|
itmask &= USARTx->CR3;
|
929 |
|
|
}
|
930 |
|
|
|
931 |
|
|
bitpos = USART_IT >> 0x08;
|
932 |
|
|
|
933 |
|
|
bitpos = (u32)0x01 << bitpos;
|
934 |
|
|
bitpos &= USARTx->SR;
|
935 |
|
|
|
936 |
|
|
if ((itmask != (u16)RESET)&&(bitpos != (u16)RESET))
|
937 |
|
|
{
|
938 |
|
|
bitstatus = SET;
|
939 |
|
|
}
|
940 |
|
|
else
|
941 |
|
|
{
|
942 |
|
|
bitstatus = RESET;
|
943 |
|
|
}
|
944 |
|
|
|
945 |
|
|
return bitstatus;
|
946 |
|
|
}
|
947 |
|
|
|
948 |
|
|
/*******************************************************************************
|
949 |
|
|
* Function Name : USART_ClearITPendingBit
|
950 |
|
|
* Description : Clears the USARTx’s interrupt pending bits.
|
951 |
|
|
* Input : - USARTx: Select the USART or the UART peripheral.
|
952 |
|
|
* This parameter can be one of the following values:
|
953 |
|
|
* - USART1, USART2, USART3, UART4 or UART5.
|
954 |
|
|
* - USART_IT: specifies the interrupt pending bit to clear.
|
955 |
|
|
* This parameter can be one of the following values:
|
956 |
|
|
* - USART_IT_CTS: CTS change interrupt (not available for
|
957 |
|
|
* UART4 and UART5)
|
958 |
|
|
* - USART_IT_LBD: LIN Break detection interrupt
|
959 |
|
|
* - USART_IT_TC: Transmission complete interrupt.
|
960 |
|
|
* - USART_IT_RXNE: Receive Data register not empty interrupt.
|
961 |
|
|
* - USART_IT_IDLE: Idle line detection interrupt.
|
962 |
|
|
* - USART_IT_ORE: OverRun Error interrupt.
|
963 |
|
|
* - USART_IT_NE: Noise Error interrupt.
|
964 |
|
|
* - USART_IT_FE: Framing Error interrupt.
|
965 |
|
|
* - USART_IT_PE: Parity Error interrupt.
|
966 |
|
|
*
|
967 |
|
|
* Note: - For IDLE, ORE, NE, FE and PE pending bits user has to
|
968 |
|
|
* read the USART DR register after calling this function.
|
969 |
|
|
* - TXE pending bit can't be cleared by this function, it's
|
970 |
|
|
* cleared only by a write to the USART DR register.
|
971 |
|
|
* Output : None
|
972 |
|
|
* Return : None
|
973 |
|
|
*******************************************************************************/
|
974 |
|
|
void USART_ClearITPendingBit(USART_TypeDef* USARTx, u16 USART_IT)
|
975 |
|
|
{
|
976 |
|
|
u16 bitpos = 0x00, itmask = 0x00;
|
977 |
|
|
|
978 |
|
|
/* Check the parameters */
|
979 |
|
|
assert_param(IS_USART_ALL_PERIPH(USARTx));
|
980 |
|
|
assert_param(IS_USART_CLEAR_IT(USART_IT));
|
981 |
|
|
assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */
|
982 |
|
|
|
983 |
|
|
bitpos = USART_IT >> 0x08;
|
984 |
|
|
|
985 |
|
|
itmask = (u16)((u16)0x01 << bitpos);
|
986 |
|
|
USARTx->SR = (u16)~itmask;
|
987 |
|
|
}
|
988 |
|
|
|
989 |
|
|
/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
|