Subversion Repositories openrisc

/******************** (C) COPYRIGHT 2007 STMicroelectronics ********************

* File Name          : stm32f10x_pwr.c

* Author             : MCD Application Team

* Date First Issued  : 09/29/2006

* Description        : This file provides all the PWR firmware functions.

********************************************************************************

* History:

* 04/02/2007: V0.2

* 02/05/2007: V0.1

* 09/29/2006: V0.01

********************************************************************************

* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS

* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.

* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,

* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE

* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING

* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

*******************************************************************************/

/* Includes ------------------------------------------------------------------*/

#include "stm32f10x_pwr.h"

#include "stm32f10x_rcc.h"

/* Private typedef -----------------------------------------------------------*/

/* Private define ------------------------------------------------------------*/

/* --------- PWR registers bit address in the alias region ---------- */

#define PWR_OFFSET               (PWR_BASE - PERIPH_BASE)

/* --- CR Register ---*/

/* Alias word address of DBP bit */

#define CR_OFFSET                (PWR_OFFSET + 0x00)

#define DBP_BitNumber            0x08

#define CR_DBP_BB                (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))

/* Alias word address of PVDE bit */

#define PVDE_BitNumber           0x04

#define CR_PVDE_BB               (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))

/* --- CSR Register ---*/

/* Alias word address of EWUP bit */

#define CSR_OFFSET               (PWR_OFFSET + 0x04)

#define EWUP_BitNumber           0x08

#define CSR_EWUP_BB              (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))

/* ------------------ PWR registers bit mask ------------------------ */

/* CR register bit mask */

#define CR_PDDS_Set              ((u32)0x00000002)

#define CR_DS_Mask               ((u32)0xFFFFFFFC)

#define CR_CWUF_Set              ((u32)0x00000004)

#define CR_PLS_Mask              ((u32)0xFFFFFF1F)

/* --------- Cortex System Control register bit mask ---------------- */

/* Cortex System Control register address */

#define SCB_SysCtrl              ((u32)0xE000ED10)

/* SLEEPDEEP bit mask */

#define SysCtrl_SLEEPDEEP_Set    ((u32)0x00000004)

/* Private macro -------------------------------------------------------------*/

/* Private variables ---------------------------------------------------------*/

/* Private function prototypes -----------------------------------------------*/

/* Private functions ---------------------------------------------------------*/

/*******************************************************************************

* Function Name  : PWR_DeInit

* Description    : Deinitializes the PWR peripheral registers to their default

*                  reset values.

* Input          : None

* Output         : None

* Return         : None

*******************************************************************************/

void PWR_DeInit(void)

{

  RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);

  RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE);

}

/*******************************************************************************

* Function Name  : PWR_BackupAccessCmd

* Description    : Enables or disables access to the RTC and backup registers.

* Input          : - NewState: new state of the access to the RTC and backup

*                    registers. This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void PWR_BackupAccessCmd(FunctionalState NewState)

{

  /* Check the parameters */

  assert(IS_FUNCTIONAL_STATE(NewState));

  *(vu32 *) CR_DBP_BB = (u32)NewState;

}

/*******************************************************************************

* Function Name  : PWR_PVDCmd

* Description    : Enables or disables the Power Voltage Detector(PVD).

* Input          : - NewState: new state of the PVD.

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void PWR_PVDCmd(FunctionalState NewState)

{

  /* Check the parameters */

  assert(IS_FUNCTIONAL_STATE(NewState));

  *(vu32 *) CR_PVDE_BB = (u32)NewState;

}

/*******************************************************************************

* Function Name  : PWR_PVDLevelConfig

* Description    : Configures the value detected by the Power Voltage Detector(PVD).

* Input          : - PWR_PVDLevel: specifies the PVD detection level

*                    This parameter can be one of the following values:

*                       - PWR_PVDLevel_2V2: PVD detection level set to 2.2V

*                       - PWR_PVDLevel_2V3: PVD detection level set to 2.3V

*                       - PWR_PVDLevel_2V4: PVD detection level set to 2.4V

*                       - PWR_PVDLevel_2V5: PVD detection level set to 2.5V

*                       - PWR_PVDLevel_2V6: PVD detection level set to 2.6V

*                       - PWR_PVDLevel_2V7: PVD detection level set to 2.7V

*                       - PWR_PVDLevel_2V8: PVD detection level set to 2.8V

*                       - PWR_PVDLevel_2V9: PVD detection level set to 2.9V

* Output         : None

* Return         : None

*******************************************************************************/

void PWR_PVDLevelConfig(u32 PWR_PVDLevel)

{

  u32 tmpreg = 0;

  /* Check the parameters */

  assert(IS_PWR_PVD_LEVEL(PWR_PVDLevel));

  tmpreg = PWR->CR;

  /* Clear PLS[7:5] bits */

  tmpreg &= CR_PLS_Mask;

  /* Set PLS[7:5] bits according to PWR_PVDLevel value */

  tmpreg |= PWR_PVDLevel;

  /* Store the new value */

  PWR->CR = tmpreg;

}

/*******************************************************************************

* Function Name  : PWR_WakeUpPinCmd

* Description    : Enables or disables the WakeUp Pin functionality.

* Input          : - NewState: new state of the WakeUp Pin functionality.

*                    This parameter can be: ENABLE or DISABLE.

* Output         : None

* Return         : None

*******************************************************************************/

void PWR_WakeUpPinCmd(FunctionalState NewState)

{

  /* Check the parameters */

  assert(IS_FUNCTIONAL_STATE(NewState));

  *(vu32 *) CSR_EWUP_BB = (u32)NewState;

}

/*******************************************************************************

* Function Name  : PWR_EnterSTOPMode

* Description    : Enters STOP mode.

* Input          : - PWR_Regulator: specifies the regulator state in STOP mode.

*                    This parameter can be one of the following values:

*                       - PWR_Regulator_ON: STOP mode with regulator ON

*                       - PWR_Regulator_LowPower: STOP mode with

*                         regulator in low power mode

*                  - PWR_STOPEntry: specifies if STOP mode in entered with WFI or

*                    WFE instruction.

*                    This parameter can be one of the following values:

*                       - PWR_STOPEntry_WFI: enter STOP mode with WFI instruction

*                       - PWR_STOPEntry_WFE: enter STOP mode with WFE instruction

* Output         : None

* Return         : None

*******************************************************************************/

void PWR_EnterSTOPMode(u32 PWR_Regulator, u8 PWR_STOPEntry)

{

  u32 tmpreg = 0;

  /* Check the parameters */

  assert(IS_PWR_REGULATOR(PWR_Regulator));

  assert(IS_PWR_STOP_ENTRY(PWR_STOPEntry));

  /* Select the regulator state in STOP mode ---------------------------------*/

  tmpreg = PWR->CR;

  /* Clear PDDS and LPDS bits */

  tmpreg &= CR_DS_Mask;

  /* Set LPDS bit according to PWR_Regulator value */

  tmpreg |= PWR_Regulator;

  /* Store the new value */

  PWR->CR = tmpreg;

  /* Set SLEEPDEEP bit of Cortex System Control Register */

  *(vu32 *) SCB_SysCtrl |= SysCtrl_SLEEPDEEP_Set;

  /* Select STOP mode entry --------------------------------------------------*/

  if(PWR_STOPEntry == PWR_STOPEntry_WFI)

  {

    /* Request Wait For Interrupt */

    __WFI();

  }

  else

  {

    /* Request Wait For Event */

    __WFE();

  }

}

/*******************************************************************************

* Function Name  : PWR_EnterSTANDBYMode

* Description    : Enters STANDBY mode.

* Input          : None

* Output         : None

* Return         : None

*******************************************************************************/

void PWR_EnterSTANDBYMode(void)

{

  /* Clear Wake-up flag */

  PWR->CR |= CR_CWUF_Set;

  /* Select STANDBY mode */

  PWR->CR |= CR_PDDS_Set;

  /* Set SLEEPDEEP bit of Cortex System Control Register */

  *(vu32 *) SCB_SysCtrl |= SysCtrl_SLEEPDEEP_Set;

  /* Request Wait For Interrupt */

  __WFI();

}

/*******************************************************************************

* Function Name  : PWR_GetFlagStatus

* Description    : Checks whether the specified PWR flag is set or not.

* Input          : - PWR_FLAG: specifies the flag to check.

*                    This parameter can be one of the following values:

*                       - PWR_FLAG_WU: Wake Up flag

*                       - PWR_FLAG_SB: StandBy flag

*                       - PWR_FLAG_PVDO: PVD Output

* Output         : None

* Return         : The new state of PWR_FLAG (SET or RESET).

*******************************************************************************/

FlagStatus PWR_GetFlagStatus(u32 PWR_FLAG)

{

  FlagStatus bitstatus = RESET;

  /* Check the parameters */

  assert(IS_PWR_GET_FLAG(PWR_FLAG));

  if ((PWR->CSR & PWR_FLAG) != (u32)RESET)

  {

    bitstatus = SET;

  }

  else

  {

    bitstatus = RESET;

  }

  /* Return the flag status */

  return bitstatus;

}

/*******************************************************************************

* Function Name  : PWR_ClearFlag

* Description    : Clears the PWR's pending flags.

* Input          : - PWR_FLAG: specifies the flag to clear.

*                    This parameter can be one of the following values:

*                       - PWR_FLAG_WU: Wake Up flag

*                       - PWR_FLAG_SB: StandBy flag

* Output         : None

* Return         : None

*******************************************************************************/

void PWR_ClearFlag(u32 PWR_FLAG)

{

  /* Check the parameters */

  assert(IS_PWR_CLEAR_FLAG(PWR_FLAG));

  PWR->CR |=  PWR_FLAG << 2;

}

/******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/