OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ColdFire_MCF52221_CodeWarrior/] [sources/] [lwipopts.h] - Blame information for rev 578

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 578 jeremybenn
/*
2
 * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
3
 * All rights reserved.
4
 *
5
 * Redistribution and use in source and binary forms, with or without modification,
6
 * are permitted provided that the following conditions are met:
7
 *
8
 * 1. Redistributions of source code must retain the above copyright notice,
9
 *    this list of conditions and the following disclaimer.
10
 * 2. Redistributions in binary form must reproduce the above copyright notice,
11
 *    this list of conditions and the following disclaimer in the documentation
12
 *    and/or other materials provided with the distribution.
13
 * 3. The name of the author may not be used to endorse or promote products
14
 *    derived from this software without specific prior written permission.
15
 *
16
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
17
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
18
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
19
 * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
20
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
21
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
22
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
23
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
24
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
25
 * OF SUCH DAMAGE.
26
 *
27
 * This file is part of the lwIP TCP/IP stack.
28
 *
29
 * Author: Adam Dunkels <adam@sics.se>
30
 *
31
 */
32
#ifndef __LWIPOPTS_H__
33
#define __LWIPOPTS_H__
34
 
35
#define TCPIP_THREAD_NAME               "tcp/ip"
36
#define TCPIP_THREAD_STACKSIZE          350
37
#define TCPIP_THREAD_PRIO               2
38
 
39
#define DEFAULT_THREAD_STACKSIZE        200
40
#define DEFAULT_THREAD_PRIO             1
41
 
42
#define ETH_PAD_SIZE                                    2
43
 
44
#define NOT_LWIP_DEBUG                  0
45
#define DBG_TYPES_ON                    0x00
46
#define LWIP_DBG_TYPES_ON               LWIP_DBG_OFF
47
 
48
#define ETHARP_DEBUG                    LWIP_DBG_OFF
49
#define NETIF_DEBUG                     LWIP_DBG_OFF
50
#define PBUF_DEBUG                      LWIP_DBG_OFF
51
#define API_LIB_DEBUG                   LWIP_DBG_OFF
52
#define API_MSG_DEBUG                   LWIP_DBG_OFF
53
#define SOCKETS_DEBUG                   LWIP_DBG_OFF
54
#define ICMP_DEBUG                      LWIP_DBG_OFF
55
#define IGMP_DEBUG                      LWIP_DBG_OFF
56
#define INET_DEBUG                      LWIP_DBG_OFF
57
#define IP_DEBUG                        LWIP_DBG_OFF
58
#define IP_REASS_DEBUG                  LWIP_DBG_OFF
59
#define RAW_DEBUG                       LWIP_DBG_OFF
60
#define MEM_DEBUG                       LWIP_DBG_OFF
61
#define MEMP_DEBUG                      LWIP_DBG_OFF
62
#define SYS_DEBUG                       LWIP_DBG_OFF
63
#define TCP_DEBUG                       LWIP_DBG_OFF
64
#define TCP_INPUT_DEBUG                 LWIP_DBG_OFF
65
#define TCP_FR_DEBUG                    LWIP_DBG_OFF
66
#define TCP_RTO_DEBUG                   LWIP_DBG_OFF
67
#define TCP_CWND_DEBUG                  LWIP_DBG_OFF
68
#define TCP_WND_DEBUG                   LWIP_DBG_OFF
69
#define TCP_OUTPUT_DEBUG                LWIP_DBG_OFF
70
#define TCP_RST_DEBUG                   LWIP_DBG_OFF
71
#define TCP_QLEN_DEBUG                  LWIP_DBG_OFF
72
#define UDP_DEBUG                       LWIP_DBG_OFF
73
#define TCPIP_DEBUG                     LWIP_DBG_OFF
74
#define PPP_DEBUG                       LWIP_DBG_OFF
75
#define SLIP_DEBUG                      LWIP_DBG_OFF
76
#define DHCP_DEBUG                      LWIP_DBG_OFF
77
#define AUTOIP_DEBUG                    LWIP_DBG_OFF
78
#define SNMP_MSG_DEBUG                  LWIP_DBG_OFF
79
#define SNMP_MIB_DEBUG                  LWIP_DBG_OFF
80
#define DNS_DEBUG                       LWIP_DBG_OFF
81
#define LWIP_NOASSERT                   0
82
 
83
#define ETHARP_TRUST_IP_MAC                             0
84
#define LWIP_UDP                                                0
85
 
86
/**
87
 * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
88
 * critical regions during buffer allocation, deallocation and memory
89
 * allocation and deallocation.
90
 */
91
#define SYS_LIGHTWEIGHT_PROT            1
92
 
93
/*
94
   ------------------------------------
95
   ---------- Memory options ----------
96
   ------------------------------------
97
*/
98
 
99
/**
100
 * MEM_ALIGNMENT: should be set to the alignment of the CPU
101
 *    4 byte alignment -> #define MEM_ALIGNMENT 4
102
 *    2 byte alignment -> #define MEM_ALIGNMENT 2
103
 */
104
#define MEM_ALIGNMENT                   4
105
 
106
/**
107
 * MEM_SIZE: the size of the heap memory. If the application will send
108
 * a lot of data that needs to be copied, this should be set high.
109
 */
110
#define MEM_SIZE                        (8*1024)
111
 
112
/*
113
   ------------------------------------------------
114
   ---------- Internal Memory Pool Sizes ----------
115
   ------------------------------------------------
116
*/
117
/**
118
 * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
119
 * If the application sends a lot of data out of ROM (or other static memory),
120
 * this should be set high.
121
 */
122
#define MEMP_NUM_PBUF                   20
123
 
124
/**
125
 * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
126
 * (requires the LWIP_TCP option)
127
 */
128
#define MEMP_NUM_TCP_PCB                10
129
 
130
/**
131
 * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
132
 * (requires the LWIP_TCP option)
133
 */
134
#define MEMP_NUM_TCP_SEG                8
135
 
136
/**
137
 * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
138
 * (requires NO_SYS==0)
139
 */
140
#define MEMP_NUM_SYS_TIMEOUT            5
141
 
142
/**
143
 * MEMP_NUM_NETBUF: the number of struct netbufs.
144
 * (only needed if you use the sequential API, like api_lib.c)
145
 */
146
#define MEMP_NUM_NETBUF                 4
147
 
148
/**
149
 * PBUF_POOL_SIZE: the number of buffers in the pbuf pool.
150
 */
151
#define PBUF_POOL_SIZE                  4
152
 
153
 
154
/*
155
   ----------------------------------
156
   ---------- Pbuf options ----------
157
   ----------------------------------
158
*/
159
 
160
/**
161
 * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is
162
 * designed to accomodate single full size TCP frame in one pbuf, including
163
 * TCP_MSS, IP header, and link header.
164
 */
165
#define PBUF_POOL_BUFSIZE               1500
166
 
167
/*
168
 ---------------------------------
169
 ---------- TCP options ----------
170
 ---------------------------------
171
*/
172
/**
173
 * LWIP_TCP==1: Turn on TCP.
174
 */
175
#define LWIP_TCP                        1
176
 
177
/* TCP Maximum segment size. */
178
#define TCP_MSS                         1500
179
 
180
/* TCP sender buffer space (bytes). */
181
#define TCP_SND_BUF                     1500
182
 
183
/**
184
 * TCP_WND: The size of a TCP window.
185
 */
186
#define TCP_WND                         1500
187
 
188
/**
189
 * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
190
 */
191
#define TCP_SYNMAXRTX                   4
192
 
193
/*
194
   ---------------------------------
195
   ---------- RAW options ----------
196
   ---------------------------------
197
*/
198
/**
199
 * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
200
 */
201
#define LWIP_RAW                        0
202
 
203
 
204
/*
205
   ------------------------------------
206
   ---------- Socket options ----------
207
   ------------------------------------
208
*/
209
/**
210
 * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
211
 */
212
#define LWIP_SOCKET                     0
213
 
214
 
215
/*
216
   ----------------------------------------
217
   ---------- Statistics options ----------
218
   ----------------------------------------
219
*/
220
/**
221
 * LWIP_STATS==1: Enable statistics collection in lwip_stats.
222
 */
223
#define LWIP_STATS                      0
224
 
225
/*
226
   ----------------------------------
227
   ---------- DHCP options ----------
228
   ----------------------------------
229
*/
230
/**
231
 * LWIP_DHCP==1: Enable DHCP module.
232
 */
233
#define LWIP_DHCP                       0
234
 
235
 
236
#define LWIP_PROVIDE_ERRNO                              0
237
 
238
#endif /* __LWIPOPTS_H__ */

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.