Subversion Repositories openrisc

/*

    FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd.

    ***************************************************************************

    *                                                                         *

    * If you are:                                                             *

    *                                                                         *

    *    + New to FreeRTOS,                                                   *

    *    + Wanting to learn FreeRTOS or multitasking in general quickly       *

    *    + Looking for basic training,                                        *

    *    + Wanting to improve your FreeRTOS skills and productivity           *

    *                                                                         *

    * then take a look at the FreeRTOS books - available as PDF or paperback  *

    *                                                                         *

    *        "Using the FreeRTOS Real Time Kernel - a Practical Guide"        *

    *                  http://www.FreeRTOS.org/Documentation                  *

    *                                                                         *

    * A pdf reference manual is also available.  Both are usually delivered   *

    * to your inbox within 20 minutes to two hours when purchased between 8am *

    * and 8pm GMT (although please allow up to 24 hours in case of            *

    * exceptional circumstances).  Thank you for your support!                *

    *                                                                         *

    ***************************************************************************

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under

    the terms of the GNU General Public License (version 2) as published by the

    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.

    ***NOTE*** The exception to the GPL is included to allow you to distribute

    a combined work that includes FreeRTOS without being obliged to provide the

    source code for proprietary components outside of the FreeRTOS kernel.

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT

    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

    more details. You should have received a copy of the GNU General Public

    License and the FreeRTOS license exception along with FreeRTOS; if not it

    can be viewed here: http://www.freertos.org/a00114.html and also obtained

    by writing to Richard Barry, contact details for whom are available on the

    FreeRTOS WEB site.

    1 tab == 4 spaces!

    http://www.FreeRTOS.org - Documentation, latest information, license and

    contact details.

    http://www.SafeRTOS.com - A version that is certified for use in safety

    critical systems.

    http://www.OpenRTOS.com - Commercial support, development, porting,

    licensing and training services.

*/

/*

 * This is a version of BlockQ.c that uses the alternative (Alt) API.

 *

 * Creates six tasks that operate on three queues as follows:

 *

 * The first two tasks send and receive an incrementing number to/from a queue.

 * One task acts as a producer and the other as the consumer.  The consumer is a

 * higher priority than the producer and is set to block on queue reads.  The queue

 * only has space for one item - as soon as the producer posts a message on the

 * queue the consumer will unblock, pre-empt the producer, and remove the item.

 *

 * The second two tasks work the other way around.  Again the queue used only has

 * enough space for one item.  This time the consumer has a lower priority than the

 * producer.  The producer will try to post on the queue blocking when the queue is

 * full.  When the consumer wakes it will remove the item from the queue, causing

 * the producer to unblock, pre-empt the consumer, and immediately re-fill the

 * queue.

 *

 * The last two tasks use the same queue producer and consumer functions.  This time the queue has

 * enough space for lots of items and the tasks operate at the same priority.  The

 * producer will execute, placing items into the queue.  The consumer will start

 * executing when either the queue becomes full (causing the producer to block) or

 * a context switch occurs (tasks of the same priority will time slice).

 *

 */

#include <stdlib.h>

/* Scheduler include files. */

#include "FreeRTOS.h"

#include "task.h"

#include "queue.h"

/* Demo program include files. */

#include "AltBlckQ.h"

#define blckqSTACK_SIZE         configMINIMAL_STACK_SIZE

#define blckqNUM_TASK_SETS      ( 3 )

/* Structure used to pass parameters to the blocking queue tasks. */

typedef struct BLOCKING_QUEUE_PARAMETERS

{

        xQueueHandle xQueue;                                    /*< The queue to be used by the task. */

        portTickType xBlockTime;                                /*< The block time to use on queue reads/writes. */

        volatile portSHORT *psCheckVariable;    /*< Incremented on each successful cycle to check the task is still running. */

} xBlockingQueueParameters;

/* Task function that creates an incrementing number and posts it on a queue. */

static portTASK_FUNCTION_PROTO( vBlockingQueueProducer, pvParameters );

/* Task function that removes the incrementing number from a queue and checks that

it is the expected number. */

static portTASK_FUNCTION_PROTO( vBlockingQueueConsumer, pvParameters );

/* Variables which are incremented each time an item is removed from a queue, and

found to be the expected value.

These are used to check that the tasks are still running. */

static volatile portSHORT sBlockingConsumerCount[ blckqNUM_TASK_SETS ] = { ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0 };

/* Variable which are incremented each time an item is posted on a queue.   These

are used to check that the tasks are still running. */

static volatile portSHORT sBlockingProducerCount[ blckqNUM_TASK_SETS ] = { ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0 };

/*-----------------------------------------------------------*/

void vStartAltBlockingQueueTasks( unsigned portBASE_TYPE uxPriority )

{

xBlockingQueueParameters *pxQueueParameters1, *pxQueueParameters2;

xBlockingQueueParameters *pxQueueParameters3, *pxQueueParameters4;

xBlockingQueueParameters *pxQueueParameters5, *pxQueueParameters6;

const unsigned portBASE_TYPE uxQueueSize1 = 1, uxQueueSize5 = 5;

const portTickType xBlockTime = ( portTickType ) 1000 / portTICK_RATE_MS;

const portTickType xDontBlock = ( portTickType ) 0;

        /* Create the first two tasks as described at the top of the file. */

        /* First create the structure used to pass parameters to the consumer tasks. */

        pxQueueParameters1 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );

        /* Create the queue used by the first two tasks to pass the incrementing number.

        Pass a pointer to the queue in the parameter structure. */

        pxQueueParameters1->xQueue = xQueueCreate( uxQueueSize1, ( unsigned portBASE_TYPE ) sizeof( unsigned portSHORT ) );

        /* The consumer is created first so gets a block time as described above. */

        pxQueueParameters1->xBlockTime = xBlockTime;

        /* Pass in the variable that this task is going to increment so we can check it

        is still running. */

        pxQueueParameters1->psCheckVariable = &( sBlockingConsumerCount[ 0 ] );

        /* Create the structure used to pass parameters to the producer task. */

        pxQueueParameters2 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );

        /* Pass the queue to this task also, using the parameter structure. */

        pxQueueParameters2->xQueue = pxQueueParameters1->xQueue;

        /* The producer is not going to block - as soon as it posts the consumer will

        wake and remove the item so the producer should always have room to post. */

        pxQueueParameters2->xBlockTime = xDontBlock;

        /* Pass in the variable that this task is going to increment so we can check

        it is still running. */

        pxQueueParameters2->psCheckVariable = &( sBlockingProducerCount[ 0 ] );

        /* Note the producer has a lower priority than the consumer when the tasks are

        spawned. */

        xTaskCreate( vBlockingQueueConsumer, ( signed portCHAR * ) "QConsB1", blckqSTACK_SIZE, ( void * ) pxQueueParameters1, uxPriority, NULL );

        xTaskCreate( vBlockingQueueProducer, ( signed portCHAR * ) "QProdB2", blckqSTACK_SIZE, ( void * ) pxQueueParameters2, tskIDLE_PRIORITY, NULL );

        /* Create the second two tasks as described at the top of the file.   This uses

        the same mechanism but reverses the task priorities. */

        pxQueueParameters3 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );

        pxQueueParameters3->xQueue = xQueueCreate( uxQueueSize1, ( unsigned portBASE_TYPE ) sizeof( unsigned portSHORT ) );

        pxQueueParameters3->xBlockTime = xDontBlock;

        pxQueueParameters3->psCheckVariable = &( sBlockingProducerCount[ 1 ] );

        pxQueueParameters4 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );

        pxQueueParameters4->xQueue = pxQueueParameters3->xQueue;

        pxQueueParameters4->xBlockTime = xBlockTime;

        pxQueueParameters4->psCheckVariable = &( sBlockingConsumerCount[ 1 ] );

        xTaskCreate( vBlockingQueueConsumer, ( signed portCHAR * ) "QProdB3", blckqSTACK_SIZE, ( void * ) pxQueueParameters3, tskIDLE_PRIORITY, NULL );

        xTaskCreate( vBlockingQueueProducer, ( signed portCHAR * ) "QConsB4", blckqSTACK_SIZE, ( void * ) pxQueueParameters4, uxPriority, NULL );

        /* Create the last two tasks as described above.  The mechanism is again just

        the same.  This time both parameter structures are given a block time. */

        pxQueueParameters5 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );

        pxQueueParameters5->xQueue = xQueueCreate( uxQueueSize5, ( unsigned portBASE_TYPE ) sizeof( unsigned portSHORT ) );

        pxQueueParameters5->xBlockTime = xBlockTime;

        pxQueueParameters5->psCheckVariable = &( sBlockingProducerCount[ 2 ] );

        pxQueueParameters6 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );

        pxQueueParameters6->xQueue = pxQueueParameters5->xQueue;

        pxQueueParameters6->xBlockTime = xBlockTime;

        pxQueueParameters6->psCheckVariable = &( sBlockingConsumerCount[ 2 ] );

        xTaskCreate( vBlockingQueueProducer, ( signed portCHAR * ) "QProdB5", blckqSTACK_SIZE, ( void * ) pxQueueParameters5, tskIDLE_PRIORITY, NULL );

        xTaskCreate( vBlockingQueueConsumer, ( signed portCHAR * ) "QConsB6", blckqSTACK_SIZE, ( void * ) pxQueueParameters6, tskIDLE_PRIORITY, NULL );

}

/*-----------------------------------------------------------*/

static portTASK_FUNCTION( vBlockingQueueProducer, pvParameters )

{

unsigned portSHORT usValue = 0;

xBlockingQueueParameters *pxQueueParameters;

portSHORT sErrorEverOccurred = pdFALSE;

        #ifdef USE_STDIO

        void vPrintDisplayMessage( const portCHAR * const * ppcMessageToSend );

                const portCHAR * const pcTaskStartMsg = "Alt blocking queue producer task started.\r\n";

                /* Queue a message for printing to say the task has started. */

                vPrintDisplayMessage( &pcTaskStartMsg );

        #endif

        pxQueueParameters = ( xBlockingQueueParameters * ) pvParameters;

        for( ;; )

        {

                if( xQueueAltSendToBack( pxQueueParameters->xQueue, ( void * ) &usValue, pxQueueParameters->xBlockTime ) != pdPASS )

                {

                        sErrorEverOccurred = pdTRUE;

                }

                else

                {

                        /* We have successfully posted a message, so increment the variable

                        used to check we are still running. */

                        if( sErrorEverOccurred == pdFALSE )

                        {

                                ( *pxQueueParameters->psCheckVariable )++;

                        }

                        /* Increment the variable we are going to post next time round.  The

                        consumer will expect the numbers to     follow in numerical order. */

                        ++usValue;

                }

        }

}

/*-----------------------------------------------------------*/

static portTASK_FUNCTION( vBlockingQueueConsumer, pvParameters )

{

unsigned portSHORT usData, usExpectedValue = 0;

xBlockingQueueParameters *pxQueueParameters;

portSHORT sErrorEverOccurred = pdFALSE;

        #ifdef USE_STDIO

        void vPrintDisplayMessage( const portCHAR * const * ppcMessageToSend );

                const portCHAR * const pcTaskStartMsg = "Alt blocking queue consumer task started.\r\n";

                /* Queue a message for printing to say the task has started. */

                vPrintDisplayMessage( &pcTaskStartMsg );

        #endif

        pxQueueParameters = ( xBlockingQueueParameters * ) pvParameters;

        for( ;; )

        {

                if( xQueueAltReceive( pxQueueParameters->xQueue, &usData, pxQueueParameters->xBlockTime ) == pdPASS )

                {

                        if( usData != usExpectedValue )

                        {

                                /* Catch-up. */

                                usExpectedValue = usData;

                                sErrorEverOccurred = pdTRUE;

                        }

                        else

                        {

                                /* We have successfully received a message, so increment the

                                variable used to check we are still running. */

                                if( sErrorEverOccurred == pdFALSE )

                                {

                                        ( *pxQueueParameters->psCheckVariable )++;

                                }

                                /* Increment the value we expect to remove from the queue next time

                                round. */

                                ++usExpectedValue;

                        }

                }

        }

}

/*-----------------------------------------------------------*/

/* This is called to check that all the created tasks are still running. */

portBASE_TYPE xAreAltBlockingQueuesStillRunning( void )

{

static portSHORT sLastBlockingConsumerCount[ blckqNUM_TASK_SETS ] = { ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0 };

static portSHORT sLastBlockingProducerCount[ blckqNUM_TASK_SETS ] = { ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0, ( unsigned portSHORT ) 0 };

portBASE_TYPE xReturn = pdPASS, xTasks;

        /* Not too worried about mutual exclusion on these variables as they are 16

        bits and we are only reading them. We also only care to see if they have

        changed or not.

        Loop through each check variable to and return pdFALSE if any are found not

        to have changed since the last call. */

        for( xTasks = 0; xTasks < blckqNUM_TASK_SETS; xTasks++ )

        {

                if( sBlockingConsumerCount[ xTasks ] == sLastBlockingConsumerCount[ xTasks ]  )

                {

                        xReturn = pdFALSE;

                }

                sLastBlockingConsumerCount[ xTasks ] = sBlockingConsumerCount[ xTasks ];

                if( sBlockingProducerCount[ xTasks ] == sLastBlockingProducerCount[ xTasks ]  )

                {

                        xReturn = pdFALSE;

                }

                sLastBlockingProducerCount[ xTasks ] = sBlockingProducerCount[ xTasks ];

        }

        return xReturn;

}