Subversion Repositories openrisc

/* ----------------------------------------------------------------------------

 *         ATMEL Microcontroller Software Support

 * ----------------------------------------------------------------------------

 * Copyright (c) 2008, Atmel Corporation

 *

 * All rights reserved.

 *

 * Redistribution and use in source and binary forms, with or without

 * modification, are permitted provided that the following conditions are met:

 *

 * - Redistributions of source code must retain the above copyright notice,

 * this list of conditions and the disclaimer below.

 *

 * Atmel's name may not be used to endorse or promote products derived from

 * this software without specific prior written permission.

 *

 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR

 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,

 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 * ----------------------------------------------------------------------------

 */

//------------------------------------------------------------------------------

//         Headers

//------------------------------------------------------------------------------

#include "slcdc.h"

#include <board.h>

#include <utility/assert.h>

#include <string.h>

//------------------------------------------------------------------------------

//         Local definitions

//------------------------------------------------------------------------------

/// Size of SLCDC buffer in bytes.

#define BUFFER_SIZE     320

//------------------------------------------------------------------------------

//         Global functions

//------------------------------------------------------------------------------

//------------------------------------------------------------------------------

/// Initializes the Segment LCD controller.

/// \param commons  Number of commons used by the display.

/// \param segments  Number of segments used by the display.

/// \param bias  Bias value.

/// \param timeSetting  Buffer timing value.

//------------------------------------------------------------------------------

void SLCDC_Configure(

    unsigned int commons,

    unsigned int segments,

    unsigned int bias,

    unsigned int timeSetting)

{

    SANITY_CHECK((commons > 0) && (commons <= 10));

    SANITY_CHECK((segments > 0) && (segments <= 40));

    SANITY_CHECK((bias & ~AT91C_SLCDC_BIAS) == 0);

        SANITY_CHECK((timeSetting & ~(0xF << 16)) == 0);

    SANITY_CHECK((timeSetting >> 16) < 0x0A);

    // Enable peripheral clock

    AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SLCD;

    AT91C_BASE_SLCDC->SLCDC_MR = (commons - 1) | ((segments - 1) << 8) | bias | timeSetting;

}

//------------------------------------------------------------------------------

/// Clears the SLCD display buffer.

//------------------------------------------------------------------------------

void SLCDC_Clear(void)

{

    memset((void *) AT91C_BASE_SLCDC->SLCDC_MEM, 0, BUFFER_SIZE);

}

//------------------------------------------------------------------------------

/// Enables the SLCD controller.

//------------------------------------------------------------------------------

void SLCDC_Enable(void)

{

    AT91C_BASE_SLCDC->SLCDC_CR = AT91C_SLCDC_LCDEN;

    while (AT91C_BASE_SLCDC -> SLCDC_SR != AT91C_SLCDC_ENA);

}

//------------------------------------------------------------------------------

/// Disables the SLCD controller.

//------------------------------------------------------------------------------

void SLCDC_Disable(void)

{

    AT91C_BASE_SLCDC->SLCDC_CR = AT91C_SLCDC_LCDDIS;

}

//------------------------------------------------------------------------------

/// Enables the SLCD low power mode.

//------------------------------------------------------------------------------

void SLCDC_EnableLowPowerMode(void)

{

    unsigned int value;

    value = AT91C_BASE_SLCDC->SLCDC_MR;

    value &= ~AT91C_SLCDC_LPMODE;

    value |=AT91C_SLCDC_LPMODE;

    AT91C_BASE_SLCDC->SLCDC_MR = value;

}

//------------------------------------------------------------------------------

/// Disables the SLCD low power mode

//------------------------------------------------------------------------------

void SLCDC_DisableLowPowerMode(void)

{

    unsigned int value;

    value = AT91C_BASE_SLCDC->SLCDC_MR;

    value &= ~AT91C_SLCDC_LPMODE;

    AT91C_BASE_SLCDC->SLCDC_MR = value;

}

//------------------------------------------------------------------------------

/// Adjusts the frame frequency. Frequency = FsCLK / (prescaler * divider . NCOM)

/// \param prescalerValue  Prescaler value

/// \param dividerValue  Divider value

//------------------------------------------------------------------------------

void SLCDC_SetFrameFreq(unsigned int prescalerValue, unsigned int dividerValue)

{

    SANITY_CHECK((prescalerValue & ~AT91C_SLCDC_PRESC) == 0);

    SANITY_CHECK((dividerValue & (~(0x07 << 8))) == 0);

    AT91C_BASE_SLCDC->SLCDC_FRR = prescalerValue | dividerValue;

}

//------------------------------------------------------------------------------

/// Sets the display mode (normal/force off/force on/blinking).

/// \param mode  Display mode to be set

//------------------------------------------------------------------------------

void SLCDC_SetDisplayMode(unsigned int mode)

{

    unsigned int value;

    SANITY_CHECK(mode < 8);

    value = AT91C_BASE_SLCDC->SLCDC_DR;

    value &= ~AT91C_SLCDC_DISPMODE;

    value |= mode;

    AT91C_BASE_SLCDC->SLCDC_DR = value;

}

//------------------------------------------------------------------------------

/// Adjusts the display blinking frequency.

/// Blinking frequency = Frame Frequency / LCDBLKFREQ.

/// \param frequency  Frequency value.

//------------------------------------------------------------------------------

void SLCDC_SetBlinkFreq(unsigned int frequency)

{

    unsigned int value;

    SANITY_CHECK((frequency & ~(0xFF << 8)) == 0);

    value = AT91C_BASE_SLCDC->SLCDC_DR;

    value &= ~AT91C_SLCDC_BLKFREQ;

    value |= frequency;

    AT91C_BASE_SLCDC->SLCDC_DR = frequency;

}

//------------------------------------------------------------------------------

/// Enables the selected SLCDC interrupt sources.

/// \param sources  Interrupt sources to enable.

//------------------------------------------------------------------------------

void SLCDC_EnableInterrupts(unsigned int sources)

{

    SANITY_CHECK((sources & 0xFFFFFFFA) == 0);

    AT91C_BASE_SLCDC->SLCDC_IER = sources;

}

//------------------------------------------------------------------------------

/// Disables the selected SLCDC interrupt sources.

/// \param sources  Interrupt sources to disable.

//------------------------------------------------------------------------------

void SLCDC_DisableInterrupts(unsigned int sources)

{

    SANITY_CHECK((sources & 0xFFFFFFFA) == 0);

    AT91C_BASE_SLCDC->SLCDC_IDR = sources;

}