Subversion Repositories openrisc_2011-10-31

//*****************************************************************************

//

// hw_usb.h - Macros for use in accessing the USB registers.

//

// Copyright (c) 2007-2008 Luminary Micro, Inc.  All rights reserved.

// 

// Software License Agreement

// 

// Luminary Micro, Inc. (LMI) is supplying this software for use solely and

// exclusively on LMI's microcontroller products.

// 

// The software is owned by LMI and/or its suppliers, and is protected under

// applicable copyright laws.  All rights are reserved.  You may not combine

// this software with "viral" open-source software in order to form a larger

// program.  Any use in violation of the foregoing restrictions may subject

// the user to criminal sanctions under applicable laws, as well as to civil

// liability for the breach of the terms and conditions of this license.

// 

// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED

// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF

// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.

// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR

// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.

// 

// This is part of revision 2523 of the Stellaris Peripheral Driver Library.

//

//*****************************************************************************

#ifndef __HW_USB_H__

#define __HW_USB_H__

//*****************************************************************************

//

// The following are defines for the Univeral Serial Bus (USB) Controller

// offsets.

//

//*****************************************************************************

#define USB_O_FADDR             0x00000000  // USB Device Functional Address

#define USB_O_POWER             0x00000001  // USB Power

#define USB_O_TXIS              0x00000002  // USB Transmit Interrupt Status

#define USB_O_RXIS              0x00000004  // USB Receive Interrupt Status

#define USB_O_TXIE              0x00000006  // USB Transmit Interrupt Enable

#define USB_O_RXIE              0x00000008  // USB Receive Interrupt Enable

#define USB_O_IS                0x0000000A  // USB General Interrupt Status

#define USB_O_IE                0x0000000B  // USB Interrupt Enable

#define USB_O_FRAME             0x0000000C  // USB Frame Value

#define USB_O_EPIDX             0x0000000E  // USB Endpoint Index

#define USB_O_TEST              0x0000000F  // USB Test Mode

#define USB_O_FIFO0             0x00000020  // USB FIFO Endpoint 0

#define USB_O_FIFO1             0x00000024  // USB FIFO Endpoint 1

#define USB_O_FIFO2             0x00000028  // USB FIFO Endpoint 2

#define USB_O_FIFO3             0x0000002C  // USB FIFO Endpoint 3

#define USB_O_DEVCTL            0x00000060  // USB Device Control

#define USB_O_TXFIFOSZ          0x00000062  // USB Transmit Dynamic FIFO Sizing

#define USB_O_RXFIFOSZ          0x00000063  // USB Receive Dynamic FIFO Sizing

#define USB_O_TXFIFOADD         0x00000064  // USB Transmit FIFO Start Address

#define USB_O_RXFIFOADD         0x00000066  // USB Receive FIFO Start Address

#define USB_O_CONTIM            0x0000007A  // USB Connect Timing

#define USB_O_VPLEN             0x0000007B  // USB OTG VBus Pulse Timing

#define USB_O_FSEOF             0x0000007D  // USB Full-Speed Last Transaction

                                            // to End of Frame Timing

#define USB_O_LSEOF             0x0000007E  // USB Low-Speed Last Transaction

                                            // to End of Frame Timing

#define USB_O_TXFUNCADDR0       0x00000080  // USB Transmit Functional Address

                                            // Endpoint 0

#define USB_O_TXHUBADDR0        0x00000082  // USB Transmit Hub Address

                                            // Endpoint 0

#define USB_O_TXHUBPORT0        0x00000083  // USB Transmit Hub Port Endpoint 0

#define USB_O_TXFUNCADDR1       0x00000088  // USB Transmit Functional Address

                                            // Endpoint 1

#define USB_O_TXHUBADDR1        0x0000008A  // USB Transmit Hub Address

                                            // Endpoint 1

#define USB_O_TXHUBPORT1        0x0000008B  // USB Transmit Hub Port Endpoint 1

#define USB_O_RXFUNCADDR1       0x0000008C  // USB Receive Functional Address

                                            // Endpoint 1

#define USB_O_RXHUBADDR1        0x0000008E  // USB Receive Hub Address Endpoint

                                            // 1

#define USB_O_RXHUBPORT1        0x0000008F  // USB Receive Hub Port Endpoint 1

#define USB_O_TXFUNCADDR2       0x00000090  // USB Transmit Functional Address

                                            // Endpoint 2

#define USB_O_TXHUBADDR2        0x00000092  // USB Transmit Hub Address

                                            // Endpoint 2

#define USB_O_TXHUBPORT2        0x00000093  // USB Transmit Hub Port Endpoint 2

#define USB_O_RXFUNCADDR2       0x00000094  // USB Receive Functional Address

                                            // Endpoint 2

#define USB_O_RXHUBADDR2        0x00000096  // USB Receive Hub Address Endpoint

                                            // 2

#define USB_O_RXHUBPORT2        0x00000097  // USB Receive Hub Port Endpoint 2

#define USB_O_TXFUNCADDR3       0x00000098  // USB Transmit Functional Address

                                            // Endpoint 3

#define USB_O_TXHUBADDR3        0x0000009A  // USB Transmit Hub Address

                                            // Endpoint 3

#define USB_O_TXHUBPORT3        0x0000009B  // USB Transmit Hub Port Endpoint 3

#define USB_O_RXFUNCADDR3       0x0000009C  // USB Receive Functional Address

                                            // Endpoint 3

#define USB_O_RXHUBADDR3        0x0000009E  // USB Receive Hub Address Endpoint

                                            // 3

#define USB_O_RXHUBPORT3        0x0000009F  // USB Receive Hub Port Endpoint 3

#define USB_O_CSRL0             0x00000102  // USB Control and Status Endpoint

                                            // 0 Low

#define USB_O_CSRH0             0x00000103  // USB Control and Status Endpoint

                                            // 0 High

#define USB_O_COUNT0            0x00000108  // USB Receive Byte Count Endpoint

                                            // 0

#define USB_O_TYPE0             0x0000010A  // USB Type Endpoint 0

#define USB_O_NAKLMT            0x0000010B  // USB NAK Limit

#define USB_O_TXMAXP1           0x00000110  // USB Maximum Transmit Data

                                            // Endpoint 1

#define USB_O_TXCSRL1           0x00000112  // USB Transmit Control and Status

                                            // Endpoint 1 Low

#define USB_O_TXCSRH1           0x00000113  // USB Transmit Control and Status

                                            // Endpoint 1 High

#define USB_O_RXMAXP1           0x00000114  // USB Maximum Receive Data

                                            // Endpoint 1

#define USB_O_RXCSRL1           0x00000116  // USB Receive Control and Status

                                            // Endpoint 1 Low

#define USB_O_RXCSRH1           0x00000117  // USB Receive Control and Status

                                            // Endpoint 1 High

#define USB_O_RXCOUNT1          0x00000118  // USB Receive Byte Count Endpoint

                                            // 1

#define USB_O_TXTYPE1           0x0000011A  // USB Host Transmit Configure Type

                                            // Endpoint 1

#define USB_O_TXINTERVAL1       0x0000011B  // USB Host Transmit Interval

                                            // Endpoint 1

#define USB_O_RXTYPE1           0x0000011C  // USB Host Configure Receive Type

                                            // Endpoint 1

#define USB_O_RXINTERVAL1       0x0000011D  // USB Host Receive Polling

                                            // Interval Endpoint 1

#define USB_O_TXMAXP2           0x00000120  // USB Maximum Transmit Data

                                            // Endpoint 2

#define USB_O_TXCSRL2           0x00000122  // USB Transmit Control and Status

                                            // Endpoint 2 Low

#define USB_O_TXCSRH2           0x00000123  // USB Transmit Control and Status

                                            // Endpoint 2 High

#define USB_O_RXMAXP2           0x00000124  // USB Maximum Receive Data

                                            // Endpoint 2

#define USB_O_RXCSRL2           0x00000126  // USB Receive Control and Status

                                            // Endpoint 2 Low

#define USB_O_RXCSRH2           0x00000127  // USB Receive Control and Status

                                            // Endpoint 2 High

#define USB_O_RXCOUNT2          0x00000128  // USB Receive Byte Count Endpoint

                                            // 2

#define USB_O_TXTYPE2           0x0000012A  // USB Host Transmit Configure Type

                                            // Endpoint 2

#define USB_O_TXINTERVAL2       0x0000012B  // USB Host Transmit Interval

                                            // Endpoint 2

#define USB_O_RXTYPE2           0x0000012C  // USB Host Configure Receive Type

                                            // Endpoint 2

#define USB_O_RXINTERVAL2       0x0000012D  // USB Host Receive Polling

                                            // Interval Endpoint 2

#define USB_O_TXMAXP3           0x00000130  // USB Maximum Transmit Data

                                            // Endpoint 3

#define USB_O_TXCSRL3           0x00000132  // USB Transmit Control and Status

                                            // Endpoint 3 Low

#define USB_O_TXCSRH3           0x00000133  // USB Transmit Control and Status

                                            // Endpoint 3 High

#define USB_O_RXMAXP3           0x00000134  // USB Maximum Receive Data

                                            // Endpoint 3

#define USB_O_RXCSRL3           0x00000136  // USB Receive Control and Status

                                            // Endpoint 3 Low

#define USB_O_RXCSRH3           0x00000137  // USB Receive Control and Status

                                            // Endpoint 3 High

#define USB_O_RXCOUNT3          0x00000138  // USB Receive Byte Count Endpoint

                                            // 3

#define USB_O_TXTYPE3           0x0000013A  // USB Host Transmit Configure Type

                                            // Endpoint 3

#define USB_O_TXINTERVAL3       0x0000013B  // USB Host Transmit Interval

                                            // Endpoint 3

#define USB_O_RXTYPE3           0x0000013C  // USB Host Configure Receive Type

                                            // Endpoint 3

#define USB_O_RXINTERVAL3       0x0000013D  // USB Host Receive Polling

                                            // Interval Endpoint 3

#define USB_O_RQPKTCOUNT1       0x00000304  // USB Request Packet Count in

                                            // Block Transfer Endpoint 1

#define USB_O_RQPKTCOUNT2       0x00000308  // USB Request Packet Count in

                                            // Block Transfer Endpoint 2

#define USB_O_RQPKTCOUNT3       0x0000030C  // USB Request Packet Count in

                                            // Block Transfer Endpoint 3

#define USB_O_RXDPKTBUFDIS      0x00000340  // USB Receive Double Packet Buffer

                                            // Disable

#define USB_O_TXDPKTBUFDIS      0x00000342  // USB Transmit Double Packet

                                            // Buffer Disable

#define USB_O_EPC               0x00000400  // USB External Power Control

#define USB_O_EPCRIS            0x00000404  // USB External Power Control Raw

                                            // Interrupt Status

#define USB_O_EPCIM             0x00000408  // USB External Power Control

                                            // Interrupt Mask

#define USB_O_EPCISC            0x0000040C  // USB External Power Control

                                            // Interrupt Status and Clear

#define USB_O_DRRIS             0x00000410  // USB Device Resume Raw Interrupt

                                            // Status

#define USB_O_DRIM              0x00000414  // USB Device Resume Interrupt Mask

#define USB_O_DRISC             0x00000418  // USB Device Resume Interrupt

                                            // Status and Clear

#define USB_O_GPCS              0x0000041C  // USB General-Purpose Control and

                                            // Status

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_FADDR register.

//

//*****************************************************************************

#define USB_FADDR_M             0x0000007F  // Function Address.

#define USB_FADDR_S             0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_POWER register.

//

//*****************************************************************************

#define USB_POWER_ISOUP         0x00000080  // ISO Update.

#define USB_POWER_SOFTCONN      0x00000040  // Soft Connect/Disconnect.

#define USB_POWER_RESET         0x00000008  // Reset.

#define USB_POWER_RESUME        0x00000004  // Resume Signaling.

#define USB_POWER_SUSPEND       0x00000002  // Suspend Mode.

#define USB_POWER_PWRDNPHY      0x00000001  // Power Down PHY.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXIS register.

//

//*****************************************************************************

#define USB_TXIS_EP3            0x00000008  // TX Endpoint 3 Interrupt.

#define USB_TXIS_EP2            0x00000004  // TX Endpoint 2 Interrupt.

#define USB_TXIS_EP1            0x00000002  // TX Endpoint 1 Interrupt.

#define USB_TXIS_EP0            0x00000001  // TX and RX Endpoint 0 Interrupt.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXIS register.

//

//*****************************************************************************

#define USB_RXIS_EP3            0x00000008  // RX Endpoint 3 Interrupt.

#define USB_RXIS_EP2            0x00000004  // RX Endpoint 2 Interrupt.

#define USB_RXIS_EP1            0x00000002  // RX Endpoint 1 Interrupt.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXIE register.

//

//*****************************************************************************

#define USB_TXIE_EP3            0x00000008  // TX Endpoint 3 Interrupt Enable.

#define USB_TXIE_EP2            0x00000004  // TX Endpoint 2 Interrupt Enable.

#define USB_TXIE_EP1            0x00000002  // TX Endpoint 1 Interrupt Enable.

#define USB_TXIE_EP0            0x00000001  // TX and RX Endpoint 0 Interrupt

                                            // Enable.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXIE register.

//

//*****************************************************************************

#define USB_RXIE_EP3            0x00000008  // RX Endpoint 3 Interrupt Enable.

#define USB_RXIE_EP2            0x00000004  // RX Endpoint 2 Interrupt Enable.

#define USB_RXIE_EP1            0x00000002  // RX Endpoint 1 Interrupt Enable.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_IS register.

//

//*****************************************************************************

#define USB_IS_VBUSERR          0x00000080  // VBus Error.

#define USB_IS_SESREQ           0x00000040  // Session Request.

#define USB_IS_DISCON           0x00000020  // Session Disconnect.

#define USB_IS_CONN             0x00000010  // Session Connect.

#define USB_IS_SOF              0x00000008  // Start of Frame.

#define USB_IS_BABBLE           0x00000004  // Babble Detected.

#define USB_IS_RESET            0x00000004  // Reset Signal Detected.

#define USB_IS_RESUME           0x00000002  // Resume Signal Detected.

#define USB_IS_SUSPEND          0x00000001  // Suspend Signal Detected.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_IE register.

//

//*****************************************************************************

#define USB_IE_VBUSERR          0x00000080  // Enable VBUS Error Interrupt.

#define USB_IE_SESREQ           0x00000040  // Enable Session Request

                                            // Interrupt.

#define USB_IE_DISCON           0x00000020  // Enable Disconnect Interrupt.

#define USB_IE_CONN             0x00000010  // Enable Connect Interrupt.

#define USB_IE_SOF              0x00000008  // Enable Start-of-Frame Interrupt.

#define USB_IE_BABBLE           0x00000004  // Enable Babble Interrupt.

#define USB_IE_RESET            0x00000004  // Enable Reset Interrupt.

#define USB_IE_RESUME           0x00000002  // Enable Resume Interrupt.

#define USB_IE_SUSPND           0x00000001  // Enable Suspend Interrupt.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_FRAME register.

//

//*****************************************************************************

#define USB_FRAME_M             0x000007FF  // Frame Number.

#define USB_FRAME_S             0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_EPIDX register.

//

//*****************************************************************************

#define USB_EPIDX_EPIDX_M       0x0000000F  // Endpoint Index.

#define USB_EPIDX_EPIDX_S       0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TEST register.

//

//*****************************************************************************

#define USB_TEST_FORCEH         0x00000080  // Force Host Mode.

#define USB_TEST_FIFOACC        0x00000040  // FIFO Access.

#define USB_TEST_FORCEFS        0x00000020  // Force Full Speed.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_FIFO0 register.

//

//*****************************************************************************

#define USB_FIFO0_EPDATA_M      0xFFFFFFFF  // Endpoint Data.

#define USB_FIFO0_EPDATA_S      0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_FIFO1 register.

//

//*****************************************************************************

#define USB_FIFO1_EPDATA_M      0xFFFFFFFF  // Endpoint Data.

#define USB_FIFO1_EPDATA_S      0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_FIFO2 register.

//

//*****************************************************************************

#define USB_FIFO2_EPDATA_M      0xFFFFFFFF  // Endpoint Data.

#define USB_FIFO2_EPDATA_S      0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_FIFO3 register.

//

//*****************************************************************************

#define USB_FIFO3_EPDATA_M      0xFFFFFFFF  // Endpoint Data.

#define USB_FIFO3_EPDATA_S      0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_DEVCTL register.

//

//*****************************************************************************

#define USB_DEVCTL_DEV          0x00000080  // Device Mode.

#define USB_DEVCTL_FSDEV        0x00000040  // Full-Speed Device Detected.

#define USB_DEVCTL_LSDEV        0x00000020  // Low-Speed Device Detected.

#define USB_DEVCTL_VBUS_M       0x00000018  // VBus Level.

#define USB_DEVCTL_VBUS_NONE    0x00000000  // Below SessionEnd

#define USB_DEVCTL_VBUS_SEND    0x00000008  // Above SessionEnd, below AValid

#define USB_DEVCTL_VBUS_AVALID  0x00000010  // Above AValid, below VBusValid

#define USB_DEVCTL_VBUS_VALID   0x00000018  // Above VBusValid

#define USB_DEVCTL_HOST         0x00000004  // Host Mode.

#define USB_DEVCTL_HOSTREQ      0x00000002  // Host Request.

#define USB_DEVCTL_SESSION      0x00000001  // Session Start/End.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXFIFOSZ register.

//

//*****************************************************************************

#define USB_TXFIFOSZ_DPB        0x00000010  // Double Packet Buffer Support.

#define USB_TXFIFOSZ_SIZE_M     0x0000000F  // Max Packet Size.

#define USB_TXFIFOSZ_SIZE_8     0x00000000  // 8

#define USB_TXFIFOSZ_SIZE_16    0x00000001  // 16

#define USB_TXFIFOSZ_SIZE_32    0x00000002  // 32

#define USB_TXFIFOSZ_SIZE_64    0x00000003  // 64

#define USB_TXFIFOSZ_SIZE_128   0x00000004  // 128

#define USB_TXFIFOSZ_SIZE_256   0x00000005  // 256

#define USB_TXFIFOSZ_SIZE_512   0x00000006  // 512

#define USB_TXFIFOSZ_SIZE_1024  0x00000007  // 1024

#define USB_TXFIFOSZ_SIZE_2048  0x00000008  // 2048

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXFIFOSZ register.

//

//*****************************************************************************

#define USB_RXFIFOSZ_DPB        0x00000010  // Double Packet Buffer Support.

#define USB_RXFIFOSZ_SIZE_M     0x0000000F  // Max Packet Size.

#define USB_RXFIFOSZ_SIZE_8     0x00000000  // 8

#define USB_RXFIFOSZ_SIZE_16    0x00000001  // 16

#define USB_RXFIFOSZ_SIZE_32    0x00000002  // 32

#define USB_RXFIFOSZ_SIZE_64    0x00000003  // 64

#define USB_RXFIFOSZ_SIZE_128   0x00000004  // 128

#define USB_RXFIFOSZ_SIZE_256   0x00000005  // 256

#define USB_RXFIFOSZ_SIZE_512   0x00000006  // 512

#define USB_RXFIFOSZ_SIZE_1024  0x00000007  // 1024

#define USB_RXFIFOSZ_SIZE_2048  0x00000008  // 2048

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXFIFOADD

// register.

//

//*****************************************************************************

#define USB_TXFIFOADD_ADDR_M    0x00001FFF  // Transmit/Receive Start Address.

#define USB_TXFIFOADD_ADDR_0    0x00000000  // 0

#define USB_TXFIFOADD_ADDR_8    0x00000001  // 8

#define USB_TXFIFOADD_ADDR_16   0x00000002  // 16

#define USB_TXFIFOADD_ADDR_32   0x00000003  // 32

#define USB_TXFIFOADD_ADDR_64   0x00000004  // 64

#define USB_TXFIFOADD_ADDR_128  0x00000005  // 128

#define USB_TXFIFOADD_ADDR_256  0x00000006  // 256

#define USB_TXFIFOADD_ADDR_512  0x00000007  // 512

#define USB_TXFIFOADD_ADDR_1024 0x00000008  // 1024

#define USB_TXFIFOADD_ADDR_2048 0x00000009  // 2048

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXFIFOADD

// register.

//

//*****************************************************************************

#define USB_RXFIFOADD_ADDR_M    0x00001FFF  // Transmit/Receive Start Address.

#define USB_RXFIFOADD_ADDR_0    0x00000000  // 0

#define USB_RXFIFOADD_ADDR_8    0x00000001  // 8

#define USB_RXFIFOADD_ADDR_16   0x00000002  // 16

#define USB_RXFIFOADD_ADDR_32   0x00000003  // 32

#define USB_RXFIFOADD_ADDR_64   0x00000004  // 64

#define USB_RXFIFOADD_ADDR_128  0x00000005  // 128

#define USB_RXFIFOADD_ADDR_256  0x00000006  // 256

#define USB_RXFIFOADD_ADDR_512  0x00000007  // 512

#define USB_RXFIFOADD_ADDR_1024 0x00000008  // 1024

#define USB_RXFIFOADD_ADDR_2048 0x00000009  // 2048

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_CONTIM register.

//

//*****************************************************************************

#define USB_CONTIM_WTCON_M      0x000000F0  // Connect Wait.

#define USB_CONTIM_WTID_M       0x0000000F  // Wait ID.

#define USB_CONTIM_WTCON_S      4

#define USB_CONTIM_WTID_S       0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_FSEOF register.

//

//*****************************************************************************

#define USB_FSEOF_FSEOFG_M      0x000000FF  // Full-Speed End-of-Frame Gap.

#define USB_FSEOF_FSEOFG_S      0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_LSEOF register.

//

//*****************************************************************************

#define USB_LSEOF_LSEOFG_M      0x000000FF  // Low-Speed End-of-Frame Gap.

#define USB_LSEOF_LSEOFG_S      0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXFUNCADDR0

// register.

//

//*****************************************************************************

#define USB_TXFUNCADDR0_ADDR_M  0x0000007F  // Device Address.

#define USB_TXFUNCADDR0_ADDR_S  0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXHUBADDR0

// register.

//

//*****************************************************************************

#define USB_TXHUBADDR0_MULTTRAN 0x00000080  // Multiple Translators.

#define USB_TXHUBADDR0_ADDR_M   0x0000007F  // Hub Address.

#define USB_TXHUBADDR0_ADDR_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXHUBPORT0

// register.

//

//*****************************************************************************

#define USB_TXHUBPORT0_PORT_M   0x0000007F  // Hub Port.

#define USB_TXHUBPORT0_PORT_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXFUNCADDR1

// register.

//

//*****************************************************************************

#define USB_TXFUNCADDR1_ADDR_M  0x0000007F  // Device Address.

#define USB_TXFUNCADDR1_ADDR_S  0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXHUBADDR1

// register.

//

//*****************************************************************************

#define USB_TXHUBADDR1_MULTTRAN 0x00000080  // Multiple Translators.

#define USB_TXHUBADDR1_ADDR_M   0x0000007F  // Hub Address.

#define USB_TXHUBADDR1_ADDR_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXHUBPORT1

// register.

//

//*****************************************************************************

#define USB_TXHUBPORT1_PORT_M   0x0000007F  // Hub Port.

#define USB_TXHUBPORT1_PORT_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXFUNCADDR1

// register.

//

//*****************************************************************************

#define USB_RXFUNCADDR1_ADDR_M  0x0000007F  // Device Address.

#define USB_RXFUNCADDR1_ADDR_S  0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXHUBADDR1

// register.

//

//*****************************************************************************

#define USB_RXHUBADDR1_MULTTRAN 0x00000080  // Multiple Translators.

#define USB_RXHUBADDR1_ADDR_M   0x0000007F  // Hub Address.

#define USB_RXHUBADDR1_ADDR_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXHUBPORT1

// register.

//

//*****************************************************************************

#define USB_RXHUBPORT1_PORT_M   0x0000007F  // Hub Port.

#define USB_RXHUBPORT1_PORT_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXFUNCADDR2

// register.

//

//*****************************************************************************

#define USB_TXFUNCADDR2_ADDR_M  0x0000007F  // Device Address.

#define USB_TXFUNCADDR2_ADDR_S  0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXHUBADDR2

// register.

//

//*****************************************************************************

#define USB_TXHUBADDR2_MULTTRAN 0x00000080  // Multiple Translators.

#define USB_TXHUBADDR2_ADDR_M   0x0000007F  // Hub Address.

#define USB_TXHUBADDR2_ADDR_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXHUBPORT2

// register.

//

//*****************************************************************************

#define USB_TXHUBPORT2_PORT_M   0x0000007F  // Hub Port.

#define USB_TXHUBPORT2_PORT_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXFUNCADDR2

// register.

//

//*****************************************************************************

#define USB_RXFUNCADDR2_ADDR_M  0x0000007F  // Device Address.

#define USB_RXFUNCADDR2_ADDR_S  0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXHUBADDR2

// register.

//

//*****************************************************************************

#define USB_RXHUBADDR2_MULTTRAN 0x00000080  // Multiple Translators.

#define USB_RXHUBADDR2_ADDR_M   0x0000007F  // Hub Address.

#define USB_RXHUBADDR2_ADDR_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXHUBPORT2

// register.

//

//*****************************************************************************

#define USB_RXHUBPORT2_PORT_M   0x0000007F  // Hub Port.

#define USB_RXHUBPORT2_PORT_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXFUNCADDR3

// register.

//

//*****************************************************************************

#define USB_TXFUNCADDR3_ADDR_M  0x0000007F  // Device Address.

#define USB_TXFUNCADDR3_ADDR_S  0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXHUBADDR3

// register.

//

//*****************************************************************************

#define USB_TXHUBADDR3_MULTTRAN 0x00000080  // Multiple Translators.

#define USB_TXHUBADDR3_ADDR_M   0x0000007F  // Hub Address.

#define USB_TXHUBADDR3_ADDR_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXHUBPORT3

// register.

//

//*****************************************************************************

#define USB_TXHUBPORT3_PORT_M   0x0000007F  // Hub Port.

#define USB_TXHUBPORT3_PORT_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXFUNCADDR3

// register.

//

//*****************************************************************************

#define USB_RXFUNCADDR3_ADDR_M  0x0000007F  // Device Address.

#define USB_RXFUNCADDR3_ADDR_S  0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXHUBADDR3

// register.

//

//*****************************************************************************

#define USB_RXHUBADDR3_MULTTRAN 0x00000080  // Multiple Translators.

#define USB_RXHUBADDR3_ADDR_M   0x0000007F  // Hub Address.

#define USB_RXHUBADDR3_ADDR_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXHUBPORT3

// register.

//

//*****************************************************************************

#define USB_RXHUBPORT3_PORT_M   0x0000007F  // Hub Port.

#define USB_RXHUBPORT3_PORT_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_CSRL0 register.

//

//*****************************************************************************

#define USB_CSRL0_NAKTO         0x00000080  // NAK Timeout.

#define USB_CSRL0_SETENDC       0x00000080  // Setup End Clear.

#define USB_CSRL0_STATUS        0x00000040  // Status Packet.

#define USB_CSRL0_RXRDYC        0x00000040  // RXRDY Clear.

#define USB_CSRL0_REQPKT        0x00000020  // Request Packet.

#define USB_CSRL0_STALL         0x00000020  // Send Stall.

#define USB_CSRL0_SETEND        0x00000010  // Setup End.

#define USB_CSRL0_ERROR         0x00000010  // Error.

#define USB_CSRL0_DATAEND       0x00000008  // Data End.

#define USB_CSRL0_SETUP         0x00000008  // Setup Packet.

#define USB_CSRL0_STALLED       0x00000004  // Endpoint Stalled.

#define USB_CSRL0_TXRDY         0x00000002  // Transmit Packet Ready.

#define USB_CSRL0_RXRDY         0x00000001  // Receive Packet Ready.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_CSRH0 register.

//

//*****************************************************************************

#define USB_CSRH0_DTWE          0x00000004  // Data Toggle Write Enable.

#define USB_CSRH0_DT            0x00000002  // Data Toggle.

#define USB_CSRH0_FLUSH         0x00000001  // Flush FIFO.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_COUNT0 register.

//

//*****************************************************************************

#define USB_COUNT0_COUNT_M      0x0000007F  // Count.

#define USB_COUNT0_COUNT_S      0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TYPE0 register.

//

//*****************************************************************************

#define USB_TYPE0_SPEED_M       0x000000C0  // Operating Speed.

#define USB_TYPE0_SPEED_FULL    0x00000080  // Full

#define USB_TYPE0_SPEED_LOW     0x000000C0  // Low

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_NAKLMT register.

//

//*****************************************************************************

#define USB_NAKLMT_NAKLMT_M     0x0000001F  // EP0 NAK Limit.

#define USB_NAKLMT_NAKLMT_S     0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXMAXP1 register.

//

//*****************************************************************************

#define USB_TXMAXP1_MULT_M      0x0000F800  // Multiplier.

#define USB_TXMAXP1_MAXLOAD_M   0x000007FF  // Maximum Payload.

#define USB_TXMAXP1_MULT_S      11

#define USB_TXMAXP1_MAXLOAD_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXCSRL1 register.

//

//*****************************************************************************

#define USB_TXCSRL1_NAKTO       0x00000080  // NAK Timeout

#define USB_TXCSRL1_INCTX       0x00000080  // Incomplete Transmit.

#define USB_TXCSRL1_CLRDT       0x00000040  // Clear Data Toggle.

#define USB_TXCSRL1_STALLED     0x00000020  // Endpoint Stalled.

#define USB_TXCSRL1_STALL       0x00000010  // Send Stall.

#define USB_TXCSRL1_SETUP       0x00000010  // Setup Packet.

#define USB_TXCSRL1_FLUSH       0x00000008  // Flush FIFO.

#define USB_TXCSRL1_ERROR       0x00000004  // Error.

#define USB_TXCSRL1_UNDRN       0x00000004  // Underrun.

#define USB_TXCSRL1_FIFONE      0x00000002  // FIFO Not Empty.

#define USB_TXCSRL1_TXRDY       0x00000001  // Transmit Packet Ready.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXCSRH1 register.

//

//*****************************************************************************

#define USB_TXCSRH1_AUTOSET     0x00000080  // Auto Set.

#define USB_TXCSRH1_ISO         0x00000040  // ISO.

#define USB_TXCSRH1_MODE        0x00000020  // Mode.

#define USB_TXCSRH1_DMAEN       0x00000010  // DMA Request Enable.

#define USB_TXCSRH1_FDT         0x00000008  // Force Data Toggle.

#define USB_TXCSRH1_DMAMOD      0x00000004  // DMA Request Mode.

#define USB_TXCSRH1_DTWE        0x00000002  // Data Toggle Write Enable.

#define USB_TXCSRH1_DT          0x00000001  // Data Toggle.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXMAXP1 register.

//

//*****************************************************************************

#define USB_RXMAXP1_MULT_M      0x0000F800  // Multiplier.

#define USB_RXMAXP1_MAXLOAD_M   0x000007FF  // Maximum Payload.

#define USB_RXMAXP1_MULT_S      11

#define USB_RXMAXP1_MAXLOAD_S   0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXCSRL1 register.

//

//*****************************************************************************

#define USB_RXCSRL1_CLRDT       0x00000080  // Clear Data Toggle.

#define USB_RXCSRL1_STALLED     0x00000040  // Endpoint Stalled.

#define USB_RXCSRL1_STALL       0x00000020  // Send Stall.

#define USB_RXCSRL1_REQPKT      0x00000020  // Request Packet.

#define USB_RXCSRL1_FLUSH       0x00000010  // Flush FIFO.

#define USB_RXCSRL1_DATAERR     0x00000008  // Data Error.

#define USB_RXCSRL1_NAKTO       0x00000008  // NAK Timeout.

#define USB_RXCSRL1_OVER        0x00000004  // Overrun.

#define USB_RXCSRL1_ERROR       0x00000004  // Error.

#define USB_RXCSRL1_FULL        0x00000002  // FIFO Full.

#define USB_RXCSRL1_RXRDY       0x00000001  // Receive Packet Ready.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXCSRH1 register.

//

//*****************************************************************************

#define USB_RXCSRH1_AUTOCL      0x00000080  // Auto Clear.

#define USB_RXCSRH1_AUTORQ      0x00000040  // Auto Request.

#define USB_RXCSRH1_ISO         0x00000040  // ISO.

#define USB_RXCSRH1_DMAEN       0x00000020  // DMA Request Enable.

#define USB_RXCSRH1_DISNYET     0x00000010  // Disable NYET

#define USB_RXCSRH1_PIDERR      0x00000010  // PID Error.

#define USB_RXCSRH1_DMAMOD      0x00000008  // DMA Request Mode.

#define USB_RXCSRH1_DTWE        0x00000004  // Data Toggle Write Enable.

#define USB_RXCSRH1_DT          0x00000002  // Data Toggle.

#define USB_RXCSRH1_INCRX       0x00000001  // Incomplete Receive.

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_RXCOUNT1 register.

//

//*****************************************************************************

#define USB_RXCOUNT1_COUNT_M    0x00001FFF  // Receive Packet Count.

#define USB_RXCOUNT1_COUNT_S    0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXTYPE1 register.

//

//*****************************************************************************

#define USB_TXTYPE1_SPEED_M     0x000000C0  // Operating Speed.

#define USB_TXTYPE1_SPEED_DFLT  0x00000000  // Default

#define USB_TXTYPE1_SPEED_FULL  0x00000080  // Full

#define USB_TXTYPE1_SPEED_LOW   0x000000C0  // Low

#define USB_TXTYPE1_PROTO_M     0x00000030  // Protocol.

#define USB_TXTYPE1_PROTO_CTRL  0x00000000  // Control

#define USB_TXTYPE1_PROTO_ISOC  0x00000010  // Isochronous

#define USB_TXTYPE1_PROTO_BULK  0x00000020  // Bulk

#define USB_TXTYPE1_PROTO_INT   0x00000030  // Interrupt

#define USB_TXTYPE1_TEP_M       0x0000000F  // Target Endpoint Number.

#define USB_TXTYPE1_TEP_S       0

//*****************************************************************************

//

// The following are defines for the bit fields in the USB_O_TXINTERVAL1

// register.

//

//*****************************************************************************

#define USB_TXINTERVAL1_NAKLMT_M \

                                0x000000FF  // NAK Limit.

#define USB_TXINTERVAL1_TXPOLL_M \

                                0x000000FF  // TX Polling

#define USB_TXINTERVAL1_TXPOLL_S \

#define USB_TXINTERVAL1_NAKLMT_S \