Subversion Repositories openrisc

//*****************************************************************************

//

// uart.h - Defines and Macros for the UART.

//

// Copyright (c) 2005-2008 Luminary Micro, Inc.  All rights reserved.

// 

// Software License Agreement

// 

// Luminary Micro, Inc. (LMI) is supplying this software for use solely and

// exclusively on LMI's microcontroller products.

// 

// The software is owned by LMI and/or its suppliers, and is protected under

// applicable copyright laws.  All rights are reserved.  You may not combine

// this software with "viral" open-source software in order to form a larger

// program.  Any use in violation of the foregoing restrictions may subject

// the user to criminal sanctions under applicable laws, as well as to civil

// liability for the breach of the terms and conditions of this license.

// 

// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED

// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF

// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.

// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR

// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.

// 

// This is part of revision 2523 of the Stellaris Peripheral Driver Library.

//

//*****************************************************************************

#ifndef __UART_H__

#define __UART_H__

//*****************************************************************************

//

// If building with a C++ compiler, make all of the definitions in this header

// have a C binding.

//

//*****************************************************************************

#ifdef __cplusplus

extern "C"

{

#endif

//*****************************************************************************

//

// Values that can be passed to UARTIntEnable, UARTIntDisable, and UARTIntClear

// as the ulIntFlags parameter, and returned from UARTIntStatus.

//

//*****************************************************************************

#define UART_INT_OE             0x400       // Overrun Error Interrupt Mask

#define UART_INT_BE             0x200       // Break Error Interrupt Mask

#define UART_INT_PE             0x100       // Parity Error Interrupt Mask

#define UART_INT_FE             0x080       // Framing Error Interrupt Mask

#define UART_INT_RT             0x040       // Receive Timeout Interrupt Mask

#define UART_INT_TX             0x020       // Transmit Interrupt Mask

#define UART_INT_RX             0x010       // Receive Interrupt Mask

//*****************************************************************************

//

// Values that can be passed to UARTConfigSetExpClk as the ulConfig parameter

// and returned by UARTConfigGetExpClk in the pulConfig parameter.

// Additionally, the UART_CONFIG_PAR_* subset can be passed to

// UARTParityModeSet as the ulParity parameter, and are returned by

// UARTParityModeGet.

//

//*****************************************************************************

#define UART_CONFIG_WLEN_MASK   0x00000060  // Mask for extracting word length

#define UART_CONFIG_WLEN_8      0x00000060  // 8 bit data

#define UART_CONFIG_WLEN_7      0x00000040  // 7 bit data

#define UART_CONFIG_WLEN_6      0x00000020  // 6 bit data

#define UART_CONFIG_WLEN_5      0x00000000  // 5 bit data

#define UART_CONFIG_STOP_MASK   0x00000008  // Mask for extracting stop bits

#define UART_CONFIG_STOP_ONE    0x00000000  // One stop bit

#define UART_CONFIG_STOP_TWO    0x00000008  // Two stop bits

#define UART_CONFIG_PAR_MASK    0x00000086  // Mask for extracting parity

#define UART_CONFIG_PAR_NONE    0x00000000  // No parity

#define UART_CONFIG_PAR_EVEN    0x00000006  // Even parity

#define UART_CONFIG_PAR_ODD     0x00000002  // Odd parity

#define UART_CONFIG_PAR_ONE     0x00000086  // Parity bit is one

#define UART_CONFIG_PAR_ZERO    0x00000082  // Parity bit is zero

//*****************************************************************************

//

// Values that can be passed to UARTFIFOLevelSet as the ulTxLevel parameter and

// returned by UARTFIFOLevelGet in the pulTxLevel.

//

//*****************************************************************************

#define UART_FIFO_TX1_8         0x00000000  // Transmit interrupt at 1/8 Full

#define UART_FIFO_TX2_8         0x00000001  // Transmit interrupt at 1/4 Full

#define UART_FIFO_TX4_8         0x00000002  // Transmit interrupt at 1/2 Full

#define UART_FIFO_TX6_8         0x00000003  // Transmit interrupt at 3/4 Full

#define UART_FIFO_TX7_8         0x00000004  // Transmit interrupt at 7/8 Full

//*****************************************************************************

//

// Values that can be passed to UARTFIFOLevelSet as the ulRxLevel parameter and

// returned by UARTFIFOLevelGet in the pulRxLevel.

//

//*****************************************************************************

#define UART_FIFO_RX1_8         0x00000000  // Receive interrupt at 1/8 Full

#define UART_FIFO_RX2_8         0x00000008  // Receive interrupt at 1/4 Full

#define UART_FIFO_RX4_8         0x00000010  // Receive interrupt at 1/2 Full

#define UART_FIFO_RX6_8         0x00000018  // Receive interrupt at 3/4 Full

#define UART_FIFO_RX7_8         0x00000020  // Receive interrupt at 7/8 Full

//*****************************************************************************

//

// Values that can be passed to UARTDMAEnable() and UARTDMADisable().

//

//*****************************************************************************

#define UART_DMA_ERR_RXSTOP     0x00000004  // Stop DMA receive if UART error

#define UART_DMA_TX             0x00000002  // Enable DMA for transmit

#define UART_DMA_RX             0x00000001  // Enable DMA for receive

//*****************************************************************************

//

// API Function prototypes

//

//*****************************************************************************

extern void UARTParityModeSet(unsigned long ulBase, unsigned long ulParity);

extern unsigned long UARTParityModeGet(unsigned long ulBase);

extern void UARTFIFOLevelSet(unsigned long ulBase, unsigned long ulTxLevel,

                             unsigned long ulRxLevel);

extern void UARTFIFOLevelGet(unsigned long ulBase, unsigned long *pulTxLevel,

                             unsigned long *pulRxLevel);

extern void UARTConfigSetExpClk(unsigned long ulBase, unsigned long ulUARTClk,

                                unsigned long ulBaud, unsigned long ulConfig);

extern void UARTConfigGetExpClk(unsigned long ulBase, unsigned long ulUARTClk,

                                unsigned long *pulBaud,

                                unsigned long *pulConfig);

extern void UARTEnable(unsigned long ulBase);

extern void UARTDisable(unsigned long ulBase);

extern void UARTEnableSIR(unsigned long ulBase, tBoolean bLowPower);

extern void UARTDisableSIR(unsigned long ulBase);

extern tBoolean UARTCharsAvail(unsigned long ulBase);

extern tBoolean UARTSpaceAvail(unsigned long ulBase);

extern long UARTCharGetNonBlocking(unsigned long ulBase);

extern long UARTCharGet(unsigned long ulBase);

extern tBoolean UARTCharPutNonBlocking(unsigned long ulBase,

                                       unsigned char ucData);

extern void UARTCharPut(unsigned long ulBase, unsigned char ucData);

extern void UARTBreakCtl(unsigned long ulBase, tBoolean bBreakState);

extern void UARTIntRegister(unsigned long ulBase, void(*pfnHandler)(void));

extern void UARTIntUnregister(unsigned long ulBase);

extern void UARTIntEnable(unsigned long ulBase, unsigned long ulIntFlags);

extern void UARTIntDisable(unsigned long ulBase, unsigned long ulIntFlags);

extern unsigned long UARTIntStatus(unsigned long ulBase, tBoolean bMasked);

extern void UARTIntClear(unsigned long ulBase, unsigned long ulIntFlags);

extern void UARTDMAEnable(unsigned long ulBase, unsigned long ulDMAFlags);

extern void UARTDMADisable(unsigned long ulBase, unsigned long ulDMAFlags);

//*****************************************************************************

//

// Several UART APIs have been renamed, with the original function name being

// deprecated.  These defines provide backward compatibility.

//

//*****************************************************************************

#ifndef DEPRECATED

#include "sysctl.h"

#define UARTConfigSet(a, b, c)                         \

        UARTConfigSetExpClk(a, SysCtlClockGet(), b, c)

#define UARTConfigGet(a, b, c)                         \

        UARTConfigGetExpClk(a, SysCtlClockGet(), b, c)

#define UARTCharNonBlockingGet(a) \

        UARTCharGetNonBlocking(a)

#define UARTCharNonBlockingPut(a, b) \

        UARTCharPutNonBlocking(a, b)

#endif

//*****************************************************************************

//

// Mark the end of the C bindings section for C++ compilers.

//

//*****************************************************************************

#ifdef __cplusplus

}

#endif

#endif //  __UART_H__