OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [HCS12_CodeWarrior_small/] [CODE/] [PE_Error.H] - Blame information for rev 588

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 588 jeremybenn
/** ###################################################################
2
**     THIS BEAN MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
3
**     Filename  : PE_Error.H
4
**     Project   : RTOSDemo
5
**     Processor : MC9S12C32CFU
6
**     Beantype  : PE_Error
7
**     Version   : Driver 01.00
8
**     Compiler  : Metrowerks HC12 C Compiler
9
**     Date/Time : 10/05/2005, 11:11
10
**     Abstract  :
11
**         This bean "PE_Error" contains internal definitions
12
**         of the error constants.
13
**     Settings  :
14
**     Contents  :
15
**         No public methods
16
**
17
**     (c) Copyright UNIS, spol. s r.o. 1997-2002
18
**     UNIS, spol. s r.o.
19
**     Jundrovska 33
20
**     624 00 Brno
21
**     Czech Republic
22
**     http      : www.processorexpert.com
23
**     mail      : info@processorexpert.com
24
** ###################################################################*/
25
 
26
#ifndef __PE_Error_H
27
#define __PE_Error_H
28
 
29
#define ERR_OK           0             /* OK */
30
#define ERR_SPEED        1             /* This device does not work in the active speed mode. */
31
#define ERR_RANGE        2             /* Parameter out of range. */
32
#define ERR_VALUE        3             /* Parameter of incorrect value. */
33
#define ERR_OVERFLOW     4             /* Timer overflow. */
34
#define ERR_MATH         5             /* Overflow during evaluation. */
35
#define ERR_ENABLED      6             /* Device is enabled. */
36
#define ERR_DISABLED     7             /* Device is disabled. */
37
#define ERR_BUSY         8             /* Device is busy. */
38
#define ERR_NOTAVAIL     9             /* Requested value or method not available. */
39
#define ERR_RXEMPTY      10            /* No data in receiver. */
40
#define ERR_TXFULL       11            /* Transmitter is full. */
41
#define ERR_BUSOFF       12            /* Bus not available. */
42
#define ERR_OVERRUN      13            /* Overrun error is detected. */
43
#define ERR_FRAMING      14            /* Framing error is detected. */
44
#define ERR_PARITY       15            /* Parity error is detected. */
45
#define ERR_NOISE        16            /* Noise error is detected. */
46
#define ERR_IDLE         17            /* Idle error is detectes. */
47
#define ERR_FAULT        18            /* Fault error is detected. */
48
#define ERR_BREAK        19            /* Break char is received during communication. */
49
#define ERR_CRC          20            /* CRC error is detected. */
50
#define ERR_ARBITR       21            /* A node losts arbitration. This error occurs if two nodes start transmission at the same time. */
51
#define ERR_PROTECT      22            /* Protection error is detected. */
52
 
53
#endif __PE_Error_H

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.