Subversion Repositories openrisc

# THIS SAMPLE CODE IS PROVIDED AS IS AND IS SUBJECT TO ALTERATIONS. FUJITSU */

# MICROELECTRONICS ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR */

# ELIGIBILITY FOR ANY PURPOSES.                                             */

#                 (C) Fujitsu Microelectronics Europe GmbH                  */

# Environment and memory manioulation after program upload

# Settings

SET VARIABLE abortIRQ0 = 0x1

SET VARIABLE intVectorMonitorDebugger = 0xFFC00

# Disable all Interrupts

SET REGISTER I = 0x0

# Set Table Base Register

SET REGISTER TBR = intVectorMonitorDebugger

# Run to smd_tbr and save TBR of Application

go ,Start91460\smd_tbr

SET VARIABLE intVectorApllication  = %r0

SET REGISTER TBR = intVectorApllication

# Copy required vector table entries of monitor debugger in vector table of application

MOVE intVectorMonitorDebugger + 0x3C0..intVectorMonitorDebugger + 0x3FF, intVectorApllication + 0x3C0

# Prepare Entries for INT0

IF %abortIRQ0 == 0x1

  MOVE intVectorMonitorDebugger + 0x3C0..intVectorMonitorDebugger + 0x3C3, intVectorApllication + 0x3BC

  SET MEMORY/BYTE 0x32 = 0x3

  SET MEMORY/BYTE 0x30 = 0x0

  SET MEMORY/BYTE 0x31 = 0x1

  SET MEMORY/BYTE 0x440 = 0x10

  SET REGISTER ILM = 0x1E

ENDIF

# Setting indicates software reset, which leads to that the clock settings are not changed.

SET REGISTER R4 = 0x8

# Set TBR to Vector table of application

SET REGISTER TBR = intVectorApllication

# Run to smd_c and let the CS enabled

go noClockStartup,Start91460\smd_cs

set register r2 = %r2|0x2

# Run to main()

go ,main