Subversion Repositories openrisc

/******************************************************************************

* DISCLAIMER

* This software is supplied by Renesas Technology Corp. and is only

* intended for use with Renesas products. No other uses are authorized.

* This software is owned by Renesas Technology Corp. and is protected under

* all applicable laws, including copyright laws.

* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES

* REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY,

* INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

* PARTICULAR PURPOSE AND NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY

* DISCLAIMED.

* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS

* TECHNOLOGY CORP. NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE

* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES

* FOR ANY REASON RELATED TO THE THIS SOFTWARE, EVEN IF RENESAS OR ITS

* AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

* Renesas reserves the right, without notice, to make changes to this

* software and to discontinue the availability of this software.

* By using this software, you agree to the additional terms and

* conditions found by accessing the following link:

* http://www.renesas.com/disclaimer

******************************************************************************

* Copyright (C) 2008. Renesas Technology Corp., All Rights Reserved.

*******************************************************************************

* File Name    : phy.c

* Version      : 1.01

* Description  : Ethernet PHY device driver

******************************************************************************

* History : DD.MM.YYYY Version Description

*         : 15.02.2010 1.00    First Release

*         : 06.04.2010 1.01    RX62N changes

******************************************************************************/

/******************************************************************************

Includes   <System Includes> , "Project Includes"

******************************************************************************/

#include <iorx62n.h>

#include "r_ether.h"

#include "phy.h"

#include "FreeRTOS.h"

#include "task.h"

/******************************************************************************

Typedef definitions

******************************************************************************/

/******************************************************************************

Macro definitions

******************************************************************************/

/******************************************************************************

Imported global variables and functions (from other files)

******************************************************************************/

/******************************************************************************

Exported global variables and functions (to be accessed by other files)

******************************************************************************/

/******************************************************************************

Private global variables and functions

******************************************************************************/

uint16_t  _phy_read( uint16_t reg_addr );

void  _phy_write( uint16_t reg_addr, uint16_t data );

void  _phy_preamble( void );

void  _phy_reg_set( uint16_t reg_addr, int32_t option );

void  _phy_reg_read( uint16_t *data );

void  _phy_reg_write( uint16_t data );

void  _phy_ta_z0( void );

void  _phy_ta_10( void );

void  _phy_mii_write_1( void );

void  _phy_mii_write_0( void );

/**

 * External functions

 */

/******************************************************************************

* Function Name: phy_init

* Description  : Resets Ethernet PHY device

* Arguments    : none

* Return Value : none

******************************************************************************/

int16_t  phy_init( void )

{

  uint16_t reg;

  uint32_t count;

  /* Reset PHY */

  _phy_write(BASIC_MODE_CONTROL_REG, 0x8000);

  count = 0;

  do

  {

          vTaskDelay( 2 / portTICK_RATE_MS );

      reg = _phy_read(BASIC_MODE_CONTROL_REG);

          count++;

  } while (reg & 0x8000 && count < PHY_RESET_WAIT);

  if( count < PHY_RESET_WAIT )

  {

        return R_PHY_OK;

  }

  return R_PHY_ERROR;

}

/******************************************************************************

* Function Name: phy_set_100full

* Description  : Set Ethernet PHY device to 100 Mbps full duplex

* Arguments    : none

* Return Value : none

******************************************************************************/

void phy_set_100full( void )

{

        _phy_write(BASIC_MODE_CONTROL_REG, 0x2100);

}

/******************************************************************************

* Function Name: phy_set_10half

* Description  : Sets Ethernet PHY device to 10 Mbps half duplexR

* Arguments    : none

* Return Value : none

******************************************************************************/

void phy_set_10half( void )

{

        _phy_write(BASIC_MODE_CONTROL_REG, 0x0000);

}

/******************************************************************************

* Function Name: phy_set_autonegotiate

* Description  : Starts autonegotiate and reports the other side's

*              : physical capability

* Arguments    : none

* Return Value : bit 8 - Full duplex 100 mbps

*              : bit 7 - Half duplex 100 mbps

*              : bit 6 - Full duplex 10 mbps

*              : bit 5 - Half duplex 10 mbps

*              : bit 4:0 - Always set to 00001 (IEEE 802.3)

*              : -1 if error

******************************************************************************/

int16_t phy_set_autonegotiate( void )

{

  uint16_t reg;

  uint32_t count;

  _phy_write(AN_ADVERTISEMENT_REG, 0x01E1);

  _phy_write(BASIC_MODE_CONTROL_REG, 0x1200);

  count = 0;

  do

  {

      reg = _phy_read(BASIC_MODE_STATUS_REG);

      count++;

          vTaskDelay( 100 / portTICK_RATE_MS );

          /* Make sure we don't break out if reg just contains 0xffff. */

          if( reg == 0xffff )

          {

                reg = 0;

          }

  } while (!(reg & 0x0020) && (count < PHY_AUTO_NEGOTIATON_WAIT));

  if (count >= PHY_AUTO_NEGOTIATON_WAIT)

  {

      return R_PHY_ERROR;

  }

  else

  {

      /* Get the link partner response */

          reg = (int16_t)_phy_read(AN_LINK_PARTNER_ABILITY_REG);

          if (reg & ( 1 << 8 ) )

          {

                  return PHY_LINK_100F;

          }

          if (reg & ( 1 << 7 ) )

          {

                  return PHY_LINK_100H;

          }

          if (reg & ( 1 << 6 ) )

          {

                  return PHY_LINK_10F;

          }

          if (reg & 1 << 5 )

          {

                  return PHY_LINK_10H;

          }

          return (-1);

  }

}

/**

 * Internal functions

 */

/******************************************************************************

* Function Name: _phy_read

* Description  : Reads a PHY register

* Arguments    : reg_addr - address of the PHY register

* Return Value : read value

******************************************************************************/

uint16_t _phy_read( uint16_t reg_addr )

{

  uint16_t data;

  _phy_preamble();

  _phy_reg_set( reg_addr, PHY_READ );

  _phy_ta_z0();

  _phy_reg_read( &data );

  _phy_ta_z0();

  return( data );

}

/******************************************************************************

* Function Name: _phy_write

* Description  : Writes to a PHY register

* Arguments    : reg_addr - address of the PHY register

*              : data - value

* Return Value : none

******************************************************************************/

void  _phy_write( uint16_t reg_addr, uint16_t data )

{

  _phy_preamble();

  _phy_reg_set( reg_addr, PHY_WRITE );

  _phy_ta_10();

  _phy_reg_write( data );

  _phy_ta_z0();

}

/******************************************************************************

* Function Name: _phy_preamble

* Description  : As preliminary preparation for access to the PHY module register,

*                "1" is output via the MII management interface.

* Arguments    : none

* Return Value : none

******************************************************************************/

void  _phy_preamble( void )

{

  int16_t i;

  i = 32;

  while( i > 0 )

  {

    _phy_mii_write_1();

    i--;

  }

}

/******************************************************************************

* Function Name: _phy_reg_set

* Description  : Sets a PHY device to read or write mode

* Arguments    : reg_addr - address of the PHY register

*              : option - mode

* Return Value : none

******************************************************************************/

void  _phy_reg_set( uint16_t reg_addr, int32_t option )

{

  int32_t    i;

  uint16_t data;

  data = 0;

  data = (PHY_ST << 14);        /* ST code    */

  if( option == PHY_READ )

  {

    data |= (PHY_READ << 12);  /* OP code(RD)  */

  }

  else

  {

    data |= (PHY_WRITE << 12);  /* OP code(WT)  */

  }

  data |= (PHY_ADDR << 7);    /* PHY Address  */

  data |= (reg_addr << 2);    /* Reg Address  */

  i = 14;

  while( i > 0 )

  {

    if( (data & 0x8000) == 0 )

    {

      _phy_mii_write_0();

    }

    else

    {

      _phy_mii_write_1();

    }

    data <<= 1;

    i--;

  }

}

/******************************************************************************

* Function Name: _phy_reg_read

* Description  : Reads PHY register through MII interface

* Arguments    : data - pointer to store the data read

* Return Value : none

******************************************************************************/

void  _phy_reg_read( uint16_t *data )

{

  int32_t      i, j;

  uint16_t   reg_data;

  reg_data = 0;

  i = 16;

  while( i > 0 )

  {

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000000;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000001;

    }

        reg_data <<= 1;

    reg_data |= (uint16_t)((ETHERC.PIR.LONG & 0x00000008) >> 3);  /* MDI read  */

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000001;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000000;

    }

    i--;

  }

  *data = reg_data;

}

/******************************************************************************

* Function Name: _phy_reg_write

* Description  : Writes to PHY register through MII interface

* Arguments    : data - value to write

* Return Value : none

******************************************************************************/

void  _phy_reg_write( uint16_t data )

{

  int32_t  i;

  i = 16;

  while( i > 0 )

  {

    if( (data & 0x8000) == 0 )

    {

      _phy_mii_write_0();

    }

    else

    {

      _phy_mii_write_1();

    }

    i--;

    data <<= 1;

  }

}

/******************************************************************************

* Function Name: _phy_ta_z0

* Description  : Performs bus release so that PHY can drive data

*              : for read operation

* Arguments    : none

* Return Value : none

******************************************************************************/

void  _phy_ta_z0( void )

{

    int32_t j;

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000000;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000001;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000001;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000000;

    }

}

/******************************************************************************

* Function Name: _phy_ta_10

* Description  : Switches data bus so MII interface can drive data

*              : for write operation

* Arguments    : none

* Return Value : none

******************************************************************************/

void _phy_ta_10(void)

{

    _phy_mii_write_1();

    _phy_mii_write_0();

}

/******************************************************************************

* Function Name: _phy_mii_write_1

* Description  : Outputs 1 to the MII interface

* Arguments    : none

* Return Value : none

******************************************************************************/

void  _phy_mii_write_1( void )

{

    int32_t j;

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000006;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000007;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000007;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000006;

    }

}

/******************************************************************************

* Function Name: _phy_mii_write_0

* Description  : Outputs 0 to the MII interface

* Arguments    : none

* Return Value : none

******************************************************************************/

void  _phy_mii_write_0( void )

{

    int32_t j;

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000002;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000003;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000003;

    }

    for(j = MDC_WAIT; j > 0; j--)

        {

        ETHERC.PIR.LONG = 0x00000002;

    }

}