OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [dsPIC_MPLAB/] [timertest.c] - Blame information for rev 592

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 592 jeremybenn
/*
2
    FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd.
3
 
4
    ***************************************************************************
5
    *                                                                         *
6
    * If you are:                                                             *
7
    *                                                                         *
8
    *    + New to FreeRTOS,                                                   *
9
    *    + Wanting to learn FreeRTOS or multitasking in general quickly       *
10
    *    + Looking for basic training,                                        *
11
    *    + Wanting to improve your FreeRTOS skills and productivity           *
12
    *                                                                         *
13
    * then take a look at the FreeRTOS books - available as PDF or paperback  *
14
    *                                                                         *
15
    *        "Using the FreeRTOS Real Time Kernel - a Practical Guide"        *
16
    *                  http://www.FreeRTOS.org/Documentation                  *
17
    *                                                                         *
18
    * A pdf reference manual is also available.  Both are usually delivered   *
19
    * to your inbox within 20 minutes to two hours when purchased between 8am *
20
    * and 8pm GMT (although please allow up to 24 hours in case of            *
21
    * exceptional circumstances).  Thank you for your support!                *
22
    *                                                                         *
23
    ***************************************************************************
24
 
25
    This file is part of the FreeRTOS distribution.
26
 
27
    FreeRTOS is free software; you can redistribute it and/or modify it under
28
    the terms of the GNU General Public License (version 2) as published by the
29
    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
30
    ***NOTE*** The exception to the GPL is included to allow you to distribute
31
    a combined work that includes FreeRTOS without being obliged to provide the
32
    source code for proprietary components outside of the FreeRTOS kernel.
33
    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
34
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
35
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
36
    more details. You should have received a copy of the GNU General Public
37
    License and the FreeRTOS license exception along with FreeRTOS; if not it
38
    can be viewed here: http://www.freertos.org/a00114.html and also obtained
39
    by writing to Richard Barry, contact details for whom are available on the
40
    FreeRTOS WEB site.
41
 
42
    1 tab == 4 spaces!
43
 
44
    http://www.FreeRTOS.org - Documentation, latest information, license and
45
    contact details.
46
 
47
    http://www.SafeRTOS.com - A version that is certified for use in safety
48
    critical systems.
49
 
50
    http://www.OpenRTOS.com - Commercial support, development, porting,
51
    licensing and training services.
52
*/
53
 
54
/* High speed timer test as described in main.c. */
55
 
56
 
57
/* Scheduler includes. */
58
#include "FreeRTOS.h"
59
 
60
/* Demo includes. */
61
#include "partest.h"
62
 
63
/* The number of interrupts to pass before we start looking at the jitter. */
64
#define timerSETTLE_TIME                        5
65
 
66
/* The maximum value the 16bit timer can contain. */
67
#define timerMAX_COUNT                          0xffff
68
 
69
/*-----------------------------------------------------------*/
70
 
71
/*
72
 * Measure the time between this interrupt and the previous interrupt to
73
 * calculate the timing jitter.  Remember the maximum value the jitter has
74
 * ever been calculated to be.
75
 */
76
static void prvCalculateAndStoreJitter( void );
77
 
78
/*-----------------------------------------------------------*/
79
 
80
/* The maximum time (in processor clocks) between two consecutive timer
81
interrupts so far. */
82
unsigned portSHORT usMaxJitter = 0;
83
 
84
/*-----------------------------------------------------------*/
85
 
86
void vSetupTimerTest( unsigned portSHORT usFrequencyHz )
87
{
88
        /* T2 is used to generate interrupts.  T4 is used to provide an accurate
89
        time measurement. */
90
        T2CON = 0;
91
        T4CON = 0;
92
        TMR2 = 0;
93
        TMR4 = 0;
94
 
95
        /* Timer 2 is going to interrupt at usFrequencyHz Hz. */
96
        PR2 = ( unsigned portSHORT ) ( configCPU_CLOCK_HZ / ( unsigned portLONG ) usFrequencyHz );
97
 
98
        /* Timer 4 is going to free run from minimum to maximum value. */
99
        PR4 = ( unsigned portSHORT ) timerMAX_COUNT;
100
 
101
        /* Setup timer 2 interrupt priority to be above the kernel priority so
102
        the timer jitter is not effected by the kernel activity. */
103
        IPC1bits.T2IP = configKERNEL_INTERRUPT_PRIORITY + 1;
104
 
105
        /* Clear the interrupt as a starting condition. */
106
        IFS0bits.T2IF = 0;
107
 
108
        /* Enable the interrupt. */
109
        IEC0bits.T2IE = 1;
110
 
111
        /* Start both timers. */
112
        T2CONbits.TON = 1;
113
        T4CONbits.TON = 1;
114
}
115
/*-----------------------------------------------------------*/
116
 
117
static void prvCalculateAndStoreJitter( void )
118
{
119
static unsigned portSHORT usLastCount = 0, usSettleCount = 0;
120
unsigned portSHORT usThisCount, usDifference;
121
 
122
        /* Capture the timer value as we enter the interrupt. */
123
        usThisCount = TMR4;
124
 
125
        if( usSettleCount >= timerSETTLE_TIME )
126
        {
127
                /* What is the difference between the timer value in this interrupt
128
                and the value from the last interrupt. */
129
                usDifference = usThisCount - usLastCount;
130
 
131
                /* Store the difference in the timer values if it is larger than the
132
                currently stored largest value.  The difference over and above the
133
                expected difference will give the 'jitter' in the processing of these
134
                interrupts. */
135
                if( usDifference > usMaxJitter )
136
                {
137
                        usMaxJitter = usDifference;
138
                }
139
        }
140
        else
141
        {
142
                /* Don't bother storing any values for the first couple of
143
                interrupts. */
144
                usSettleCount++;
145
        }
146
 
147
        /* Remember what the timer value was this time through, so we can calculate
148
        the difference the next time through. */
149
        usLastCount = usThisCount;
150
}
151
/*-----------------------------------------------------------*/
152
 
153
void __attribute__((__interrupt__, auto_psv)) _T2Interrupt( void )
154
{
155
        /* Work out the time between this and the previous interrupt. */
156
        prvCalculateAndStoreJitter();
157
 
158
        /* Clear the timer interrupt. */
159
        IFS0bits.T2IF = 0;
160
}
161
 
162
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.