Subversion Repositories openrisc

# Hey Emacs, this is a -*- makefile -*-

# The purpose of this file is to define the build configuration variables used

# by the generic Makefile. See Makefile header for further information.

# Copyright (c) 2007, Atmel Corporation All rights reserved.

#

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions are met:

#

# 1. Redistributions of source code must retain the above copyright notice, this

# list of conditions and the following disclaimer.

#

# 2. Redistributions in binary form must reproduce the above copyright notice,

# this list of conditions and the following disclaimer in the documentation and/

# or other materials provided with the distribution.

#

# 3. The name of ATMEL may not be used to endorse or promote products derived

# from this software without specific prior written permission.

#

# THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED

# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND

# SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,

# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY

# OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# Base paths

PRJ_PATH = ../..

APPS_PATH = $(PRJ_PATH)/APPLICATIONS

BRDS_PATH = $(PRJ_PATH)/BOARDS

COMP_PATH = $(PRJ_PATH)/COMPONENTS

DRVR_PATH = $(PRJ_PATH)/DRIVERS

SERV_PATH = $(PRJ_PATH)/SERVICES

UTIL_PATH = $(PRJ_PATH)/UTILS

# Demo paths

FREERTOS_PATH = ../../../..

FREERTOS_PORT_PATH = $(FREERTOS_PATH)/Source/portable/GCC/AVR32_UC3

FREERTOS_MEM_PATH = $(FREERTOS_PATH)/Source/portable/MemMang

DEMO_PATH = ../..

ETH_PATH = $(DEMO_PATH)/NETWORK

WEB_PATH = $(ETH_PATH)/BasicWEB

TFTP_PATH = $(ETH_PATH)/BasicTFTP

SMTP_PATH = $(ETH_PATH)/BasicSMTP

LWIP_PATH = $(FREERTOS_PATH)/Demo/Common/ethernet/lwIP

LWIP_PORT_PATH = $(ETH_PATH)/lwip-port/AT32UC3A

# CPU architecture: {ap|uc}

ARCH = uc

# Part: {none|ap7xxx|uc3xxxxx}

PART = uc3a0512

# Flash memories: [{cfi|internal}@address,size]...

FLASH = internal@0x80000000,512Kb

# Clock source to use when programming: [{xtal|extclk|int}]

PROG_CLOCK = xtal

# Device/Platform/Board include path

PLATFORM_INC_PATH = \

  $(BRDS_PATH)/

# Target name: {*.a|*.elf}

TARGET = $(PART)-lwipdemo.elf

# Definitions: [-D name[=definition]...] [-U name...]

# Things that might be added to DEFS:

#   BOARD             Board used: {EVKxxxx}

#   EXT_BOARD         Extension board used (if any): {EXTxxxx}

DEFS = -D BOARD=EVK1100 -D FREERTOS_USED -D HTTP_USED=1 -D TFTP_USED=1 -D SMTP_USED=0

# Include path

INC_PATH = \

  $(UTIL_PATH)/ \

  $(UTIL_PATH)/PREPROCESSOR/ \

  $(SERV_PATH)/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/ \

  $(DRVR_PATH)/INTC/ \

  $(DRVR_PATH)/TC/ \

  $(DRVR_PATH)/PM/ \

  $(DRVR_PATH)/GPIO/ \

  $(DRVR_PATH)/FLASHC/ \

  $(DRVR_PATH)/MACB/ \

  $(DEMO_PATH)/ \

  $(FREERTOS_PATH)/Source/include/ \

  $(FREERTOS_PATH)/Demo/Common/include/ \

  $(FREERTOS_PORT_PATH)/ \

  $(FREERTOS_MEM_PATH)/ \

  $(ETH_PATH)/ \

  $(LWIP_PATH)/include/ \

  $(LWIP_PATH)/include/ipv4/ \

  $(LWIP_PORT_PATH)/ \

  $(WEB_PATH)/ \

  $(TFTP_PATH)/ \

  $(SMTP_PATH)/

# C source files

LWIP_SRC = \

  $(LWIP_PATH)/core/inet.c \

  $(LWIP_PATH)/core/mem.c \

  $(LWIP_PATH)/core/memp.c \

  $(LWIP_PATH)/core/netif.c \

  $(LWIP_PATH)/core/pbuf.c \

  $(LWIP_PATH)/core/raw.c \

  $(LWIP_PATH)/core/stats.c \

  $(LWIP_PATH)/core/sys.c \

  $(LWIP_PATH)/core/tcp.c \

  $(LWIP_PATH)/core/tcp_in.c \

  $(LWIP_PATH)/core/tcp_out.c \

  $(LWIP_PATH)/core/ipv4/ip.c \

  $(LWIP_PATH)/core/ipv4/ip_addr.c \

  $(LWIP_PATH)/core/ipv4/icmp.c \

  $(LWIP_PATH)/api/sockets.c \

  $(LWIP_PATH)/api/tcpip.c \

  $(LWIP_PATH)/api/api_msg.c \

  $(LWIP_PATH)/api/err.c \

  $(LWIP_PATH)/api/api_lib.c \

  $(LWIP_PATH)/netif/etharp.c \

  $(LWIP_PATH)/core/udp.c \

  $(LWIP_PATH)/core/ipv4/ip_frag.c

CSRCS = \

  $(BRDS_PATH)/EVK1100/led.c \

  $(DRVR_PATH)/INTC/intc.c \

  $(DRVR_PATH)/TC/tc.c \

  $(DRVR_PATH)/PM/pm.c \

  $(DRVR_PATH)/MACB/macb.c \

  $(DRVR_PATH)/GPIO/gpio.c \

  $(DRVR_PATH)/FLASHC/flashc.c \

  $(DEMO_PATH)/main.c \

  $(DEMO_PATH)/PARTEST/ParTest.c \

  $(DEMO_PATH)/SERIAL/serial.c \

  $(FREERTOS_PATH)/Source/tasks.c \

  $(FREERTOS_PATH)/Source/queue.c \

  $(FREERTOS_PATH)/Source/list.c \

  $(FREERTOS_PATH)/Source/croutine.c \

  $(FREERTOS_PATH)/Demo/Common/Minimal/flash.c \

  $(FREERTOS_PORT_PATH)/port.c \

  $(FREERTOS_MEM_PATH)/heap_3.c \

  $(LWIP_SRC) \

  $(LWIP_PORT_PATH)/sys_arch.c \

  $(LWIP_PORT_PATH)/ethernetif.c \

  $(WEB_PATH)/BasicWEB.c \

  $(TFTP_PATH)/BasicTFTP.c \

  $(SMTP_PATH)/BasicSMTP.c \

  $(ETH_PATH)/ethernet.c \

  $(DEMO_PATH)/printf-stdarg.c

# Assembler source files

ASSRCS = \

  $(SERV_PATH)/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.S \

  $(FREERTOS_PORT_PATH)/exception.S

# Library path

LIB_PATH =

# Libraries to link with the project

LIBS =

# Linker script file if any

LINKER_SCRIPT = $(UTIL_PATH)/LINKER_SCRIPTS/AT32UC3A/0512/GCC/link_uc3a0512.lds

# Options to request or suppress warnings: [-fsyntax-only] [-pedantic[-errors]] [-w] [-Wwarning...]

# For further details, refer to the chapter "GCC Command Options" of the GCC manual.

WARNINGS = -Wall

# Options for debugging: [-g]...

# For further details, refer to the chapter "GCC Command Options" of the GCC manual.

DEBUG = -g

# Options that control optimization: [-O[0|1|2|3|s]]...

# For further details, refer to the chapter "GCC Command Options" of the GCC manual.

OPTIMIZATION = -O0 -ffunction-sections -fdata-sections

# Extra flags to use when preprocessing

CPP_EXTRA_FLAGS =

# Extra flags to use when compiling

C_EXTRA_FLAGS =

# Extra flags to use when assembling

AS_EXTRA_FLAGS =

# Extra flags to use when linking

LD_EXTRA_FLAGS = -Wl,--gc-sections -Wl,-e,_trampoline

# Documentation path

DOC_PATH = ./DOC/

# Documentation configuration file

DOC_CFG = ./doxyfile.doxygen