OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [lwIP_Demo_Rowley_ARM7/] [lwipopts.h] - Blame information for rev 589

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 583 jeremybenn
/*
2
 * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
3
 * All rights reserved.
4
 *
5
 * Redistribution and use in source and binary forms, with or without modification,
6
 * are permitted provided that the following conditions are met:
7
 *
8
 * 1. Redistributions of source code must retain the above copyright notice,
9
 *    this list of conditions and the following disclaimer.
10
 * 2. Redistributions in binary form must reproduce the above copyright notice,
11
 *    this list of conditions and the following disclaimer in the documentation
12
 *    and/or other materials provided with the distribution.
13
 * 3. The name of the author may not be used to endorse or promote products
14
 *    derived from this software without specific prior written permission.
15
 *
16
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
17
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
18
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
19
 * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
20
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
21
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
22
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
23
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
24
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
25
 * OF SUCH DAMAGE.
26
 *
27
 * This file is part of the lwIP TCP/IP stack.
28
 *
29
 * Author: Adam Dunkels <adam@sics.se>
30
 *
31
 */
32
#ifndef __LWIPOPTS_H__
33
#define __LWIPOPTS_H__
34
 
35
#define LWIP_NOASSERT 1 // To suppress some errors for now (no debug output)
36
#define SYS_LIGHTWEIGHT_PROT            1
37
 
38
#define TCPIP_THREAD_PRIO       3
39
 
40
/* ---------- Memory options ---------- */
41
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
42
   lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
43
   byte alignment -> define MEM_ALIGNMENT to 2. */
44
#define MEM_ALIGNMENT           4
45
 
46
/* MEM_SIZE: the size of the heap memory. If the application will send
47
a lot of data that needs to be copied, this should be set high. */
48
#define MEM_SIZE                2000
49
 
50
/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
51
   sends a lot of data out of ROM (or other static memory), this
52
   should be set high. */
53
#define MEMP_NUM_PBUF           20
54
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
55
   per active UDP "connection". */
56
#define MEMP_NUM_UDP_PCB        4
57
/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
58
   connections. */
59
#define MEMP_NUM_TCP_PCB        10
60
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
61
   connections. */
62
#define MEMP_NUM_TCP_PCB_LISTEN 8
63
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
64
   segments. */
65
#define MEMP_NUM_TCP_SEG        8
66
/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active
67
   timeouts. */
68
#define MEMP_NUM_SYS_TIMEOUT    3
69
 
70
 
71
/* The following four are used only with the sequential API and can be
72
   set to 0 if the application only will use the raw API. */
73
/* MEMP_NUM_NETBUF: the number of struct netbufs. */
74
#define MEMP_NUM_NETBUF         4
75
/* MEMP_NUM_NETCONN: the number of struct netconns. */
76
#define MEMP_NUM_NETCONN        4
77
/* MEMP_NUM_APIMSG: the number of struct api_msg, used for
78
   communication between the TCP/IP stack and the sequential
79
   programs. */
80
#define MEMP_NUM_API_MSG        8
81
/* MEMP_NUM_TCPIPMSG: the number of struct tcpip_msg, which is used
82
   for sequential API communication and incoming packets. Used in
83
   src/api/tcpip.c. */
84
#define MEMP_NUM_TCPIP_MSG      8
85
 
86
/* These two control is reclaimer functions should be compiled
87
   in. Should always be turned on (1). */
88
#define MEM_RECLAIM             1
89
#define MEMP_RECLAIM            1
90
 
91
/* ---------- Pbuf options ---------- */
92
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */
93
#define PBUF_POOL_SIZE          4
94
 
95
/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
96
#define PBUF_POOL_BUFSIZE       1500
97
 
98
/* PBUF_LINK_HLEN: the number of bytes that should be allocated for a
99
   link level header. */
100
#define PBUF_LINK_HLEN          16
101
 
102
/* ---------- TCP options ---------- */
103
#define LWIP_TCP                1
104
#define TCP_TTL                 255
105
 
106
/* Controls if TCP should queue segments that arrive out of
107
   order. Define to 0 if your device is low on memory. */
108
#define TCP_QUEUE_OOSEQ         1
109
 
110
/* TCP Maximum segment size. */
111
#define TCP_MSS                 1500
112
 
113
/* TCP sender buffer space (bytes). */
114
#define TCP_SND_BUF             1500
115
 
116
/* TCP sender buffer space (pbufs). This must be at least = 2 *
117
   TCP_SND_BUF/TCP_MSS for things to work. */
118
#define TCP_SND_QUEUELEN        6 * TCP_SND_BUF/TCP_MSS
119
 
120
/* TCP receive window. */
121
#define TCP_WND                 1500
122
 
123
/* Maximum number of retransmissions of data segments. */
124
#define TCP_MAXRTX              12
125
 
126
/* Maximum number of retransmissions of SYN segments. */
127
#define TCP_SYNMAXRTX           4
128
 
129
/* ---------- ARP options ---------- */
130
#define ARP_TABLE_SIZE 10
131
#define ARP_QUEUEING 1
132
 
133
/* ---------- IP options ---------- */
134
/* Define IP_FORWARD to 1 if you wish to have the ability to forward
135
   IP packets across network interfaces. If you are going to run lwIP
136
   on a device with only one network interface, define this to 0. */
137
#define IP_FORWARD              1
138
 
139
/* If defined to 1, IP options are allowed (but not parsed). If
140
   defined to 0, all packets with IP options are dropped. */
141
#define IP_OPTIONS              1
142
 
143
/* ---------- ICMP options ---------- */
144
#define ICMP_TTL                255
145
 
146
 
147
/* ---------- DHCP options ---------- */
148
/* Define LWIP_DHCP to 1 if you want DHCP configuration of
149
   interfaces. DHCP is not implemented in lwIP 0.5.1, however, so
150
   turning this on does currently not work. */
151
#define LWIP_DHCP               0
152
 
153
/* 1 if you want to do an ARP check on the offered address
154
   (recommended). */
155
#define DHCP_DOES_ARP_CHECK     1
156
 
157
/* ---------- UDP options ---------- */
158
#define LWIP_UDP                1
159
#define UDP_TTL                 255
160
 
161
 
162
/* ---------- Statistics options ---------- */
163
#define STATS
164
 
165
#ifdef STATS
166
#define LINK_STATS 1
167
#define IP_STATS   1
168
#define ICMP_STATS 1
169
#define UDP_STATS  1
170
#define TCP_STATS  1
171
#define MEM_STATS  1
172
#define MEMP_STATS 1
173
#define PBUF_STATS 1
174
#define SYS_STATS  1
175
#endif /* STATS */
176
 
177
#define LWIP_PROVIDE_ERRNO 1
178
 
179
#endif /* __LWIPOPTS_H__ */

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.