Subversion Repositories openrisc_2011-10-31

/*

    FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd.

    ***************************************************************************

    *                                                                         *

    * If you are:                                                             *

    *                                                                         *

    *    + New to FreeRTOS,                                                   *

    *    + Wanting to learn FreeRTOS or multitasking in general quickly       *

    *    + Looking for basic training,                                        *

    *    + Wanting to improve your FreeRTOS skills and productivity           *

    *                                                                         *

    * then take a look at the FreeRTOS books - available as PDF or paperback  *

    *                                                                         *

    *        "Using the FreeRTOS Real Time Kernel - a Practical Guide"        *

    *                  http://www.FreeRTOS.org/Documentation                  *

    *                                                                         *

    * A pdf reference manual is also available.  Both are usually delivered   *

    * to your inbox within 20 minutes to two hours when purchased between 8am *

    * and 8pm GMT (although please allow up to 24 hours in case of            *

    * exceptional circumstances).  Thank you for your support!                *

    *                                                                         *

    ***************************************************************************

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under

    the terms of the GNU General Public License (version 2) as published by the

    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.

    ***NOTE*** The exception to the GPL is included to allow you to distribute

    a combined work that includes FreeRTOS without being obliged to provide the

    source code for proprietary components outside of the FreeRTOS kernel.

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT

    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

    more details. You should have received a copy of the GNU General Public

    License and the FreeRTOS license exception along with FreeRTOS; if not it

    can be viewed here: http://www.freertos.org/a00114.html and also obtained

    by writing to Richard Barry, contact details for whom are available on the

    FreeRTOS WEB site.

    1 tab == 4 spaces!

    http://www.FreeRTOS.org - Documentation, latest information, license and

    contact details.

    http://www.SafeRTOS.com - A version that is certified for use in safety

    critical systems.

    http://www.OpenRTOS.com - Commercial support, development, porting,

    licensing and training services.

*/

/*

Changes from V1.00:

        + Call to taskYIELD() from within tick ISR has been replaced by the more

          efficient portSWITCH_CONTEXT().

        + ISR function definitions renamed to include the prv prefix.

Changes from V2.6.1

        + Replaced the sUsingPreemption variable with the configUSE_PREEMPTION

          macro to be consistent with the later ports.

*/

/*-----------------------------------------------------------

 * Implementation of functions defined in portable.h for the Flashlite 186

 * port.

 *----------------------------------------------------------*/

#include <dos.h>

#include <stdlib.h>

#include <setjmp.h>

#include "FreeRTOS.h"

#include "task.h"

#include "portasm.h"

/*lint -e950 Non ANSI reserved words okay in this file only. */

#define portTIMER_EOI_TYPE              ( 8 )

#define portRESET_PIC()                 portOUTPUT_WORD( ( unsigned short ) 0xff22, portTIMER_EOI_TYPE )

#define portTIMER_INT_NUMBER    0x12

#define portTIMER_1_CONTROL_REGISTER    ( ( unsigned short ) 0xff5e )

#define portTIMER_0_CONTROL_REGISTER    ( ( unsigned short ) 0xff56 )

#define portTIMER_INTERRUPT_ENABLE              ( ( unsigned short ) 0x2000 )

/* Setup the hardware to generate the required tick frequency. */

static void prvSetTickFrequency( unsigned long ulTickRateHz );

/* Set the hardware back to the state as per before the scheduler started. */

static void prvExitFunction( void );

/* The ISR used depends on whether the preemptive or cooperative scheduler

is being used. */

#if( configUSE_PREEMPTION == 1 )

        /* Tick service routine used by the scheduler when preemptive scheduling is

        being used. */

        static void __interrupt __far prvPreemptiveTick( void );

#else

        /* Tick service routine used by the scheduler when cooperative scheduling is

        being used. */

        static void __interrupt __far prvNonPreemptiveTick( void );

#endif

/* Trap routine used by taskYIELD() to manually cause a context switch. */

static void __interrupt __far prvYieldProcessor( void );

/*lint -e956 File scopes necessary here. */

/* Set true when the vectors are set so the scheduler will service the tick. */

static portBASE_TYPE xSchedulerRunning = pdFALSE;

/* Points to the original routine installed on the vector we use for manual

context switches.  This is then used to restore the original routine during

prvExitFunction(). */

static void ( __interrupt __far *pxOldSwitchISR )();

/* Used to restore the original DOS context when the scheduler is ended. */

static jmp_buf xJumpBuf;

/*lint +e956 */

/*-----------------------------------------------------------*/

portBASE_TYPE xPortStartScheduler( void )

{

        /* This is called with interrupts already disabled. */

        /* Remember what was on the interrupts we are going to use

        so we can put them back later if required. */

        pxOldSwitchISR = _dos_getvect( portSWITCH_INT_NUMBER );

        /* Put our manual switch (yield) function on a known

        vector. */

        _dos_setvect( portSWITCH_INT_NUMBER, prvYieldProcessor );

        #if( configUSE_PREEMPTION == 1 )

        {

                /* Put our tick switch function on the timer interrupt. */

                _dos_setvect( portTIMER_INT_NUMBER, prvPreemptiveTick );

        }

        #else

        {

                /* We want the timer interrupt to just increment the tick count. */

                _dos_setvect( portTIMER_INT_NUMBER, prvNonPreemptiveTick );

        }

        #endif

        prvSetTickFrequency( configTICK_RATE_HZ );

        /* Clean up function if we want to return to DOS. */

        if( setjmp( xJumpBuf ) != 0 )

        {

                prvExitFunction();

                xSchedulerRunning = pdFALSE;

        }

        else

        {

                xSchedulerRunning = pdTRUE;

                /* Kick off the scheduler by setting up the context of the first task. */

                portFIRST_CONTEXT();

        }

        return xSchedulerRunning;

}

/*-----------------------------------------------------------*/

/* The ISR used depends on whether the preemptive or cooperative scheduler

is being used. */

#if( configUSE_PREEMPTION == 1 )

        static void __interrupt __far prvPreemptiveTick( void )

        {

                /* Get the scheduler to update the task states following the tick. */

                vTaskIncrementTick();

                /* Switch in the context of the next task to be run. */

                portSWITCH_CONTEXT();

                /* Reset the PIC ready for the next time. */

                portRESET_PIC();

        }

#else

        static void __interrupt __far prvNonPreemptiveTick( void )

        {

                /* Same as preemptive tick, but the cooperative scheduler is being used

                so we don't have to switch in the context of the next task. */

                vTaskIncrementTick();

                portRESET_PIC();

        }

#endif

/*-----------------------------------------------------------*/

static void __interrupt __far prvYieldProcessor( void )

{

        /* Switch in the context of the next task to be run. */

        portSWITCH_CONTEXT();

}

/*-----------------------------------------------------------*/

void vPortEndScheduler( void )

{

        /* Jump back to the processor state prior to starting the

        scheduler.  This means we are not going to be using a

        task stack frame so the task can be deleted. */

        longjmp( xJumpBuf, 1 );

}

/*-----------------------------------------------------------*/

static void prvExitFunction( void )

{

const unsigned short usTimerDisable = 0x0000;

unsigned short usTimer0Control;

        /* Interrupts should be disabled here anyway - but no

        harm in making sure. */

        portDISABLE_INTERRUPTS();

        if( xSchedulerRunning == pdTRUE )

        {

                /* Put back the switch interrupt routines that was in place

                before the scheduler started. */

                _dos_setvect( portSWITCH_INT_NUMBER, pxOldSwitchISR );

        }

        /* Disable the timer used for the tick to ensure the scheduler is

        not called before restoring interrupts.  There was previously nothing

        on this timer so there is no old ISR to restore. */

        portOUTPUT_WORD( portTIMER_1_CONTROL_REGISTER, usTimerDisable );

        /* Restart the DOS tick. */

        usTimer0Control = portINPUT_WORD( portTIMER_0_CONTROL_REGISTER );

        usTimer0Control |= portTIMER_INTERRUPT_ENABLE;

        portOUTPUT_WORD( portTIMER_0_CONTROL_REGISTER, usTimer0Control );

        portENABLE_INTERRUPTS();

        /* This will free up all the memory used by the scheduler.

        exiting back to dos with INT21 AH=4CH will do this anyway so

        it is not necessary to call this. */

        vTaskCleanUpResources();

}

/*-----------------------------------------------------------*/

static void prvSetTickFrequency( unsigned long ulTickRateHz )

{

const unsigned short usMaxCountRegister = 0xff5a;

const unsigned short usTimerPriorityRegister = 0xff32;

const unsigned short usTimerEnable = 0xC000;

const unsigned short usRetrigger = 0x0001;

const unsigned short usTimerHighPriority = 0x0000;

unsigned short usTimer0Control;

/* ( CPU frequency / 4 ) / clock 2 max count [inpw( 0xff62 ) = 7] */

const unsigned long ulClockFrequency = ( unsigned long ) 0x7f31a0UL;

unsigned long ulTimerCount = ulClockFrequency / ulTickRateHz;

        portOUTPUT_WORD( portTIMER_1_CONTROL_REGISTER, usTimerEnable | portTIMER_INTERRUPT_ENABLE | usRetrigger );

        portOUTPUT_WORD( usMaxCountRegister, ( unsigned short ) ulTimerCount );

        portOUTPUT_WORD( usTimerPriorityRegister, usTimerHighPriority );

        /* Stop the DOS tick - don't do this if you want to maintain a TOD clock. */

        usTimer0Control = portINPUT_WORD( portTIMER_0_CONTROL_REGISTER );

        usTimer0Control &= ~portTIMER_INTERRUPT_ENABLE;

        portOUTPUT_WORD( portTIMER_0_CONTROL_REGISTER, usTimer0Control );

}

/*lint +e950 */