OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Source/] [portable/] [IAR/] [AtmelSAM7S64/] [AT91SAM7X128_inc.h] - Blame information for rev 583

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 572 jeremybenn 
//  ----------------------------------------------------------------------------
2 
//          ATMEL Microcontroller Software Support  -  ROUSSET  -
3 
//  ----------------------------------------------------------------------------
4 
//  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
5 
//  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
6 
//  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
7 
//  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
8 
//  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
9 
//  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
10 
//  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
11 
//  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
12 
//  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
13 
//  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
14 
//  ----------------------------------------------------------------------------
15 
// File Name           : AT91SAM7X128.h
16 
// Object              : AT91SAM7X128 definitions
17 
// Generated           : AT91 SW Application Group  05/20/2005 (16:22:23)
18 
//
19 
// CVS Reference       : /AT91SAM7X128.pl/1.14/Tue May 10 12:12:05 2005//
20 
// CVS Reference       : /SYS_SAM7X.pl/1.3/Tue Feb  1 17:01:43 2005//
21 
// CVS Reference       : /MC_SAM7X.pl/1.2/Fri May 20 14:13:04 2005//
22 
// CVS Reference       : /PMC_SAM7X.pl/1.4/Tue Feb  8 13:58:10 2005//
23 
// CVS Reference       : /RSTC_SAM7X.pl/1.1/Tue Feb  1 16:16:26 2005//
24 
// CVS Reference       : /UDP_SAM7X.pl/1.1/Tue May 10 11:35:35 2005//
25 
// CVS Reference       : /PWM_SAM7X.pl/1.1/Tue May 10 11:53:07 2005//
26 
// CVS Reference       : /AIC_6075B.pl/1.3/Fri May 20 14:01:30 2005//
27 
// CVS Reference       : /PIO_6057A.pl/1.2/Thu Feb  3 10:18:28 2005//
28 
// CVS Reference       : /RTTC_6081A.pl/1.2/Tue Nov  9 14:43:58 2004//
29 
// CVS Reference       : /PITC_6079A.pl/1.2/Tue Nov  9 14:43:56 2004//
30 
// CVS Reference       : /WDTC_6080A.pl/1.3/Tue Nov  9 14:44:00 2004//
31 
// CVS Reference       : /VREG_6085B.pl/1.1/Tue Feb  1 16:05:48 2005//
32 
// CVS Reference       : /PDC_6074C.pl/1.2/Thu Feb  3 08:48:54 2005//
33 
// CVS Reference       : /DBGU_6059D.pl/1.1/Mon Jan 31 13:15:32 2005//
34 
// CVS Reference       : /SPI_6088D.pl/1.3/Fri May 20 14:08:59 2005//
35 
// CVS Reference       : /US_6089C.pl/1.1/Mon Jul 12 18:23:26 2004//
36 
// CVS Reference       : /SSC_6078A.pl/1.1/Tue Jul 13 07:45:40 2004//
37 
// CVS Reference       : /TWI_6061A.pl/1.1/Tue Jul 13 07:38:06 2004//
38 
// CVS Reference       : /TC_6082A.pl/1.7/Fri Mar 11 12:52:17 2005//
39 
// CVS Reference       : /CAN_6019B.pl/1.1/Tue Mar  8 12:42:22 2005//
40 
// CVS Reference       : /EMACB_6119A.pl/1.5/Thu Feb  3 15:52:04 2005//
41 
// CVS Reference       : /ADC_6051C.pl/1.1/Fri Oct 17 09:12:38 2003//
42 
// CVS Reference       : /AES_6149A.pl/1.10/Mon Feb  7 09:44:25 2005//
43 
// CVS Reference       : /DES3_6150A.pl/1.1/Mon Jan 17 08:34:31 2005//
44 
//  ----------------------------------------------------------------------------
45 
 
46 
// Hardware register definition
47 
 
48 
// *****************************************************************************
49 
//              SOFTWARE API DEFINITION  FOR System Peripherals
50 
// *****************************************************************************
51 
 
52 
// *****************************************************************************
53 
//              SOFTWARE API DEFINITION  FOR Advanced Interrupt Controller
54 
// *****************************************************************************
55 
// *** Register offset in AT91S_AIC structure ***
56 
#define AIC_SMR         ( 0) // Source Mode Register
57 
#define AIC_SVR         (128) // Source Vector Register
58 
#define AIC_IVR         (256) // IRQ Vector Register
59 
#define AIC_FVR         (260) // FIQ Vector Register
60 
#define AIC_ISR         (264) // Interrupt Status Register
61 
#define AIC_IPR         (268) // Interrupt Pending Register
62 
#define AIC_IMR         (272) // Interrupt Mask Register
63 
#define AIC_CISR        (276) // Core Interrupt Status Register
64 
#define AIC_IECR        (288) // Interrupt Enable Command Register
65 
#define AIC_IDCR        (292) // Interrupt Disable Command Register
66 
#define AIC_ICCR        (296) // Interrupt Clear Command Register
67 
#define AIC_ISCR        (300) // Interrupt Set Command Register
68 
#define AIC_EOICR       (304) // End of Interrupt Command Register
69 
#define AIC_SPU         (308) // Spurious Vector Register
70 
#define AIC_DCR         (312) // Debug Control Register (Protect)
71 
#define AIC_FFER        (320) // Fast Forcing Enable Register
72 
#define AIC_FFDR        (324) // Fast Forcing Disable Register
73 
#define AIC_FFSR        (328) // Fast Forcing Status Register
74 
// -------- AIC_SMR : (AIC Offset: 0x0) Control Register --------
75 
#define AT91C_AIC_PRIOR           (0x7 <<  0) // (AIC) Priority Level
76 
#define         AT91C_AIC_PRIOR_LOWEST               (0x0) // (AIC) Lowest priority level
77 
#define         AT91C_AIC_PRIOR_HIGHEST              (0x7) // (AIC) Highest priority level
78 
#define AT91C_AIC_SRCTYPE         (0x3 <<  5) // (AIC) Interrupt Source Type
79 
#define         AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL       (0x0 <<  5) // (AIC) Internal Sources Code Label High-level Sensitive
80 
#define         AT91C_AIC_SRCTYPE_EXT_LOW_LEVEL        (0x0 <<  5) // (AIC) External Sources Code Label Low-level Sensitive
81 
#define         AT91C_AIC_SRCTYPE_INT_POSITIVE_EDGE    (0x1 <<  5) // (AIC) Internal Sources Code Label Positive Edge triggered
82 
#define         AT91C_AIC_SRCTYPE_EXT_NEGATIVE_EDGE    (0x1 <<  5) // (AIC) External Sources Code Label Negative Edge triggered
83 
#define         AT91C_AIC_SRCTYPE_HIGH_LEVEL           (0x2 <<  5) // (AIC) Internal Or External Sources Code Label High-level Sensitive
84 
#define         AT91C_AIC_SRCTYPE_POSITIVE_EDGE        (0x3 <<  5) // (AIC) Internal Or External Sources Code Label Positive Edge triggered
85 
// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register --------
86 
#define AT91C_AIC_NFIQ            (0x1 <<  0) // (AIC) NFIQ Status
87 
#define AT91C_AIC_NIRQ            (0x1 <<  1) // (AIC) NIRQ Status
88 
// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) --------
89 
#define AT91C_AIC_DCR_PROT        (0x1 <<  0) // (AIC) Protection Mode
90 
#define AT91C_AIC_DCR_GMSK        (0x1 <<  1) // (AIC) General Mask
91 
 
92 
// *****************************************************************************
93 
//              SOFTWARE API DEFINITION  FOR Peripheral DMA Controller
94 
// *****************************************************************************
95 
// *** Register offset in AT91S_PDC structure ***
96 
#define PDC_RPR         ( 0) // Receive Pointer Register
97 
#define PDC_RCR         ( 4) // Receive Counter Register
98 
#define PDC_TPR         ( 8) // Transmit Pointer Register
99 
#define PDC_TCR         (12) // Transmit Counter Register
100 
#define PDC_RNPR        (16) // Receive Next Pointer Register
101 
#define PDC_RNCR        (20) // Receive Next Counter Register
102 
#define PDC_TNPR        (24) // Transmit Next Pointer Register
103 
#define PDC_TNCR        (28) // Transmit Next Counter Register
104 
#define PDC_PTCR        (32) // PDC Transfer Control Register
105 
#define PDC_PTSR        (36) // PDC Transfer Status Register
106 
// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register --------
107 
#define AT91C_PDC_RXTEN           (0x1 <<  0) // (PDC) Receiver Transfer Enable
108 
#define AT91C_PDC_RXTDIS          (0x1 <<  1) // (PDC) Receiver Transfer Disable
109 
#define AT91C_PDC_TXTEN           (0x1 <<  8) // (PDC) Transmitter Transfer Enable
110 
#define AT91C_PDC_TXTDIS          (0x1 <<  9) // (PDC) Transmitter Transfer Disable
111 
// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register --------
112 
 
113 
// *****************************************************************************
114 
//              SOFTWARE API DEFINITION  FOR Debug Unit
115 
// *****************************************************************************
116 
// *** Register offset in AT91S_DBGU structure ***
117 
#define DBGU_CR         ( 0) // Control Register
118 
#define DBGU_MR         ( 4) // Mode Register
119 
#define DBGU_IER        ( 8) // Interrupt Enable Register
120 
#define DBGU_IDR        (12) // Interrupt Disable Register
121 
#define DBGU_IMR        (16) // Interrupt Mask Register
122 
#define DBGU_CSR        (20) // Channel Status Register
123 
#define DBGU_RHR        (24) // Receiver Holding Register
124 
#define DBGU_THR        (28) // Transmitter Holding Register
125 
#define DBGU_BRGR       (32) // Baud Rate Generator Register
126 
#define DBGU_CIDR       (64) // Chip ID Register
127 
#define DBGU_EXID       (68) // Chip ID Extension Register
128 
#define DBGU_FNTR       (72) // Force NTRST Register
129 
#define DBGU_RPR        (256) // Receive Pointer Register
130 
#define DBGU_RCR        (260) // Receive Counter Register
131 
#define DBGU_TPR        (264) // Transmit Pointer Register
132 
#define DBGU_TCR        (268) // Transmit Counter Register
133 
#define DBGU_RNPR       (272) // Receive Next Pointer Register
134 
#define DBGU_RNCR       (276) // Receive Next Counter Register
135 
#define DBGU_TNPR       (280) // Transmit Next Pointer Register
136 
#define DBGU_TNCR       (284) // Transmit Next Counter Register
137 
#define DBGU_PTCR       (288) // PDC Transfer Control Register
138 
#define DBGU_PTSR       (292) // PDC Transfer Status Register
139 
// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register --------
140 
#define AT91C_US_RSTRX            (0x1 <<  2) // (DBGU) Reset Receiver
141 
#define AT91C_US_RSTTX            (0x1 <<  3) // (DBGU) Reset Transmitter
142 
#define AT91C_US_RXEN             (0x1 <<  4) // (DBGU) Receiver Enable
143 
#define AT91C_US_RXDIS            (0x1 <<  5) // (DBGU) Receiver Disable
144 
#define AT91C_US_TXEN             (0x1 <<  6) // (DBGU) Transmitter Enable
145 
#define AT91C_US_TXDIS            (0x1 <<  7) // (DBGU) Transmitter Disable
146 
#define AT91C_US_RSTSTA           (0x1 <<  8) // (DBGU) Reset Status Bits
147 
// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register --------
148 
#define AT91C_US_PAR              (0x7 <<  9) // (DBGU) Parity type
149 
#define         AT91C_US_PAR_EVEN                 (0x0 <<  9) // (DBGU) Even Parity
150 
#define         AT91C_US_PAR_ODD                  (0x1 <<  9) // (DBGU) Odd Parity
151 
#define         AT91C_US_PAR_SPACE                (0x2 <<  9) // (DBGU) Parity forced to 0 (Space)
152 
#define         AT91C_US_PAR_MARK                 (0x3 <<  9) // (DBGU) Parity forced to 1 (Mark)
153 
#define         AT91C_US_PAR_NONE                 (0x4 <<  9) // (DBGU) No Parity
154 
#define         AT91C_US_PAR_MULTI_DROP           (0x6 <<  9) // (DBGU) Multi-drop mode
155 
#define AT91C_US_CHMODE           (0x3 << 14) // (DBGU) Channel Mode
156 
#define         AT91C_US_CHMODE_NORMAL               (0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART.
157 
#define         AT91C_US_CHMODE_AUTO                 (0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin.
158 
#define         AT91C_US_CHMODE_LOCAL                (0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
159 
#define         AT91C_US_CHMODE_REMOTE               (0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin.
160 
// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register --------
161 
#define AT91C_US_RXRDY            (0x1 <<  0) // (DBGU) RXRDY Interrupt
162 
#define AT91C_US_TXRDY            (0x1 <<  1) // (DBGU) TXRDY Interrupt
163 
#define AT91C_US_ENDRX            (0x1 <<  3) // (DBGU) End of Receive Transfer Interrupt
164 
#define AT91C_US_ENDTX            (0x1 <<  4) // (DBGU) End of Transmit Interrupt
165 
#define AT91C_US_OVRE             (0x1 <<  5) // (DBGU) Overrun Interrupt
166 
#define AT91C_US_FRAME            (0x1 <<  6) // (DBGU) Framing Error Interrupt
167 
#define AT91C_US_PARE             (0x1 <<  7) // (DBGU) Parity Error Interrupt
168 
#define AT91C_US_TXEMPTY          (0x1 <<  9) // (DBGU) TXEMPTY Interrupt
169 
#define AT91C_US_TXBUFE           (0x1 << 11) // (DBGU) TXBUFE Interrupt
170 
#define AT91C_US_RXBUFF           (0x1 << 12) // (DBGU) RXBUFF Interrupt
171 
#define AT91C_US_COMM_TX          (0x1 << 30) // (DBGU) COMM_TX Interrupt
172 
#define AT91C_US_COMM_RX          (0x1 << 31) // (DBGU) COMM_RX Interrupt
173 
// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register --------
174 
// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register --------
175 
// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register --------
176 
// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register --------
177 
#define AT91C_US_FORCE_NTRST      (0x1 <<  0) // (DBGU) Force NTRST in JTAG
178 
 
179 
// *****************************************************************************
180 
//              SOFTWARE API DEFINITION  FOR Parallel Input Output Controler
181 
// *****************************************************************************
182 
// *** Register offset in AT91S_PIO structure ***
183 
#define PIO_PER         ( 0) // PIO Enable Register
184 
#define PIO_PDR         ( 4) // PIO Disable Register
185 
#define PIO_PSR         ( 8) // PIO Status Register
186 
#define PIO_OER         (16) // Output Enable Register
187 
#define PIO_ODR         (20) // Output Disable Registerr
188 
#define PIO_OSR         (24) // Output Status Register
189 
#define PIO_IFER        (32) // Input Filter Enable Register
190 
#define PIO_IFDR        (36) // Input Filter Disable Register
191 
#define PIO_IFSR        (40) // Input Filter Status Register
192 
#define PIO_SODR        (48) // Set Output Data Register
193 
#define PIO_CODR        (52) // Clear Output Data Register
194 
#define PIO_ODSR        (56) // Output Data Status Register
195 
#define PIO_PDSR        (60) // Pin Data Status Register
196 
#define PIO_IER         (64) // Interrupt Enable Register
197 
#define PIO_IDR         (68) // Interrupt Disable Register
198 
#define PIO_IMR         (72) // Interrupt Mask Register
199 
#define PIO_ISR         (76) // Interrupt Status Register
200 
#define PIO_MDER        (80) // Multi-driver Enable Register
201 
#define PIO_MDDR        (84) // Multi-driver Disable Register
202 
#define PIO_MDSR        (88) // Multi-driver Status Register
203 
#define PIO_PPUDR       (96) // Pull-up Disable Register
204 
#define PIO_PPUER       (100) // Pull-up Enable Register
205 
#define PIO_PPUSR       (104) // Pull-up Status Register
206 
#define PIO_ASR         (112) // Select A Register
207 
#define PIO_BSR         (116) // Select B Register
208 
#define PIO_ABSR        (120) // AB Select Status Register
209 
#define PIO_OWER        (160) // Output Write Enable Register
210 
#define PIO_OWDR        (164) // Output Write Disable Register
211 
#define PIO_OWSR        (168) // Output Write Status Register
212 
 
213 
// *****************************************************************************
214 
//              SOFTWARE API DEFINITION  FOR Clock Generator Controler
215 
// *****************************************************************************
216 
// *** Register offset in AT91S_CKGR structure ***
217 
#define CKGR_MOR        ( 0) // Main Oscillator Register
218 
#define CKGR_MCFR       ( 4) // Main Clock  Frequency Register
219 
#define CKGR_PLLR       (12) // PLL Register
220 
// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register --------
221 
#define AT91C_CKGR_MOSCEN         (0x1 <<  0) // (CKGR) Main Oscillator Enable
222 
#define AT91C_CKGR_OSCBYPASS      (0x1 <<  1) // (CKGR) Main Oscillator Bypass
223 
#define AT91C_CKGR_OSCOUNT        (0xFF <<  8) // (CKGR) Main Oscillator Start-up Time
224 
// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register --------
225 
#define AT91C_CKGR_MAINF          (0xFFFF <<  0) // (CKGR) Main Clock Frequency
226 
#define AT91C_CKGR_MAINRDY        (0x1 << 16) // (CKGR) Main Clock Ready
227 
// -------- CKGR_PLLR : (CKGR Offset: 0xc) PLL B Register --------
228 
#define AT91C_CKGR_DIV            (0xFF <<  0) // (CKGR) Divider Selected
229 
#define         AT91C_CKGR_DIV_0                    (0x0) // (CKGR) Divider output is 0
230 
#define         AT91C_CKGR_DIV_BYPASS               (0x1) // (CKGR) Divider is bypassed
231 
#define AT91C_CKGR_PLLCOUNT       (0x3F <<  8) // (CKGR) PLL Counter
232 
#define AT91C_CKGR_OUT            (0x3 << 14) // (CKGR) PLL Output Frequency Range
233 
#define         AT91C_CKGR_OUT_0                    (0x0 << 14) // (CKGR) Please refer to the PLL datasheet
234 
#define         AT91C_CKGR_OUT_1                    (0x1 << 14) // (CKGR) Please refer to the PLL datasheet
235 
#define         AT91C_CKGR_OUT_2                    (0x2 << 14) // (CKGR) Please refer to the PLL datasheet
236 
#define         AT91C_CKGR_OUT_3                    (0x3 << 14) // (CKGR) Please refer to the PLL datasheet
237 
#define AT91C_CKGR_MUL            (0x7FF << 16) // (CKGR) PLL Multiplier
238 
#define AT91C_CKGR_USBDIV         (0x3 << 28) // (CKGR) Divider for USB Clocks
239 
#define         AT91C_CKGR_USBDIV_0                    (0x0 << 28) // (CKGR) Divider output is PLL clock output
240 
#define         AT91C_CKGR_USBDIV_1                    (0x1 << 28) // (CKGR) Divider output is PLL clock output divided by 2
241 
#define         AT91C_CKGR_USBDIV_2                    (0x2 << 28) // (CKGR) Divider output is PLL clock output divided by 4
242 
 
243 
// *****************************************************************************
244 
//              SOFTWARE API DEFINITION  FOR Power Management Controler
245 
// *****************************************************************************
246 
// *** Register offset in AT91S_PMC structure ***
247 
#define PMC_SCER        ( 0) // System Clock Enable Register
248 
#define PMC_SCDR        ( 4) // System Clock Disable Register
249 
#define PMC_SCSR        ( 8) // System Clock Status Register
250 
#define PMC_PCER        (16) // Peripheral Clock Enable Register
251 
#define PMC_PCDR        (20) // Peripheral Clock Disable Register
252 
#define PMC_PCSR        (24) // Peripheral Clock Status Register
253 
#define PMC_MOR         (32) // Main Oscillator Register
254 
#define PMC_MCFR        (36) // Main Clock  Frequency Register
255 
#define PMC_PLLR        (44) // PLL Register
256 
#define PMC_MCKR        (48) // Master Clock Register
257 
#define PMC_PCKR        (64) // Programmable Clock Register
258 
#define PMC_IER         (96) // Interrupt Enable Register
259 
#define PMC_IDR         (100) // Interrupt Disable Register
260 
#define PMC_SR          (104) // Status Register
261 
#define PMC_IMR         (108) // Interrupt Mask Register
262 
// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register --------
263 
#define AT91C_PMC_PCK             (0x1 <<  0) // (PMC) Processor Clock
264 
#define AT91C_PMC_UDP             (0x1 <<  7) // (PMC) USB Device Port Clock
265 
#define AT91C_PMC_PCK0            (0x1 <<  8) // (PMC) Programmable Clock Output
266 
#define AT91C_PMC_PCK1            (0x1 <<  9) // (PMC) Programmable Clock Output
267 
#define AT91C_PMC_PCK2            (0x1 << 10) // (PMC) Programmable Clock Output
268 
#define AT91C_PMC_PCK3            (0x1 << 11) // (PMC) Programmable Clock Output
269 
// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register --------
270 
// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register --------
271 
// -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register --------
272 
// -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register --------
273 
// -------- CKGR_PLLR : (PMC Offset: 0x2c) PLL B Register --------
274 
// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register --------
275 
#define AT91C_PMC_CSS             (0x3 <<  0) // (PMC) Programmable Clock Selection
276 
#define         AT91C_PMC_CSS_SLOW_CLK             (0x0) // (PMC) Slow Clock is selected
277 
#define         AT91C_PMC_CSS_MAIN_CLK             (0x1) // (PMC) Main Clock is selected
278 
#define         AT91C_PMC_CSS_PLL_CLK              (0x3) // (PMC) Clock from PLL is selected
279 
#define AT91C_PMC_PRES            (0x7 <<  2) // (PMC) Programmable Clock Prescaler
280 
#define         AT91C_PMC_PRES_CLK                  (0x0 <<  2) // (PMC) Selected clock
281 
#define         AT91C_PMC_PRES_CLK_2                (0x1 <<  2) // (PMC) Selected clock divided by 2
282 
#define         AT91C_PMC_PRES_CLK_4                (0x2 <<  2) // (PMC) Selected clock divided by 4
283 
#define         AT91C_PMC_PRES_CLK_8                (0x3 <<  2) // (PMC) Selected clock divided by 8
284 
#define         AT91C_PMC_PRES_CLK_16               (0x4 <<  2) // (PMC) Selected clock divided by 16
285 
#define         AT91C_PMC_PRES_CLK_32               (0x5 <<  2) // (PMC) Selected clock divided by 32
286 
#define         AT91C_PMC_PRES_CLK_64               (0x6 <<  2) // (PMC) Selected clock divided by 64
287 
// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register --------
288 
// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register --------
289 
#define AT91C_PMC_MOSCS           (0x1 <<  0) // (PMC) MOSC Status/Enable/Disable/Mask
290 
#define AT91C_PMC_LOCK            (0x1 <<  2) // (PMC) PLL Status/Enable/Disable/Mask
291 
#define AT91C_PMC_MCKRDY          (0x1 <<  3) // (PMC) MCK_RDY Status/Enable/Disable/Mask
292 
#define AT91C_PMC_PCK0RDY         (0x1 <<  8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask
293 
#define AT91C_PMC_PCK1RDY         (0x1 <<  9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask
294 
#define AT91C_PMC_PCK2RDY         (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask
295 
#define AT91C_PMC_PCK3RDY         (0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask
296 
// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register --------
297 
// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------
298 
// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------
299 
 
300 
// *****************************************************************************
301 
//              SOFTWARE API DEFINITION  FOR Reset Controller Interface
302 
// *****************************************************************************
303 
// *** Register offset in AT91S_RSTC structure ***
304 
#define RSTC_RCR        ( 0) // Reset Control Register
305 
#define RSTC_RSR        ( 4) // Reset Status Register
306 
#define RSTC_RMR        ( 8) // Reset Mode Register
307 
// -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register --------
308 
#define AT91C_RSTC_PROCRST        (0x1 <<  0) // (RSTC) Processor Reset
309 
#define AT91C_RSTC_PERRST         (0x1 <<  2) // (RSTC) Peripheral Reset
310 
#define AT91C_RSTC_EXTRST         (0x1 <<  3) // (RSTC) External Reset
311 
#define AT91C_RSTC_KEY            (0xFF << 24) // (RSTC) Password
312 
// -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register --------
313 
#define AT91C_RSTC_URSTS          (0x1 <<  0) // (RSTC) User Reset Status
314 
#define AT91C_RSTC_BODSTS         (0x1 <<  1) // (RSTC) Brownout Detection Status
315 
#define AT91C_RSTC_RSTTYP         (0x7 <<  8) // (RSTC) Reset Type
316 
#define         AT91C_RSTC_RSTTYP_POWERUP              (0x0 <<  8) // (RSTC) Power-up Reset. VDDCORE rising.
317 
#define         AT91C_RSTC_RSTTYP_WAKEUP               (0x1 <<  8) // (RSTC) WakeUp Reset. VDDCORE rising.
318 
#define         AT91C_RSTC_RSTTYP_WATCHDOG             (0x2 <<  8) // (RSTC) Watchdog Reset. Watchdog overflow occured.
319 
#define         AT91C_RSTC_RSTTYP_SOFTWARE             (0x3 <<  8) // (RSTC) Software Reset. Processor reset required by the software.
320 
#define         AT91C_RSTC_RSTTYP_USER                 (0x4 <<  8) // (RSTC) User Reset. NRST pin detected low.
321 
#define         AT91C_RSTC_RSTTYP_BROWNOUT             (0x5 <<  8) // (RSTC) Brownout Reset occured.
322 
#define AT91C_RSTC_NRSTL          (0x1 << 16) // (RSTC) NRST pin level
323 
#define AT91C_RSTC_SRCMP          (0x1 << 17) // (RSTC) Software Reset Command in Progress.
324 
// -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register --------
325 
#define AT91C_RSTC_URSTEN         (0x1 <<  0) // (RSTC) User Reset Enable
326 
#define AT91C_RSTC_URSTIEN        (0x1 <<  4) // (RSTC) User Reset Interrupt Enable
327 
#define AT91C_RSTC_ERSTL          (0xF <<  8) // (RSTC) User Reset Enable
328 
#define AT91C_RSTC_BODIEN         (0x1 << 16) // (RSTC) Brownout Detection Interrupt Enable
329 
 
330 
// *****************************************************************************
331 
//              SOFTWARE API DEFINITION  FOR Real Time Timer Controller Interface
332 
// *****************************************************************************
333 
// *** Register offset in AT91S_RTTC structure ***
334 
#define RTTC_RTMR       ( 0) // Real-time Mode Register
335 
#define RTTC_RTAR       ( 4) // Real-time Alarm Register
336 
#define RTTC_RTVR       ( 8) // Real-time Value Register
337 
#define RTTC_RTSR       (12) // Real-time Status Register
338 
// -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register --------
339 
#define AT91C_RTTC_RTPRES         (0xFFFF <<  0) // (RTTC) Real-time Timer Prescaler Value
340 
#define AT91C_RTTC_ALMIEN         (0x1 << 16) // (RTTC) Alarm Interrupt Enable
341 
#define AT91C_RTTC_RTTINCIEN      (0x1 << 17) // (RTTC) Real Time Timer Increment Interrupt Enable
342 
#define AT91C_RTTC_RTTRST         (0x1 << 18) // (RTTC) Real Time Timer Restart
343 
// -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register --------
344 
#define AT91C_RTTC_ALMV           (0x0 <<  0) // (RTTC) Alarm Value
345 
// -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register --------
346 
#define AT91C_RTTC_CRTV           (0x0 <<  0) // (RTTC) Current Real-time Value
347 
// -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register --------
348 
#define AT91C_RTTC_ALMS           (0x1 <<  0) // (RTTC) Real-time Alarm Status
349 
#define AT91C_RTTC_RTTINC         (0x1 <<  1) // (RTTC) Real-time Timer Increment
350 
 
351 
// *****************************************************************************
352 
//              SOFTWARE API DEFINITION  FOR Periodic Interval Timer Controller Interface
353 
// *****************************************************************************
354 
// *** Register offset in AT91S_PITC structure ***
355 
#define PITC_PIMR       ( 0) // Period Interval Mode Register
356 
#define PITC_PISR       ( 4) // Period Interval Status Register
357 
#define PITC_PIVR       ( 8) // Period Interval Value Register
358 
#define PITC_PIIR       (12) // Period Interval Image Register
359 
// -------- PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register --------
360 
#define AT91C_PITC_PIV            (0xFFFFF <<  0) // (PITC) Periodic Interval Value
361 
#define AT91C_PITC_PITEN          (0x1 << 24) // (PITC) Periodic Interval Timer Enabled
362 
#define AT91C_PITC_PITIEN         (0x1 << 25) // (PITC) Periodic Interval Timer Interrupt Enable
363 
// -------- PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register --------
364 
#define AT91C_PITC_PITS           (0x1 <<  0) // (PITC) Periodic Interval Timer Status
365 
// -------- PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register --------
366 
#define AT91C_PITC_CPIV           (0xFFFFF <<  0) // (PITC) Current Periodic Interval Value
367 
#define AT91C_PITC_PICNT          (0xFFF << 20) // (PITC) Periodic Interval Counter
368 
// -------- PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register --------
369 
 
370 
// *****************************************************************************
371 
//              SOFTWARE API DEFINITION  FOR Watchdog Timer Controller Interface
372 
// *****************************************************************************
373 
// *** Register offset in AT91S_WDTC structure ***
374 
#define WDTC_WDCR       ( 0) // Watchdog Control Register
375 
#define WDTC_WDMR       ( 4) // Watchdog Mode Register
376 
#define WDTC_WDSR       ( 8) // Watchdog Status Register
377 
// -------- WDTC_WDCR : (WDTC Offset: 0x0) Periodic Interval Image Register --------
378 
#define AT91C_WDTC_WDRSTT         (0x1 <<  0) // (WDTC) Watchdog Restart
379 
#define AT91C_WDTC_KEY            (0xFF << 24) // (WDTC) Watchdog KEY Password
380 
// -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register --------
381 
#define AT91C_WDTC_WDV            (0xFFF <<  0) // (WDTC) Watchdog Timer Restart
382 
#define AT91C_WDTC_WDFIEN         (0x1 << 12) // (WDTC) Watchdog Fault Interrupt Enable
383 
#define AT91C_WDTC_WDRSTEN        (0x1 << 13) // (WDTC) Watchdog Reset Enable
384 
#define AT91C_WDTC_WDRPROC        (0x1 << 14) // (WDTC) Watchdog Timer Restart
385 
#define AT91C_WDTC_WDDIS          (0x1 << 15) // (WDTC) Watchdog Disable
386 
#define AT91C_WDTC_WDD            (0xFFF << 16) // (WDTC) Watchdog Delta Value
387 
#define AT91C_WDTC_WDDBGHLT       (0x1 << 28) // (WDTC) Watchdog Debug Halt
388 
#define AT91C_WDTC_WDIDLEHLT      (0x1 << 29) // (WDTC) Watchdog Idle Halt
389 
// -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register --------
390 
#define AT91C_WDTC_WDUNF          (0x1 <<  0) // (WDTC) Watchdog Underflow
391 
#define AT91C_WDTC_WDERR          (0x1 <<  1) // (WDTC) Watchdog Error
392 
 
393 
// *****************************************************************************
394 
//              SOFTWARE API DEFINITION  FOR Voltage Regulator Mode Controller Interface
395 
// *****************************************************************************
396 
// *** Register offset in AT91S_VREG structure ***
397 
#define VREG_MR         ( 0) // Voltage Regulator Mode Register
398 
// -------- VREG_MR : (VREG Offset: 0x0) Voltage Regulator Mode Register --------
399 
#define AT91C_VREG_PSTDBY         (0x1 <<  0) // (VREG) Voltage Regulator Power Standby Mode
400 
 
401 
// *****************************************************************************
402 
//              SOFTWARE API DEFINITION  FOR Memory Controller Interface
403 
// *****************************************************************************
404 
// *** Register offset in AT91S_MC structure ***
405 
#define MC_RCR          ( 0) // MC Remap Control Register
406 
#define MC_ASR          ( 4) // MC Abort Status Register
407 
#define MC_AASR         ( 8) // MC Abort Address Status Register
408 
#define MC_FMR          (96) // MC Flash Mode Register
409 
#define MC_FCR          (100) // MC Flash Command Register
410 
#define MC_FSR          (104) // MC Flash Status Register
411 
// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register --------
412 
#define AT91C_MC_RCB              (0x1 <<  0) // (MC) Remap Command Bit
413 
// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register --------
414 
#define AT91C_MC_UNDADD           (0x1 <<  0) // (MC) Undefined Addess Abort Status
415 
#define AT91C_MC_MISADD           (0x1 <<  1) // (MC) Misaligned Addess Abort Status
416 
#define AT91C_MC_ABTSZ            (0x3 <<  8) // (MC) Abort Size Status
417 
#define         AT91C_MC_ABTSZ_BYTE                 (0x0 <<  8) // (MC) Byte
418 
#define         AT91C_MC_ABTSZ_HWORD                (0x1 <<  8) // (MC) Half-word
419 
#define         AT91C_MC_ABTSZ_WORD                 (0x2 <<  8) // (MC) Word
420 
#define AT91C_MC_ABTTYP           (0x3 << 10) // (MC) Abort Type Status
421 
#define         AT91C_MC_ABTTYP_DATAR                (0x0 << 10) // (MC) Data Read
422 
#define         AT91C_MC_ABTTYP_DATAW                (0x1 << 10) // (MC) Data Write
423 
#define         AT91C_MC_ABTTYP_FETCH                (0x2 << 10) // (MC) Code Fetch
424 
#define AT91C_MC_MST0             (0x1 << 16) // (MC) Master 0 Abort Source
425 
#define AT91C_MC_MST1             (0x1 << 17) // (MC) Master 1 Abort Source
426 
#define AT91C_MC_SVMST0           (0x1 << 24) // (MC) Saved Master 0 Abort Source
427 
#define AT91C_MC_SVMST1           (0x1 << 25) // (MC) Saved Master 1 Abort Source
428 
// -------- MC_FMR : (MC Offset: 0x60) MC Flash Mode Register --------
429 
#define AT91C_MC_FRDY             (0x1 <<  0) // (MC) Flash Ready
430 
#define AT91C_MC_LOCKE            (0x1 <<  2) // (MC) Lock Error
431 
#define AT91C_MC_PROGE            (0x1 <<  3) // (MC) Programming Error
432 
#define AT91C_MC_NEBP             (0x1 <<  7) // (MC) No Erase Before Programming
433 
#define AT91C_MC_FWS              (0x3 <<  8) // (MC) Flash Wait State
434 
#define         AT91C_MC_FWS_0FWS                 (0x0 <<  8) // (MC) 1 cycle for Read, 2 for Write operations
435 
#define         AT91C_MC_FWS_1FWS                 (0x1 <<  8) // (MC) 2 cycles for Read, 3 for Write operations
436 
#define         AT91C_MC_FWS_2FWS                 (0x2 <<  8) // (MC) 3 cycles for Read, 4 for Write operations
437 
#define         AT91C_MC_FWS_3FWS                 (0x3 <<  8) // (MC) 4 cycles for Read, 4 for Write operations
438 
#define AT91C_MC_FMCN             (0xFF << 16) // (MC) Flash Microsecond Cycle Number
439 
// -------- MC_FCR : (MC Offset: 0x64) MC Flash Command Register --------
440 
#define AT91C_MC_FCMD             (0xF <<  0) // (MC) Flash Command
441 
#define         AT91C_MC_FCMD_START_PROG           (0x1) // (MC) Starts the programming of th epage specified by PAGEN.
442 
#define         AT91C_MC_FCMD_LOCK                 (0x2) // (MC) Starts a lock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
443 
#define         AT91C_MC_FCMD_PROG_AND_LOCK        (0x3) // (MC) The lock sequence automatically happens after the programming sequence is completed.
444 
#define         AT91C_MC_FCMD_UNLOCK               (0x4) // (MC) Starts an unlock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
445 
#define         AT91C_MC_FCMD_ERASE_ALL            (0x8) // (MC) Starts the erase of the entire flash.If at least a page is locked, the command is cancelled.
446 
#define         AT91C_MC_FCMD_SET_GP_NVM           (0xB) // (MC) Set General Purpose NVM bits.
447 
#define         AT91C_MC_FCMD_CLR_GP_NVM           (0xD) // (MC) Clear General Purpose NVM bits.
448 
#define         AT91C_MC_FCMD_SET_SECURITY         (0xF) // (MC) Set Security Bit.
449 
#define AT91C_MC_PAGEN            (0x3FF <<  8) // (MC) Page Number
450 
#define AT91C_MC_KEY              (0xFF << 24) // (MC) Writing Protect Key
451 
// -------- MC_FSR : (MC Offset: 0x68) MC Flash Command Register --------
452 
#define AT91C_MC_SECURITY         (0x1 <<  4) // (MC) Security Bit Status
453 
#define AT91C_MC_GPNVM0           (0x1 <<  8) // (MC) Sector 0 Lock Status
454 
#define AT91C_MC_GPNVM1           (0x1 <<  9) // (MC) Sector 1 Lock Status
455 
#define AT91C_MC_GPNVM2           (0x1 << 10) // (MC) Sector 2 Lock Status
456 
#define AT91C_MC_GPNVM3           (0x1 << 11) // (MC) Sector 3 Lock Status
457 
#define AT91C_MC_GPNVM4           (0x1 << 12) // (MC) Sector 4 Lock Status
458 
#define AT91C_MC_GPNVM5           (0x1 << 13) // (MC) Sector 5 Lock Status
459 
#define AT91C_MC_GPNVM6           (0x1 << 14) // (MC) Sector 6 Lock Status
460 
#define AT91C_MC_GPNVM7           (0x1 << 15) // (MC) Sector 7 Lock Status
461 
#define AT91C_MC_LOCKS0           (0x1 << 16) // (MC) Sector 0 Lock Status
462 
#define AT91C_MC_LOCKS1           (0x1 << 17) // (MC) Sector 1 Lock Status
463 
#define AT91C_MC_LOCKS2           (0x1 << 18) // (MC) Sector 2 Lock Status
464 
#define AT91C_MC_LOCKS3           (0x1 << 19) // (MC) Sector 3 Lock Status
465 
#define AT91C_MC_LOCKS4           (0x1 << 20) // (MC) Sector 4 Lock Status
466 
#define AT91C_MC_LOCKS5           (0x1 << 21) // (MC) Sector 5 Lock Status
467 
#define AT91C_MC_LOCKS6           (0x1 << 22) // (MC) Sector 6 Lock Status
468 
#define AT91C_MC_LOCKS7           (0x1 << 23) // (MC) Sector 7 Lock Status
469 
#define AT91C_MC_LOCKS8           (0x1 << 24) // (MC) Sector 8 Lock Status
470 
#define AT91C_MC_LOCKS9           (0x1 << 25) // (MC) Sector 9 Lock Status
471 
#define AT91C_MC_LOCKS10          (0x1 << 26) // (MC) Sector 10 Lock Status
472 
#define AT91C_MC_LOCKS11          (0x1 << 27) // (MC) Sector 11 Lock Status
473 
#define AT91C_MC_LOCKS12          (0x1 << 28) // (MC) Sector 12 Lock Status
474 
#define AT91C_MC_LOCKS13          (0x1 << 29) // (MC) Sector 13 Lock Status
475 
#define AT91C_MC_LOCKS14          (0x1 << 30) // (MC) Sector 14 Lock Status
476 
#define AT91C_MC_LOCKS15          (0x1 << 31) // (MC) Sector 15 Lock Status
477 
 
478 
// *****************************************************************************
479 
//              SOFTWARE API DEFINITION  FOR Serial Parallel Interface
480 
// *****************************************************************************
481 
// *** Register offset in AT91S_SPI structure ***
482 
#define SPI_CR          ( 0) // Control Register
483 
#define SPI_MR          ( 4) // Mode Register
484 
#define SPI_RDR         ( 8) // Receive Data Register
485 
#define SPI_TDR         (12) // Transmit Data Register
486 
#define SPI_SR          (16) // Status Register
487 
#define SPI_IER         (20) // Interrupt Enable Register
488 
#define SPI_IDR         (24) // Interrupt Disable Register
489 
#define SPI_IMR         (28) // Interrupt Mask Register
490 
#define SPI_CSR         (48) // Chip Select Register
491 
#define SPI_RPR         (256) // Receive Pointer Register
492 
#define SPI_RCR         (260) // Receive Counter Register
493 
#define SPI_TPR         (264) // Transmit Pointer Register
494 
#define SPI_TCR         (268) // Transmit Counter Register
495 
#define SPI_RNPR        (272) // Receive Next Pointer Register
496 
#define SPI_RNCR        (276) // Receive Next Counter Register
497 
#define SPI_TNPR        (280) // Transmit Next Pointer Register
498 
#define SPI_TNCR        (284) // Transmit Next Counter Register
499 
#define SPI_PTCR        (288) // PDC Transfer Control Register
500 
#define SPI_PTSR        (292) // PDC Transfer Status Register
501 
// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register --------
502 
#define AT91C_SPI_SPIEN           (0x1 <<  0) // (SPI) SPI Enable
503 
#define AT91C_SPI_SPIDIS          (0x1 <<  1) // (SPI) SPI Disable
504 
#define AT91C_SPI_SWRST           (0x1 <<  7) // (SPI) SPI Software reset
505 
#define AT91C_SPI_LASTXFER        (0x1 << 24) // (SPI) SPI Last Transfer
506 
// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register --------
507 
#define AT91C_SPI_MSTR            (0x1 <<  0) // (SPI) Master/Slave Mode
508 
#define AT91C_SPI_PS              (0x1 <<  1) // (SPI) Peripheral Select
509 
#define         AT91C_SPI_PS_FIXED                (0x0 <<  1) // (SPI) Fixed Peripheral Select
510 
#define         AT91C_SPI_PS_VARIABLE             (0x1 <<  1) // (SPI) Variable Peripheral Select
511 
#define AT91C_SPI_PCSDEC          (0x1 <<  2) // (SPI) Chip Select Decode
512 
#define AT91C_SPI_FDIV            (0x1 <<  3) // (SPI) Clock Selection
513 
#define AT91C_SPI_MODFDIS         (0x1 <<  4) // (SPI) Mode Fault Detection
514 
#define AT91C_SPI_LLB             (0x1 <<  7) // (SPI) Clock Selection
515 
#define AT91C_SPI_PCS             (0xF << 16) // (SPI) Peripheral Chip Select
516 
#define AT91C_SPI_DLYBCS          (0xFF << 24) // (SPI) Delay Between Chip Selects
517 
// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register --------
518 
#define AT91C_SPI_RD              (0xFFFF <<  0) // (SPI) Receive Data
519 
#define AT91C_SPI_RPCS            (0xF << 16) // (SPI) Peripheral Chip Select Status
520 
// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register --------
521 
#define AT91C_SPI_TD              (0xFFFF <<  0) // (SPI) Transmit Data
522 
#define AT91C_SPI_TPCS            (0xF << 16) // (SPI) Peripheral Chip Select Status
523 
// -------- SPI_SR : (SPI Offset: 0x10) Status Register --------
524 
#define AT91C_SPI_RDRF            (0x1 <<  0) // (SPI) Receive Data Register Full
525 
#define AT91C_SPI_TDRE            (0x1 <<  1) // (SPI) Transmit Data Register Empty
526 
#define AT91C_SPI_MODF            (0x1 <<  2) // (SPI) Mode Fault Error
527 
#define AT91C_SPI_OVRES           (0x1 <<  3) // (SPI) Overrun Error Status
528 
#define AT91C_SPI_ENDRX           (0x1 <<  4) // (SPI) End of Receiver Transfer
529 
#define AT91C_SPI_ENDTX           (0x1 <<  5) // (SPI) End of Receiver Transfer
530 
#define AT91C_SPI_RXBUFF          (0x1 <<  6) // (SPI) RXBUFF Interrupt
531 
#define AT91C_SPI_TXBUFE          (0x1 <<  7) // (SPI) TXBUFE Interrupt
532 
#define AT91C_SPI_NSSR            (0x1 <<  8) // (SPI) NSSR Interrupt
533 
#define AT91C_SPI_TXEMPTY         (0x1 <<  9) // (SPI) TXEMPTY Interrupt
534 
#define AT91C_SPI_SPIENS          (0x1 << 16) // (SPI) Enable Status
535 
// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register --------
536 
// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register --------
537 
// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register --------
538 
// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register --------
539 
#define AT91C_SPI_CPOL            (0x1 <<  0) // (SPI) Clock Polarity
540 
#define AT91C_SPI_NCPHA           (0x1 <<  1) // (SPI) Clock Phase
541 
#define AT91C_SPI_CSAAT           (0x1 <<  3) // (SPI) Chip Select Active After Transfer
542 
#define AT91C_SPI_BITS            (0xF <<  4) // (SPI) Bits Per Transfer
543 
#define         AT91C_SPI_BITS_8                    (0x0 <<  4) // (SPI) 8 Bits Per transfer
544 
#define         AT91C_SPI_BITS_9                    (0x1 <<  4) // (SPI) 9 Bits Per transfer
545 
#define         AT91C_SPI_BITS_10                   (0x2 <<  4) // (SPI) 10 Bits Per transfer
546 
#define         AT91C_SPI_BITS_11                   (0x3 <<  4) // (SPI) 11 Bits Per transfer
547 
#define         AT91C_SPI_BITS_12                   (0x4 <<  4) // (SPI) 12 Bits Per transfer
548 
#define         AT91C_SPI_BITS_13                   (0x5 <<  4) // (SPI) 13 Bits Per transfer
549 
#define         AT91C_SPI_BITS_14                   (0x6 <<  4) // (SPI) 14 Bits Per transfer
550 
#define         AT91C_SPI_BITS_15                   (0x7 <<  4) // (SPI) 15 Bits Per transfer
551 
#define         AT91C_SPI_BITS_16                   (0x8 <<  4) // (SPI) 16 Bits Per transfer
552 
#define AT91C_SPI_SCBR            (0xFF <<  8) // (SPI) Serial Clock Baud Rate
553 
#define AT91C_SPI_DLYBS           (0xFF << 16) // (SPI) Delay Before SPCK
554 
#define AT91C_SPI_DLYBCT          (0xFF << 24) // (SPI) Delay Between Consecutive Transfers
555 
 
556 
// *****************************************************************************
557 
//              SOFTWARE API DEFINITION  FOR Usart
558 
// *****************************************************************************
559 
// *** Register offset in AT91S_USART structure ***
560 
#define US_CR           ( 0) // Control Register
561 
#define US_MR           ( 4) // Mode Register
562 
#define US_IER          ( 8) // Interrupt Enable Register
563 
#define US_IDR          (12) // Interrupt Disable Register
564 
#define US_IMR          (16) // Interrupt Mask Register
565 
#define US_CSR          (20) // Channel Status Register
566 
#define US_RHR          (24) // Receiver Holding Register
567 
#define US_THR          (28) // Transmitter Holding Register
568 
#define US_BRGR         (32) // Baud Rate Generator Register
569 
#define US_RTOR         (36) // Receiver Time-out Register
570 
#define US_TTGR         (40) // Transmitter Time-guard Register
571 
#define US_FIDI         (64) // FI_DI_Ratio Register
572 
#define US_NER          (68) // Nb Errors Register
573 
#define US_IF           (76) // IRDA_FILTER Register
574 
#define US_RPR          (256) // Receive Pointer Register
575 
#define US_RCR          (260) // Receive Counter Register
576 
#define US_TPR          (264) // Transmit Pointer Register
577 
#define US_TCR          (268) // Transmit Counter Register
578 
#define US_RNPR         (272) // Receive Next Pointer Register
579 
#define US_RNCR         (276) // Receive Next Counter Register
580 
#define US_TNPR         (280) // Transmit Next Pointer Register
581 
#define US_TNCR         (284) // Transmit Next Counter Register
582 
#define US_PTCR         (288) // PDC Transfer Control Register
583 
#define US_PTSR         (292) // PDC Transfer Status Register
584 
// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register --------
585 
#define AT91C_US_STTBRK           (0x1 <<  9) // (USART) Start Break
586 
#define AT91C_US_STPBRK           (0x1 << 10) // (USART) Stop Break
587 
#define AT91C_US_STTTO            (0x1 << 11) // (USART) Start Time-out
588 
#define AT91C_US_SENDA            (0x1 << 12) // (USART) Send Address
589 
#define AT91C_US_RSTIT            (0x1 << 13) // (USART) Reset Iterations
590 
#define AT91C_US_RSTNACK          (0x1 << 14) // (USART) Reset Non Acknowledge
591 
#define AT91C_US_RETTO            (0x1 << 15) // (USART) Rearm Time-out
592 
#define AT91C_US_DTREN            (0x1 << 16) // (USART) Data Terminal ready Enable
593 
#define AT91C_US_DTRDIS           (0x1 << 17) // (USART) Data Terminal ready Disable
594 
#define AT91C_US_RTSEN            (0x1 << 18) // (USART) Request to Send enable
595 
#define AT91C_US_RTSDIS           (0x1 << 19) // (USART) Request to Send Disable
596 
// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register --------
597 
#define AT91C_US_USMODE           (0xF <<  0) // (USART) Usart mode
598 
#define         AT91C_US_USMODE_NORMAL               (0x0) // (USART) Normal
599 
#define         AT91C_US_USMODE_RS485                (0x1) // (USART) RS485
600 
#define         AT91C_US_USMODE_HWHSH                (0x2) // (USART) Hardware Handshaking
601 
#define         AT91C_US_USMODE_MODEM                (0x3) // (USART) Modem
602 
#define         AT91C_US_USMODE_ISO7816_0            (0x4) // (USART) ISO7816 protocol: T = 0
603 
#define         AT91C_US_USMODE_ISO7816_1            (0x6) // (USART) ISO7816 protocol: T = 1
604 
#define         AT91C_US_USMODE_IRDA                 (0x8) // (USART) IrDA
605 
#define         AT91C_US_USMODE_SWHSH                (0xC) // (USART) Software Handshaking
606 
#define AT91C_US_CLKS             (0x3 <<  4) // (USART) Clock Selection (Baud Rate generator Input Clock
607 
#define         AT91C_US_CLKS_CLOCK                (0x0 <<  4) // (USART) Clock
608 
#define         AT91C_US_CLKS_FDIV1                (0x1 <<  4) // (USART) fdiv1
609 
#define         AT91C_US_CLKS_SLOW                 (0x2 <<  4) // (USART) slow_clock (ARM)
610 
#define         AT91C_US_CLKS_EXT                  (0x3 <<  4) // (USART) External (SCK)
611 
#define AT91C_US_CHRL             (0x3 <<  6) // (USART) Clock Selection (Baud Rate generator Input Clock
612 
#define         AT91C_US_CHRL_5_BITS               (0x0 <<  6) // (USART) Character Length: 5 bits
613 
#define         AT91C_US_CHRL_6_BITS               (0x1 <<  6) // (USART) Character Length: 6 bits
614 
#define         AT91C_US_CHRL_7_BITS               (0x2 <<  6) // (USART) Character Length: 7 bits
615 
#define         AT91C_US_CHRL_8_BITS               (0x3 <<  6) // (USART) Character Length: 8 bits
616 
#define AT91C_US_SYNC             (0x1 <<  8) // (USART) Synchronous Mode Select
617 
#define AT91C_US_NBSTOP           (0x3 << 12) // (USART) Number of Stop bits
618 
#define         AT91C_US_NBSTOP_1_BIT                (0x0 << 12) // (USART) 1 stop bit
619 
#define         AT91C_US_NBSTOP_15_BIT               (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
620 
#define         AT91C_US_NBSTOP_2_BIT                (0x2 << 12) // (USART) 2 stop bits
621 
#define AT91C_US_MSBF             (0x1 << 16) // (USART) Bit Order
622 
#define AT91C_US_MODE9            (0x1 << 17) // (USART) 9-bit Character length
623 
#define AT91C_US_CKLO             (0x1 << 18) // (USART) Clock Output Select
624 
#define AT91C_US_OVER             (0x1 << 19) // (USART) Over Sampling Mode
625 
#define AT91C_US_INACK            (0x1 << 20) // (USART) Inhibit Non Acknowledge
626 
#define AT91C_US_DSNACK           (0x1 << 21) // (USART) Disable Successive NACK
627 
#define AT91C_US_MAX_ITER         (0x1 << 24) // (USART) Number of Repetitions
628 
#define AT91C_US_FILTER           (0x1 << 28) // (USART) Receive Line Filter
629 
// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register --------
630 
#define AT91C_US_RXBRK            (0x1 <<  2) // (USART) Break Received/End of Break
631 
#define AT91C_US_TIMEOUT          (0x1 <<  8) // (USART) Receiver Time-out
632 
#define AT91C_US_ITERATION        (0x1 << 10) // (USART) Max number of Repetitions Reached
633 
#define AT91C_US_NACK             (0x1 << 13) // (USART) Non Acknowledge
634 
#define AT91C_US_RIIC             (0x1 << 16) // (USART) Ring INdicator Input Change Flag
635 
#define AT91C_US_DSRIC            (0x1 << 17) // (USART) Data Set Ready Input Change Flag
636 
#define AT91C_US_DCDIC            (0x1 << 18) // (USART) Data Carrier Flag
637 
#define AT91C_US_CTSIC            (0x1 << 19) // (USART) Clear To Send Input Change Flag
638 
// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register --------
639 
// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register --------
640 
// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register --------
641 
#define AT91C_US_RI               (0x1 << 20) // (USART) Image of RI Input
642 
#define AT91C_US_DSR              (0x1 << 21) // (USART) Image of DSR Input
643 
#define AT91C_US_DCD              (0x1 << 22) // (USART) Image of DCD Input
644 
#define AT91C_US_CTS              (0x1 << 23) // (USART) Image of CTS Input
645 
 
646 
// *****************************************************************************
647 
//              SOFTWARE API DEFINITION  FOR Synchronous Serial Controller Interface
648 
// *****************************************************************************
649 
// *** Register offset in AT91S_SSC structure ***
650 
#define SSC_CR          ( 0) // Control Register
651 
#define SSC_CMR         ( 4) // Clock Mode Register
652 
#define SSC_RCMR        (16) // Receive Clock ModeRegister
653 
#define SSC_RFMR        (20) // Receive Frame Mode Register
654 
#define SSC_TCMR        (24) // Transmit Clock Mode Register
655 
#define SSC_TFMR        (28) // Transmit Frame Mode Register
656 
#define SSC_RHR         (32) // Receive Holding Register
657 
#define SSC_THR         (36) // Transmit Holding Register
658 
#define SSC_RSHR        (48) // Receive Sync Holding Register
659 
#define SSC_TSHR        (52) // Transmit Sync Holding Register
660 
#define SSC_SR          (64) // Status Register
661 
#define SSC_IER         (68) // Interrupt Enable Register
662 
#define SSC_IDR         (72) // Interrupt Disable Register
663 
#define SSC_IMR         (76) // Interrupt Mask Register
664 
#define SSC_RPR         (256) // Receive Pointer Register
665 
#define SSC_RCR         (260) // Receive Counter Register
666 
#define SSC_TPR         (264) // Transmit Pointer Register
667 
#define SSC_TCR         (268) // Transmit Counter Register
668 
#define SSC_RNPR        (272) // Receive Next Pointer Register
669 
#define SSC_RNCR        (276) // Receive Next Counter Register
670 
#define SSC_TNPR        (280) // Transmit Next Pointer Register
671 
#define SSC_TNCR        (284) // Transmit Next Counter Register
672 
#define SSC_PTCR        (288) // PDC Transfer Control Register
673 
#define SSC_PTSR        (292) // PDC Transfer Status Register
674 
// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register --------
675 
#define AT91C_SSC_RXEN            (0x1 <<  0) // (SSC) Receive Enable
676 
#define AT91C_SSC_RXDIS           (0x1 <<  1) // (SSC) Receive Disable
677 
#define AT91C_SSC_TXEN            (0x1 <<  8) // (SSC) Transmit Enable
678 
#define AT91C_SSC_TXDIS           (0x1 <<  9) // (SSC) Transmit Disable
679 
#define AT91C_SSC_SWRST           (0x1 << 15) // (SSC) Software Reset
680 
// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register --------
681 
#define AT91C_SSC_CKS             (0x3 <<  0) // (SSC) Receive/Transmit Clock Selection
682 
#define         AT91C_SSC_CKS_DIV                  (0x0) // (SSC) Divided Clock
683 
#define         AT91C_SSC_CKS_TK                   (0x1) // (SSC) TK Clock signal
684 
#define         AT91C_SSC_CKS_RK                   (0x2) // (SSC) RK pin
685 
#define AT91C_SSC_CKO             (0x7 <<  2) // (SSC) Receive/Transmit Clock Output Mode Selection
686 
#define         AT91C_SSC_CKO_NONE                 (0x0 <<  2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
687 
#define         AT91C_SSC_CKO_CONTINOUS            (0x1 <<  2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output
688 
#define         AT91C_SSC_CKO_DATA_TX              (0x2 <<  2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
689 
#define AT91C_SSC_CKI             (0x1 <<  5) // (SSC) Receive/Transmit Clock Inversion
690 
#define AT91C_SSC_START           (0xF <<  8) // (SSC) Receive/Transmit Start Selection
691 
#define         AT91C_SSC_START_CONTINOUS            (0x0 <<  8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
692 
#define         AT91C_SSC_START_TX                   (0x1 <<  8) // (SSC) Transmit/Receive start
693 
#define         AT91C_SSC_START_LOW_RF               (0x2 <<  8) // (SSC) Detection of a low level on RF input
694 
#define         AT91C_SSC_START_HIGH_RF              (0x3 <<  8) // (SSC) Detection of a high level on RF input
695 
#define         AT91C_SSC_START_FALL_RF              (0x4 <<  8) // (SSC) Detection of a falling edge on RF input
696 
#define         AT91C_SSC_START_RISE_RF              (0x5 <<  8) // (SSC) Detection of a rising edge on RF input
697 
#define         AT91C_SSC_START_LEVEL_RF             (0x6 <<  8) // (SSC) Detection of any level change on RF input
698 
#define         AT91C_SSC_START_EDGE_RF              (0x7 <<  8) // (SSC) Detection of any edge on RF input
699 
#define         AT91C_SSC_START_0                    (0x8 <<  8) // (SSC) Compare 0
700 
#define AT91C_SSC_STTDLY          (0xFF << 16) // (SSC) Receive/Transmit Start Delay
701 
#define AT91C_SSC_PERIOD          (0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection
702 
// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register --------
703 
#define AT91C_SSC_DATLEN          (0x1F <<  0) // (SSC) Data Length
704 
#define AT91C_SSC_LOOP            (0x1 <<  5) // (SSC) Loop Mode
705 
#define AT91C_SSC_MSBF            (0x1 <<  7) // (SSC) Most Significant Bit First
706 
#define AT91C_SSC_DATNB           (0xF <<  8) // (SSC) Data Number per Frame
707 
#define AT91C_SSC_FSLEN           (0xF << 16) // (SSC) Receive/Transmit Frame Sync length
708 
#define AT91C_SSC_FSOS            (0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection
709 
#define         AT91C_SSC_FSOS_NONE                 (0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
710 
#define         AT91C_SSC_FSOS_NEGATIVE             (0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
711 
#define         AT91C_SSC_FSOS_POSITIVE             (0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
712 
#define         AT91C_SSC_FSOS_LOW                  (0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
713 
#define         AT91C_SSC_FSOS_HIGH                 (0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
714 
#define         AT91C_SSC_FSOS_TOGGLE               (0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
715 
#define AT91C_SSC_FSEDGE          (0x1 << 24) // (SSC) Frame Sync Edge Detection
716 
// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register --------
717 
// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register --------
718 
#define AT91C_SSC_DATDEF          (0x1 <<  5) // (SSC) Data Default Value
719 
#define AT91C_SSC_FSDEN           (0x1 << 23) // (SSC) Frame Sync Data Enable
720 
// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register --------
721 
#define AT91C_SSC_TXRDY           (0x1 <<  0) // (SSC) Transmit Ready
722 
#define AT91C_SSC_TXEMPTY         (0x1 <<  1) // (SSC) Transmit Empty
723 
#define AT91C_SSC_ENDTX           (0x1 <<  2) // (SSC) End Of Transmission
724 
#define AT91C_SSC_TXBUFE          (0x1 <<  3) // (SSC) Transmit Buffer Empty
725 
#define AT91C_SSC_RXRDY           (0x1 <<  4) // (SSC) Receive Ready
726 
#define AT91C_SSC_OVRUN           (0x1 <<  5) // (SSC) Receive Overrun
727 
#define AT91C_SSC_ENDRX           (0x1 <<  6) // (SSC) End of Reception
728 
#define AT91C_SSC_RXBUFF          (0x1 <<  7) // (SSC) Receive Buffer Full
729 
#define AT91C_SSC_TXSYN           (0x1 << 10) // (SSC) Transmit Sync
730 
#define AT91C_SSC_RXSYN           (0x1 << 11) // (SSC) Receive Sync
731 
#define AT91C_SSC_TXENA           (0x1 << 16) // (SSC) Transmit Enable
732 
#define AT91C_SSC_RXENA           (0x1 << 17) // (SSC) Receive Enable
733 
// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register --------
734 
// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register --------
735 
// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register --------
736 
 
737 
// *****************************************************************************
738 
//              SOFTWARE API DEFINITION  FOR Two-wire Interface
739 
// *****************************************************************************
740 
// *** Register offset in AT91S_TWI structure ***
741 
#define TWI_CR          ( 0) // Control Register
742 
#define TWI_MMR         ( 4) // Master Mode Register
743 
#define TWI_IADR        (12) // Internal Address Register
744 
#define TWI_CWGR        (16) // Clock Waveform Generator Register
745 
#define TWI_SR          (32) // Status Register
746 
#define TWI_IER         (36) // Interrupt Enable Register
747 
#define TWI_IDR         (40) // Interrupt Disable Register
748 
#define TWI_IMR         (44) // Interrupt Mask Register
749 
#define TWI_RHR         (48) // Receive Holding Register
750 
#define TWI_THR         (52) // Transmit Holding Register
751 
// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register --------
752 
#define AT91C_TWI_START           (0x1 <<  0) // (TWI) Send a START Condition
753 
#define AT91C_TWI_STOP            (0x1 <<  1) // (TWI) Send a STOP Condition
754 
#define AT91C_TWI_MSEN            (0x1 <<  2) // (TWI) TWI Master Transfer Enabled
755 
#define AT91C_TWI_MSDIS           (0x1 <<  3) // (TWI) TWI Master Transfer Disabled
756 
#define AT91C_TWI_SWRST           (0x1 <<  7) // (TWI) Software Reset
757 
// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register --------
758 
#define AT91C_TWI_IADRSZ          (0x3 <<  8) // (TWI) Internal Device Address Size
759 
#define         AT91C_TWI_IADRSZ_NO                   (0x0 <<  8) // (TWI) No internal device address
760 
#define         AT91C_TWI_IADRSZ_1_BYTE               (0x1 <<  8) // (TWI) One-byte internal device address
761 
#define         AT91C_TWI_IADRSZ_2_BYTE               (0x2 <<  8) // (TWI) Two-byte internal device address
762 
#define         AT91C_TWI_IADRSZ_3_BYTE               (0x3 <<  8) // (TWI) Three-byte internal device address
763 
#define AT91C_TWI_MREAD           (0x1 << 12) // (TWI) Master Read Direction
764 
#define AT91C_TWI_DADR            (0x7F << 16) // (TWI) Device Address
765 
// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register --------
766 
#define AT91C_TWI_CLDIV           (0xFF <<  0) // (TWI) Clock Low Divider
767 
#define AT91C_TWI_CHDIV           (0xFF <<  8) // (TWI) Clock High Divider
768 
#define AT91C_TWI_CKDIV           (0x7 << 16) // (TWI) Clock Divider
769 
// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register --------
770 
#define AT91C_TWI_TXCOMP          (0x1 <<  0) // (TWI) Transmission Completed
771 
#define AT91C_TWI_RXRDY           (0x1 <<  1) // (TWI) Receive holding register ReaDY
772 
#define AT91C_TWI_TXRDY           (0x1 <<  2) // (TWI) Transmit holding register ReaDY
773 
#define AT91C_TWI_OVRE            (0x1 <<  6) // (TWI) Overrun Error
774 
#define AT91C_TWI_UNRE            (0x1 <<  7) // (TWI) Underrun Error
775 
#define AT91C_TWI_NACK            (0x1 <<  8) // (TWI) Not Acknowledged
776 
// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register --------
777 
// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register --------
778 
// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register --------
779 
 
780 
// *****************************************************************************
781 
//              SOFTWARE API DEFINITION  FOR PWMC Channel Interface
782 
// *****************************************************************************
783 
// *** Register offset in AT91S_PWMC_CH structure ***
784 
#define PWMC_CMR        ( 0) // Channel Mode Register
785 
#define PWMC_CDTYR      ( 4) // Channel Duty Cycle Register
786 
#define PWMC_CPRDR      ( 8) // Channel Period Register
787 
#define PWMC_CCNTR      (12) // Channel Counter Register
788 
#define PWMC_CUPDR      (16) // Channel Update Register
789 
#define PWMC_Reserved   (20) // Reserved
790 
// -------- PWMC_CMR : (PWMC_CH Offset: 0x0) PWMC Channel Mode Register --------
791 
#define AT91C_PWMC_CPRE           (0xF <<  0) // (PWMC_CH) Channel Pre-scaler : PWMC_CLKx
792 
#define         AT91C_PWMC_CPRE_MCK                  (0x0) // (PWMC_CH)
793 
#define         AT91C_PWMC_CPRE_MCKA                 (0xB) // (PWMC_CH)
794 
#define         AT91C_PWMC_CPRE_MCKB                 (0xC) // (PWMC_CH)
795 
#define AT91C_PWMC_CALG           (0x1 <<  8) // (PWMC_CH) Channel Alignment
796 
#define AT91C_PWMC_CPOL           (0x1 <<  9) // (PWMC_CH) Channel Polarity
797 
#define AT91C_PWMC_CPD            (0x1 << 10) // (PWMC_CH) Channel Update Period
798 
// -------- PWMC_CDTYR : (PWMC_CH Offset: 0x4) PWMC Channel Duty Cycle Register --------
799 
#define AT91C_PWMC_CDTY           (0x0 <<  0) // (PWMC_CH) Channel Duty Cycle
800 
// -------- PWMC_CPRDR : (PWMC_CH Offset: 0x8) PWMC Channel Period Register --------
801 
#define AT91C_PWMC_CPRD           (0x0 <<  0) // (PWMC_CH) Channel Period
802 
// -------- PWMC_CCNTR : (PWMC_CH Offset: 0xc) PWMC Channel Counter Register --------
803 
#define AT91C_PWMC_CCNT           (0x0 <<  0) // (PWMC_CH) Channel Counter
804 
// -------- PWMC_CUPDR : (PWMC_CH Offset: 0x10) PWMC Channel Update Register --------
805 
#define AT91C_PWMC_CUPD           (0x0 <<  0) // (PWMC_CH) Channel Update
806 
 
807 
// *****************************************************************************
808 
//              SOFTWARE API DEFINITION  FOR Pulse Width Modulation Controller Interface
809 
// *****************************************************************************
810 
// *** Register offset in AT91S_PWMC structure ***
811 
#define PWMC_MR         ( 0) // PWMC Mode Register
812 
#define PWMC_ENA        ( 4) // PWMC Enable Register
813 
#define PWMC_DIS        ( 8) // PWMC Disable Register
814 
#define PWMC_SR         (12) // PWMC Status Register
815 
#define PWMC_IER        (16) // PWMC Interrupt Enable Register
816 
#define PWMC_IDR        (20) // PWMC Interrupt Disable Register
817 
#define PWMC_IMR        (24) // PWMC Interrupt Mask Register
818 
#define PWMC_ISR        (28) // PWMC Interrupt Status Register
819 
#define PWMC_VR         (252) // PWMC Version Register
820 
#define PWMC_CH         (512) // PWMC Channel
821 
// -------- PWMC_MR : (PWMC Offset: 0x0) PWMC Mode Register --------
822 
#define AT91C_PWMC_DIVA           (0xFF <<  0) // (PWMC) CLKA divide factor.
823 
#define AT91C_PWMC_PREA           (0xF <<  8) // (PWMC) Divider Input Clock Prescaler A
824 
#define         AT91C_PWMC_PREA_MCK                  (0x0 <<  8) // (PWMC)
825 
#define AT91C_PWMC_DIVB           (0xFF << 16) // (PWMC) CLKB divide factor.
826 
#define AT91C_PWMC_PREB           (0xF << 24) // (PWMC) Divider Input Clock Prescaler B
827 
#define         AT91C_PWMC_PREB_MCK                  (0x0 << 24) // (PWMC)
828 
// -------- PWMC_ENA : (PWMC Offset: 0x4) PWMC Enable Register --------
829 
#define AT91C_PWMC_CHID0          (0x1 <<  0) // (PWMC) Channel ID 0
830 
#define AT91C_PWMC_CHID1          (0x1 <<  1) // (PWMC) Channel ID 1
831 
#define AT91C_PWMC_CHID2          (0x1 <<  2) // (PWMC) Channel ID 2
832 
#define AT91C_PWMC_CHID3          (0x1 <<  3) // (PWMC) Channel ID 3
833 
// -------- PWMC_DIS : (PWMC Offset: 0x8) PWMC Disable Register --------
834 
// -------- PWMC_SR : (PWMC Offset: 0xc) PWMC Status Register --------
835 
// -------- PWMC_IER : (PWMC Offset: 0x10) PWMC Interrupt Enable Register --------
836 
// -------- PWMC_IDR : (PWMC Offset: 0x14) PWMC Interrupt Disable Register --------
837 
// -------- PWMC_IMR : (PWMC Offset: 0x18) PWMC Interrupt Mask Register --------
838 
// -------- PWMC_ISR : (PWMC Offset: 0x1c) PWMC Interrupt Status Register --------
839 
 
840 
// *****************************************************************************
841 
//              SOFTWARE API DEFINITION  FOR USB Device Interface
842 
// *****************************************************************************
843 
// *** Register offset in AT91S_UDP structure ***
844 
#define UDP_NUM         ( 0) // Frame Number Register
845 
#define UDP_GLBSTATE    ( 4) // Global State Register
846 
#define UDP_FADDR       ( 8) // Function Address Register
847 
#define UDP_IER         (16) // Interrupt Enable Register
848 
#define UDP_IDR         (20) // Interrupt Disable Register
849 
#define UDP_IMR         (24) // Interrupt Mask Register
850 
#define UDP_ISR         (28) // Interrupt Status Register
851 
#define UDP_ICR         (32) // Interrupt Clear Register
852 
#define UDP_RSTEP       (40) // Reset Endpoint Register
853 
#define UDP_CSR         (48) // Endpoint Control and Status Register
854 
#define UDP_FDR         (80) // Endpoint FIFO Data Register
855 
#define UDP_TXVC        (116) // Transceiver Control Register
856 
// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register --------
857 
#define AT91C_UDP_FRM_NUM         (0x7FF <<  0) // (UDP) Frame Number as Defined in the Packet Field Formats
858 
#define AT91C_UDP_FRM_ERR         (0x1 << 16) // (UDP) Frame Error
859 
#define AT91C_UDP_FRM_OK          (0x1 << 17) // (UDP) Frame OK
860 
// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register --------
861 
#define AT91C_UDP_FADDEN          (0x1 <<  0) // (UDP) Function Address Enable
862 
#define AT91C_UDP_CONFG           (0x1 <<  1) // (UDP) Configured
863 
#define AT91C_UDP_ESR             (0x1 <<  2) // (UDP) Enable Send Resume
864 
#define AT91C_UDP_RSMINPR         (0x1 <<  3) // (UDP) A Resume Has Been Sent to the Host
865 
#define AT91C_UDP_RMWUPE          (0x1 <<  4) // (UDP) Remote Wake Up Enable
866 
// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register --------
867 
#define AT91C_UDP_FADD            (0xFF <<  0) // (UDP) Function Address Value
868 
#define AT91C_UDP_FEN             (0x1 <<  8) // (UDP) Function Enable
869 
// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register --------
870 
#define AT91C_UDP_EPINT0          (0x1 <<  0) // (UDP) Endpoint 0 Interrupt
871 
#define AT91C_UDP_EPINT1          (0x1 <<  1) // (UDP) Endpoint 0 Interrupt
872 
#define AT91C_UDP_EPINT2          (0x1 <<  2) // (UDP) Endpoint 2 Interrupt
873 
#define AT91C_UDP_EPINT3          (0x1 <<  3) // (UDP) Endpoint 3 Interrupt
874 
#define AT91C_UDP_EPINT4          (0x1 <<  4) // (UDP) Endpoint 4 Interrupt
875 
#define AT91C_UDP_EPINT5          (0x1 <<  5) // (UDP) Endpoint 5 Interrupt
876 
#define AT91C_UDP_RXSUSP          (0x1 <<  8) // (UDP) USB Suspend Interrupt
877 
#define AT91C_UDP_RXRSM           (0x1 <<  9) // (UDP) USB Resume Interrupt
878 
#define AT91C_UDP_EXTRSM          (0x1 << 10) // (UDP) USB External Resume Interrupt
879 
#define AT91C_UDP_SOFINT          (0x1 << 11) // (UDP) USB Start Of frame Interrupt
880 
#define AT91C_UDP_WAKEUP          (0x1 << 13) // (UDP) USB Resume Interrupt
881 
// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register --------
882 
// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register --------
883 
// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register --------
884 
#define AT91C_UDP_ENDBUSRES       (0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt
885 
// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register --------
886 
// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register --------
887 
#define AT91C_UDP_EP0             (0x1 <<  0) // (UDP) Reset Endpoint 0
888 
#define AT91C_UDP_EP1             (0x1 <<  1) // (UDP) Reset Endpoint 1
889 
#define AT91C_UDP_EP2             (0x1 <<  2) // (UDP) Reset Endpoint 2
890 
#define AT91C_UDP_EP3             (0x1 <<  3) // (UDP) Reset Endpoint 3
891 
#define AT91C_UDP_EP4             (0x1 <<  4) // (UDP) Reset Endpoint 4
892 
#define AT91C_UDP_EP5             (0x1 <<  5) // (UDP) Reset Endpoint 5
893 
// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register --------
894 
#define AT91C_UDP_TXCOMP          (0x1 <<  0) // (UDP) Generates an IN packet with data previously written in the DPR
895 
#define AT91C_UDP_RX_DATA_BK0     (0x1 <<  1) // (UDP) Receive Data Bank 0
896 
#define AT91C_UDP_RXSETUP         (0x1 <<  2) // (UDP) Sends STALL to the Host (Control endpoints)
897 
#define AT91C_UDP_ISOERROR        (0x1 <<  3) // (UDP) Isochronous error (Isochronous endpoints)
898 
#define AT91C_UDP_TXPKTRDY        (0x1 <<  4) // (UDP) Transmit Packet Ready
899 
#define AT91C_UDP_FORCESTALL      (0x1 <<  5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints).
900 
#define AT91C_UDP_RX_DATA_BK1     (0x1 <<  6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes).
901 
#define AT91C_UDP_DIR             (0x1 <<  7) // (UDP) Transfer Direction
902 
#define AT91C_UDP_EPTYPE          (0x7 <<  8) // (UDP) Endpoint type
903 
#define         AT91C_UDP_EPTYPE_CTRL                 (0x0 <<  8) // (UDP) Control
904 
#define         AT91C_UDP_EPTYPE_ISO_OUT              (0x1 <<  8) // (UDP) Isochronous OUT
905 
#define         AT91C_UDP_EPTYPE_BULK_OUT             (0x2 <<  8) // (UDP) Bulk OUT
906 
#define         AT91C_UDP_EPTYPE_INT_OUT              (0x3 <<  8) // (UDP) Interrupt OUT
907 
#define         AT91C_UDP_EPTYPE_ISO_IN               (0x5 <<  8) // (UDP) Isochronous IN
908 
#define         AT91C_UDP_EPTYPE_BULK_IN              (0x6 <<  8) // (UDP) Bulk IN
909 
#define         AT91C_UDP_EPTYPE_INT_IN               (0x7 <<  8) // (UDP) Interrupt IN
910 
#define AT91C_UDP_DTGLE           (0x1 << 11) // (UDP) Data Toggle
911 
#define AT91C_UDP_EPEDS           (0x1 << 15) // (UDP) Endpoint Enable Disable
912 
#define AT91C_UDP_RXBYTECNT       (0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO
913 
// -------- UDP_TXVC : (UDP Offset: 0x74) Transceiver Control Register --------
914 
#define AT91C_UDP_TXVDIS          (0x1 <<  8) // (UDP)
915 
#define AT91C_UDP_PUON            (0x1 <<  9) // (UDP) Pull-up ON
916 
 
917 
// *****************************************************************************
918 
//              SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface
919 
// *****************************************************************************
920 
// *** Register offset in AT91S_TC structure ***
921 
#define TC_CCR          ( 0) // Channel Control Register
922 
#define TC_CMR          ( 4) // Channel Mode Register (Capture Mode / Waveform Mode)
923 
#define TC_CV           (16) // Counter Value
924 
#define TC_RA           (20) // Register A
925 
#define TC_RB           (24) // Register B
926 
#define TC_RC           (28) // Register C
927 
#define TC_SR           (32) // Status Register
928 
#define TC_IER          (36) // Interrupt Enable Register
929 
#define TC_IDR          (40) // Interrupt Disable Register
930 
#define TC_IMR          (44) // Interrupt Mask Register
931 
// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register --------
932 
#define AT91C_TC_CLKEN            (0x1 <<  0) // (TC) Counter Clock Enable Command
933 
#define AT91C_TC_CLKDIS           (0x1 <<  1) // (TC) Counter Clock Disable Command
934 
#define AT91C_TC_SWTRG            (0x1 <<  2) // (TC) Software Trigger Command
935 
// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode --------
936 
#define AT91C_TC_CLKS             (0x7 <<  0) // (TC) Clock Selection
937 
#define         AT91C_TC_CLKS_TIMER_DIV1_CLOCK     (0x0) // (TC) Clock selected: TIMER_DIV1_CLOCK
938 
#define         AT91C_TC_CLKS_TIMER_DIV2_CLOCK     (0x1) // (TC) Clock selected: TIMER_DIV2_CLOCK
939 
#define         AT91C_TC_CLKS_TIMER_DIV3_CLOCK     (0x2) // (TC) Clock selected: TIMER_DIV3_CLOCK
940 
#define         AT91C_TC_CLKS_TIMER_DIV4_CLOCK     (0x3) // (TC) Clock selected: TIMER_DIV4_CLOCK
941 
#define         AT91C_TC_CLKS_TIMER_DIV5_CLOCK     (0x4) // (TC) Clock selected: TIMER_DIV5_CLOCK
942 
#define         AT91C_TC_CLKS_XC0                  (0x5) // (TC) Clock selected: XC0
943 
#define         AT91C_TC_CLKS_XC1                  (0x6) // (TC) Clock selected: XC1
944 
#define         AT91C_TC_CLKS_XC2                  (0x7) // (TC) Clock selected: XC2
945 
#define AT91C_TC_CLKI             (0x1 <<  3) // (TC) Clock Invert
946 
#define AT91C_TC_BURST            (0x3 <<  4) // (TC) Burst Signal Selection
947 
#define         AT91C_TC_BURST_NONE                 (0x0 <<  4) // (TC) The clock is not gated by an external signal
948 
#define         AT91C_TC_BURST_XC0                  (0x1 <<  4) // (TC) XC0 is ANDed with the selected clock
949 
#define         AT91C_TC_BURST_XC1                  (0x2 <<  4) // (TC) XC1 is ANDed with the selected clock
950 
#define         AT91C_TC_BURST_XC2                  (0x3 <<  4) // (TC) XC2 is ANDed with the selected clock
951 
#define AT91C_TC_CPCSTOP          (0x1 <<  6) // (TC) Counter Clock Stopped with RC Compare
952 
#define AT91C_TC_LDBSTOP          (0x1 <<  6) // (TC) Counter Clock Stopped with RB Loading
953 
#define AT91C_TC_CPCDIS           (0x1 <<  7) // (TC) Counter Clock Disable with RC Compare
954 
#define AT91C_TC_LDBDIS           (0x1 <<  7) // (TC) Counter Clock Disabled with RB Loading
955 
#define AT91C_TC_ETRGEDG          (0x3 <<  8) // (TC) External Trigger Edge Selection
956 
#define         AT91C_TC_ETRGEDG_NONE                 (0x0 <<  8) // (TC) Edge: None
957 
#define         AT91C_TC_ETRGEDG_RISING               (0x1 <<  8) // (TC) Edge: rising edge
958 
#define         AT91C_TC_ETRGEDG_FALLING              (0x2 <<  8) // (TC) Edge: falling edge
959 
#define         AT91C_TC_ETRGEDG_BOTH                 (0x3 <<  8) // (TC) Edge: each edge
960 
#define AT91C_TC_EEVTEDG          (0x3 <<  8) // (TC) External Event Edge Selection
961 
#define         AT91C_TC_EEVTEDG_NONE                 (0x0 <<  8) // (TC) Edge: None
962 
#define         AT91C_TC_EEVTEDG_RISING               (0x1 <<  8) // (TC) Edge: rising edge
963 
#define         AT91C_TC_EEVTEDG_FALLING              (0x2 <<  8) // (TC) Edge: falling edge
964 
#define         AT91C_TC_EEVTEDG_BOTH                 (0x3 <<  8) // (TC) Edge: each edge
965 
#define AT91C_TC_EEVT             (0x3 << 10) // (TC) External Event  Selection
966 
#define         AT91C_TC_EEVT_TIOB                 (0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input
967 
#define         AT91C_TC_EEVT_XC0                  (0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output
968 
#define         AT91C_TC_EEVT_XC1                  (0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output
969 
#define         AT91C_TC_EEVT_XC2                  (0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output
970 
#define AT91C_TC_ABETRG           (0x1 << 10) // (TC) TIOA or TIOB External Trigger Selection
971 
#define AT91C_TC_ENETRG           (0x1 << 12) // (TC) External Event Trigger enable
972 
#define AT91C_TC_WAVESEL          (0x3 << 13) // (TC) Waveform  Selection
973 
#define         AT91C_TC_WAVESEL_UP                   (0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare
974 
#define         AT91C_TC_WAVESEL_UPDOWN               (0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare
975 
#define         AT91C_TC_WAVESEL_UP_AUTO              (0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare
976 
#define         AT91C_TC_WAVESEL_UPDOWN_AUTO          (0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare
977 
#define AT91C_TC_CPCTRG           (0x1 << 14) // (TC) RC Compare Trigger Enable
978 
#define AT91C_TC_WAVE             (0x1 << 15) // (TC)
979 
#define AT91C_TC_ACPA             (0x3 << 16) // (TC) RA Compare Effect on TIOA
980 
#define         AT91C_TC_ACPA_NONE                 (0x0 << 16) // (TC) Effect: none
981 
#define         AT91C_TC_ACPA_SET                  (0x1 << 16) // (TC) Effect: set
982 
#define         AT91C_TC_ACPA_CLEAR                (0x2 << 16) // (TC) Effect: clear
983 
#define         AT91C_TC_ACPA_TOGGLE               (0x3 << 16) // (TC) Effect: toggle
984 
#define AT91C_TC_LDRA             (0x3 << 16) // (TC) RA Loading Selection
985 
#define         AT91C_TC_LDRA_NONE                 (0x0 << 16) // (TC) Edge: None
986 
#define         AT91C_TC_LDRA_RISING               (0x1 << 16) // (TC) Edge: rising edge of TIOA
987 
#define         AT91C_TC_LDRA_FALLING              (0x2 << 16) // (TC) Edge: falling edge of TIOA
988 
#define         AT91C_TC_LDRA_BOTH                 (0x3 << 16) // (TC) Edge: each edge of TIOA
989 
#define AT91C_TC_ACPC             (0x3 << 18) // (TC) RC Compare Effect on TIOA
990 
#define         AT91C_TC_ACPC_NONE                 (0x0 << 18) // (TC) Effect: none
991 
#define         AT91C_TC_ACPC_SET                  (0x1 << 18) // (TC) Effect: set
992 
#define         AT91C_TC_ACPC_CLEAR                (0x2 << 18) // (TC) Effect: clear
993 
#define         AT91C_TC_ACPC_TOGGLE               (0x3 << 18) // (TC) Effect: toggle
994 
#define AT91C_TC_LDRB             (0x3 << 18) // (TC) RB Loading Selection
995 
#define         AT91C_TC_LDRB_NONE                 (0x0 << 18) // (TC) Edge: None
996 
#define         AT91C_TC_LDRB_RISING               (0x1 << 18) // (TC) Edge: rising edge of TIOA
997 
#define         AT91C_TC_LDRB_FALLING              (0x2 << 18) // (TC) Edge: falling edge of TIOA
998 
#define         AT91C_TC_LDRB_BOTH                 (0x3 << 18) // (TC) Edge: each edge of TIOA
999 
#define AT91C_TC_AEEVT            (0x3 << 20) // (TC) External Event Effect on TIOA
1000 
#define         AT91C_TC_AEEVT_NONE                 (0x0 << 20) // (TC) Effect: none
1001 
#define         AT91C_TC_AEEVT_SET                  (0x1 << 20) // (TC) Effect: set
1002 
#define         AT91C_TC_AEEVT_CLEAR                (0x2 << 20) // (TC) Effect: clear
1003 
#define         AT91C_TC_AEEVT_TOGGLE               (0x3 << 20) // (TC) Effect: toggle
1004 
#define AT91C_TC_ASWTRG           (0x3 << 22) // (TC) Software Trigger Effect on TIOA
1005 
#define         AT91C_TC_ASWTRG_NONE                 (0x0 << 22) // (TC) Effect: none
1006 
#define         AT91C_TC_ASWTRG_SET                  (0x1 << 22) // (TC) Effect: set
1007 
#define         AT91C_TC_ASWTRG_CLEAR                (0x2 << 22) // (TC) Effect: clear
1008 
#define         AT91C_TC_ASWTRG_TOGGLE               (0x3 << 22) // (TC) Effect: toggle
1009 
#define AT91C_TC_BCPB             (0x3 << 24) // (TC) RB Compare Effect on TIOB
1010 
#define         AT91C_TC_BCPB_NONE                 (0x0 << 24) // (TC) Effect: none
1011 
#define         AT91C_TC_BCPB_SET                  (0x1 << 24) // (TC) Effect: set
1012 
#define         AT91C_TC_BCPB_CLEAR                (0x2 << 24) // (TC) Effect: clear
1013 
#define         AT91C_TC_BCPB_TOGGLE               (0x3 << 24) // (TC) Effect: toggle
1014 
#define AT91C_TC_BCPC             (0x3 << 26) // (TC) RC Compare Effect on TIOB
1015 
#define         AT91C_TC_BCPC_NONE                 (0x0 << 26) // (TC) Effect: none
1016 
#define         AT91C_TC_BCPC_SET                  (0x1 << 26) // (TC) Effect: set
1017 
#define         AT91C_TC_BCPC_CLEAR                (0x2 << 26) // (TC) Effect: clear
1018 
#define         AT91C_TC_BCPC_TOGGLE               (0x3 << 26) // (TC) Effect: toggle
1019 
#define AT91C_TC_BEEVT            (0x3 << 28) // (TC) External Event Effect on TIOB
1020 
#define         AT91C_TC_BEEVT_NONE                 (0x0 << 28) // (TC) Effect: none
1021 
#define         AT91C_TC_BEEVT_SET                  (0x1 << 28) // (TC) Effect: set
1022 
#define         AT91C_TC_BEEVT_CLEAR                (0x2 << 28) // (TC) Effect: clear
1023 
#define         AT91C_TC_BEEVT_TOGGLE               (0x3 << 28) // (TC) Effect: toggle
1024 
#define AT91C_TC_BSWTRG           (0x3 << 30) // (TC) Software Trigger Effect on TIOB
1025 
#define         AT91C_TC_BSWTRG_NONE                 (0x0 << 30) // (TC) Effect: none
1026 
#define         AT91C_TC_BSWTRG_SET                  (0x1 << 30) // (TC) Effect: set
1027 
#define         AT91C_TC_BSWTRG_CLEAR                (0x2 << 30) // (TC) Effect: clear
1028 
#define         AT91C_TC_BSWTRG_TOGGLE               (0x3 << 30) // (TC) Effect: toggle
1029 
// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register --------
1030 
#define AT91C_TC_COVFS            (0x1 <<  0) // (TC) Counter Overflow
1031 
#define AT91C_TC_LOVRS            (0x1 <<  1) // (TC) Load Overrun
1032 
#define AT91C_TC_CPAS             (0x1 <<  2) // (TC) RA Compare
1033 
#define AT91C_TC_CPBS             (0x1 <<  3) // (TC) RB Compare
1034 
#define AT91C_TC_CPCS             (0x1 <<  4) // (TC) RC Compare
1035 
#define AT91C_TC_LDRAS            (0x1 <<  5) // (TC) RA Loading
1036 
#define AT91C_TC_LDRBS            (0x1 <<  6) // (TC) RB Loading
1037 
#define AT91C_TC_ETRGS            (0x1 <<  7) // (TC) External Trigger
1038 
#define AT91C_TC_CLKSTA           (0x1 << 16) // (TC) Clock Enabling
1039 
#define AT91C_TC_MTIOA            (0x1 << 17) // (TC) TIOA Mirror
1040 
#define AT91C_TC_MTIOB            (0x1 << 18) // (TC) TIOA Mirror
1041 
// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register --------
1042 
// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register --------
1043 
// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register --------
1044 
 
1045 
// *****************************************************************************
1046 
//              SOFTWARE API DEFINITION  FOR Timer Counter Interface
1047 
// *****************************************************************************
1048 
// *** Register offset in AT91S_TCB structure ***
1049 
#define TCB_TC0         ( 0) // TC Channel 0
1050 
#define TCB_TC1         (64) // TC Channel 1
1051 
#define TCB_TC2         (128) // TC Channel 2
1052 
#define TCB_BCR         (192) // TC Block Control Register
1053 
#define TCB_BMR         (196) // TC Block Mode Register
1054 
// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register --------
1055 
#define AT91C_TCB_SYNC            (0x1 <<  0) // (TCB) Synchro Command
1056 
// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register --------
1057 
#define AT91C_TCB_TC0XC0S         (0x3 <<  0) // (TCB) External Clock Signal 0 Selection
1058 
#define         AT91C_TCB_TC0XC0S_TCLK0                (0x0) // (TCB) TCLK0 connected to XC0
1059 
#define         AT91C_TCB_TC0XC0S_NONE                 (0x1) // (TCB) None signal connected to XC0
1060 
#define         AT91C_TCB_TC0XC0S_TIOA1                (0x2) // (TCB) TIOA1 connected to XC0
1061 
#define         AT91C_TCB_TC0XC0S_TIOA2                (0x3) // (TCB) TIOA2 connected to XC0
1062 
#define AT91C_TCB_TC1XC1S         (0x3 <<  2) // (TCB) External Clock Signal 1 Selection
1063 
#define         AT91C_TCB_TC1XC1S_TCLK1                (0x0 <<  2) // (TCB) TCLK1 connected to XC1
1064 
#define         AT91C_TCB_TC1XC1S_NONE                 (0x1 <<  2) // (TCB) None signal connected to XC1
1065 
#define         AT91C_TCB_TC1XC1S_TIOA0                (0x2 <<  2) // (TCB) TIOA0 connected to XC1
1066 
#define         AT91C_TCB_TC1XC1S_TIOA2                (0x3 <<  2) // (TCB) TIOA2 connected to XC1
1067 
#define AT91C_TCB_TC2XC2S         (0x3 <<  4) // (TCB) External Clock Signal 2 Selection
1068 
#define         AT91C_TCB_TC2XC2S_TCLK2                (0x0 <<  4) // (TCB) TCLK2 connected to XC2
1069 
#define         AT91C_TCB_TC2XC2S_NONE                 (0x1 <<  4) // (TCB) None signal connected to XC2
1070 
#define         AT91C_TCB_TC2XC2S_TIOA0                (0x2 <<  4) // (TCB) TIOA0 connected to XC2
1071 
#define         AT91C_TCB_TC2XC2S_TIOA1                (0x3 <<  4) // (TCB) TIOA2 connected to XC2
1072 
 
1073 
// *****************************************************************************
1074 
//              SOFTWARE API DEFINITION  FOR Control Area Network MailBox Interface
1075 
// *****************************************************************************
1076 
// *** Register offset in AT91S_CAN_MB structure ***
1077 
#define CAN_MB_MMR      ( 0) // MailBox Mode Register
1078 
#define CAN_MB_MAM      ( 4) // MailBox Acceptance Mask Register
1079 
#define CAN_MB_MID      ( 8) // MailBox ID Register
1080 
#define CAN_MB_MFID     (12) // MailBox Family ID Register
1081 
#define CAN_MB_MSR      (16) // MailBox Status Register
1082 
#define CAN_MB_MDL      (20) // MailBox Data Low Register
1083 
#define CAN_MB_MDH      (24) // MailBox Data High Register
1084 
#define CAN_MB_MCR      (28) // MailBox Control Register
1085 
// -------- CAN_MMR : (CAN_MB Offset: 0x0) CAN Message Mode Register --------
1086 
#define AT91C_CAN_MTIMEMARK       (0xFFFF <<  0) // (CAN_MB) Mailbox Timemark
1087 
#define AT91C_CAN_PRIOR           (0xF << 16) // (CAN_MB) Mailbox Priority
1088 
#define AT91C_CAN_MOT             (0x7 << 24) // (CAN_MB) Mailbox Object Type
1089 
#define         AT91C_CAN_MOT_DIS                  (0x0 << 24) // (CAN_MB)
1090 
#define         AT91C_CAN_MOT_RX                   (0x1 << 24) // (CAN_MB)
1091 
#define         AT91C_CAN_MOT_RXOVERWRITE          (0x2 << 24) // (CAN_MB)
1092 
#define         AT91C_CAN_MOT_TX                   (0x3 << 24) // (CAN_MB)
1093 
#define         AT91C_CAN_MOT_CONSUMER             (0x4 << 24) // (CAN_MB)
1094 
#define         AT91C_CAN_MOT_PRODUCER             (0x5 << 24) // (CAN_MB)
1095 
// -------- CAN_MAM : (CAN_MB Offset: 0x4) CAN Message Acceptance Mask Register --------
1096 
#define AT91C_CAN_MIDvB           (0x3FFFF <<  0) // (CAN_MB) Complementary bits for identifier in extended mode
1097 
#define AT91C_CAN_MIDvA           (0x7FF << 18) // (CAN_MB) Identifier for standard frame mode
1098 
#define AT91C_CAN_MIDE            (0x1 << 29) // (CAN_MB) Identifier Version
1099 
// -------- CAN_MID : (CAN_MB Offset: 0x8) CAN Message ID Register --------
1100 
// -------- CAN_MFID : (CAN_MB Offset: 0xc) CAN Message Family ID Register --------
1101 
// -------- CAN_MSR : (CAN_MB Offset: 0x10) CAN Message Status Register --------
1102 
#define AT91C_CAN_MTIMESTAMP      (0xFFFF <<  0) // (CAN_MB) Timer Value
1103 
#define AT91C_CAN_MDLC            (0xF << 16) // (CAN_MB) Mailbox Data Length Code
1104 
#define AT91C_CAN_MRTR            (0x1 << 20) // (CAN_MB) Mailbox Remote Transmission Request
1105 
#define AT91C_CAN_MABT            (0x1 << 22) // (CAN_MB) Mailbox Message Abort
1106 
#define AT91C_CAN_MRDY            (0x1 << 23) // (CAN_MB) Mailbox Ready
1107 
#define AT91C_CAN_MMI             (0x1 << 24) // (CAN_MB) Mailbox Message Ignored
1108 
// -------- CAN_MDL : (CAN_MB Offset: 0x14) CAN Message Data Low Register --------
1109 
// -------- CAN_MDH : (CAN_MB Offset: 0x18) CAN Message Data High Register --------
1110 
// -------- CAN_MCR : (CAN_MB Offset: 0x1c) CAN Message Control Register --------
1111 
#define AT91C_CAN_MACR            (0x1 << 22) // (CAN_MB) Abort Request for Mailbox
1112 
#define AT91C_CAN_MTCR            (0x1 << 23) // (CAN_MB) Mailbox Transfer Command
1113 
 
1114 
// *****************************************************************************
1115 
//              SOFTWARE API DEFINITION  FOR Control Area Network Interface
1116 
// *****************************************************************************
1117 
// *** Register offset in AT91S_CAN structure ***
1118 
#define CAN_MR          ( 0) // Mode Register
1119 
#define CAN_IER         ( 4) // Interrupt Enable Register
1120 
#define CAN_IDR         ( 8) // Interrupt Disable Register
1121 
#define CAN_IMR         (12) // Interrupt Mask Register
1122 
#define CAN_SR          (16) // Status Register
1123 
#define CAN_BR          (20) // Baudrate Register
1124 
#define CAN_TIM         (24) // Timer Register
1125 
#define CAN_TIMESTP     (28) // Time Stamp Register
1126 
#define CAN_ECR         (32) // Error Counter Register
1127 
#define CAN_TCR         (36) // Transfer Command Register
1128 
#define CAN_ACR         (40) // Abort Command Register
1129 
#define CAN_VR          (252) // Version Register
1130 
#define CAN_MB0         (512) // CAN Mailbox 0
1131 
#define CAN_MB1         (544) // CAN Mailbox 1
1132 
#define CAN_MB2         (576) // CAN Mailbox 2
1133 
#define CAN_MB3         (608) // CAN Mailbox 3
1134 
#define CAN_MB4         (640) // CAN Mailbox 4
1135 
#define CAN_MB5         (672) // CAN Mailbox 5
1136 
#define CAN_MB6         (704) // CAN Mailbox 6
1137 
#define CAN_MB7         (736) // CAN Mailbox 7
1138 
#define CAN_MB8         (768) // CAN Mailbox 8
1139 
#define CAN_MB9         (800) // CAN Mailbox 9
1140 
#define CAN_MB10        (832) // CAN Mailbox 10
1141 
#define CAN_MB11        (864) // CAN Mailbox 11
1142 
#define CAN_MB12        (896) // CAN Mailbox 12
1143 
#define CAN_MB13        (928) // CAN Mailbox 13
1144 
#define CAN_MB14        (960) // CAN Mailbox 14
1145 
#define CAN_MB15        (992) // CAN Mailbox 15
1146 
// -------- CAN_MR : (CAN Offset: 0x0) CAN Mode Register --------
1147 
#define AT91C_CAN_CANEN           (0x1 <<  0) // (CAN) CAN Controller Enable
1148 
#define AT91C_CAN_LPM             (0x1 <<  1) // (CAN) Disable/Enable Low Power Mode
1149 
#define AT91C_CAN_ABM             (0x1 <<  2) // (CAN) Disable/Enable Autobaud/Listen Mode
1150 
#define AT91C_CAN_OVL             (0x1 <<  3) // (CAN) Disable/Enable Overload Frame
1151 
#define AT91C_CAN_TEOF            (0x1 <<  4) // (CAN) Time Stamp messages at each end of Frame
1152 
#define AT91C_CAN_TTM             (0x1 <<  5) // (CAN) Disable/Enable Time Trigger Mode
1153 
#define AT91C_CAN_TIMFRZ          (0x1 <<  6) // (CAN) Enable Timer Freeze
1154 
#define AT91C_CAN_DRPT            (0x1 <<  7) // (CAN) Disable Repeat
1155 
// -------- CAN_IER : (CAN Offset: 0x4) CAN Interrupt Enable Register --------
1156 
#define AT91C_CAN_MB0             (0x1 <<  0) // (CAN) Mailbox 0 Flag
1157 
#define AT91C_CAN_MB1             (0x1 <<  1) // (CAN) Mailbox 1 Flag
1158 
#define AT91C_CAN_MB2             (0x1 <<  2) // (CAN) Mailbox 2 Flag
1159 
#define AT91C_CAN_MB3             (0x1 <<  3) // (CAN) Mailbox 3 Flag
1160 
#define AT91C_CAN_MB4             (0x1 <<  4) // (CAN) Mailbox 4 Flag
1161 
#define AT91C_CAN_MB5             (0x1 <<  5) // (CAN) Mailbox 5 Flag
1162 
#define AT91C_CAN_MB6             (0x1 <<  6) // (CAN) Mailbox 6 Flag
1163 
#define AT91C_CAN_MB7             (0x1 <<  7) // (CAN) Mailbox 7 Flag
1164 
#define AT91C_CAN_MB8             (0x1 <<  8) // (CAN) Mailbox 8 Flag
1165 
#define AT91C_CAN_MB9             (0x1 <<  9) // (CAN) Mailbox 9 Flag
1166 
#define AT91C_CAN_MB10            (0x1 << 10) // (CAN) Mailbox 10 Flag
1167 
#define AT91C_CAN_MB11            (0x1 << 11) // (CAN) Mailbox 11 Flag
1168 
#define AT91C_CAN_MB12            (0x1 << 12) // (CAN) Mailbox 12 Flag
1169 
#define AT91C_CAN_MB13            (0x1 << 13) // (CAN) Mailbox 13 Flag
1170 
#define AT91C_CAN_MB14            (0x1 << 14) // (CAN) Mailbox 14 Flag
1171 
#define AT91C_CAN_MB15            (0x1 << 15) // (CAN) Mailbox 15 Flag
1172 
#define AT91C_CAN_ERRA            (0x1 << 16) // (CAN) Error Active Mode Flag
1173 
#define AT91C_CAN_WARN            (0x1 << 17) // (CAN) Warning Limit Flag
1174 
#define AT91C_CAN_ERRP            (0x1 << 18) // (CAN) Error Passive Mode Flag
1175 
#define AT91C_CAN_BOFF            (0x1 << 19) // (CAN) Bus Off Mode Flag
1176 
#define AT91C_CAN_SLEEP           (0x1 << 20) // (CAN) Sleep Flag
1177 
#define AT91C_CAN_WAKEUP          (0x1 << 21) // (CAN) Wakeup Flag
1178 
#define AT91C_CAN_TOVF            (0x1 << 22) // (CAN) Timer Overflow Flag
1179 
#define AT91C_CAN_TSTP            (0x1 << 23) // (CAN) Timestamp Flag
1180 
#define AT91C_CAN_CERR            (0x1 << 24) // (CAN) CRC Error
1181 
#define AT91C_CAN_SERR            (0x1 << 25) // (CAN) Stuffing Error
1182 
#define AT91C_CAN_AERR            (0x1 << 26) // (CAN) Acknowledgment Error
1183 
#define AT91C_CAN_FERR            (0x1 << 27) // (CAN) Form Error
1184 
#define AT91C_CAN_BERR            (0x1 << 28) // (CAN) Bit Error
1185 
// -------- CAN_IDR : (CAN Offset: 0x8) CAN Interrupt Disable Register --------
1186 
// -------- CAN_IMR : (CAN Offset: 0xc) CAN Interrupt Mask Register --------
1187 
// -------- CAN_SR : (CAN Offset: 0x10) CAN Status Register --------
1188 
#define AT91C_CAN_RBSY            (0x1 << 29) // (CAN) Receiver Busy
1189 
#define AT91C_CAN_TBSY            (0x1 << 30) // (CAN) Transmitter Busy
1190 
#define AT91C_CAN_OVLY            (0x1 << 31) // (CAN) Overload Busy
1191 
// -------- CAN_BR : (CAN Offset: 0x14) CAN Baudrate Register --------
1192 
#define AT91C_CAN_PHASE2          (0x7 <<  0) // (CAN) Phase 2 segment
1193 
#define AT91C_CAN_PHASE1          (0x7 <<  4) // (CAN) Phase 1 segment
1194 
#define AT91C_CAN_PROPAG          (0x7 <<  8) // (CAN) Programmation time segment
1195 
#define AT91C_CAN_SYNC            (0x3 << 12) // (CAN) Re-synchronization jump width segment
1196 
#define AT91C_CAN_BRP             (0x7F << 16) // (CAN) Baudrate Prescaler
1197 
#define AT91C_CAN_SMP             (0x1 << 24) // (CAN) Sampling mode
1198 
// -------- CAN_TIM : (CAN Offset: 0x18) CAN Timer Register --------
1199 
#define AT91C_CAN_TIMER           (0xFFFF <<  0) // (CAN) Timer field
1200 
// -------- CAN_TIMESTP : (CAN Offset: 0x1c) CAN Timestamp Register --------
1201 
// -------- CAN_ECR : (CAN Offset: 0x20) CAN Error Counter Register --------
1202 
#define AT91C_CAN_REC             (0xFF <<  0) // (CAN) Receive Error Counter
1203 
#define AT91C_CAN_TEC             (0xFF << 16) // (CAN) Transmit Error Counter
1204 
// -------- CAN_TCR : (CAN Offset: 0x24) CAN Transfer Command Register --------
1205 
#define AT91C_CAN_TIMRST          (0x1 << 31) // (CAN) Timer Reset Field
1206 
// -------- CAN_ACR : (CAN Offset: 0x28) CAN Abort Command Register --------
1207 
 
1208 
// *****************************************************************************
1209 
//              SOFTWARE API DEFINITION  FOR Ethernet MAC 10/100
1210 
// *****************************************************************************
1211 
// *** Register offset in AT91S_EMAC structure ***
1212 
#define EMAC_NCR        ( 0) // Network Control Register
1213 
#define EMAC_NCFGR      ( 4) // Network Configuration Register
1214 
#define EMAC_NSR        ( 8) // Network Status Register
1215 
#define EMAC_TSR        (20) // Transmit Status Register
1216 
#define EMAC_RBQP       (24) // Receive Buffer Queue Pointer
1217 
#define EMAC_TBQP       (28) // Transmit Buffer Queue Pointer
1218 
#define EMAC_RSR        (32) // Receive Status Register
1219 
#define EMAC_ISR        (36) // Interrupt Status Register
1220 
#define EMAC_IER        (40) // Interrupt Enable Register
1221 
#define EMAC_IDR        (44) // Interrupt Disable Register
1222 
#define EMAC_IMR        (48) // Interrupt Mask Register
1223 
#define EMAC_MAN        (52) // PHY Maintenance Register
1224 
#define EMAC_PTR        (56) // Pause Time Register
1225 
#define EMAC_PFR        (60) // Pause Frames received Register
1226 
#define EMAC_FTO        (64) // Frames Transmitted OK Register
1227 
#define EMAC_SCF        (68) // Single Collision Frame Register
1228 
#define EMAC_MCF        (72) // Multiple Collision Frame Register
1229 
#define EMAC_FRO        (76) // Frames Received OK Register
1230 
#define EMAC_FCSE       (80) // Frame Check Sequence Error Register
1231 
#define EMAC_ALE        (84) // Alignment Error Register
1232 
#define EMAC_DTF        (88) // Deferred Transmission Frame Register
1233 
#define EMAC_LCOL       (92) // Late Collision Register
1234 
#define EMAC_ECOL       (96) // Excessive Collision Register
1235 
#define EMAC_TUND       (100) // Transmit Underrun Error Register
1236 
#define EMAC_CSE        (104) // Carrier Sense Error Register
1237 
#define EMAC_RRE        (108) // Receive Ressource Error Register
1238 
#define EMAC_ROV        (112) // Receive Overrun Errors Register
1239 
#define EMAC_RSE        (116) // Receive Symbol Errors Register
1240 
#define EMAC_ELE        (120) // Excessive Length Errors Register
1241 
#define EMAC_RJA        (124) // Receive Jabbers Register
1242 
#define EMAC_USF        (128) // Undersize Frames Register
1243 
#define EMAC_STE        (132) // SQE Test Error Register
1244 
#define EMAC_RLE        (136) // Receive Length Field Mismatch Register
1245 
#define EMAC_TPF        (140) // Transmitted Pause Frames Register
1246 
#define EMAC_HRB        (144) // Hash Address Bottom[31:0]
1247 
#define EMAC_HRT        (148) // Hash Address Top[63:32]
1248 
#define EMAC_SA1L       (152) // Specific Address 1 Bottom, First 4 bytes
1249 
#define EMAC_SA1H       (156) // Specific Address 1 Top, Last 2 bytes
1250 
#define EMAC_SA2L       (160) // Specific Address 2 Bottom, First 4 bytes
1251 
#define EMAC_SA2H       (164) // Specific Address 2 Top, Last 2 bytes
1252 
#define EMAC_SA3L       (168) // Specific Address 3 Bottom, First 4 bytes
1253 
#define EMAC_SA3H       (172) // Specific Address 3 Top, Last 2 bytes
1254 
#define EMAC_SA4L       (176) // Specific Address 4 Bottom, First 4 bytes
1255 
#define EMAC_SA4H       (180) // Specific Address 4 Top, Last 2 bytes
1256 
#define EMAC_TID        (184) // Type ID Checking Register
1257 
#define EMAC_TPQ        (188) // Transmit Pause Quantum Register
1258 
#define EMAC_USRIO      (192) // USER Input/Output Register
1259 
#define EMAC_WOL        (196) // Wake On LAN Register
1260 
#define EMAC_REV        (252) // Revision Register
1261 
// -------- EMAC_NCR : (EMAC Offset: 0x0)  --------
1262 
#define AT91C_EMAC_LB             (0x1 <<  0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level.
1263 
#define AT91C_EMAC_LLB            (0x1 <<  1) // (EMAC) Loopback local.
1264 
#define AT91C_EMAC_RE             (0x1 <<  2) // (EMAC) Receive enable.
1265 
#define AT91C_EMAC_TE             (0x1 <<  3) // (EMAC) Transmit enable.
1266 
#define AT91C_EMAC_MPE            (0x1 <<  4) // (EMAC) Management port enable.
1267 
#define AT91C_EMAC_CLRSTAT        (0x1 <<  5) // (EMAC) Clear statistics registers.
1268 
#define AT91C_EMAC_INCSTAT        (0x1 <<  6) // (EMAC) Increment statistics registers.
1269 
#define AT91C_EMAC_WESTAT         (0x1 <<  7) // (EMAC) Write enable for statistics registers.
1270 
#define AT91C_EMAC_BP             (0x1 <<  8) // (EMAC) Back pressure.
1271 
#define AT91C_EMAC_TSTART         (0x1 <<  9) // (EMAC) Start Transmission.
1272 
#define AT91C_EMAC_THALT          (0x1 << 10) // (EMAC) Transmission Halt.
1273 
#define AT91C_EMAC_TPFR           (0x1 << 11) // (EMAC) Transmit pause frame
1274 
#define AT91C_EMAC_TZQ            (0x1 << 12) // (EMAC) Transmit zero quantum pause frame
1275 
// -------- EMAC_NCFGR : (EMAC Offset: 0x4) Network Configuration Register --------
1276 
#define AT91C_EMAC_SPD            (0x1 <<  0) // (EMAC) Speed.
1277 
#define AT91C_EMAC_FD             (0x1 <<  1) // (EMAC) Full duplex.
1278 
#define AT91C_EMAC_JFRAME         (0x1 <<  3) // (EMAC) Jumbo Frames.
1279 
#define AT91C_EMAC_CAF            (0x1 <<  4) // (EMAC) Copy all frames.
1280 
#define AT91C_EMAC_NBC            (0x1 <<  5) // (EMAC) No broadcast.
1281 
#define AT91C_EMAC_MTI            (0x1 <<  6) // (EMAC) Multicast hash event enable
1282 
#define AT91C_EMAC_UNI            (0x1 <<  7) // (EMAC) Unicast hash enable.
1283 
#define AT91C_EMAC_BIG            (0x1 <<  8) // (EMAC) Receive 1522 bytes.
1284 
#define AT91C_EMAC_EAE            (0x1 <<  9) // (EMAC) External address match enable.
1285 
#define AT91C_EMAC_CLK            (0x3 << 10) // (EMAC)
1286 
#define         AT91C_EMAC_CLK_HCLK_8               (0x0 << 10) // (EMAC) HCLK divided by 8
1287 
#define         AT91C_EMAC_CLK_HCLK_16              (0x1 << 10) // (EMAC) HCLK divided by 16
1288 
#define         AT91C_EMAC_CLK_HCLK_32              (0x2 << 10) // (EMAC) HCLK divided by 32
1289 
#define         AT91C_EMAC_CLK_HCLK_64              (0x3 << 10) // (EMAC) HCLK divided by 64
1290 
#define AT91C_EMAC_RTY            (0x1 << 12) // (EMAC)
1291 
#define AT91C_EMAC_PAE            (0x1 << 13) // (EMAC)
1292 
#define AT91C_EMAC_RBOF           (0x3 << 14) // (EMAC)
1293 
#define         AT91C_EMAC_RBOF_OFFSET_0             (0x0 << 14) // (EMAC) no offset from start of receive buffer
1294 
#define         AT91C_EMAC_RBOF_OFFSET_1             (0x1 << 14) // (EMAC) one byte offset from start of receive buffer
1295 
#define         AT91C_EMAC_RBOF_OFFSET_2             (0x2 << 14) // (EMAC) two bytes offset from start of receive buffer
1296 
#define         AT91C_EMAC_RBOF_OFFSET_3             (0x3 << 14) // (EMAC) three bytes offset from start of receive buffer
1297 
#define AT91C_EMAC_RLCE           (0x1 << 16) // (EMAC) Receive Length field Checking Enable
1298 
#define AT91C_EMAC_DRFCS          (0x1 << 17) // (EMAC) Discard Receive FCS
1299 
#define AT91C_EMAC_EFRHD          (0x1 << 18) // (EMAC)
1300 
#define AT91C_EMAC_IRXFCS         (0x1 << 19) // (EMAC) Ignore RX FCS
1301 
// -------- EMAC_NSR : (EMAC Offset: 0x8) Network Status Register --------
1302 
#define AT91C_EMAC_LINKR          (0x1 <<  0) // (EMAC)
1303 
#define AT91C_EMAC_MDIO           (0x1 <<  1) // (EMAC)
1304 
#define AT91C_EMAC_IDLE           (0x1 <<  2) // (EMAC)
1305 
// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Status Register --------
1306 
#define AT91C_EMAC_UBR            (0x1 <<  0) // (EMAC)
1307 
#define AT91C_EMAC_COL            (0x1 <<  1) // (EMAC)
1308 
#define AT91C_EMAC_RLES           (0x1 <<  2) // (EMAC)
1309 
#define AT91C_EMAC_TGO            (0x1 <<  3) // (EMAC) Transmit Go
1310 
#define AT91C_EMAC_BEX            (0x1 <<  4) // (EMAC) Buffers exhausted mid frame
1311 
#define AT91C_EMAC_COMP           (0x1 <<  5) // (EMAC)
1312 
#define AT91C_EMAC_UND            (0x1 <<  6) // (EMAC)
1313 
// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register --------
1314 
#define AT91C_EMAC_BNA            (0x1 <<  0) // (EMAC)
1315 
#define AT91C_EMAC_REC            (0x1 <<  1) // (EMAC)
1316 
#define AT91C_EMAC_OVR            (0x1 <<  2) // (EMAC)
1317 
// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register --------
1318 
#define AT91C_EMAC_MFD            (0x1 <<  0) // (EMAC)
1319 
#define AT91C_EMAC_RCOMP          (0x1 <<  1) // (EMAC)
1320 
#define AT91C_EMAC_RXUBR          (0x1 <<  2) // (EMAC)
1321 
#define AT91C_EMAC_TXUBR          (0x1 <<  3) // (EMAC)
1322 
#define AT91C_EMAC_TUNDR          (0x1 <<  4) // (EMAC)
1323 
#define AT91C_EMAC_RLEX           (0x1 <<  5) // (EMAC)
1324 
#define AT91C_EMAC_TXERR          (0x1 <<  6) // (EMAC)
1325 
#define AT91C_EMAC_TCOMP          (0x1 <<  7) // (EMAC)
1326 
#define AT91C_EMAC_LINK           (0x1 <<  9) // (EMAC)
1327 
#define AT91C_EMAC_ROVR           (0x1 << 10) // (EMAC)
1328 
#define AT91C_EMAC_HRESP          (0x1 << 11) // (EMAC)
1329 
#define AT91C_EMAC_PFRE           (0x1 << 12) // (EMAC)
1330 
#define AT91C_EMAC_PTZ            (0x1 << 13) // (EMAC)
1331 
// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register --------
1332 
// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register --------
1333 
// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register --------
1334 
// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register --------
1335 
#define AT91C_EMAC_DATA           (0xFFFF <<  0) // (EMAC)
1336 
#define AT91C_EMAC_CODE           (0x3 << 16) // (EMAC)
1337 
#define AT91C_EMAC_REGA           (0x1F << 18) // (EMAC)
1338 
#define AT91C_EMAC_PHYA           (0x1F << 23) // (EMAC)
1339 
#define AT91C_EMAC_RW             (0x3 << 28) // (EMAC)
1340 
#define AT91C_EMAC_SOF            (0x3 << 30) // (EMAC)
1341 
// -------- EMAC_USRIO : (EMAC Offset: 0xc0) USER Input Output Register --------
1342 
#define AT91C_EMAC_RMII           (0x1 <<  0) // (EMAC) Reduce MII
1343 
// -------- EMAC_WOL : (EMAC Offset: 0xc4) Wake On LAN Register --------
1344 
#define AT91C_EMAC_IP             (0xFFFF <<  0) // (EMAC) ARP request IP address
1345 
#define AT91C_EMAC_MAG            (0x1 << 16) // (EMAC) Magic packet event enable
1346 
#define AT91C_EMAC_ARP            (0x1 << 17) // (EMAC) ARP request event enable
1347 
#define AT91C_EMAC_SA1            (0x1 << 18) // (EMAC) Specific address register 1 event enable
1348 
// -------- EMAC_REV : (EMAC Offset: 0xfc) Revision Register --------
1349 
#define AT91C_EMAC_REVREF         (0xFFFF <<  0) // (EMAC)
1350 
#define AT91C_EMAC_PARTREF        (0xFFFF << 16) // (EMAC)
1351 
 
1352 
// *****************************************************************************
1353 
//              SOFTWARE API DEFINITION  FOR Analog to Digital Convertor
1354 
// *****************************************************************************
1355 
// *** Register offset in AT91S_ADC structure ***
1356 
#define ADC_CR          ( 0) // ADC Control Register
1357 
#define ADC_MR          ( 4) // ADC Mode Register
1358 
#define ADC_CHER        (16) // ADC Channel Enable Register
1359 
#define ADC_CHDR        (20) // ADC Channel Disable Register
1360 
#define ADC_CHSR        (24) // ADC Channel Status Register
1361 
#define ADC_SR          (28) // ADC Status Register
1362 
#define ADC_LCDR        (32) // ADC Last Converted Data Register
1363 
#define ADC_IER         (36) // ADC Interrupt Enable Register
1364 
#define ADC_IDR         (40) // ADC Interrupt Disable Register
1365 
#define ADC_IMR         (44) // ADC Interrupt Mask Register
1366 
#define ADC_CDR0        (48) // ADC Channel Data Register 0
1367 
#define ADC_CDR1        (52) // ADC Channel Data Register 1
1368 
#define ADC_CDR2        (56) // ADC Channel Data Register 2
1369 
#define ADC_CDR3        (60) // ADC Channel Data Register 3
1370 
#define ADC_CDR4        (64) // ADC Channel Data Register 4
1371 
#define ADC_CDR5        (68) // ADC Channel Data Register 5
1372 
#define ADC_CDR6        (72) // ADC Channel Data Register 6
1373 
#define ADC_CDR7        (76) // ADC Channel Data Register 7
1374 
#define ADC_RPR         (256) // Receive Pointer Register
1375 
#define ADC_RCR         (260) // Receive Counter Register
1376 
#define ADC_TPR         (264) // Transmit Pointer Register
1377 
#define ADC_TCR         (268) // Transmit Counter Register
1378 
#define ADC_RNPR        (272) // Receive Next Pointer Register
1379 
#define ADC_RNCR        (276) // Receive Next Counter Register
1380 
#define ADC_TNPR        (280) // Transmit Next Pointer Register
1381 
#define ADC_TNCR        (284) // Transmit Next Counter Register
1382 
#define ADC_PTCR        (288) // PDC Transfer Control Register
1383 
#define ADC_PTSR        (292) // PDC Transfer Status Register
1384 
// -------- ADC_CR : (ADC Offset: 0x0) ADC Control Register --------
1385 
#define AT91C_ADC_SWRST           (0x1 <<  0) // (ADC) Software Reset
1386 
#define AT91C_ADC_START           (0x1 <<  1) // (ADC) Start Conversion
1387 
// -------- ADC_MR : (ADC Offset: 0x4) ADC Mode Register --------
1388 
#define AT91C_ADC_TRGEN           (0x1 <<  0) // (ADC) Trigger Enable
1389 
#define         AT91C_ADC_TRGEN_DIS                  (0x0) // (ADC) Hradware triggers are disabled. Starting a conversion is only possible by software
1390 
#define         AT91C_ADC_TRGEN_EN                   (0x1) // (ADC) Hardware trigger selected by TRGSEL field is enabled.
1391 
#define AT91C_ADC_TRGSEL          (0x7 <<  1) // (ADC) Trigger Selection
1392 
#define         AT91C_ADC_TRGSEL_TIOA0                (0x0 <<  1) // (ADC) Selected TRGSEL = TIAO0
1393 
#define         AT91C_ADC_TRGSEL_TIOA1                (0x1 <<  1) // (ADC) Selected TRGSEL = TIAO1
1394 
#define         AT91C_ADC_TRGSEL_TIOA2                (0x2 <<  1) // (ADC) Selected TRGSEL = TIAO2
1395 
#define         AT91C_ADC_TRGSEL_TIOA3                (0x3 <<  1) // (ADC) Selected TRGSEL = TIAO3
1396 
#define         AT91C_ADC_TRGSEL_TIOA4                (0x4 <<  1) // (ADC) Selected TRGSEL = TIAO4
1397 
#define         AT91C_ADC_TRGSEL_TIOA5                (0x5 <<  1) // (ADC) Selected TRGSEL = TIAO5
1398 
#define         AT91C_ADC_TRGSEL_EXT                  (0x6 <<  1) // (ADC) Selected TRGSEL = External Trigger
1399 
#define AT91C_ADC_LOWRES          (0x1 <<  4) // (ADC) Resolution.
1400 
#define         AT91C_ADC_LOWRES_10_BIT               (0x0 <<  4) // (ADC) 10-bit resolution
1401 
#define         AT91C_ADC_LOWRES_8_BIT                (0x1 <<  4) // (ADC) 8-bit resolution
1402 
#define AT91C_ADC_SLEEP           (0x1 <<  5) // (ADC) Sleep Mode
1403 
#define         AT91C_ADC_SLEEP_NORMAL_MODE          (0x0 <<  5) // (ADC) Normal Mode
1404 
#define         AT91C_ADC_SLEEP_MODE                 (0x1 <<  5) // (ADC) Sleep Mode
1405 
#define AT91C_ADC_PRESCAL         (0x3F <<  8) // (ADC) Prescaler rate selection
1406 
#define AT91C_ADC_STARTUP         (0x1F << 16) // (ADC) Startup Time
1407 
#define AT91C_ADC_SHTIM           (0xF << 24) // (ADC) Sample & Hold Time
1408 
// --------     ADC_CHER : (ADC Offset: 0x10) ADC Channel Enable Register --------
1409 
#define AT91C_ADC_CH0             (0x1 <<  0) // (ADC) Channel 0
1410 
#define AT91C_ADC_CH1             (0x1 <<  1) // (ADC) Channel 1
1411 
#define AT91C_ADC_CH2             (0x1 <<  2) // (ADC) Channel 2
1412 
#define AT91C_ADC_CH3             (0x1 <<  3) // (ADC) Channel 3
1413 
#define AT91C_ADC_CH4             (0x1 <<  4) // (ADC) Channel 4
1414 
#define AT91C_ADC_CH5             (0x1 <<  5) // (ADC) Channel 5
1415 
#define AT91C_ADC_CH6             (0x1 <<  6) // (ADC) Channel 6
1416 
#define AT91C_ADC_CH7             (0x1 <<  7) // (ADC) Channel 7
1417 
// --------     ADC_CHDR : (ADC Offset: 0x14) ADC Channel Disable Register --------
1418 
// --------     ADC_CHSR : (ADC Offset: 0x18) ADC Channel Status Register --------
1419 
// -------- ADC_SR : (ADC Offset: 0x1c) ADC Status Register --------
1420 
#define AT91C_ADC_EOC0            (0x1 <<  0) // (ADC) End of Conversion
1421 
#define AT91C_ADC_EOC1            (0x1 <<  1) // (ADC) End of Conversion
1422 
#define AT91C_ADC_EOC2            (0x1 <<  2) // (ADC) End of Conversion
1423 
#define AT91C_ADC_EOC3            (0x1 <<  3) // (ADC) End of Conversion
1424 
#define AT91C_ADC_EOC4            (0x1 <<  4) // (ADC) End of Conversion
1425 
#define AT91C_ADC_EOC5            (0x1 <<  5) // (ADC) End of Conversion
1426 
#define AT91C_ADC_EOC6            (0x1 <<  6) // (ADC) End of Conversion
1427 
#define AT91C_ADC_EOC7            (0x1 <<  7) // (ADC) End of Conversion
1428 
#define AT91C_ADC_OVRE0           (0x1 <<  8) // (ADC) Overrun Error
1429 
#define AT91C_ADC_OVRE1           (0x1 <<  9) // (ADC) Overrun Error
1430 
#define AT91C_ADC_OVRE2           (0x1 << 10) // (ADC) Overrun Error
1431 
#define AT91C_ADC_OVRE3           (0x1 << 11) // (ADC) Overrun Error
1432 
#define AT91C_ADC_OVRE4           (0x1 << 12) // (ADC) Overrun Error
1433 
#define AT91C_ADC_OVRE5           (0x1 << 13) // (ADC) Overrun Error
1434 
#define AT91C_ADC_OVRE6           (0x1 << 14) // (ADC) Overrun Error
1435 
#define AT91C_ADC_OVRE7           (0x1 << 15) // (ADC) Overrun Error
1436 
#define AT91C_ADC_DRDY            (0x1 << 16) // (ADC) Data Ready
1437 
#define AT91C_ADC_GOVRE           (0x1 << 17) // (ADC) General Overrun
1438 
#define AT91C_ADC_ENDRX           (0x1 << 18) // (ADC) End of Receiver Transfer
1439 
#define AT91C_ADC_RXBUFF          (0x1 << 19) // (ADC) RXBUFF Interrupt
1440 
// -------- ADC_LCDR : (ADC Offset: 0x20) ADC Last Converted Data Register --------
1441 
#define AT91C_ADC_LDATA           (0x3FF <<  0) // (ADC) Last Data Converted
1442 
// -------- ADC_IER : (ADC Offset: 0x24) ADC Interrupt Enable Register --------
1443 
// -------- ADC_IDR : (ADC Offset: 0x28) ADC Interrupt Disable Register --------
1444 
// -------- ADC_IMR : (ADC Offset: 0x2c) ADC Interrupt Mask Register --------
1445 
// -------- ADC_CDR0 : (ADC Offset: 0x30) ADC Channel Data Register 0 --------
1446 
#define AT91C_ADC_DATA            (0x3FF <<  0) // (ADC) Converted Data
1447 
// -------- ADC_CDR1 : (ADC Offset: 0x34) ADC Channel Data Register 1 --------
1448 
// -------- ADC_CDR2 : (ADC Offset: 0x38) ADC Channel Data Register 2 --------
1449 
// -------- ADC_CDR3 : (ADC Offset: 0x3c) ADC Channel Data Register 3 --------
1450 
// -------- ADC_CDR4 : (ADC Offset: 0x40) ADC Channel Data Register 4 --------
1451 
// -------- ADC_CDR5 : (ADC Offset: 0x44) ADC Channel Data Register 5 --------
1452 
// -------- ADC_CDR6 : (ADC Offset: 0x48) ADC Channel Data Register 6 --------
1453 
// -------- ADC_CDR7 : (ADC Offset: 0x4c) ADC Channel Data Register 7 --------
1454 
 
1455 
// *****************************************************************************
1456 
//              SOFTWARE API DEFINITION  FOR Advanced  Encryption Standard
1457 
// *****************************************************************************
1458 
// *** Register offset in AT91S_AES structure ***
1459 
#define AES_CR          ( 0) // Control Register
1460 
#define AES_MR          ( 4) // Mode Register
1461 
#define AES_IER         (16) // Interrupt Enable Register
1462 
#define AES_IDR         (20) // Interrupt Disable Register
1463 
#define AES_IMR         (24) // Interrupt Mask Register
1464 
#define AES_ISR         (28) // Interrupt Status Register
1465 
#define AES_KEYWxR      (32) // Key Word x Register
1466 
#define AES_IDATAxR     (64) // Input Data x Register
1467 
#define AES_ODATAxR     (80) // Output Data x Register
1468 
#define AES_IVxR        (96) // Initialization Vector x Register
1469 
#define AES_VR          (252) // AES Version Register
1470 
#define AES_RPR         (256) // Receive Pointer Register
1471 
#define AES_RCR         (260) // Receive Counter Register
1472 
#define AES_TPR         (264) // Transmit Pointer Register
1473 
#define AES_TCR         (268) // Transmit Counter Register
1474 
#define AES_RNPR        (272) // Receive Next Pointer Register
1475 
#define AES_RNCR        (276) // Receive Next Counter Register
1476 
#define AES_TNPR        (280) // Transmit Next Pointer Register
1477 
#define AES_TNCR        (284) // Transmit Next Counter Register
1478 
#define AES_PTCR        (288) // PDC Transfer Control Register
1479 
#define AES_PTSR        (292) // PDC Transfer Status Register
1480 
// -------- AES_CR : (AES Offset: 0x0) Control Register --------
1481 
#define AT91C_AES_START           (0x1 <<  0) // (AES) Starts Processing
1482 
#define AT91C_AES_SWRST           (0x1 <<  8) // (AES) Software Reset
1483 
#define AT91C_AES_LOADSEED        (0x1 << 16) // (AES) Random Number Generator Seed Loading
1484 
// -------- AES_MR : (AES Offset: 0x4) Mode Register --------
1485 
#define AT91C_AES_CIPHER          (0x1 <<  0) // (AES) Processing Mode
1486 
#define AT91C_AES_PROCDLY         (0xF <<  4) // (AES) Processing Delay
1487 
#define AT91C_AES_SMOD            (0x3 <<  8) // (AES) Start Mode
1488 
#define         AT91C_AES_SMOD_MANUAL               (0x0 <<  8) // (AES) Manual Mode: The START bit in register AES_CR must be set to begin encryption or decryption.
1489 
#define         AT91C_AES_SMOD_AUTO                 (0x1 <<  8) // (AES) Auto Mode: no action in AES_CR is necessary (cf datasheet).
1490 
#define         AT91C_AES_SMOD_PDC                  (0x2 <<  8) // (AES) PDC Mode (cf datasheet).
1491 
#define AT91C_AES_OPMOD           (0x7 << 12) // (AES) Operation Mode
1492 
#define         AT91C_AES_OPMOD_ECB                  (0x0 << 12) // (AES) ECB Electronic CodeBook mode.
1493 
#define         AT91C_AES_OPMOD_CBC                  (0x1 << 12) // (AES) CBC Cipher Block Chaining mode.
1494 
#define         AT91C_AES_OPMOD_OFB                  (0x2 << 12) // (AES) OFB Output Feedback mode.
1495 
#define         AT91C_AES_OPMOD_CFB                  (0x3 << 12) // (AES) CFB Cipher Feedback mode.
1496 
#define         AT91C_AES_OPMOD_CTR                  (0x4 << 12) // (AES) CTR Counter mode.
1497 
#define AT91C_AES_LOD             (0x1 << 15) // (AES) Last Output Data Mode
1498 
#define AT91C_AES_CFBS            (0x7 << 16) // (AES) Cipher Feedback Data Size
1499 
#define         AT91C_AES_CFBS_128_BIT              (0x0 << 16) // (AES) 128-bit.
1500 
#define         AT91C_AES_CFBS_64_BIT               (0x1 << 16) // (AES) 64-bit.
1501 
#define         AT91C_AES_CFBS_32_BIT               (0x2 << 16) // (AES) 32-bit.
1502 
#define         AT91C_AES_CFBS_16_BIT               (0x3 << 16) // (AES) 16-bit.
1503 
#define         AT91C_AES_CFBS_8_BIT                (0x4 << 16) // (AES) 8-bit.
1504 
#define AT91C_AES_CKEY            (0xF << 20) // (AES) Countermeasure Key
1505 
#define AT91C_AES_CTYPE           (0x1F << 24) // (AES) Countermeasure Type
1506 
#define         AT91C_AES_CTYPE_TYPE1_EN             (0x1 << 24) // (AES) Countermeasure type 1 is enabled.
1507 
#define         AT91C_AES_CTYPE_TYPE2_EN             (0x2 << 24) // (AES) Countermeasure type 2 is enabled.
1508 
#define         AT91C_AES_CTYPE_TYPE3_EN             (0x4 << 24) // (AES) Countermeasure type 3 is enabled.
1509 
#define         AT91C_AES_CTYPE_TYPE4_EN             (0x8 << 24) // (AES) Countermeasure type 4 is enabled.
1510 
#define         AT91C_AES_CTYPE_TYPE5_EN             (0x10 << 24) // (AES) Countermeasure type 5 is enabled.
1511 
// -------- AES_IER : (AES Offset: 0x10) Interrupt Enable Register --------
1512 
#define AT91C_AES_DATRDY          (0x1 <<  0) // (AES) DATRDY
1513 
#define AT91C_AES_ENDRX           (0x1 <<  1) // (AES) PDC Read Buffer End
1514 
#define AT91C_AES_ENDTX           (0x1 <<  2) // (AES) PDC Write Buffer End
1515 
#define AT91C_AES_RXBUFF          (0x1 <<  3) // (AES) PDC Read Buffer Full
1516 
#define AT91C_AES_TXBUFE          (0x1 <<  4) // (AES) PDC Write Buffer Empty
1517 
#define AT91C_AES_URAD            (0x1 <<  8) // (AES) Unspecified Register Access Detection
1518 
// -------- AES_IDR : (AES Offset: 0x14) Interrupt Disable Register --------
1519 
// -------- AES_IMR : (AES Offset: 0x18) Interrupt Mask Register --------
1520 
// -------- AES_ISR : (AES Offset: 0x1c) Interrupt Status Register --------
1521 
#define AT91C_AES_URAT            (0x7 << 12) // (AES) Unspecified Register Access Type Status
1522 
#define         AT91C_AES_URAT_IN_DAT_WRITE_DATPROC (0x0 << 12) // (AES) Input data register written during the data processing in PDC mode.
1523 
#define         AT91C_AES_URAT_OUT_DAT_READ_DATPROC (0x1 << 12) // (AES) Output data register read during the data processing.
1524 
#define         AT91C_AES_URAT_MODEREG_WRITE_DATPROC (0x2 << 12) // (AES) Mode register written during the data processing.
1525 
#define         AT91C_AES_URAT_OUT_DAT_READ_SUBKEY  (0x3 << 12) // (AES) Output data register read during the sub-keys generation.
1526 
#define         AT91C_AES_URAT_MODEREG_WRITE_SUBKEY (0x4 << 12) // (AES) Mode register written during the sub-keys generation.
1527 
#define         AT91C_AES_URAT_WO_REG_READ          (0x5 << 12) // (AES) Write-only register read access.
1528 
 
1529 
// *****************************************************************************
1530 
//              SOFTWARE API DEFINITION  FOR Triple Data Encryption Standard
1531 
// *****************************************************************************
1532 
// *** Register offset in AT91S_TDES structure ***
1533 
#define TDES_CR         ( 0) // Control Register
1534 
#define TDES_MR         ( 4) // Mode Register
1535 
#define TDES_IER        (16) // Interrupt Enable Register
1536 
#define TDES_IDR        (20) // Interrupt Disable Register
1537 
#define TDES_IMR        (24) // Interrupt Mask Register
1538 
#define TDES_ISR        (28) // Interrupt Status Register
1539 
#define TDES_KEY1WxR    (32) // Key 1 Word x Register
1540 
#define TDES_KEY2WxR    (40) // Key 2 Word x Register
1541 
#define TDES_KEY3WxR    (48) // Key 3 Word x Register
1542 
#define TDES_IDATAxR    (64) // Input Data x Register
1543 
#define TDES_ODATAxR    (80) // Output Data x Register
1544 
#define TDES_IVxR       (96) // Initialization Vector x Register
1545 
#define TDES_VR         (252) // TDES Version Register
1546 
#define TDES_RPR        (256) // Receive Pointer Register
1547 
#define TDES_RCR        (260) // Receive Counter Register
1548 
#define TDES_TPR        (264) // Transmit Pointer Register
1549 
#define TDES_TCR        (268) // Transmit Counter Register
1550 
#define TDES_RNPR       (272) // Receive Next Pointer Register
1551 
#define TDES_RNCR       (276) // Receive Next Counter Register
1552 
#define TDES_TNPR       (280) // Transmit Next Pointer Register
1553 
#define TDES_TNCR       (284) // Transmit Next Counter Register
1554 
#define TDES_PTCR       (288) // PDC Transfer Control Register
1555 
#define TDES_PTSR       (292) // PDC Transfer Status Register
1556 
// -------- TDES_CR : (TDES Offset: 0x0) Control Register --------
1557 
#define AT91C_TDES_START          (0x1 <<  0) // (TDES) Starts Processing
1558 
#define AT91C_TDES_SWRST          (0x1 <<  8) // (TDES) Software Reset
1559 
// -------- TDES_MR : (TDES Offset: 0x4) Mode Register --------
1560 
#define AT91C_TDES_CIPHER         (0x1 <<  0) // (TDES) Processing Mode
1561 
#define AT91C_TDES_TDESMOD        (0x1 <<  1) // (TDES) Single or Triple DES Mode
1562 
#define AT91C_TDES_KEYMOD         (0x1 <<  4) // (TDES) Key Mode
1563 
#define AT91C_TDES_SMOD           (0x3 <<  8) // (TDES) Start Mode
1564 
#define         AT91C_TDES_SMOD_MANUAL               (0x0 <<  8) // (TDES) Manual Mode: The START bit in register TDES_CR must be set to begin encryption or decryption.
1565 
#define         AT91C_TDES_SMOD_AUTO                 (0x1 <<  8) // (TDES) Auto Mode: no action in TDES_CR is necessary (cf datasheet).
1566 
#define         AT91C_TDES_SMOD_PDC                  (0x2 <<  8) // (TDES) PDC Mode (cf datasheet).
1567 
#define AT91C_TDES_OPMOD          (0x3 << 12) // (TDES) Operation Mode
1568 
#define         AT91C_TDES_OPMOD_ECB                  (0x0 << 12) // (TDES) ECB Electronic CodeBook mode.
1569 
#define         AT91C_TDES_OPMOD_CBC                  (0x1 << 12) // (TDES) CBC Cipher Block Chaining mode.
1570 
#define         AT91C_TDES_OPMOD_OFB                  (0x2 << 12) // (TDES) OFB Output Feedback mode.
1571 
#define         AT91C_TDES_OPMOD_CFB                  (0x3 << 12) // (TDES) CFB Cipher Feedback mode.
1572 
#define AT91C_TDES_LOD            (0x1 << 15) // (TDES) Last Output Data Mode
1573 
#define AT91C_TDES_CFBS           (0x3 << 16) // (TDES) Cipher Feedback Data Size
1574 
#define         AT91C_TDES_CFBS_64_BIT               (0x0 << 16) // (TDES) 64-bit.
1575 
#define         AT91C_TDES_CFBS_32_BIT               (0x1 << 16) // (TDES) 32-bit.
1576 
#define         AT91C_TDES_CFBS_16_BIT               (0x2 << 16) // (TDES) 16-bit.
1577 
#define         AT91C_TDES_CFBS_8_BIT                (0x3 << 16) // (TDES) 8-bit.
1578 
// -------- TDES_IER : (TDES Offset: 0x10) Interrupt Enable Register --------
1579 
#define AT91C_TDES_DATRDY         (0x1 <<  0) // (TDES) DATRDY
1580 
#define AT91C_TDES_ENDRX          (0x1 <<  1) // (TDES) PDC Read Buffer End
1581 
#define AT91C_TDES_ENDTX          (0x1 <<  2) // (TDES) PDC Write Buffer End
1582 
#define AT91C_TDES_RXBUFF         (0x1 <<  3) // (TDES) PDC Read Buffer Full
1583 
#define AT91C_TDES_TXBUFE         (0x1 <<  4) // (TDES) PDC Write Buffer Empty
1584 
#define AT91C_TDES_URAD           (0x1 <<  8) // (TDES) Unspecified Register Access Detection
1585 
// -------- TDES_IDR : (TDES Offset: 0x14) Interrupt Disable Register --------
1586 
// -------- TDES_IMR : (TDES Offset: 0x18) Interrupt Mask Register --------
1587 
// -------- TDES_ISR : (TDES Offset: 0x1c) Interrupt Status Register --------
1588 
#define AT91C_TDES_URAT           (0x3 << 12) // (TDES) Unspecified Register Access Type Status
1589 
#define         AT91C_TDES_URAT_IN_DAT_WRITE_DATPROC (0x0 << 12) // (TDES) Input data register written during the data processing in PDC mode.
1590 
#define         AT91C_TDES_URAT_OUT_DAT_READ_DATPROC (0x1 << 12) // (TDES) Output data register read during the data processing.
1591 
#define         AT91C_TDES_URAT_MODEREG_WRITE_DATPROC (0x2 << 12) // (TDES) Mode register written during the data processing.
1592 
#define         AT91C_TDES_URAT_WO_REG_READ          (0x3 << 12) // (TDES) Write-only register read access.
1593 
 
1594 
// *****************************************************************************
1595 
//               REGISTER ADDRESS DEFINITION FOR AT91SAM7X128
1596 
// *****************************************************************************
1597 
// ========== Register definition for SYS peripheral ==========
1598 
// ========== Register definition for AIC peripheral ==========
1599 
#define AT91C_AIC_IVR             (0xFFFFF100) // (AIC) IRQ Vector Register
1600 
#define AT91C_AIC_SMR             (0xFFFFF000) // (AIC) Source Mode Register
1601 
#define AT91C_AIC_FVR             (0xFFFFF104) // (AIC) FIQ Vector Register
1602 
#define AT91C_AIC_DCR             (0xFFFFF138) // (AIC) Debug Control Register (Protect)
1603 
#define AT91C_AIC_EOICR           (0xFFFFF130) // (AIC) End of Interrupt Command Register
1604 
#define AT91C_AIC_SVR             (0xFFFFF080) // (AIC) Source Vector Register
1605 
#define AT91C_AIC_FFSR            (0xFFFFF148) // (AIC) Fast Forcing Status Register
1606 
#define AT91C_AIC_ICCR            (0xFFFFF128) // (AIC) Interrupt Clear Command Register
1607 
#define AT91C_AIC_ISR             (0xFFFFF108) // (AIC) Interrupt Status Register
1608 
#define AT91C_AIC_IMR             (0xFFFFF110) // (AIC) Interrupt Mask Register
1609 
#define AT91C_AIC_IPR             (0xFFFFF10C) // (AIC) Interrupt Pending Register
1610 
#define AT91C_AIC_FFER            (0xFFFFF140) // (AIC) Fast Forcing Enable Register
1611 
#define AT91C_AIC_IECR            (0xFFFFF120) // (AIC) Interrupt Enable Command Register
1612 
#define AT91C_AIC_ISCR            (0xFFFFF12C) // (AIC) Interrupt Set Command Register
1613 
#define AT91C_AIC_FFDR            (0xFFFFF144) // (AIC) Fast Forcing Disable Register
1614 
#define AT91C_AIC_CISR            (0xFFFFF114) // (AIC) Core Interrupt Status Register
1615 
#define AT91C_AIC_IDCR            (0xFFFFF124) // (AIC) Interrupt Disable Command Register
1616 
#define AT91C_AIC_SPU             (0xFFFFF134) // (AIC) Spurious Vector Register
1617 
// ========== Register definition for PDC_DBGU peripheral ==========
1618 
#define AT91C_DBGU_TCR            (0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register
1619 
#define AT91C_DBGU_RNPR           (0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register
1620 
#define AT91C_DBGU_TNPR           (0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register
1621 
#define AT91C_DBGU_TPR            (0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register
1622 
#define AT91C_DBGU_RPR            (0xFFFFF300) // (PDC_DBGU) Receive Pointer Register
1623 
#define AT91C_DBGU_RCR            (0xFFFFF304) // (PDC_DBGU) Receive Counter Register
1624 
#define AT91C_DBGU_RNCR           (0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register
1625 
#define AT91C_DBGU_PTCR           (0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register
1626 
#define AT91C_DBGU_PTSR           (0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register
1627 
#define AT91C_DBGU_TNCR           (0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register
1628 
// ========== Register definition for DBGU peripheral ==========
1629 
#define AT91C_DBGU_EXID           (0xFFFFF244) // (DBGU) Chip ID Extension Register
1630 
#define AT91C_DBGU_BRGR           (0xFFFFF220) // (DBGU) Baud Rate Generator Register
1631 
#define AT91C_DBGU_IDR            (0xFFFFF20C) // (DBGU) Interrupt Disable Register
1632 
#define AT91C_DBGU_CSR            (0xFFFFF214) // (DBGU) Channel Status Register
1633 
#define AT91C_DBGU_CIDR           (0xFFFFF240) // (DBGU) Chip ID Register
1634 
#define AT91C_DBGU_MR             (0xFFFFF204) // (DBGU) Mode Register
1635 
#define AT91C_DBGU_IMR            (0xFFFFF210) // (DBGU) Interrupt Mask Register
1636 
#define AT91C_DBGU_CR             (0xFFFFF200) // (DBGU) Control Register
1637 
#define AT91C_DBGU_FNTR           (0xFFFFF248) // (DBGU) Force NTRST Register
1638 
#define AT91C_DBGU_THR            (0xFFFFF21C) // (DBGU) Transmitter Holding Register
1639 
#define AT91C_DBGU_RHR            (0xFFFFF218) // (DBGU) Receiver Holding Register
1640 
#define AT91C_DBGU_IER            (0xFFFFF208) // (DBGU) Interrupt Enable Register
1641 
// ========== Register definition for PIOA peripheral ==========
1642 
#define AT91C_PIOA_ODR            (0xFFFFF414) // (PIOA) Output Disable Registerr
1643 
#define AT91C_PIOA_SODR           (0xFFFFF430) // (PIOA) Set Output Data Register
1644 
#define AT91C_PIOA_ISR            (0xFFFFF44C) // (PIOA) Interrupt Status Register
1645 
#define AT91C_PIOA_ABSR           (0xFFFFF478) // (PIOA) AB Select Status Register
1646 
#define AT91C_PIOA_IER            (0xFFFFF440) // (PIOA) Interrupt Enable Register
1647 
#define AT91C_PIOA_PPUDR          (0xFFFFF460) // (PIOA) Pull-up Disable Register
1648 
#define AT91C_PIOA_IMR            (0xFFFFF448) // (PIOA) Interrupt Mask Register
1649 
#define AT91C_PIOA_PER            (0xFFFFF400) // (PIOA) PIO Enable Register
1650 
#define AT91C_PIOA_IFDR           (0xFFFFF424) // (PIOA) Input Filter Disable Register
1651 
#define AT91C_PIOA_OWDR           (0xFFFFF4A4) // (PIOA) Output Write Disable Register
1652 
#define AT91C_PIOA_MDSR           (0xFFFFF458) // (PIOA) Multi-driver Status Register
1653 
#define AT91C_PIOA_IDR            (0xFFFFF444) // (PIOA) Interrupt Disable Register
1654 
#define AT91C_PIOA_ODSR           (0xFFFFF438) // (PIOA) Output Data Status Register
1655 
#define AT91C_PIOA_PPUSR          (0xFFFFF468) // (PIOA) Pull-up Status Register
1656 
#define AT91C_PIOA_OWSR           (0xFFFFF4A8) // (PIOA) Output Write Status Register
1657 
#define AT91C_PIOA_BSR            (0xFFFFF474) // (PIOA) Select B Register
1658 
#define AT91C_PIOA_OWER           (0xFFFFF4A0) // (PIOA) Output Write Enable Register
1659 
#define AT91C_PIOA_IFER           (0xFFFFF420) // (PIOA) Input Filter Enable Register
1660 
#define AT91C_PIOA_PDSR           (0xFFFFF43C) // (PIOA) Pin Data Status Register
1661 
#define AT91C_PIOA_PPUER          (0xFFFFF464) // (PIOA) Pull-up Enable Register
1662 
#define AT91C_PIOA_OSR            (0xFFFFF418) // (PIOA) Output Status Register
1663 
#define AT91C_PIOA_ASR            (0xFFFFF470) // (PIOA) Select A Register
1664 
#define AT91C_PIOA_MDDR           (0xFFFFF454) // (PIOA) Multi-driver Disable Register
1665 
#define AT91C_PIOA_CODR           (0xFFFFF434) // (PIOA) Clear Output Data Register
1666 
#define AT91C_PIOA_MDER           (0xFFFFF450) // (PIOA) Multi-driver Enable Register
1667 
#define AT91C_PIOA_PDR            (0xFFFFF404) // (PIOA) PIO Disable Register
1668 
#define AT91C_PIOA_IFSR           (0xFFFFF428) // (PIOA) Input Filter Status Register
1669 
#define AT91C_PIOA_OER            (0xFFFFF410) // (PIOA) Output Enable Register
1670 
#define AT91C_PIOA_PSR            (0xFFFFF408) // (PIOA) PIO Status Register
1671 
// ========== Register definition for PIOB peripheral ==========
1672 
#define AT91C_PIOB_OWDR           (0xFFFFF6A4) // (PIOB) Output Write Disable Register
1673 
#define AT91C_PIOB_MDER           (0xFFFFF650) // (PIOB) Multi-driver Enable Register
1674 
#define AT91C_PIOB_PPUSR          (0xFFFFF668) // (PIOB) Pull-up Status Register
1675 
#define AT91C_PIOB_IMR            (0xFFFFF648) // (PIOB) Interrupt Mask Register
1676 
#define AT91C_PIOB_ASR            (0xFFFFF670) // (PIOB) Select A Register
1677 
#define AT91C_PIOB_PPUDR          (0xFFFFF660) // (PIOB) Pull-up Disable Register
1678 
#define AT91C_PIOB_PSR            (0xFFFFF608) // (PIOB) PIO Status Register
1679 
#define AT91C_PIOB_IER            (0xFFFFF640) // (PIOB) Interrupt Enable Register
1680 
#define AT91C_PIOB_CODR           (0xFFFFF634) // (PIOB) Clear Output Data Register
1681 
#define AT91C_PIOB_OWER           (0xFFFFF6A0) // (PIOB) Output Write Enable Register
1682 
#define AT91C_PIOB_ABSR           (0xFFFFF678) // (PIOB) AB Select Status Register
1683 
#define AT91C_PIOB_IFDR           (0xFFFFF624) // (PIOB) Input Filter Disable Register
1684 
#define AT91C_PIOB_PDSR           (0xFFFFF63C) // (PIOB) Pin Data Status Register
1685 
#define AT91C_PIOB_IDR            (0xFFFFF644) // (PIOB) Interrupt Disable Register
1686 
#define AT91C_PIOB_OWSR           (0xFFFFF6A8) // (PIOB) Output Write Status Register
1687 
#define AT91C_PIOB_PDR            (0xFFFFF604) // (PIOB) PIO Disable Register
1688 
#define AT91C_PIOB_ODR            (0xFFFFF614) // (PIOB) Output Disable Registerr
1689 
#define AT91C_PIOB_IFSR           (0xFFFFF628) // (PIOB) Input Filter Status Register
1690 
#define AT91C_PIOB_PPUER          (0xFFFFF664) // (PIOB) Pull-up Enable Register
1691 
#define AT91C_PIOB_SODR           (0xFFFFF630) // (PIOB) Set Output Data Register
1692 
#define AT91C_PIOB_ISR            (0xFFFFF64C) // (PIOB) Interrupt Status Register
1693 
#define AT91C_PIOB_ODSR           (0xFFFFF638) // (PIOB) Output Data Status Register
1694 
#define AT91C_PIOB_OSR            (0xFFFFF618) // (PIOB) Output Status Register
1695 
#define AT91C_PIOB_MDSR           (0xFFFFF658) // (PIOB) Multi-driver Status Register
1696 
#define AT91C_PIOB_IFER           (0xFFFFF620) // (PIOB) Input Filter Enable Register
1697 
#define AT91C_PIOB_BSR            (0xFFFFF674) // (PIOB) Select B Register
1698 
#define AT91C_PIOB_MDDR           (0xFFFFF654) // (PIOB) Multi-driver Disable Register
1699 
#define AT91C_PIOB_OER            (0xFFFFF610) // (PIOB) Output Enable Register
1700 
#define AT91C_PIOB_PER            (0xFFFFF600) // (PIOB) PIO Enable Register
1701 
// ========== Register definition for CKGR peripheral ==========
1702 
#define AT91C_CKGR_MOR            (0xFFFFFC20) // (CKGR) Main Oscillator Register
1703 
#define AT91C_CKGR_PLLR           (0xFFFFFC2C) // (CKGR) PLL Register
1704 
#define AT91C_CKGR_MCFR           (0xFFFFFC24) // (CKGR) Main Clock  Frequency Register
1705 
// ========== Register definition for PMC peripheral ==========
1706 
#define AT91C_PMC_IDR             (0xFFFFFC64) // (PMC) Interrupt Disable Register
1707 
#define AT91C_PMC_MOR             (0xFFFFFC20) // (PMC) Main Oscillator Register
1708 
#define AT91C_PMC_PLLR            (0xFFFFFC2C) // (PMC) PLL Register
1709 
#define AT91C_PMC_PCER            (0xFFFFFC10) // (PMC) Peripheral Clock Enable Register
1710 
#define AT91C_PMC_PCKR            (0xFFFFFC40) // (PMC) Programmable Clock Register
1711 
#define AT91C_PMC_MCKR            (0xFFFFFC30) // (PMC) Master Clock Register
1712 
#define AT91C_PMC_SCDR            (0xFFFFFC04) // (PMC) System Clock Disable Register
1713 
#define AT91C_PMC_PCDR            (0xFFFFFC14) // (PMC) Peripheral Clock Disable Register
1714 
#define AT91C_PMC_SCSR            (0xFFFFFC08) // (PMC) System Clock Status Register
1715 
#define AT91C_PMC_PCSR            (0xFFFFFC18) // (PMC) Peripheral Clock Status Register
1716 
#define AT91C_PMC_MCFR            (0xFFFFFC24) // (PMC) Main Clock  Frequency Register
1717 
#define AT91C_PMC_SCER            (0xFFFFFC00) // (PMC) System Clock Enable Register
1718 
#define AT91C_PMC_IMR             (0xFFFFFC6C) // (PMC) Interrupt Mask Register
1719 
#define AT91C_PMC_IER             (0xFFFFFC60) // (PMC) Interrupt Enable Register
1720 
#define AT91C_PMC_SR              (0xFFFFFC68) // (PMC) Status Register
1721 
// ========== Register definition for RSTC peripheral ==========
1722 
#define AT91C_RSTC_RCR            (0xFFFFFD00) // (RSTC) Reset Control Register
1723 
#define AT91C_RSTC_RMR            (0xFFFFFD08) // (RSTC) Reset Mode Register
1724 
#define AT91C_RSTC_RSR            (0xFFFFFD04) // (RSTC) Reset Status Register
1725 
// ========== Register definition for RTTC peripheral ==========
1726 
#define AT91C_RTTC_RTSR           (0xFFFFFD2C) // (RTTC) Real-time Status Register
1727 
#define AT91C_RTTC_RTMR           (0xFFFFFD20) // (RTTC) Real-time Mode Register
1728 
#define AT91C_RTTC_RTVR           (0xFFFFFD28) // (RTTC) Real-time Value Register
1729 
#define AT91C_RTTC_RTAR           (0xFFFFFD24) // (RTTC) Real-time Alarm Register
1730 
// ========== Register definition for PITC peripheral ==========
1731 
#define AT91C_PITC_PIVR           (0xFFFFFD38) // (PITC) Period Interval Value Register
1732 
#define AT91C_PITC_PISR           (0xFFFFFD34) // (PITC) Period Interval Status Register
1733 
#define AT91C_PITC_PIIR           (0xFFFFFD3C) // (PITC) Period Interval Image Register
1734 
#define AT91C_PITC_PIMR           (0xFFFFFD30) // (PITC) Period Interval Mode Register
1735 
// ========== Register definition for WDTC peripheral ==========
1736 
#define AT91C_WDTC_WDCR           (0xFFFFFD40) // (WDTC) Watchdog Control Register
1737 
#define AT91C_WDTC_WDSR           (0xFFFFFD48) // (WDTC) Watchdog Status Register
1738 
#define AT91C_WDTC_WDMR           (0xFFFFFD44) // (WDTC) Watchdog Mode Register
1739 
// ========== Register definition for VREG peripheral ==========
1740 
#define AT91C_VREG_MR             (0xFFFFFD60) // (VREG) Voltage Regulator Mode Register
1741 
// ========== Register definition for MC peripheral ==========
1742 
#define AT91C_MC_ASR              (0xFFFFFF04) // (MC) MC Abort Status Register
1743 
#define AT91C_MC_RCR              (0xFFFFFF00) // (MC) MC Remap Control Register
1744 
#define AT91C_MC_FCR              (0xFFFFFF64) // (MC) MC Flash Command Register
1745 
#define AT91C_MC_AASR             (0xFFFFFF08) // (MC) MC Abort Address Status Register
1746 
#define AT91C_MC_FSR              (0xFFFFFF68) // (MC) MC Flash Status Register
1747 
#define AT91C_MC_FMR              (0xFFFFFF60) // (MC) MC Flash Mode Register
1748 
// ========== Register definition for PDC_SPI1 peripheral ==========
1749 
#define AT91C_SPI1_PTCR           (0xFFFE4120) // (PDC_SPI1) PDC Transfer Control Register
1750 
#define AT91C_SPI1_RPR            (0xFFFE4100) // (PDC_SPI1) Receive Pointer Register
1751 
#define AT91C_SPI1_TNCR           (0xFFFE411C) // (PDC_SPI1) Transmit Next Counter Register
1752 
#define AT91C_SPI1_TPR            (0xFFFE4108) // (PDC_SPI1) Transmit Pointer Register
1753 
#define AT91C_SPI1_TNPR           (0xFFFE4118) // (PDC_SPI1) Transmit Next Pointer Register
1754 
#define AT91C_SPI1_TCR            (0xFFFE410C) // (PDC_SPI1) Transmit Counter Register
1755 
#define AT91C_SPI1_RCR            (0xFFFE4104) // (PDC_SPI1) Receive Counter Register
1756 
#define AT91C_SPI1_RNPR           (0xFFFE4110) // (PDC_SPI1) Receive Next Pointer Register
1757 
#define AT91C_SPI1_RNCR           (0xFFFE4114) // (PDC_SPI1) Receive Next Counter Register
1758 
#define AT91C_SPI1_PTSR           (0xFFFE4124) // (PDC_SPI1) PDC Transfer Status Register
1759 
// ========== Register definition for SPI1 peripheral ==========
1760 
#define AT91C_SPI1_IMR            (0xFFFE401C) // (SPI1) Interrupt Mask Register
1761 
#define AT91C_SPI1_IER            (0xFFFE4014) // (SPI1) Interrupt Enable Register
1762 
#define AT91C_SPI1_MR             (0xFFFE4004) // (SPI1) Mode Register
1763 
#define AT91C_SPI1_RDR            (0xFFFE4008) // (SPI1) Receive Data Register
1764 
#define AT91C_SPI1_IDR            (0xFFFE4018) // (SPI1) Interrupt Disable Register
1765 
#define AT91C_SPI1_SR             (0xFFFE4010) // (SPI1) Status Register
1766 
#define AT91C_SPI1_TDR            (0xFFFE400C) // (SPI1) Transmit Data Register
1767 
#define AT91C_SPI1_CR             (0xFFFE4000) // (SPI1) Control Register
1768 
#define AT91C_SPI1_CSR            (0xFFFE4030) // (SPI1) Chip Select Register
1769 
// ========== Register definition for PDC_SPI0 peripheral ==========
1770 
#define AT91C_SPI0_PTCR           (0xFFFE0120) // (PDC_SPI0) PDC Transfer Control Register
1771 
#define AT91C_SPI0_TPR            (0xFFFE0108) // (PDC_SPI0) Transmit Pointer Register
1772 
#define AT91C_SPI0_TCR            (0xFFFE010C) // (PDC_SPI0) Transmit Counter Register
1773 
#define AT91C_SPI0_RCR            (0xFFFE0104) // (PDC_SPI0) Receive Counter Register
1774 
#define AT91C_SPI0_PTSR           (0xFFFE0124) // (PDC_SPI0) PDC Transfer Status Register
1775 
#define AT91C_SPI0_RNPR           (0xFFFE0110) // (PDC_SPI0) Receive Next Pointer Register
1776 
#define AT91C_SPI0_RPR            (0xFFFE0100) // (PDC_SPI0) Receive Pointer Register
1777 
#define AT91C_SPI0_TNCR           (0xFFFE011C) // (PDC_SPI0) Transmit Next Counter Register
1778 
#define AT91C_SPI0_RNCR           (0xFFFE0114) // (PDC_SPI0) Receive Next Counter Register
1779 
#define AT91C_SPI0_TNPR           (0xFFFE0118) // (PDC_SPI0) Transmit Next Pointer Register
1780 
// ========== Register definition for SPI0 peripheral ==========
1781 
#define AT91C_SPI0_IER            (0xFFFE0014) // (SPI0) Interrupt Enable Register
1782 
#define AT91C_SPI0_SR             (0xFFFE0010) // (SPI0) Status Register
1783 
#define AT91C_SPI0_IDR            (0xFFFE0018) // (SPI0) Interrupt Disable Register
1784 
#define AT91C_SPI0_CR             (0xFFFE0000) // (SPI0) Control Register
1785 
#define AT91C_SPI0_MR             (0xFFFE0004) // (SPI0) Mode Register
1786 
#define AT91C_SPI0_IMR            (0xFFFE001C) // (SPI0) Interrupt Mask Register
1787 
#define AT91C_SPI0_TDR            (0xFFFE000C) // (SPI0) Transmit Data Register
1788 
#define AT91C_SPI0_RDR            (0xFFFE0008) // (SPI0) Receive Data Register
1789 
#define AT91C_SPI0_CSR            (0xFFFE0030) // (SPI0) Chip Select Register
1790 
// ========== Register definition for PDC_US1 peripheral ==========
1791 
#define AT91C_US1_RNCR            (0xFFFC4114) // (PDC_US1) Receive Next Counter Register
1792 
#define AT91C_US1_PTCR            (0xFFFC4120) // (PDC_US1) PDC Transfer Control Register
1793 
#define AT91C_US1_TCR             (0xFFFC410C) // (PDC_US1) Transmit Counter Register
1794 
#define AT91C_US1_PTSR            (0xFFFC4124) // (PDC_US1) PDC Transfer Status Register
1795 
#define AT91C_US1_TNPR            (0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register
1796 
#define AT91C_US1_RCR             (0xFFFC4104) // (PDC_US1) Receive Counter Register
1797 
#define AT91C_US1_RNPR            (0xFFFC4110) // (PDC_US1) Receive Next Pointer Register
1798 
#define AT91C_US1_RPR             (0xFFFC4100) // (PDC_US1) Receive Pointer Register
1799 
#define AT91C_US1_TNCR            (0xFFFC411C) // (PDC_US1) Transmit Next Counter Register
1800 
#define AT91C_US1_TPR             (0xFFFC4108) // (PDC_US1) Transmit Pointer Register
1801 
// ========== Register definition for US1 peripheral ==========
1802 
#define AT91C_US1_IF              (0xFFFC404C) // (US1) IRDA_FILTER Register
1803 
#define AT91C_US1_NER             (0xFFFC4044) // (US1) Nb Errors Register
1804 
#define AT91C_US1_RTOR            (0xFFFC4024) // (US1) Receiver Time-out Register
1805 
#define AT91C_US1_CSR             (0xFFFC4014) // (US1) Channel Status Register
1806 
#define AT91C_US1_IDR             (0xFFFC400C) // (US1) Interrupt Disable Register
1807 
#define AT91C_US1_IER             (0xFFFC4008) // (US1) Interrupt Enable Register
1808 
#define AT91C_US1_THR             (0xFFFC401C) // (US1) Transmitter Holding Register
1809 
#define AT91C_US1_TTGR            (0xFFFC4028) // (US1) Transmitter Time-guard Register
1810 
#define AT91C_US1_RHR             (0xFFFC4018) // (US1) Receiver Holding Register
1811 
#define AT91C_US1_BRGR            (0xFFFC4020) // (US1) Baud Rate Generator Register
1812 
#define AT91C_US1_IMR             (0xFFFC4010) // (US1) Interrupt Mask Register
1813 
#define AT91C_US1_FIDI            (0xFFFC4040) // (US1) FI_DI_Ratio Register
1814 
#define AT91C_US1_CR              (0xFFFC4000) // (US1) Control Register
1815 
#define AT91C_US1_MR              (0xFFFC4004) // (US1) Mode Register
1816 
// ========== Register definition for PDC_US0 peripheral ==========
1817 
#define AT91C_US0_TNPR            (0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register
1818 
#define AT91C_US0_RNPR            (0xFFFC0110) // (PDC_US0) Receive Next Pointer Register
1819 
#define AT91C_US0_TCR             (0xFFFC010C) // (PDC_US0) Transmit Counter Register
1820 
#define AT91C_US0_PTCR            (0xFFFC0120) // (PDC_US0) PDC Transfer Control Register
1821 
#define AT91C_US0_PTSR            (0xFFFC0124) // (PDC_US0) PDC Transfer Status Register
1822 
#define AT91C_US0_TNCR            (0xFFFC011C) // (PDC_US0) Transmit Next Counter Register
1823 
#define AT91C_US0_TPR             (0xFFFC0108) // (PDC_US0) Transmit Pointer Register
1824 
#define AT91C_US0_RCR             (0xFFFC0104) // (PDC_US0) Receive Counter Register
1825 
#define AT91C_US0_RPR             (0xFFFC0100) // (PDC_US0) Receive Pointer Register
1826 
#define AT91C_US0_RNCR            (0xFFFC0114) // (PDC_US0) Receive Next Counter Register
1827 
// ========== Register definition for US0 peripheral ==========
1828 
#define AT91C_US0_BRGR            (0xFFFC0020) // (US0) Baud Rate Generator Register
1829 
#define AT91C_US0_NER             (0xFFFC0044) // (US0) Nb Errors Register
1830 
#define AT91C_US0_CR              (0xFFFC0000) // (US0) Control Register
1831 
#define AT91C_US0_IMR             (0xFFFC0010) // (US0) Interrupt Mask Register
1832 
#define AT91C_US0_FIDI            (0xFFFC0040) // (US0) FI_DI_Ratio Register
1833 
#define AT91C_US0_TTGR            (0xFFFC0028) // (US0) Transmitter Time-guard Register
1834 
#define AT91C_US0_MR              (0xFFFC0004) // (US0) Mode Register
1835 
#define AT91C_US0_RTOR            (0xFFFC0024) // (US0) Receiver Time-out Register
1836 
#define AT91C_US0_CSR             (0xFFFC0014) // (US0) Channel Status Register
1837 
#define AT91C_US0_RHR             (0xFFFC0018) // (US0) Receiver Holding Register
1838 
#define AT91C_US0_IDR             (0xFFFC000C) // (US0) Interrupt Disable Register
1839 
#define AT91C_US0_THR             (0xFFFC001C) // (US0) Transmitter Holding Register
1840 
#define AT91C_US0_IF              (0xFFFC004C) // (US0) IRDA_FILTER Register
1841 
#define AT91C_US0_IER             (0xFFFC0008) // (US0) Interrupt Enable Register
1842 
// ========== Register definition for PDC_SSC peripheral ==========
1843 
#define AT91C_SSC_TNCR            (0xFFFD411C) // (PDC_SSC) Transmit Next Counter Register
1844 
#define AT91C_SSC_RPR             (0xFFFD4100) // (PDC_SSC) Receive Pointer Register
1845 
#define AT91C_SSC_RNCR            (0xFFFD4114) // (PDC_SSC) Receive Next Counter Register
1846 
#define AT91C_SSC_TPR             (0xFFFD4108) // (PDC_SSC) Transmit Pointer Register
1847 
#define AT91C_SSC_PTCR            (0xFFFD4120) // (PDC_SSC) PDC Transfer Control Register
1848 
#define AT91C_SSC_TCR             (0xFFFD410C) // (PDC_SSC) Transmit Counter Register
1849 
#define AT91C_SSC_RCR             (0xFFFD4104) // (PDC_SSC) Receive Counter Register
1850 
#define AT91C_SSC_RNPR            (0xFFFD4110) // (PDC_SSC) Receive Next Pointer Register
1851 
#define AT91C_SSC_TNPR            (0xFFFD4118) // (PDC_SSC) Transmit Next Pointer Register
1852 
#define AT91C_SSC_PTSR            (0xFFFD4124) // (PDC_SSC) PDC Transfer Status Register
1853 
// ========== Register definition for SSC peripheral ==========
1854 
#define AT91C_SSC_RHR             (0xFFFD4020) // (SSC) Receive Holding Register
1855 
#define AT91C_SSC_RSHR            (0xFFFD4030) // (SSC) Receive Sync Holding Register
1856 
#define AT91C_SSC_TFMR            (0xFFFD401C) // (SSC) Transmit Frame Mode Register
1857 
#define AT91C_SSC_IDR             (0xFFFD4048) // (SSC) Interrupt Disable Register
1858 
#define AT91C_SSC_THR             (0xFFFD4024) // (SSC) Transmit Holding Register
1859 
#define AT91C_SSC_RCMR            (0xFFFD4010) // (SSC) Receive Clock ModeRegister
1860 
#define AT91C_SSC_IER             (0xFFFD4044) // (SSC) Interrupt Enable Register
1861 
#define AT91C_SSC_TSHR            (0xFFFD4034) // (SSC) Transmit Sync Holding Register
1862 
#define AT91C_SSC_SR              (0xFFFD4040) // (SSC) Status Register
1863 
#define AT91C_SSC_CMR             (0xFFFD4004) // (SSC) Clock Mode Register
1864 
#define AT91C_SSC_TCMR            (0xFFFD4018) // (SSC) Transmit Clock Mode Register
1865 
#define AT91C_SSC_CR              (0xFFFD4000) // (SSC) Control Register
1866 
#define AT91C_SSC_IMR             (0xFFFD404C) // (SSC) Interrupt Mask Register
1867 
#define AT91C_SSC_RFMR            (0xFFFD4014) // (SSC) Receive Frame Mode Register
1868 
// ========== Register definition for TWI peripheral ==========
1869 
#define AT91C_TWI_IER             (0xFFFB8024) // (TWI) Interrupt Enable Register
1870 
#define AT91C_TWI_CR              (0xFFFB8000) // (TWI) Control Register
1871 
#define AT91C_TWI_SR              (0xFFFB8020) // (TWI) Status Register
1872 
#define AT91C_TWI_IMR             (0xFFFB802C) // (TWI) Interrupt Mask Register
1873 
#define AT91C_TWI_THR             (0xFFFB8034) // (TWI) Transmit Holding Register
1874 
#define AT91C_TWI_IDR             (0xFFFB8028) // (TWI) Interrupt Disable Register
1875 
#define AT91C_TWI_IADR            (0xFFFB800C) // (TWI) Internal Address Register
1876 
#define AT91C_TWI_MMR             (0xFFFB8004) // (TWI) Master Mode Register
1877 
#define AT91C_TWI_CWGR            (0xFFFB8010) // (TWI) Clock Waveform Generator Register
1878 
#define AT91C_TWI_RHR             (0xFFFB8030) // (TWI) Receive Holding Register
1879 
// ========== Register definition for PWMC_CH3 peripheral ==========
1880 
#define AT91C_PWMC_CH3_CUPDR      (0xFFFCC270) // (PWMC_CH3) Channel Update Register
1881 
#define AT91C_PWMC_CH3_Reserved   (0xFFFCC274) // (PWMC_CH3) Reserved
1882 
#define AT91C_PWMC_CH3_CPRDR      (0xFFFCC268) // (PWMC_CH3) Channel Period Register
1883 
#define AT91C_PWMC_CH3_CDTYR      (0xFFFCC264) // (PWMC_CH3) Channel Duty Cycle Register
1884 
#define AT91C_PWMC_CH3_CCNTR      (0xFFFCC26C) // (PWMC_CH3) Channel Counter Register
1885 
#define AT91C_PWMC_CH3_CMR        (0xFFFCC260) // (PWMC_CH3) Channel Mode Register
1886 
// ========== Register definition for PWMC_CH2 peripheral ==========
1887 
#define AT91C_PWMC_CH2_Reserved   (0xFFFCC254) // (PWMC_CH2) Reserved
1888 
#define AT91C_PWMC_CH2_CMR        (0xFFFCC240) // (PWMC_CH2) Channel Mode Register
1889 
#define AT91C_PWMC_CH2_CCNTR      (0xFFFCC24C) // (PWMC_CH2) Channel Counter Register
1890 
#define AT91C_PWMC_CH2_CPRDR      (0xFFFCC248) // (PWMC_CH2) Channel Period Register
1891 
#define AT91C_PWMC_CH2_CUPDR      (0xFFFCC250) // (PWMC_CH2) Channel Update Register
1892 
#define AT91C_PWMC_CH2_CDTYR      (0xFFFCC244) // (PWMC_CH2) Channel Duty Cycle Register
1893 
// ========== Register definition for PWMC_CH1 peripheral ==========
1894 
#define AT91C_PWMC_CH1_Reserved   (0xFFFCC234) // (PWMC_CH1) Reserved
1895 
#define AT91C_PWMC_CH1_CUPDR      (0xFFFCC230) // (PWMC_CH1) Channel Update Register
1896 
#define AT91C_PWMC_CH1_CPRDR      (0xFFFCC228) // (PWMC_CH1) Channel Period Register
1897 
#define AT91C_PWMC_CH1_CCNTR      (0xFFFCC22C) // (PWMC_CH1) Channel Counter Register
1898 
#define AT91C_PWMC_CH1_CDTYR      (0xFFFCC224) // (PWMC_CH1) Channel Duty Cycle Register
1899 
#define AT91C_PWMC_CH1_CMR        (0xFFFCC220) // (PWMC_CH1) Channel Mode Register
1900 
// ========== Register definition for PWMC_CH0 peripheral ==========
1901 
#define AT91C_PWMC_CH0_Reserved   (0xFFFCC214) // (PWMC_CH0) Reserved
1902 
#define AT91C_PWMC_CH0_CPRDR      (0xFFFCC208) // (PWMC_CH0) Channel Period Register
1903 
#define AT91C_PWMC_CH0_CDTYR      (0xFFFCC204) // (PWMC_CH0) Channel Duty Cycle Register
1904 
#define AT91C_PWMC_CH0_CMR        (0xFFFCC200) // (PWMC_CH0) Channel Mode Register
1905 
#define AT91C_PWMC_CH0_CUPDR      (0xFFFCC210) // (PWMC_CH0) Channel Update Register
1906 
#define AT91C_PWMC_CH0_CCNTR      (0xFFFCC20C) // (PWMC_CH0) Channel Counter Register
1907 
// ========== Register definition for PWMC peripheral ==========
1908 
#define AT91C_PWMC_IDR            (0xFFFCC014) // (PWMC) PWMC Interrupt Disable Register
1909 
#define AT91C_PWMC_DIS            (0xFFFCC008) // (PWMC) PWMC Disable Register
1910 
#define AT91C_PWMC_IER            (0xFFFCC010) // (PWMC) PWMC Interrupt Enable Register
1911 
#define AT91C_PWMC_VR             (0xFFFCC0FC) // (PWMC) PWMC Version Register
1912 
#define AT91C_PWMC_ISR            (0xFFFCC01C) // (PWMC) PWMC Interrupt Status Register
1913 
#define AT91C_PWMC_SR             (0xFFFCC00C) // (PWMC) PWMC Status Register
1914 
#define AT91C_PWMC_IMR            (0xFFFCC018) // (PWMC) PWMC Interrupt Mask Register
1915 
#define AT91C_PWMC_MR             (0xFFFCC000) // (PWMC) PWMC Mode Register
1916 
#define AT91C_PWMC_ENA            (0xFFFCC004) // (PWMC) PWMC Enable Register
1917 
// ========== Register definition for UDP peripheral ==========
1918 
#define AT91C_UDP_IMR             (0xFFFB0018) // (UDP) Interrupt Mask Register
1919 
#define AT91C_UDP_FADDR           (0xFFFB0008) // (UDP) Function Address Register
1920 
#define AT91C_UDP_NUM             (0xFFFB0000) // (UDP) Frame Number Register
1921 
#define AT91C_UDP_FDR             (0xFFFB0050) // (UDP) Endpoint FIFO Data Register
1922 
#define AT91C_UDP_ISR             (0xFFFB001C) // (UDP) Interrupt Status Register
1923 
#define AT91C_UDP_CSR             (0xFFFB0030) // (UDP) Endpoint Control and Status Register
1924 
#define AT91C_UDP_IDR             (0xFFFB0014) // (UDP) Interrupt Disable Register
1925 
#define AT91C_UDP_ICR             (0xFFFB0020) // (UDP) Interrupt Clear Register
1926 
#define AT91C_UDP_RSTEP           (0xFFFB0028) // (UDP) Reset Endpoint Register
1927 
#define AT91C_UDP_TXVC            (0xFFFB0074) // (UDP) Transceiver Control Register
1928 
#define AT91C_UDP_GLBSTATE        (0xFFFB0004) // (UDP) Global State Register
1929 
#define AT91C_UDP_IER             (0xFFFB0010) // (UDP) Interrupt Enable Register
1930 
// ========== Register definition for TC0 peripheral ==========
1931 
#define AT91C_TC0_SR              (0xFFFA0020) // (TC0) Status Register
1932 
#define AT91C_TC0_RC              (0xFFFA001C) // (TC0) Register C
1933 
#define AT91C_TC0_RB              (0xFFFA0018) // (TC0) Register B
1934 
#define AT91C_TC0_CCR             (0xFFFA0000) // (TC0) Channel Control Register
1935 
#define AT91C_TC0_CMR             (0xFFFA0004) // (TC0) Channel Mode Register (Capture Mode / Waveform Mode)
1936 
#define AT91C_TC0_IER             (0xFFFA0024) // (TC0) Interrupt Enable Register
1937 
#define AT91C_TC0_RA              (0xFFFA0014) // (TC0) Register A
1938 
#define AT91C_TC0_IDR             (0xFFFA0028) // (TC0) Interrupt Disable Register
1939 
#define AT91C_TC0_CV              (0xFFFA0010) // (TC0) Counter Value
1940 
#define AT91C_TC0_IMR             (0xFFFA002C) // (TC0) Interrupt Mask Register
1941 
// ========== Register definition for TC1 peripheral ==========
1942 
#define AT91C_TC1_RB              (0xFFFA0058) // (TC1) Register B
1943 
#define AT91C_TC1_CCR             (0xFFFA0040) // (TC1) Channel Control Register
1944 
#define AT91C_TC1_IER             (0xFFFA0064) // (TC1) Interrupt Enable Register
1945 
#define AT91C_TC1_IDR             (0xFFFA0068) // (TC1) Interrupt Disable Register
1946 
#define AT91C_TC1_SR              (0xFFFA0060) // (TC1) Status Register
1947 
#define AT91C_TC1_CMR             (0xFFFA0044) // (TC1) Channel Mode Register (Capture Mode / Waveform Mode)
1948 
#define AT91C_TC1_RA              (0xFFFA0054) // (TC1) Register A
1949 
#define AT91C_TC1_RC              (0xFFFA005C) // (TC1) Register C
1950 
#define AT91C_TC1_IMR             (0xFFFA006C) // (TC1) Interrupt Mask Register
1951 
#define AT91C_TC1_CV              (0xFFFA0050) // (TC1) Counter Value
1952 
// ========== Register definition for TC2 peripheral ==========
1953 
#define AT91C_TC2_CMR             (0xFFFA0084) // (TC2) Channel Mode Register (Capture Mode / Waveform Mode)
1954 
#define AT91C_TC2_CCR             (0xFFFA0080) // (TC2) Channel Control Register
1955 
#define AT91C_TC2_CV              (0xFFFA0090) // (TC2) Counter Value
1956 
#define AT91C_TC2_RA              (0xFFFA0094) // (TC2) Register A
1957 
#define AT91C_TC2_RB              (0xFFFA0098) // (TC2) Register B
1958 
#define AT91C_TC2_IDR             (0xFFFA00A8) // (TC2) Interrupt Disable Register
1959 
#define AT91C_TC2_IMR             (0xFFFA00AC) // (TC2) Interrupt Mask Register
1960 
#define AT91C_TC2_RC              (0xFFFA009C) // (TC2) Register C
1961 
#define AT91C_TC2_IER             (0xFFFA00A4) // (TC2) Interrupt Enable Register
1962 
#define AT91C_TC2_SR              (0xFFFA00A0) // (TC2) Status Register
1963 
// ========== Register definition for TCB peripheral ==========
1964 
#define AT91C_TCB_BMR             (0xFFFA00C4) // (TCB) TC Block Mode Register
1965 
#define AT91C_TCB_BCR             (0xFFFA00C0) // (TCB) TC Block Control Register
1966 
// ========== Register definition for CAN_MB0 peripheral ==========
1967 
#define AT91C_CAN_MB0_MDL         (0xFFFD0214) // (CAN_MB0) MailBox Data Low Register
1968 
#define AT91C_CAN_MB0_MAM         (0xFFFD0204) // (CAN_MB0) MailBox Acceptance Mask Register
1969 
#define AT91C_CAN_MB0_MCR         (0xFFFD021C) // (CAN_MB0) MailBox Control Register
1970 
#define AT91C_CAN_MB0_MID         (0xFFFD0208) // (CAN_MB0) MailBox ID Register
1971 
#define AT91C_CAN_MB0_MSR         (0xFFFD0210) // (CAN_MB0) MailBox Status Register
1972 
#define AT91C_CAN_MB0_MFID        (0xFFFD020C) // (CAN_MB0) MailBox Family ID Register
1973 
#define AT91C_CAN_MB0_MDH         (0xFFFD0218) // (CAN_MB0) MailBox Data High Register
1974 
#define AT91C_CAN_MB0_MMR         (0xFFFD0200) // (CAN_MB0) MailBox Mode Register
1975 
// ========== Register definition for CAN_MB1 peripheral ==========
1976 
#define AT91C_CAN_MB1_MDL         (0xFFFD0234) // (CAN_MB1) MailBox Data Low Register
1977 
#define AT91C_CAN_MB1_MID         (0xFFFD0228) // (CAN_MB1) MailBox ID Register
1978 
#define AT91C_CAN_MB1_MMR         (0xFFFD0220) // (CAN_MB1) MailBox Mode Register
1979 
#define AT91C_CAN_MB1_MSR         (0xFFFD0230) // (CAN_MB1) MailBox Status Register
1980 
#define AT91C_CAN_MB1_MAM         (0xFFFD0224) // (CAN_MB1) MailBox Acceptance Mask Register
1981 
#define AT91C_CAN_MB1_MDH         (0xFFFD0238) // (CAN_MB1) MailBox Data High Register
1982 
#define AT91C_CAN_MB1_MCR         (0xFFFD023C) // (CAN_MB1) MailBox Control Register
1983 
#define AT91C_CAN_MB1_MFID        (0xFFFD022C) // (CAN_MB1) MailBox Family ID Register
1984 
// ========== Register definition for CAN_MB2 peripheral ==========
1985 
#define AT91C_CAN_MB2_MCR         (0xFFFD025C) // (CAN_MB2) MailBox Control Register
1986 
#define AT91C_CAN_MB2_MDH         (0xFFFD0258) // (CAN_MB2) MailBox Data High Register
1987 
#define AT91C_CAN_MB2_MID         (0xFFFD0248) // (CAN_MB2) MailBox ID Register
1988 
#define AT91C_CAN_MB2_MDL         (0xFFFD0254) // (CAN_MB2) MailBox Data Low Register
1989 
#define AT91C_CAN_MB2_MMR         (0xFFFD0240) // (CAN_MB2) MailBox Mode Register
1990 
#define AT91C_CAN_MB2_MAM         (0xFFFD0244) // (CAN_MB2) MailBox Acceptance Mask Register
1991 
#define AT91C_CAN_MB2_MFID        (0xFFFD024C) // (CAN_MB2) MailBox Family ID Register
1992 
#define AT91C_CAN_MB2_MSR         (0xFFFD0250) // (CAN_MB2) MailBox Status Register
1993 
// ========== Register definition for CAN_MB3 peripheral ==========
1994 
#define AT91C_CAN_MB3_MFID        (0xFFFD026C) // (CAN_MB3) MailBox Family ID Register
1995 
#define AT91C_CAN_MB3_MAM         (0xFFFD0264) // (CAN_MB3) MailBox Acceptance Mask Register
1996 
#define AT91C_CAN_MB3_MID         (0xFFFD0268) // (CAN_MB3) MailBox ID Register
1997 
#define AT91C_CAN_MB3_MCR         (0xFFFD027C) // (CAN_MB3) MailBox Control Register
1998 
#define AT91C_CAN_MB3_MMR         (0xFFFD0260) // (CAN_MB3) MailBox Mode Register
1999 
#define AT91C_CAN_MB3_MSR         (0xFFFD0270) // (CAN_MB3) MailBox Status Register
2000 
#define AT91C_CAN_MB3_MDL         (0xFFFD0274) // (CAN_MB3) MailBox Data Low Register
2001 
#define AT91C_CAN_MB3_MDH         (0xFFFD0278) // (CAN_MB3) MailBox Data High Register
2002 
// ========== Register definition for CAN_MB4 peripheral ==========
2003 
#define AT91C_CAN_MB4_MID         (0xFFFD0288) // (CAN_MB4) MailBox ID Register
2004 
#define AT91C_CAN_MB4_MMR         (0xFFFD0280) // (CAN_MB4) MailBox Mode Register
2005 
#define AT91C_CAN_MB4_MDH         (0xFFFD0298) // (CAN_MB4) MailBox Data High Register
2006 
#define AT91C_CAN_MB4_MFID        (0xFFFD028C) // (CAN_MB4) MailBox Family ID Register
2007 
#define AT91C_CAN_MB4_MSR         (0xFFFD0290) // (CAN_MB4) MailBox Status Register
2008 
#define AT91C_CAN_MB4_MCR         (0xFFFD029C) // (CAN_MB4) MailBox Control Register
2009 
#define AT91C_CAN_MB4_MDL         (0xFFFD0294) // (CAN_MB4) MailBox Data Low Register
2010 
#define AT91C_CAN_MB4_MAM         (0xFFFD0284) // (CAN_MB4) MailBox Acceptance Mask Register
2011 
// ========== Register definition for CAN_MB5 peripheral ==========
2012 
#define AT91C_CAN_MB5_MSR         (0xFFFD02B0) // (CAN_MB5) MailBox Status Register
2013 
#define AT91C_CAN_MB5_MCR         (0xFFFD02BC) // (CAN_MB5) MailBox Control Register
2014 
#define AT91C_CAN_MB5_MFID        (0xFFFD02AC) // (CAN_MB5) MailBox Family ID Register
2015 
#define AT91C_CAN_MB5_MDH         (0xFFFD02B8) // (CAN_MB5) MailBox Data High Register
2016 
#define AT91C_CAN_MB5_MID         (0xFFFD02A8) // (CAN_MB5) MailBox ID Register
2017 
#define AT91C_CAN_MB5_MMR         (0xFFFD02A0) // (CAN_MB5) MailBox Mode Register
2018 
#define AT91C_CAN_MB5_MDL         (0xFFFD02B4) // (CAN_MB5) MailBox Data Low Register
2019 
#define AT91C_CAN_MB5_MAM         (0xFFFD02A4) // (CAN_MB5) MailBox Acceptance Mask Register
2020 
// ========== Register definition for CAN_MB6 peripheral ==========
2021 
#define AT91C_CAN_MB6_MFID        (0xFFFD02CC) // (CAN_MB6) MailBox Family ID Register
2022 
#define AT91C_CAN_MB6_MID         (0xFFFD02C8) // (CAN_MB6) MailBox ID Register
2023 
#define AT91C_CAN_MB6_MAM         (0xFFFD02C4) // (CAN_MB6) MailBox Acceptance Mask Register
2024 
#define AT91C_CAN_MB6_MSR         (0xFFFD02D0) // (CAN_MB6) MailBox Status Register
2025 
#define AT91C_CAN_MB6_MDL         (0xFFFD02D4) // (CAN_MB6) MailBox Data Low Register
2026 
#define AT91C_CAN_MB6_MCR         (0xFFFD02DC) // (CAN_MB6) MailBox Control Register
2027 
#define AT91C_CAN_MB6_MDH         (0xFFFD02D8) // (CAN_MB6) MailBox Data High Register
2028 
#define AT91C_CAN_MB6_MMR         (0xFFFD02C0) // (CAN_MB6) MailBox Mode Register
2029 
// ========== Register definition for CAN_MB7 peripheral ==========
2030 
#define AT91C_CAN_MB7_MCR         (0xFFFD02FC) // (CAN_MB7) MailBox Control Register
2031 
#define AT91C_CAN_MB7_MDH         (0xFFFD02F8) // (CAN_MB7) MailBox Data High Register
2032 
#define AT91C_CAN_MB7_MFID        (0xFFFD02EC) // (CAN_MB7) MailBox Family ID Register
2033 
#define AT91C_CAN_MB7_MDL         (0xFFFD02F4) // (CAN_MB7) MailBox Data Low Register
2034 
#define AT91C_CAN_MB7_MID         (0xFFFD02E8) // (CAN_MB7) MailBox ID Register
2035 
#define AT91C_CAN_MB7_MMR         (0xFFFD02E0) // (CAN_MB7) MailBox Mode Register
2036 
#define AT91C_CAN_MB7_MAM         (0xFFFD02E4) // (CAN_MB7) MailBox Acceptance Mask Register
2037 
#define AT91C_CAN_MB7_MSR         (0xFFFD02F0) // (CAN_MB7) MailBox Status Register
2038 
// ========== Register definition for CAN peripheral ==========
2039 
#define AT91C_CAN_TCR             (0xFFFD0024) // (CAN) Transfer Command Register
2040 
#define AT91C_CAN_IMR             (0xFFFD000C) // (CAN) Interrupt Mask Register
2041 
#define AT91C_CAN_IER             (0xFFFD0004) // (CAN) Interrupt Enable Register
2042 
#define AT91C_CAN_ECR             (0xFFFD0020) // (CAN) Error Counter Register
2043 
#define AT91C_CAN_TIMESTP         (0xFFFD001C) // (CAN) Time Stamp Register
2044 
#define AT91C_CAN_MR              (0xFFFD0000) // (CAN) Mode Register
2045 
#define AT91C_CAN_IDR             (0xFFFD0008) // (CAN) Interrupt Disable Register
2046 
#define AT91C_CAN_ACR             (0xFFFD0028) // (CAN) Abort Command Register
2047 
#define AT91C_CAN_TIM             (0xFFFD0018) // (CAN) Timer Register
2048 
#define AT91C_CAN_SR              (0xFFFD0010) // (CAN) Status Register
2049 
#define AT91C_CAN_BR              (0xFFFD0014) // (CAN) Baudrate Register
2050 
#define AT91C_CAN_VR              (0xFFFD00FC) // (CAN) Version Register
2051 
// ========== Register definition for EMAC peripheral ==========
2052 
#define AT91C_EMAC_ISR            (0xFFFDC024) // (EMAC) Interrupt Status Register
2053 
#define AT91C_EMAC_SA4H           (0xFFFDC0B4) // (EMAC) Specific Address 4 Top, Last 2 bytes
2054 
#define AT91C_EMAC_SA1L           (0xFFFDC098) // (EMAC) Specific Address 1 Bottom, First 4 bytes
2055 
#define AT91C_EMAC_ELE            (0xFFFDC078) // (EMAC) Excessive Length Errors Register
2056 
#define AT91C_EMAC_LCOL           (0xFFFDC05C) // (EMAC) Late Collision Register
2057 
#define AT91C_EMAC_RLE            (0xFFFDC088) // (EMAC) Receive Length Field Mismatch Register
2058 
#define AT91C_EMAC_WOL            (0xFFFDC0C4) // (EMAC) Wake On LAN Register
2059 
#define AT91C_EMAC_DTF            (0xFFFDC058) // (EMAC) Deferred Transmission Frame Register
2060 
#define AT91C_EMAC_TUND           (0xFFFDC064) // (EMAC) Transmit Underrun Error Register
2061 
#define AT91C_EMAC_NCR            (0xFFFDC000) // (EMAC) Network Control Register
2062 
#define AT91C_EMAC_SA4L           (0xFFFDC0B0) // (EMAC) Specific Address 4 Bottom, First 4 bytes
2063 
#define AT91C_EMAC_RSR            (0xFFFDC020) // (EMAC) Receive Status Register
2064 
#define AT91C_EMAC_SA3L           (0xFFFDC0A8) // (EMAC) Specific Address 3 Bottom, First 4 bytes
2065 
#define AT91C_EMAC_TSR            (0xFFFDC014) // (EMAC) Transmit Status Register
2066 
#define AT91C_EMAC_IDR            (0xFFFDC02C) // (EMAC) Interrupt Disable Register
2067 
#define AT91C_EMAC_RSE            (0xFFFDC074) // (EMAC) Receive Symbol Errors Register
2068 
#define AT91C_EMAC_ECOL           (0xFFFDC060) // (EMAC) Excessive Collision Register
2069 
#define AT91C_EMAC_TID            (0xFFFDC0B8) // (EMAC) Type ID Checking Register
2070 
#define AT91C_EMAC_HRB            (0xFFFDC090) // (EMAC) Hash Address Bottom[31:0]
2071 
#define AT91C_EMAC_TBQP           (0xFFFDC01C) // (EMAC) Transmit Buffer Queue Pointer
2072 
#define AT91C_EMAC_USRIO          (0xFFFDC0C0) // (EMAC) USER Input/Output Register
2073 
#define AT91C_EMAC_PTR            (0xFFFDC038) // (EMAC) Pause Time Register
2074 
#define AT91C_EMAC_SA2H           (0xFFFDC0A4) // (EMAC) Specific Address 2 Top, Last 2 bytes
2075 
#define AT91C_EMAC_ROV            (0xFFFDC070) // (EMAC) Receive Overrun Errors Register
2076 
#define AT91C_EMAC_ALE            (0xFFFDC054) // (EMAC) Alignment Error Register
2077 
#define AT91C_EMAC_RJA            (0xFFFDC07C) // (EMAC) Receive Jabbers Register
2078 
#define AT91C_EMAC_RBQP           (0xFFFDC018) // (EMAC) Receive Buffer Queue Pointer
2079 
#define AT91C_EMAC_TPF            (0xFFFDC08C) // (EMAC) Transmitted Pause Frames Register
2080 
#define AT91C_EMAC_NCFGR          (0xFFFDC004) // (EMAC) Network Configuration Register
2081 
#define AT91C_EMAC_HRT            (0xFFFDC094) // (EMAC) Hash Address Top[63:32]
2082 
#define AT91C_EMAC_USF            (0xFFFDC080) // (EMAC) Undersize Frames Register
2083 
#define AT91C_EMAC_FCSE           (0xFFFDC050) // (EMAC) Frame Check Sequence Error Register
2084 
#define AT91C_EMAC_TPQ            (0xFFFDC0BC) // (EMAC) Transmit Pause Quantum Register
2085 
#define AT91C_EMAC_MAN            (0xFFFDC034) // (EMAC) PHY Maintenance Register
2086 
#define AT91C_EMAC_FTO            (0xFFFDC040) // (EMAC) Frames Transmitted OK Register
2087 
#define AT91C_EMAC_REV            (0xFFFDC0FC) // (EMAC) Revision Register
2088 
#define AT91C_EMAC_IMR            (0xFFFDC030) // (EMAC) Interrupt Mask Register
2089 
#define AT91C_EMAC_SCF            (0xFFFDC044) // (EMAC) Single Collision Frame Register
2090 
#define AT91C_EMAC_PFR            (0xFFFDC03C) // (EMAC) Pause Frames received Register
2091 
#define AT91C_EMAC_MCF            (0xFFFDC048) // (EMAC) Multiple Collision Frame Register
2092 
#define AT91C_EMAC_NSR            (0xFFFDC008) // (EMAC) Network Status Register
2093 
#define AT91C_EMAC_SA2L           (0xFFFDC0A0) // (EMAC) Specific Address 2 Bottom, First 4 bytes
2094 
#define AT91C_EMAC_FRO            (0xFFFDC04C) // (EMAC) Frames Received OK Register
2095 
#define AT91C_EMAC_IER            (0xFFFDC028) // (EMAC) Interrupt Enable Register
2096 
#define AT91C_EMAC_SA1H           (0xFFFDC09C) // (EMAC) Specific Address 1 Top, Last 2 bytes
2097 
#define AT91C_EMAC_CSE            (0xFFFDC068) // (EMAC) Carrier Sense Error Register
2098 
#define AT91C_EMAC_SA3H           (0xFFFDC0AC) // (EMAC) Specific Address 3 Top, Last 2 bytes
2099 
#define AT91C_EMAC_RRE            (0xFFFDC06C) // (EMAC) Receive Ressource Error Register
2100 
#define AT91C_EMAC_STE            (0xFFFDC084) // (EMAC) SQE Test Error Register
2101 
// ========== Register definition for PDC_ADC peripheral ==========
2102 
#define AT91C_ADC_PTSR            (0xFFFD8124) // (PDC_ADC) PDC Transfer Status Register
2103 
#define AT91C_ADC_PTCR            (0xFFFD8120) // (PDC_ADC) PDC Transfer Control Register
2104 
#define AT91C_ADC_TNPR            (0xFFFD8118) // (PDC_ADC) Transmit Next Pointer Register
2105 
#define AT91C_ADC_TNCR            (0xFFFD811C) // (PDC_ADC) Transmit Next Counter Register
2106 
#define AT91C_ADC_RNPR            (0xFFFD8110) // (PDC_ADC) Receive Next Pointer Register
2107 
#define AT91C_ADC_RNCR            (0xFFFD8114) // (PDC_ADC) Receive Next Counter Register
2108 
#define AT91C_ADC_RPR             (0xFFFD8100) // (PDC_ADC) Receive Pointer Register
2109 
#define AT91C_ADC_TCR             (0xFFFD810C) // (PDC_ADC) Transmit Counter Register
2110 
#define AT91C_ADC_TPR             (0xFFFD8108) // (PDC_ADC) Transmit Pointer Register
2111 
#define AT91C_ADC_RCR             (0xFFFD8104) // (PDC_ADC) Receive Counter Register
2112 
// ========== Register definition for ADC peripheral ==========
2113 
#define AT91C_ADC_CDR2            (0xFFFD8038) // (ADC) ADC Channel Data Register 2
2114 
#define AT91C_ADC_CDR3            (0xFFFD803C) // (ADC) ADC Channel Data Register 3
2115 
#define AT91C_ADC_CDR0            (0xFFFD8030) // (ADC) ADC Channel Data Register 0
2116 
#define AT91C_ADC_CDR5            (0xFFFD8044) // (ADC) ADC Channel Data Register 5
2117 
#define AT91C_ADC_CHDR            (0xFFFD8014) // (ADC) ADC Channel Disable Register
2118 
#define AT91C_ADC_SR              (0xFFFD801C) // (ADC) ADC Status Register
2119 
#define AT91C_ADC_CDR4            (0xFFFD8040) // (ADC) ADC Channel Data Register 4
2120 
#define AT91C_ADC_CDR1            (0xFFFD8034) // (ADC) ADC Channel Data Register 1
2121 
#define AT91C_ADC_LCDR            (0xFFFD8020) // (ADC) ADC Last Converted Data Register
2122 
#define AT91C_ADC_IDR             (0xFFFD8028) // (ADC) ADC Interrupt Disable Register
2123 
#define AT91C_ADC_CR              (0xFFFD8000) // (ADC) ADC Control Register
2124 
#define AT91C_ADC_CDR7            (0xFFFD804C) // (ADC) ADC Channel Data Register 7
2125 
#define AT91C_ADC_CDR6            (0xFFFD8048) // (ADC) ADC Channel Data Register 6
2126 
#define AT91C_ADC_IER             (0xFFFD8024) // (ADC) ADC Interrupt Enable Register
2127 
#define AT91C_ADC_CHER            (0xFFFD8010) // (ADC) ADC Channel Enable Register
2128 
#define AT91C_ADC_CHSR            (0xFFFD8018) // (ADC) ADC Channel Status Register
2129 
#define AT91C_ADC_MR              (0xFFFD8004) // (ADC) ADC Mode Register
2130 
#define AT91C_ADC_IMR             (0xFFFD802C) // (ADC) ADC Interrupt Mask Register
2131 
// ========== Register definition for PDC_AES peripheral ==========
2132 
#define AT91C_AES_TPR             (0xFFFA4108) // (PDC_AES) Transmit Pointer Register
2133 
#define AT91C_AES_PTCR            (0xFFFA4120) // (PDC_AES) PDC Transfer Control Register
2134 
#define AT91C_AES_RNPR            (0xFFFA4110) // (PDC_AES) Receive Next Pointer Register
2135 
#define AT91C_AES_TNCR            (0xFFFA411C) // (PDC_AES) Transmit Next Counter Register
2136 
#define AT91C_AES_TCR             (0xFFFA410C) // (PDC_AES) Transmit Counter Register
2137 
#define AT91C_AES_RCR             (0xFFFA4104) // (PDC_AES) Receive Counter Register
2138 
#define AT91C_AES_RNCR            (0xFFFA4114) // (PDC_AES) Receive Next Counter Register
2139 
#define AT91C_AES_TNPR            (0xFFFA4118) // (PDC_AES) Transmit Next Pointer Register
2140 
#define AT91C_AES_RPR             (0xFFFA4100) // (PDC_AES) Receive Pointer Register
2141 
#define AT91C_AES_PTSR            (0xFFFA4124) // (PDC_AES) PDC Transfer Status Register
2142 
// ========== Register definition for AES peripheral ==========
2143 
#define AT91C_AES_IVxR            (0xFFFA4060) // (AES) Initialization Vector x Register
2144 
#define AT91C_AES_MR              (0xFFFA4004) // (AES) Mode Register
2145 
#define AT91C_AES_VR              (0xFFFA40FC) // (AES) AES Version Register
2146 
#define AT91C_AES_ODATAxR         (0xFFFA4050) // (AES) Output Data x Register
2147 
#define AT91C_AES_IDATAxR         (0xFFFA4040) // (AES) Input Data x Register
2148 
#define AT91C_AES_CR              (0xFFFA4000) // (AES) Control Register
2149 
#define AT91C_AES_IDR             (0xFFFA4014) // (AES) Interrupt Disable Register
2150 
#define AT91C_AES_IMR             (0xFFFA4018) // (AES) Interrupt Mask Register
2151 
#define AT91C_AES_IER             (0xFFFA4010) // (AES) Interrupt Enable Register
2152 
#define AT91C_AES_KEYWxR          (0xFFFA4020) // (AES) Key Word x Register
2153 
#define AT91C_AES_ISR             (0xFFFA401C) // (AES) Interrupt Status Register
2154 
// ========== Register definition for PDC_TDES peripheral ==========
2155 
#define AT91C_TDES_RNCR           (0xFFFA8114) // (PDC_TDES) Receive Next Counter Register
2156 
#define AT91C_TDES_TCR            (0xFFFA810C) // (PDC_TDES) Transmit Counter Register
2157 
#define AT91C_TDES_RCR            (0xFFFA8104) // (PDC_TDES) Receive Counter Register
2158 
#define AT91C_TDES_TNPR           (0xFFFA8118) // (PDC_TDES) Transmit Next Pointer Register
2159 
#define AT91C_TDES_RNPR           (0xFFFA8110) // (PDC_TDES) Receive Next Pointer Register
2160 
#define AT91C_TDES_RPR            (0xFFFA8100) // (PDC_TDES) Receive Pointer Register
2161 
#define AT91C_TDES_TNCR           (0xFFFA811C) // (PDC_TDES) Transmit Next Counter Register
2162 
#define AT91C_TDES_TPR            (0xFFFA8108) // (PDC_TDES) Transmit Pointer Register
2163 
#define AT91C_TDES_PTSR           (0xFFFA8124) // (PDC_TDES) PDC Transfer Status Register
2164 
#define AT91C_TDES_PTCR           (0xFFFA8120) // (PDC_TDES) PDC Transfer Control Register
2165 
// ========== Register definition for TDES peripheral ==========
2166 
#define AT91C_TDES_KEY2WxR        (0xFFFA8028) // (TDES) Key 2 Word x Register
2167 
#define AT91C_TDES_KEY3WxR        (0xFFFA8030) // (TDES) Key 3 Word x Register
2168 
#define AT91C_TDES_IDR            (0xFFFA8014) // (TDES) Interrupt Disable Register
2169 
#define AT91C_TDES_VR             (0xFFFA80FC) // (TDES) TDES Version Register
2170 
#define AT91C_TDES_IVxR           (0xFFFA8060) // (TDES) Initialization Vector x Register
2171 
#define AT91C_TDES_ODATAxR        (0xFFFA8050) // (TDES) Output Data x Register
2172 
#define AT91C_TDES_IMR            (0xFFFA8018) // (TDES) Interrupt Mask Register
2173 
#define AT91C_TDES_MR             (0xFFFA8004) // (TDES) Mode Register
2174 
#define AT91C_TDES_CR             (0xFFFA8000) // (TDES) Control Register
2175 
#define AT91C_TDES_IER            (0xFFFA8010) // (TDES) Interrupt Enable Register
2176 
#define AT91C_TDES_ISR            (0xFFFA801C) // (TDES) Interrupt Status Register
2177 
#define AT91C_TDES_IDATAxR        (0xFFFA8040) // (TDES) Input Data x Register
2178 
#define AT91C_TDES_KEY1WxR        (0xFFFA8020) // (TDES) Key 1 Word x Register
2179 
 
2180 
// *****************************************************************************
2181 
//               PIO DEFINITIONS FOR AT91SAM7X128
2182 
// *****************************************************************************
2183 
#define AT91C_PIO_PA0             (1 <<  0) // Pin Controlled by PA0
2184 
#define AT91C_PA0_RXD0            (AT91C_PIO_PA0) //  USART 0 Receive Data
2185 
#define AT91C_PIO_PA1             (1 <<  1) // Pin Controlled by PA1
2186 
#define AT91C_PA1_TXD0            (AT91C_PIO_PA1) //  USART 0 Transmit Data
2187 
#define AT91C_PIO_PA10            (1 << 10) // Pin Controlled by PA10
2188 
#define AT91C_PA10_TWD            (AT91C_PIO_PA10) //  TWI Two-wire Serial Data
2189 
#define AT91C_PIO_PA11            (1 << 11) // Pin Controlled by PA11
2190 
#define AT91C_PA11_TWCK           (AT91C_PIO_PA11) //  TWI Two-wire Serial Clock
2191 
#define AT91C_PIO_PA12            (1 << 12) // Pin Controlled by PA12
2192 
#define AT91C_PA12_NPCS00         (AT91C_PIO_PA12) //  SPI 0 Peripheral Chip Select 0
2193 
#define AT91C_PIO_PA13            (1 << 13) // Pin Controlled by PA13
2194 
#define AT91C_PA13_NPCS01         (AT91C_PIO_PA13) //  SPI 0 Peripheral Chip Select 1
2195 
#define AT91C_PA13_PCK1           (AT91C_PIO_PA13) //  PMC Programmable Clock Output 1
2196 
#define AT91C_PIO_PA14            (1 << 14) // Pin Controlled by PA14
2197 
#define AT91C_PA14_NPCS02         (AT91C_PIO_PA14) //  SPI 0 Peripheral Chip Select 2
2198 
#define AT91C_PA14_IRQ1           (AT91C_PIO_PA14) //  External Interrupt 1
2199 
#define AT91C_PIO_PA15            (1 << 15) // Pin Controlled by PA15
2200 
#define AT91C_PA15_NPCS03         (AT91C_PIO_PA15) //  SPI 0 Peripheral Chip Select 3
2201 
#define AT91C_PA15_TCLK2          (AT91C_PIO_PA15) //  Timer Counter 2 external clock input
2202 
#define AT91C_PIO_PA16            (1 << 16) // Pin Controlled by PA16
2203 
#define AT91C_PA16_MISO0          (AT91C_PIO_PA16) //  SPI 0 Master In Slave
2204 
#define AT91C_PIO_PA17            (1 << 17) // Pin Controlled by PA17
2205 
#define AT91C_PA17_MOSI0          (AT91C_PIO_PA17) //  SPI 0 Master Out Slave
2206 
#define AT91C_PIO_PA18            (1 << 18) // Pin Controlled by PA18
2207 
#define AT91C_PA18_SPCK0          (AT91C_PIO_PA18) //  SPI 0 Serial Clock
2208 
#define AT91C_PIO_PA19            (1 << 19) // Pin Controlled by PA19
2209 
#define AT91C_PA19_CANRX          (AT91C_PIO_PA19) //  CAN Receive
2210 
#define AT91C_PIO_PA2             (1 <<  2) // Pin Controlled by PA2
2211 
#define AT91C_PA2_SCK0            (AT91C_PIO_PA2) //  USART 0 Serial Clock
2212 
#define AT91C_PA2_NPCS11          (AT91C_PIO_PA2) //  SPI 1 Peripheral Chip Select 1
2213 
#define AT91C_PIO_PA20            (1 << 20) // Pin Controlled by PA20
2214 
#define AT91C_PA20_CANTX          (AT91C_PIO_PA20) //  CAN Transmit
2215 
#define AT91C_PIO_PA21            (1 << 21) // Pin Controlled by PA21
2216 
#define AT91C_PA21_TF             (AT91C_PIO_PA21) //  SSC Transmit Frame Sync
2217 
#define AT91C_PA21_NPCS10         (AT91C_PIO_PA21) //  SPI 1 Peripheral Chip Select 0
2218 
#define AT91C_PIO_PA22            (1 << 22) // Pin Controlled by PA22
2219 
#define AT91C_PA22_TK             (AT91C_PIO_PA22) //  SSC Transmit Clock
2220 
#define AT91C_PA22_SPCK1          (AT91C_PIO_PA22) //  SPI 1 Serial Clock
2221 
#define AT91C_PIO_PA23            (1 << 23) // Pin Controlled by PA23
2222 
#define AT91C_PA23_TD             (AT91C_PIO_PA23) //  SSC Transmit data
2223 
#define AT91C_PA23_MOSI1          (AT91C_PIO_PA23) //  SPI 1 Master Out Slave
2224 
#define AT91C_PIO_PA24            (1 << 24) // Pin Controlled by PA24
2225 
#define AT91C_PA24_RD             (AT91C_PIO_PA24) //  SSC Receive Data
2226 
#define AT91C_PA24_MISO1          (AT91C_PIO_PA24) //  SPI 1 Master In Slave
2227 
#define AT91C_PIO_PA25            (1 << 25) // Pin Controlled by PA25
2228 
#define AT91C_PA25_RK             (AT91C_PIO_PA25) //  SSC Receive Clock
2229 
#define AT91C_PA25_NPCS11         (AT91C_PIO_PA25) //  SPI 1 Peripheral Chip Select 1
2230 
#define AT91C_PIO_PA26            (1 << 26) // Pin Controlled by PA26
2231 
#define AT91C_PA26_RF             (AT91C_PIO_PA26) //  SSC Receive Frame Sync
2232 
#define AT91C_PA26_NPCS12         (AT91C_PIO_PA26) //  SPI 1 Peripheral Chip Select 2
2233 
#define AT91C_PIO_PA27            (1 << 27) // Pin Controlled by PA27
2234 
#define AT91C_PA27_DRXD           (AT91C_PIO_PA27) //  DBGU Debug Receive Data
2235 
#define AT91C_PA27_PCK3           (AT91C_PIO_PA27) //  PMC Programmable Clock Output 3
2236 
#define AT91C_PIO_PA28            (1 << 28) // Pin Controlled by PA28
2237 
#define AT91C_PA28_DTXD           (AT91C_PIO_PA28) //  DBGU Debug Transmit Data
2238 
#define AT91C_PIO_PA29            (1 << 29) // Pin Controlled by PA29
2239 
#define AT91C_PA29_FIQ            (AT91C_PIO_PA29) //  AIC Fast Interrupt Input
2240 
#define AT91C_PA29_NPCS13         (AT91C_PIO_PA29) //  SPI 1 Peripheral Chip Select 3
2241 
#define AT91C_PIO_PA3             (1 <<  3) // Pin Controlled by PA3
2242 
#define AT91C_PA3_RTS0            (AT91C_PIO_PA3) //  USART 0 Ready To Send
2243 
#define AT91C_PA3_NPCS12          (AT91C_PIO_PA3) //  SPI 1 Peripheral Chip Select 2
2244 
#define AT91C_PIO_PA30            (1 << 30) // Pin Controlled by PA30
2245 
#define AT91C_PA30_IRQ0           (AT91C_PIO_PA30) //  External Interrupt 0
2246 
#define AT91C_PA30_PCK2           (AT91C_PIO_PA30) //  PMC Programmable Clock Output 2
2247 
#define AT91C_PIO_PA4             (1 <<  4) // Pin Controlled by PA4
2248 
#define AT91C_PA4_CTS0            (AT91C_PIO_PA4) //  USART 0 Clear To Send
2249 
#define AT91C_PA4_NPCS13          (AT91C_PIO_PA4) //  SPI 1 Peripheral Chip Select 3
2250 
#define AT91C_PIO_PA5             (1 <<  5) // Pin Controlled by PA5
2251 
#define AT91C_PA5_RXD1            (AT91C_PIO_PA5) //  USART 1 Receive Data
2252 
#define AT91C_PIO_PA6             (1 <<  6) // Pin Controlled by PA6
2253 
#define AT91C_PA6_TXD1            (AT91C_PIO_PA6) //  USART 1 Transmit Data
2254 
#define AT91C_PIO_PA7             (1 <<  7) // Pin Controlled by PA7
2255 
#define AT91C_PA7_SCK1            (AT91C_PIO_PA7) //  USART 1 Serial Clock
2256 
#define AT91C_PA7_NPCS01          (AT91C_PIO_PA7) //  SPI 0 Peripheral Chip Select 1
2257 
#define AT91C_PIO_PA8             (1 <<  8) // Pin Controlled by PA8
2258 
#define AT91C_PA8_RTS1            (AT91C_PIO_PA8) //  USART 1 Ready To Send
2259 
#define AT91C_PA8_NPCS02          (AT91C_PIO_PA8) //  SPI 0 Peripheral Chip Select 2
2260 
#define AT91C_PIO_PA9             (1 <<  9) // Pin Controlled by PA9
2261 
#define AT91C_PA9_CTS1            (AT91C_PIO_PA9) //  USART 1 Clear To Send
2262 
#define AT91C_PA9_NPCS03          (AT91C_PIO_PA9) //  SPI 0 Peripheral Chip Select 3
2263 
#define AT91C_PIO_PB0             (1 <<  0) // Pin Controlled by PB0
2264 
#define AT91C_PB0_ETXCK_EREFCK    (AT91C_PIO_PB0) //  Ethernet MAC Transmit Clock/Reference Clock
2265 
#define AT91C_PB0_PCK0            (AT91C_PIO_PB0) //  PMC Programmable Clock Output 0
2266 
#define AT91C_PIO_PB1             (1 <<  1) // Pin Controlled by PB1
2267 
#define AT91C_PB1_ETXEN           (AT91C_PIO_PB1) //  Ethernet MAC Transmit Enable
2268 
#define AT91C_PIO_PB10            (1 << 10) // Pin Controlled by PB10
2269 
#define AT91C_PB10_ETX2           (AT91C_PIO_PB10) //  Ethernet MAC Transmit Data 2
2270 
#define AT91C_PB10_NPCS11         (AT91C_PIO_PB10) //  SPI 1 Peripheral Chip Select 1
2271 
#define AT91C_PIO_PB11            (1 << 11) // Pin Controlled by PB11
2272 
#define AT91C_PB11_ETX3           (AT91C_PIO_PB11) //  Ethernet MAC Transmit Data 3
2273 
#define AT91C_PB11_NPCS12         (AT91C_PIO_PB11) //  SPI 1 Peripheral Chip Select 2
2274 
#define AT91C_PIO_PB12            (1 << 12) // Pin Controlled by PB12
2275 
#define AT91C_PB12_ETXER          (AT91C_PIO_PB12) //  Ethernet MAC Transmikt Coding Error
2276 
#define AT91C_PB12_TCLK0          (AT91C_PIO_PB12) //  Timer Counter 0 external clock input
2277 
#define AT91C_PIO_PB13            (1 << 13) // Pin Controlled by PB13
2278 
#define AT91C_PB13_ERX2           (AT91C_PIO_PB13) //  Ethernet MAC Receive Data 2
2279 
#define AT91C_PB13_NPCS01         (AT91C_PIO_PB13) //  SPI 0 Peripheral Chip Select 1
2280 
#define AT91C_PIO_PB14            (1 << 14) // Pin Controlled by PB14
2281 
#define AT91C_PB14_ERX3           (AT91C_PIO_PB14) //  Ethernet MAC Receive Data 3
2282 
#define AT91C_PB14_NPCS02         (AT91C_PIO_PB14) //  SPI 0 Peripheral Chip Select 2
2283 
#define AT91C_PIO_PB15            (1 << 15) // Pin Controlled by PB15
2284 
#define AT91C_PB15_ERXDV          (AT91C_PIO_PB15) //  Ethernet MAC Receive Data Valid
2285 
#define AT91C_PIO_PB16            (1 << 16) // Pin Controlled by PB16
2286 
#define AT91C_PB16_ECOL           (AT91C_PIO_PB16) //  Ethernet MAC Collision Detected
2287 
#define AT91C_PB16_NPCS13         (AT91C_PIO_PB16) //  SPI 1 Peripheral Chip Select 3
2288 
#define AT91C_PIO_PB17            (1 << 17) // Pin Controlled by PB17
2289 
#define AT91C_PB17_ERXCK          (AT91C_PIO_PB17) //  Ethernet MAC Receive Clock
2290 
#define AT91C_PB17_NPCS03         (AT91C_PIO_PB17) //  SPI 0 Peripheral Chip Select 3
2291 
#define AT91C_PIO_PB18            (1 << 18) // Pin Controlled by PB18
2292 
#define AT91C_PB18_EF100          (AT91C_PIO_PB18) //  Ethernet MAC Force 100 Mbits/sec
2293 
#define AT91C_PB18_ADTRG          (AT91C_PIO_PB18) //  ADC External Trigger
2294 
#define AT91C_PIO_PB19            (1 << 19) // Pin Controlled by PB19
2295 
#define AT91C_PB19_PWM0           (AT91C_PIO_PB19) //  PWM Channel 0
2296 
#define AT91C_PB19_TCLK1          (AT91C_PIO_PB19) //  Timer Counter 1 external clock input
2297 
#define AT91C_PIO_PB2             (1 <<  2) // Pin Controlled by PB2
2298 
#define AT91C_PB2_ETX0            (AT91C_PIO_PB2) //  Ethernet MAC Transmit Data 0
2299 
#define AT91C_PIO_PB20            (1 << 20) // Pin Controlled by PB20
2300 
#define AT91C_PB20_PWM1           (AT91C_PIO_PB20) //  PWM Channel 1
2301 
#define AT91C_PB20_PCK0           (AT91C_PIO_PB20) //  PMC Programmable Clock Output 0
2302 
#define AT91C_PIO_PB21            (1 << 21) // Pin Controlled by PB21
2303 
#define AT91C_PB21_PWM2           (AT91C_PIO_PB21) //  PWM Channel 2
2304 
#define AT91C_PB21_PCK1           (AT91C_PIO_PB21) //  PMC Programmable Clock Output 1
2305 
#define AT91C_PIO_PB22            (1 << 22) // Pin Controlled by PB22
2306 
#define AT91C_PB22_PWM3           (AT91C_PIO_PB22) //  PWM Channel 3
2307 
#define AT91C_PB22_PCK2           (AT91C_PIO_PB22) //  PMC Programmable Clock Output 2
2308 
#define AT91C_PIO_PB23            (1 << 23) // Pin Controlled by PB23
2309 
#define AT91C_PB23_TIOA0          (AT91C_PIO_PB23) //  Timer Counter 0 Multipurpose Timer I/O Pin A
2310 
#define AT91C_PB23_DCD1           (AT91C_PIO_PB23) //  USART 1 Data Carrier Detect
2311 
#define AT91C_PIO_PB24            (1 << 24) // Pin Controlled by PB24
2312 
#define AT91C_PB24_TIOB0          (AT91C_PIO_PB24) //  Timer Counter 0 Multipurpose Timer I/O Pin B
2313 
#define AT91C_PB24_DSR1           (AT91C_PIO_PB24) //  USART 1 Data Set ready
2314 
#define AT91C_PIO_PB25            (1 << 25) // Pin Controlled by PB25
2315 
#define AT91C_PB25_TIOA1          (AT91C_PIO_PB25) //  Timer Counter 1 Multipurpose Timer I/O Pin A
2316 
#define AT91C_PB25_DTR1           (AT91C_PIO_PB25) //  USART 1 Data Terminal ready
2317 
#define AT91C_PIO_PB26            (1 << 26) // Pin Controlled by PB26
2318 
#define AT91C_PB26_TIOB1          (AT91C_PIO_PB26) //  Timer Counter 1 Multipurpose Timer I/O Pin B
2319 
#define AT91C_PB26_RI1            (AT91C_PIO_PB26) //  USART 1 Ring Indicator
2320 
#define AT91C_PIO_PB27            (1 << 27) // Pin Controlled by PB27
2321 
#define AT91C_PB27_TIOA2          (AT91C_PIO_PB27) //  Timer Counter 2 Multipurpose Timer I/O Pin A
2322 
#define AT91C_PB27_PWM0           (AT91C_PIO_PB27) //  PWM Channel 0
2323 
#define AT91C_PIO_PB28            (1 << 28) // Pin Controlled by PB28
2324 
#define AT91C_PB28_TIOB2          (AT91C_PIO_PB28) //  Timer Counter 2 Multipurpose Timer I/O Pin B
2325 
#define AT91C_PB28_PWM1           (AT91C_PIO_PB28) //  PWM Channel 1
2326 
#define AT91C_PIO_PB29            (1 << 29) // Pin Controlled by PB29
2327 
#define AT91C_PB29_PCK1           (AT91C_PIO_PB29) //  PMC Programmable Clock Output 1
2328 
#define AT91C_PB29_PWM2           (AT91C_PIO_PB29) //  PWM Channel 2
2329 
#define AT91C_PIO_PB3             (1 <<  3) // Pin Controlled by PB3
2330 
#define AT91C_PB3_ETX1            (AT91C_PIO_PB3) //  Ethernet MAC Transmit Data 1
2331 
#define AT91C_PIO_PB30            (1 << 30) // Pin Controlled by PB30
2332 
#define AT91C_PB30_PCK2           (AT91C_PIO_PB30) //  PMC Programmable Clock Output 2
2333 
#define AT91C_PB30_PWM3           (AT91C_PIO_PB30) //  PWM Channel 3
2334 
#define AT91C_PIO_PB4             (1 <<  4) // Pin Controlled by PB4
2335 
#define AT91C_PB4_ECRS_ECRSDV     (AT91C_PIO_PB4) //  Ethernet MAC Carrier Sense/Carrier Sense and Data Valid
2336 
#define AT91C_PIO_PB5             (1 <<  5) // Pin Controlled by PB5
2337 
#define AT91C_PB5_ERX0            (AT91C_PIO_PB5) //  Ethernet MAC Receive Data 0
2338 
#define AT91C_PIO_PB6             (1 <<  6) // Pin Controlled by PB6
2339 
#define AT91C_PB6_ERX1            (AT91C_PIO_PB6) //  Ethernet MAC Receive Data 1
2340 
#define AT91C_PIO_PB7             (1 <<  7) // Pin Controlled by PB7
2341 
#define AT91C_PB7_ERXER           (AT91C_PIO_PB7) //  Ethernet MAC Receive Error
2342 
#define AT91C_PIO_PB8             (1 <<  8) // Pin Controlled by PB8
2343 
#define AT91C_PB8_EMDC            (AT91C_PIO_PB8) //  Ethernet MAC Management Data Clock
2344 
#define AT91C_PIO_PB9             (1 <<  9) // Pin Controlled by PB9
2345 
#define AT91C_PB9_EMDIO           (AT91C_PIO_PB9) //  Ethernet MAC Management Data Input/Output
2346 
 
2347 
// *****************************************************************************
2348 
//               PERIPHERAL ID DEFINITIONS FOR AT91SAM7X128
2349 
// *****************************************************************************
2350 
#define AT91C_ID_FIQ              ( 0) // Advanced Interrupt Controller (FIQ)
2351 
#define AT91C_ID_SYS              ( 1) // System Peripheral
2352 
#define AT91C_ID_PIOA             ( 2) // Parallel IO Controller A
2353 
#define AT91C_ID_PIOB             ( 3) // Parallel IO Controller B
2354 
#define AT91C_ID_SPI0             ( 4) // Serial Peripheral Interface 0
2355 
#define AT91C_ID_SPI1             ( 5) // Serial Peripheral Interface 1
2356 
#define AT91C_ID_US0              ( 6) // USART 0
2357 
#define AT91C_ID_US1              ( 7) // USART 1
2358 
#define AT91C_ID_SSC              ( 8) // Serial Synchronous Controller
2359 
#define AT91C_ID_TWI              ( 9) // Two-Wire Interface
2360 
#define AT91C_ID_PWMC             (10) // PWM Controller
2361 
#define AT91C_ID_UDP              (11) // USB Device Port
2362 
#define AT91C_ID_TC0              (12) // Timer Counter 0
2363 
#define AT91C_ID_TC1              (13) // Timer Counter 1
2364 
#define AT91C_ID_TC2              (14) // Timer Counter 2
2365 
#define AT91C_ID_CAN              (15) // Control Area Network Controller
2366 
#define AT91C_ID_EMAC             (16) // Ethernet MAC
2367 
#define AT91C_ID_ADC              (17) // Analog-to-Digital Converter
2368 
#define AT91C_ID_AES              (18) // Advanced Encryption Standard 128-bit
2369 
#define AT91C_ID_TDES             (19) // Triple Data Encryption Standard
2370 
#define AT91C_ID_20_Reserved      (20) // Reserved
2371 
#define AT91C_ID_21_Reserved      (21) // Reserved
2372 
#define AT91C_ID_22_Reserved      (22) // Reserved
2373 
#define AT91C_ID_23_Reserved      (23) // Reserved
2374 
#define AT91C_ID_24_Reserved      (24) // Reserved
2375 
#define AT91C_ID_25_Reserved      (25) // Reserved
2376 
#define AT91C_ID_26_Reserved      (26) // Reserved
2377 
#define AT91C_ID_27_Reserved      (27) // Reserved
2378 
#define AT91C_ID_28_Reserved      (28) // Reserved
2379 
#define AT91C_ID_29_Reserved      (29) // Reserved
2380 
#define AT91C_ID_IRQ0             (30) // Advanced Interrupt Controller (IRQ0)
2381 
#define AT91C_ID_IRQ1             (31) // Advanced Interrupt Controller (IRQ1)
2382 
 
2383 
// *****************************************************************************
2384 
//               BASE ADDRESS DEFINITIONS FOR AT91SAM7X128
2385 
// *****************************************************************************
2386 
#define AT91C_BASE_SYS            (0xFFFFF000) // (SYS) Base Address
2387 
#define AT91C_BASE_AIC            (0xFFFFF000) // (AIC) Base Address
2388 
#define AT91C_BASE_PDC_DBGU       (0xFFFFF300) // (PDC_DBGU) Base Address
2389 
#define AT91C_BASE_DBGU           (0xFFFFF200) // (DBGU) Base Address
2390 
#define AT91C_BASE_PIOA           (0xFFFFF400) // (PIOA) Base Address
2391 
#define AT91C_BASE_PIOB           (0xFFFFF600) // (PIOB) Base Address
2392 
#define AT91C_BASE_CKGR           (0xFFFFFC20) // (CKGR) Base Address
2393 
#define AT91C_BASE_PMC            (0xFFFFFC00) // (PMC) Base Address
2394 
#define AT91C_BASE_RSTC           (0xFFFFFD00) // (RSTC) Base Address
2395 
#define AT91C_BASE_RTTC           (0xFFFFFD20) // (RTTC) Base Address
2396 
#define AT91C_BASE_PITC           (0xFFFFFD30) // (PITC) Base Address
2397 
#define AT91C_BASE_WDTC           (0xFFFFFD40) // (WDTC) Base Address
2398 
#define AT91C_BASE_VREG           (0xFFFFFD60) // (VREG) Base Address
2399 
#define AT91C_BASE_MC             (0xFFFFFF00) // (MC) Base Address
2400 
#define AT91C_BASE_PDC_SPI1       (0xFFFE4100) // (PDC_SPI1) Base Address
2401 
#define AT91C_BASE_SPI1           (0xFFFE4000) // (SPI1) Base Address
2402 
#define AT91C_BASE_PDC_SPI0       (0xFFFE0100) // (PDC_SPI0) Base Address
2403 
#define AT91C_BASE_SPI0           (0xFFFE0000) // (SPI0) Base Address
2404 
#define AT91C_BASE_PDC_US1        (0xFFFC4100) // (PDC_US1) Base Address
2405 
#define AT91C_BASE_US1            (0xFFFC4000) // (US1) Base Address
2406 
#define AT91C_BASE_PDC_US0        (0xFFFC0100) // (PDC_US0) Base Address
2407 
#define AT91C_BASE_US0            (0xFFFC0000) // (US0) Base Address
2408 
#define AT91C_BASE_PDC_SSC        (0xFFFD4100) // (PDC_SSC) Base Address
2409 
#define AT91C_BASE_SSC            (0xFFFD4000) // (SSC) Base Address
2410 
#define AT91C_BASE_TWI            (0xFFFB8000) // (TWI) Base Address
2411 
#define AT91C_BASE_PWMC_CH3       (0xFFFCC260) // (PWMC_CH3) Base Address
2412 
#define AT91C_BASE_PWMC_CH2       (0xFFFCC240) // (PWMC_CH2) Base Address
2413 
#define AT91C_BASE_PWMC_CH1       (0xFFFCC220) // (PWMC_CH1) Base Address
2414 
#define AT91C_BASE_PWMC_CH0       (0xFFFCC200) // (PWMC_CH0) Base Address
2415 
#define AT91C_BASE_PWMC           (0xFFFCC000) // (PWMC) Base Address
2416 
#define AT91C_BASE_UDP            (0xFFFB0000) // (UDP) Base Address
2417 
#define AT91C_BASE_TC0            (0xFFFA0000) // (TC0) Base Address
2418 
#define AT91C_BASE_TC1            (0xFFFA0040) // (TC1) Base Address
2419 
#define AT91C_BASE_TC2            (0xFFFA0080) // (TC2) Base Address
2420 
#define AT91C_BASE_TCB            (0xFFFA0000) // (TCB) Base Address
2421 
#define AT91C_BASE_CAN_MB0        (0xFFFD0200) // (CAN_MB0) Base Address
2422 
#define AT91C_BASE_CAN_MB1        (0xFFFD0220) // (CAN_MB1) Base Address
2423 
#define AT91C_BASE_CAN_MB2        (0xFFFD0240) // (CAN_MB2) Base Address
2424 
#define AT91C_BASE_CAN_MB3        (0xFFFD0260) // (CAN_MB3) Base Address
2425 
#define AT91C_BASE_CAN_MB4        (0xFFFD0280) // (CAN_MB4) Base Address
2426 
#define AT91C_BASE_CAN_MB5        (0xFFFD02A0) // (CAN_MB5) Base Address
2427 
#define AT91C_BASE_CAN_MB6        (0xFFFD02C0) // (CAN_MB6) Base Address
2428 
#define AT91C_BASE_CAN_MB7        (0xFFFD02E0) // (CAN_MB7) Base Address
2429 
#define AT91C_BASE_CAN            (0xFFFD0000) // (CAN) Base Address
2430 
#define AT91C_BASE_EMAC           (0xFFFDC000) // (EMAC) Base Address
2431 
#define AT91C_BASE_PDC_ADC        (0xFFFD8100) // (PDC_ADC) Base Address
2432 
#define AT91C_BASE_ADC            (0xFFFD8000) // (ADC) Base Address
2433 
#define AT91C_BASE_PDC_AES        (0xFFFA4100) // (PDC_AES) Base Address
2434 
#define AT91C_BASE_AES            (0xFFFA4000) // (AES) Base Address
2435 
#define AT91C_BASE_PDC_TDES       (0xFFFA8100) // (PDC_TDES) Base Address
2436 
#define AT91C_BASE_TDES           (0xFFFA8000) // (TDES) Base Address
2437 
 
2438 
// *****************************************************************************
2439 
//               MEMORY MAPPING DEFINITIONS FOR AT91SAM7X128
2440 
// *****************************************************************************
2441 
#define AT91C_ISRAM                   (0x00200000) // Internal SRAM base address
2442 
#define AT91C_ISRAM_SIZE                 (0x00008000) // Internal SRAM size in byte (32 Kbyte)
2443 
#define AT91C_IFLASH                 (0x00100000) // Internal ROM base address
2444 
#define AT91C_IFLASH_SIZE               (0x00020000) // Internal ROM size in byte (128 Kbyte)
2445 
 
2446 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.