Subversion Repositories openrisc

/*

 *------------------------------------------------------------------

 *

 *      m68302.h - Definitions for Motorola MC68302 processor.

 *

 * Section references in this file refer to revision 2 of Motorola's

 * "MC68302 Integrated Multiprotocol Processor User's Manual".

 * (Motorola document MC68302UM/AD REV 2.)

 *

 * Based on Don Meyer's cpu68302.h that was posted in comp.sys.m68k

 * on 17 February, 1993.

 *

 * Copyright 1995 David W. Glessner.

 *

 * Redistribution and use in source and binary forms are permitted

 * provided that the following conditions are met:

 * 1. Redistribution of source code and documentation must retain

 *    the above copyright notice, this list of conditions and the

 *    following disclaimer.

 * 2. The name of the author may not be used to endorse or promote

 *    products derived from this software without specific prior

 *    written permission.

 *

 * This software is provided "AS IS" without warranty of any kind,

 * either expressed or implied, including, but not limited to, the

 * implied warranties of merchantability, title and fitness for a

 * particular purpose.

 *

 *

 *  $Id: m68302.h,v 1.2 2001-09-27 11:59:28 chris Exp $

 *

 *------------------------------------------------------------------

 */

#ifndef __MOTOROLA_MC68302_DEFINITIONS_h

#define __MOTOROLA_MC68302_DEFINITIONS_h

/*

 * BAR - Base Address Register

 * Section 2.7

 */

#define M302_BAR        (*((volatile rtems_unsigned16 *) 0xf2))

/*

 * SCR - System Control Register

 * Section 3.8.1

 */

#define M302_SCR        (*((volatile rtems_unsigned32 *) 0xf4))

/*

 * SCR bits

 */

#define RBIT_SCR_IPA            0x08000000

#define RBIT_SCR_HWT            0x04000000

#define RBIT_SCR_WPV            0x02000000

#define RBIT_SCR_ADC            0x01000000

#define RBIT_SCR_ERRE           0x00400000

#define RBIT_SCR_VGE            0x00200000

#define RBIT_SCR_WPVE           0x00100000

#define RBIT_SCR_RMCST          0x00080000

#define RBIT_SCR_EMWS           0x00040000

#define RBIT_SCR_ADCE           0x00020000

#define RBIT_SCR_BCLM           0x00010000

#define RBIT_SCR_FRZW           0x00008000

#define RBIT_SCR_FRZ2           0x00004000

#define RBIT_SCR_FRZ1           0x00002000

#define RBIT_SCR_SAM            0x00001000

#define RBIT_SCR_HWDEN          0x00000800

#define RBIT_SCR_HWDCN2         0x00000400

#define RBIT_SCR_HWDCN1         0x00000200  /* 512 clocks */

#define RBIT_SCR_HWDCN0         0x00000100  /* 128 clocks */

#define RBIT_SCR_LPREC          0x00000080

#define RBIT_SCR_LPP16          0x00000040

#define RBIT_SCR_LPEN           0x00000020

#define RBIT_SCR_LPCLKDIV       0x0000001f

/*

 * 68000 interrupt and trap vector numbers

 */

#define M68K_IVEC_BUS_ERROR              2

#define M68K_IVEC_ADDRESS_ERROR          3

#define M68K_IVEC_ILLEGAL_OPCODE         4

#define M68K_IVEC_ZERO_DIVIDE            5

#define M68K_IVEC_CHK                    6

#define M68K_IVEC_TRAPV                  7

#define M68K_IVEC_PRIVILEGE              8

#define M68K_IVEC_TRACE                  9

#define M68K_IVEC_LINE_A                10

#define M68K_IVEC_LINE_F                11

/*      Unassigned, Reserved            12-14 */

#define M68K_IVEC_UNINITIALIZED_INT     15

/*      Unassigned, Reserved            16-23 */

#define M68K_IVEC_SPURIOUS_INT          24

#define M68K_IVEC_LEVEL1_AUTOVECTOR     25

#define M68K_IVEC_LEVEL2_AUTOVECTOR     26

#define M68K_IVEC_LEVEL3_AUTOVECTOR     27

#define M68K_IVEC_LEVEL4_AUTOVECTOR     28

#define M68K_IVEC_LEVEL5_AUTOVECTOR     29

#define M68K_IVEC_LEVEL6_AUTOVECTOR     30

#define M68K_IVEC_LEVEL7_AUTOVECTOR     31

#define M68K_IVEC_TRAP0                 32

#define M68K_IVEC_TRAP1                 33

#define M68K_IVEC_TRAP2                 34

#define M68K_IVEC_TRAP3                 35

#define M68K_IVEC_TRAP4                 36

#define M68K_IVEC_TRAP5                 37

#define M68K_IVEC_TRAP6                 38

#define M68K_IVEC_TRAP7                 39

#define M68K_IVEC_TRAP8                 40

#define M68K_IVEC_TRAP9                 41

#define M68K_IVEC_TRAP10                42

#define M68K_IVEC_TRAP11                43

#define M68K_IVEC_TRAP12                44

#define M68K_IVEC_TRAP13                45

#define M68K_IVEC_TRAP14                46

#define M68K_IVEC_TRAP15                47

/*

 *      Unassigned, Reserved            48-59

 *

 * Note: Vectors 60-63 are used by the MC68302 (e.g. BAR, SCR).

 */

/*

 * MC68302 Interrupt Vectors

 * Section 3.2

 */

enum m68302_ivec_e {

    M302_IVEC_ERR       =0,

    M302_IVEC_PB8       =1,     /* General-Purpose Interrupt 0 */

    M302_IVEC_SMC2      =2,

    M302_IVEC_SMC1      =3,

    M302_IVEC_TIMER3    =4,

    M302_IVEC_SCP       =5,

    M302_IVEC_TIMER2    =6,

    M302_IVEC_PB9       =7,     /* General-Purpose Interrupt 1 */

    M302_IVEC_SCC3      =8,

    M302_IVEC_TIMER1    =9,

    M302_IVEC_SCC2      =10,

    M302_IVEC_IDMA      =11,

    M302_IVEC_SDMA      =12,    /* SDMA Channels Bus Error */

    M302_IVEC_SCC1      =13,

    M302_IVEC_PB10      =14,    /* General-Purpose Interrupt 2 */

    M302_IVEC_PB11      =15,    /* General-Purpose Interrupt 3 */

    M302_IVEC_IRQ1      =17,    /* External Device */

    M302_IVEC_IRQ6      =22,    /* External Device */

    M302_IVEC_IRQ7      =23     /* External Device */

};

/*

 * GIMR - Global Interrupt Mode Register

 * Section 3.2.5.1

 */

#define RBIT_GIMR_MOD           (1<<15)

#define RBIT_GIMR_IV7           (1<<14)

#define RBIT_GIMR_IV6           (1<<13)

#define RBIT_GIMR_IV1           (1<<12)

#define RBIT_GIMR_ET7           (1<<10)

#define RBIT_GIMR_ET6           (1<<9)

#define RBIT_GIMR_ET1           (1<<8)

#define RBIT_GIMR_VECTOR        (7<<5)

/*

 * IPR - Interrupt Pending Register    (Section 3.2.5.2)

 * IMR - Interrupt Mask Register       (Section 3.2.5.3)

 * ISR - Interrupt In-Service Register (Section 3.2.5.4)

 */

#define RBIT_IPR_PB11           (1<<15)

#define RBIT_IPR_PB10           (1<<14)

#define RBIT_IPR_SCC1           (1<<13)

#define RBIT_IPR_SDMA           (1<<12)

#define RBIT_IPR_IDMA           (1<<11)

#define RBIT_IPR_SCC2           (1<<10)

#define RBIT_IPR_TIMER1         (1<<9)

#define RBIT_IPR_SCC3           (1<<8)

#define RBIT_IPR_PB9            (1<<7)

#define RBIT_IPR_TIMER2         (1<<6)

#define RBIT_IPR_SCP            (1<<5)

#define RBIT_IPR_TIMER3         (1<<4)

#define RBIT_IPR_SMC1           (1<<3)

#define RBIT_IPR_SMC2           (1<<2)

#define RBIT_IPR_PB8            (1<<1)

#define RBIT_IPR_ERR            (1<<0)

#define RBIT_ISR_PB11           (1<<15)

#define RBIT_ISR_PB10           (1<<14)

#define RBIT_ISR_SCC1           (1<<13)

#define RBIT_ISR_SDMA           (1<<12)

#define RBIT_ISR_IDMA           (1<<11)

#define RBIT_ISR_SCC2           (1<<10)

#define RBIT_ISR_TIMER1         (1<<9)

#define RBIT_ISR_SCC3           (1<<8)

#define RBIT_ISR_PB9            (1<<7)

#define RBIT_ISR_TIMER2         (1<<6)

#define RBIT_ISR_SCP            (1<<5)

#define RBIT_ISR_TIMER3         (1<<4)

#define RBIT_ISR_SMC1           (1<<3)

#define RBIT_ISR_SMC2           (1<<2)

#define RBIT_ISR_PB8            (1<<1)

#define RBIT_IMR_PB11           (1<<15)         /* PB11   Interrupt Mask */

#define RBIT_IMR_PB10           (1<<14)         /* PB10   Interrupt Mask */

#define RBIT_IMR_SCC1           (1<<13)         /* SCC1   Interrupt Mask */

#define RBIT_IMR_SDMA           (1<<12)         /* SDMA   Interrupt Mask */

#define RBIT_IMR_IDMA           (1<<11)         /* IDMA   Interrupt Mask */

#define RBIT_IMR_SCC2           (1<<10)         /* SCC2   Interrupt Mask */

#define RBIT_IMR_TIMER1         (1<<9)          /* TIMER1 Interrupt Mask */

#define RBIT_IMR_SCC3           (1<<8)          /* SCC3   Interrupt Mask */

#define RBIT_IMR_PB9            (1<<7)          /* PB9    Interrupt Mask */

#define RBIT_IMR_TIMER2         (1<<6)          /* TIMER2 Interrupt Mask */

#define RBIT_IMR_SCP            (1<<5)          /* SCP    Interrupt Mask */

#define RBIT_IMR_TIMER3         (1<<4)          /* TIMER3 Interrupt Mask */

#define RBIT_IMR_SMC1           (1<<3)          /* SMC1   Interrupt Mask */

#define RBIT_IMR_SMC2           (1<<2)          /* SMC2   Interrupt Mask */

#define RBIT_IMR_PB8            (1<<1)          /* PB8    Interrupt Mask */

/*

 * DRAM Refresh

 * Section 3.9

 *

 * The DRAM refresh memory map replaces the SCC2 Tx BD 6 and Tx BD 7

 * structures in the parameter RAM.

 *

 * Access to the DRAM registers can be accomplished by

 * the following approach:

 *

 *      volatile m302_DRAM_refresh_t *dram;

 *      dram = (volatile m302_DRAM_refresh_t *) &m302.scc2.bd.tx[6];

 *

 * Then simply use pointer references (e.g. dram->count = 3).

 */

typedef struct {

    rtems_unsigned16    dram_high;      /* DRAM high address and FC */

    rtems_unsigned16    dram_low;       /* DRAM low address */

    rtems_unsigned16    increment;      /* increment step (bytes/row) */

    rtems_unsigned16    count;          /* RAM refresh cycle count (#rows) */

    rtems_unsigned16    t_ptr_h;        /* temporary refresh high addr & FC */

    rtems_unsigned16    t_ptr_l;        /* temporary refresh low address */

    rtems_unsigned16    t_count;        /* temporary refresh cycles count */

    rtems_unsigned16    res;            /* reserved */

} m302_DRAM_refresh_t;

/*

 * TMR - Timer Mode Register (for timers 1 and 2)

 * Section 3.5.2.1

 */

#define RBIT_TMR_ICLK_STOP      (0<<1)

#define RBIT_TMR_ICLK_MASTER    (1<<1)

#define RBIT_TMR_ICLK_MASTER16  (2<<1)

#define RBIT_TMR_ICLK_TIN       (3<<1)

#define RBIT_TMR_OM             (1<<5)

#define RBIT_TMR_ORI            (1<<4)

#define RBIT_TMR_FRR            (1<<3)

#define RBIT_TMR_RST            (1<<0)

/*

 * TER - Timer Event Register (for timers 1 and 2)

 * Section 3.5.2.5

 */

#define RBIT_TER_REF    (1<<1)          /* Output Reference Event */

#define RBIT_TER_CAP    (1<<0)          /* Capture Event */

/*

 * SCC Buffer Descriptors and Buffer Descriptors Table

 * Section 4.5.5

 */

typedef struct m302_SCC_bd {

    rtems_unsigned16 status;            /* status and control */

    rtems_unsigned16 length;            /* data length */

    rtems_unsigned8  *buffer;           /* data buffer pointer */

} m302_SCC_bd_t;

typedef struct {

    m302_SCC_bd_t       rx[8];          /* receive buffer descriptors */

    m302_SCC_bd_t       tx[8];          /* transmit buffer descriptors */

} m302_SCC_bd_table_t;

/*

 * SCC Parameter RAM (offset 0x080 from an SCC Base)

 * Section 4.5.6

 *

 * Each SCC parameter RAM area begins at offset 0x80 from each SCC base

 * area (0x400, 0x500, or 0x600 from the dual-port RAM base).

 *

 * Offsets 0x9c-0xbf from each SCC base area compose the protocol-specific

 * portion of the SCC parameter RAM.

 */

typedef struct {

    rtems_unsigned8     rfcr;           /* Rx Function Code */

    rtems_unsigned8     tfcr;           /* Tx Function Code */

    rtems_unsigned16    mrblr;          /* Maximum Rx Buffer Length */

    rtems_unsigned16    _rstate;        /* Rx Internal State */

    rtems_unsigned8     res2;

    rtems_unsigned8     rbd;            /* Rx Internal Buffer Number */

    rtems_unsigned32    _rdptr;         /* Rx Internal Data Pointer */

    rtems_unsigned16    _rcount;        /* Rx Internal Byte Count */

    rtems_unsigned16    _rtmp;          /* Rx Temp */

    rtems_unsigned16    _tstate;        /* Tx Internal State */

    rtems_unsigned8     res7;

    rtems_unsigned8     tbd;            /* Tx Internal Buffer Number */

    rtems_unsigned32    _tdptr;         /* Tx Internal Data Pointer */

    rtems_unsigned16    _tcount;        /* Tx Internal Byte Count */

    rtems_unsigned16    _ttmp;          /* Tx Temp */

} m302_SCC_parameters_t;

/*

 * UART-Specific SCC Parameter RAM

 * Section 4.5.11.3

 */

typedef struct {

    rtems_unsigned16    max_idl;        /* Maximum IDLE Characters (rx) */

    rtems_unsigned16    idlc;           /* Temporary rx IDLE counter */

    rtems_unsigned16    brkcr;          /* Break Count Register (tx) */

    rtems_unsigned16    parec;          /* Receive Parity Error Counter */

    rtems_unsigned16    frmec;          /* Receive Framing Error Counter */

    rtems_unsigned16    nosec;          /* Receive Noise Counter */

    rtems_unsigned16    brkec;          /* Receive Break Condition Counter */

    rtems_unsigned16    uaddr1;         /* UART ADDRESS Character 1 */

    rtems_unsigned16    uaddr2;         /* UART ADDRESS Character 2 */

    rtems_unsigned16    rccr;           /* Receive Control Character Register */

    rtems_unsigned16    character[8];   /* Control Characters 1 through 8*/

} m302_SCC_UartSpecific_t;

/*

 *  This definition allows for the checking of receive buffers

 *  for errors.

 */

#define RCV_ERR    0x003F

/*

 * UART receive buffer descriptor bit definitions.

 * Section 4.5.11.14

 */

#define RBIT_UART_CTRL   (1<<11)        /* buffer contains a control char */

#define RBIT_UART_ADDR   (1<<10)        /* first byte contains an address */

#define RBIT_UART_MATCH  (1<<9)         /* indicates which addr char matched */

#define RBIT_UART_IDLE   (1<<8)         /* buffer closed due to IDLE sequence */

#define RBIT_UART_BR     (1<<5)         /* break sequence was received */

#define RBIT_UART_FR     (1<<4)         /* framing error was received */

#define RBIT_UART_PR     (1<<3)         /* parity error was received */

#define RBIT_UART_OV     (1<<1)         /* receiver overrun occurred */

#define RBIT_UART_CD     (1<<0)         /* carrier detect lost */

#define RBIT_UART_STATUS 0x003B         /* all status bits */

/*

 * UART transmit buffer descriptor bit definitions.

 * Section 4.5.11.15

 */

#define RBIT_UART_CR       (1<<11)      /* clear-to-send report

                                         * this results in two idle bits

                                         * between back-to-back frames

                                         */

#define RBIT_UART_A        (1<<10)      /* buffer contains address characters

                                         * only valid in multidrop mode (UM0=1)

                                         */

#define RBIT_UART_PREAMBLE (1<<9)       /* send preamble before data */

#define RBIT_UART_CTS_LOST (1<<0)       /* CTS lost */

/*

 * UART event register

 * Section 4.5.11.16

 */

#define M302_UART_EV_CTS   (1<<7)       /* CTS status changed */

#define M302_UART_EV_CD    (1<<6)       /* carrier detect status changed */

#define M302_UART_EV_IDL   (1<<5)       /* IDLE sequence status changed */

#define M302_UART_EV_BRK   (1<<4)       /* break character was received */

#define M302_UART_EV_CCR   (1<<3)       /* control character received */

#define M302_UART_EV_TX    (1<<1)       /* buffer has been transmitted */

#define M302_UART_EV_RX    (1<<0)       /* buffer has been received */

/*

 * HDLC-Specific SCC Parameter RAM

 * Section 4.5.12.3

 *

 * c_mask_l should be 0xF0B8 for 16-bit CRC, 0xdebb for 32-bit CRC

 * c_mask_h is a don't care  for 16-bit CRC, 0x20E2 for 32-bit CRC

 */

typedef struct {

    rtems_unsigned16    rcrc_l;         /* Temp Receive CRC Low */

    rtems_unsigned16    rcrc_h;         /* Temp Receive CRC High */

    rtems_unsigned16    c_mask_l;       /* CRC Mask Low */

    rtems_unsigned16    c_mask_h;       /* CRC Mask High */

    rtems_unsigned16    tcrc_l;         /* Temp Transmit CRC Low */

    rtems_unsigned16    tcrc_h;         /* Temp Transmit CRC High */

    rtems_unsigned16    disfc;          /* Discard Frame Counter */

    rtems_unsigned16    crcec;          /* CRC Error Counter */

    rtems_unsigned16    abtsc;          /* Abort Sequence Counter */

    rtems_unsigned16    nmarc;          /* Nonmatching Address Received Cntr */

    rtems_unsigned16    retrc;          /* Frame Retransmission Counter */

    rtems_unsigned16    mflr;           /* Maximum Frame Length Register */

    rtems_unsigned16    max_cnt;        /* Maximum_Length Counter */

    rtems_unsigned16    hmask;          /* User Defined Frame Address Mask */

    rtems_unsigned16    haddr1;         /* User Defined Frame Address */

    rtems_unsigned16    haddr2;         /* " */

    rtems_unsigned16    haddr3;         /* " */

    rtems_unsigned16    haddr4;         /* " */

} m302_SCC_HdlcSpecific_t;

/*

 * HDLC receiver buffer descriptor bit definitions

 * Section 4.5.12.10

 */

#define RBIT_HDLC_EMPTY_BIT  0x8000     /* buffer associated with BD is empty */

#define RBIT_HDLC_LAST_BIT   0x0800     /* buffer is last in a frame */

#define RBIT_HDLC_FIRST_BIT  0x0400     /* buffer is first in a frame */

#define RBIT_HDLC_FRAME_LEN  0x0020     /* receiver frame length violation */

#define RBIT_HDLC_NONOCT_Rx  0x0010     /* received non-octet aligned frame */

#define RBIT_HDLC_ABORT_SEQ  0x0008     /* received abort sequence */

#define RBIT_HDLC_CRC_ERROR  0x0004     /* frame contains a CRC error */

#define RBIT_HDLC_OVERRUN    0x0002     /* receiver overrun occurred */

#define RBIT_HDLC_CD_LOST    0x0001     /* carrier detect lost */

/*

 * HDLC transmit buffer descriptor bit definitions

 * Section 4.5.12.11

 */

#define RBIT_HDLC_READY_BIT  0x8000     /* buffer is ready to transmit */

#define RBIT_HDLC_EXT_BUFFER 0x4000     /* buffer is in external memory */

#define RBIT_HDLC_WRAP_BIT   0x2000     /* last buffer in bd table, so wrap */

#define RBIT_HDLC_WAKE_UP    0x1000     /* interrupt when buffer serviced */

#define RBIT_HDLC_LAST_BIT   0x0800     /* buffer is last in the frame */

#define RBIT_HDLC_TxCRC_BIT  0x0400     /* transmit a CRC sequence */

#define RBIT_HDLC_UNDERRUN   0x0002     /* transmitter underrun */

#define RBIT_HDLC_CTS_LOST   0x0001     /* CTS lost */

/*

 * HDLC event register bit definitions

 * Section 4.5.12.12

 */

#define RBIT_HDLC_CTS   0x80            /* CTS status changed */

#define RBIT_HDLC_CD    0x40            /* carrier detect status changed */

#define RBIT_HDLC_IDL   0x20            /* IDLE sequence status changed */

#define RBIT_HDLC_TXE   0x10            /* transmit error */

#define RBIT_HDLC_RXF   0x08            /* received frame */

#define RBIT_HDLC_BSY  0x04             /* frame rcvd and discarded due to

                                         * lack of buffers

                                         */

#define RBIT_HDLC_TXB    0x02           /* buffer has been transmitted */

#define RBIT_HDLC_RXB    0x01           /* received buffer */

typedef struct {

    m302_SCC_bd_table_t          bd;    /* +000 Buffer Descriptor Table */

    m302_SCC_parameters_t        parm;  /* +080 Common Parameter RAM */

    union {                             /* +09C Protocol-Specific Parm RAM */

        m302_SCC_UartSpecific_t  uart;

        m302_SCC_HdlcSpecific_t  hdlc;

    } prot;

    rtems_unsigned8        res[0x040];  /* +0C0 reserved, (not implemented) */

} m302_SCC_t;

/*

 * Common SCC Registers

 */

typedef struct {

    rtems_unsigned16    res1;

    rtems_unsigned16    scon;   /* SCC Configuration Register        4.5.2 */

    rtems_unsigned16    scm;    /* SCC Mode Register                 4.5.3 */

    rtems_unsigned16    dsr;    /* SCC Data Synchronization Register 4.5.4 */

    rtems_unsigned8     scce;   /* SCC Event Register  4.5.8.1 */

    rtems_unsigned8     res2;

    rtems_unsigned8     sccm;   /* SCC Mask Register   4.5.8.2 */

    rtems_unsigned8     res3;

    rtems_unsigned8     sccs;   /* SCC Status Register 4.5.8.3 */

    rtems_unsigned8     res4;

    rtems_unsigned16    res5;

} m302_SCC_Registers_t;

/*

 * SCON - SCC Configuration Register

 * Section 4.5.2

 */

#define RBIT_SCON_WOMS  (1<<15)         /* Wired-OR Mode Select (NMSI mode only)

                                         * When set, the TXD driver is an

                                         * open-drain output */

#define RBIT_SCON_EXTC  (1<<14)         /* External Clock Source */

#define RBIT_SCON_TCS   (1<<13)         /* Transmit Clock Source */

#define RBIT_SCON_RCS   (1<<12)         /* Receive Clock Source */

/*

 * SCM - SCC Mode Register bit definitions

 * Section 4.5.3

 * The parameter-specific mode bits occupy bits 15 through 6.

 */

#define RBIT_SCM_ENR    (1<<3)          /* Enable receiver */

#define RBIT_SCM_ENT    (1<<2)          /* Enable transmitter */

/*

 * Internal MC68302 Registers

 * starts at offset 0x800 from dual-port RAM base

 * Section 2.8

 */

typedef struct {

    /* offset +800 */

    rtems_unsigned16    res0;

    rtems_unsigned16    cmr;            /* IDMA Channel Mode Register */

    rtems_unsigned32    sapr;           /* IDMA Source Address Pointer */

    rtems_unsigned32    dapr;           /* IDMA Destination Address Pointer */

    rtems_unsigned16    bcr;            /* IDMA Byte Count Register */

    rtems_unsigned8     csr;            /* IDMA Channel Status Register */

    rtems_unsigned8     res1;

    rtems_unsigned8     fcr;            /* IDMA Function Code Register */

    rtems_unsigned8     res2;

    /* offset +812 */

    rtems_unsigned16    gimr;           /* Global Interrupt Mode Register */

    rtems_unsigned16    ipr;            /* Interrupt Pending Register */

    rtems_unsigned16    imr;            /* Interrupt Mask Register */

    rtems_unsigned16    isr;            /* Interrupt In-Service Register */

    rtems_unsigned16    res3;

    rtems_unsigned16    res4;

    /* offset +81e */

    rtems_unsigned16    pacnt;          /* Port A Control Register */

    rtems_unsigned16    paddr;          /* Port A Data Direction Register */

    rtems_unsigned16    padat;          /* Port A Data Register */

    rtems_unsigned16    pbcnt;          /* Port B Control Register */

    rtems_unsigned16    pbddr;          /* Port B Data Direction Register */

    rtems_unsigned16    pbdat;          /* Port B Data Register */

    rtems_unsigned16    res5;

    /* offset +82c */

    rtems_unsigned16    res6;

    rtems_unsigned16    res7;

    rtems_unsigned16    br0;            /* Base Register   (CS0) */

    rtems_unsigned16    or0;            /* Option Register (CS0) */

    rtems_unsigned16    br1;            /* Base Register   (CS1) */

    rtems_unsigned16    or1;            /* Option Register (CS1) */

    rtems_unsigned16    br2;            /* Base Register   (CS2) */

    rtems_unsigned16    or2;            /* Option Register (CS2) */

    rtems_unsigned16    br3;            /* Base Register   (CS3) */

    rtems_unsigned16    or3;            /* Option Register (CS3) */

    /* offset +840 */

    rtems_unsigned16    tmr1;           /* Timer Unit 1 Mode Register */

    rtems_unsigned16    trr1;           /* Timer Unit 1 Reference Register */

    rtems_unsigned16    tcr1;           /* Timer Unit 1 Capture Register */

    rtems_unsigned16    tcn1;           /* Timer Unit 1 Counter */

    rtems_unsigned8     res8;

    rtems_unsigned8     ter1;           /* Timer Unit 1 Event Register */

    rtems_unsigned16    wrr;            /* Watchdog Reference Register */

    rtems_unsigned16    wcn;            /* Watchdog Counter */

    rtems_unsigned16    res9;

    rtems_unsigned16    tmr2;           /* Timer Unit 2 Mode Register */

    rtems_unsigned16    trr2;           /* Timer Unit 2 Reference Register */

    rtems_unsigned16    tcr2;           /* Timer Unit 2 Capture Register */

    rtems_unsigned16    tcn2;           /* Timer Unit 2 Counter */

    rtems_unsigned8     resa;

    rtems_unsigned8     ter2;           /* Timer Unit 2 Event Register */

    rtems_unsigned16    resb;

    rtems_unsigned16    resc;

    rtems_unsigned16    resd;

    /* offset +860 */

    rtems_unsigned8     cr;             /* Command Register */

    rtems_unsigned8     rese[0x1f];

    /* offset +880, +890, +8a0 */

    m302_SCC_Registers_t scc[3];        /* SCC1, SCC2, SCC3 Registers */

    /* offset +8b0 */

    rtems_unsigned16    spmode;         /* SCP,SMC Mode and Clock Cntrl Reg */

    rtems_unsigned16    simask;         /* Serial Interface Mask Register */

    rtems_unsigned16    simode;         /* Serial Interface Mode Register */

} m302_internalReg_t ;

/*

 * MC68302 dual-port RAM structure.

 * (Includes System RAM, Parameter RAM, and Internal Registers).

 * Section 2.8

 */

typedef struct {

    rtems_unsigned8     mem[0x240];     /* +000 User Data Memory */

    rtems_unsigned8     res1[0x1c0];    /* +240 reserved, (not implemented) */

    m302_SCC_t          scc1;           /* +400 SCC1 */

    m302_SCC_t          scc2;           /* +500 SCC2 */

    m302_SCC_t          scc3;           /* +600 SCC3 */

    rtems_unsigned8     res2[0x100];    /* +700 reserved, (not implemented) */

    m302_internalReg_t  reg;            /* +800 68302 Internal Registers */

} m302_dualPortRAM_t;

/* some useful defines the some of the registers above */

/* ----

   MC68302 Chip Select Registers

      p3-46 2nd Edition

 */

#define BR_ENABLED     1

#define BR_DISABLED    0

#define BR_FC_NULL     0

#define BR_READ_ONLY   0

#define BR_READ_WRITE  2

#define OR_DTACK_0     0x0000

#define OR_DTACK_1     0x2000

#define OR_DTACK_2     0x4000

#define OR_DTACK_3     0x6000

#define OR_DTACK_4     0x8000

#define OR_DTACK_5     0xA000

#define OR_DTACK_6     0xC000

#define OR_DTACK_EXT   0xE000

#define OR_SIZE_64K    0x1FE0

#define OR_SIZE_128K   0x1FC0

#define OR_SIZE_256K   0x1F80

#define OR_SIZE_512K   0x1F00

#define OR_SIZE_1M     0x1E00

#define OR_SIZE_2M     0x1C00

#define OR_MASK_RW     0x0000

#define OR_NO_MASK_RW  0x0002

#define OR_MASK_FC     0x0000

#define OR_NO_MASK_FC  0x0001

#define MAKE_BR(base_address, enable, rw, fc) \

    ((base_address >> 11) | fc | rw | enable)

#define MAKE_OR(bsize, DtAck, RW_Mask, FC_Mask) \

    (DtAck | ((~(bsize - 1) & 0x00FFFFFF) >> 11) | FC_Mask | RW_Mask)

#define __REG_CAT(r, n) r ## n

#define WRITE_BR(csel, base_address, enable, rw, fc) \

          __REG_CAT(m302.reg.br, csel) = MAKE_BR(base_address, enable, rw, fc)

#define WRITE_OR(csel, bsize, DtAck, RW_Mask, FC_Mask) \

          __REG_CAT(m302.reg.or, csel) = MAKE_OR(bsize, DtAck, RW_Mask, FC_Mask)

/* ----

   MC68302 Watchdog Timer Enable Bit

 */

#define WATCHDOG_ENABLE    (1)

#define WATCHDOG_TRIGGER() (m302.reg.wrr = 0x10 | WATCHDOG_ENABLE, m302.reg.wcn = 0)

#define WATCHDOG_TOGGLE()  (m302.reg.wcn = WATCHDOG_TIMEOUT_PERIOD)

#define DISABLE_WATCHDOG() (m302.reg.wrr = 0)

/*

 * Declare the variable that's used to reference the variables in

 * the dual-port RAM.

 */

extern volatile m302_dualPortRAM_t m302;

#endif

/* end of include file */