OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [exec/] [score/] [cpu/] [m68k/] [sim.h] - Blame information for rev 593

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 30 unneback
/*
2
 *-------------------------------------------------------------------
3
 *
4
 *   SIM -- System Integration Module
5
 *
6
 * The system integration module (SIM) is used on many Motorola 16-
7
 * and 32-bit MCUs for the following functions:
8
 *
9
 *  () System configuration and protection. Bus and software watchdog
10
 *  monitors are provided in addition to periodic interrupt generators.
11
 *
12
 *  () Clock signal generation for other intermodule bus (IMB) members
13
 *  and external devices.
14
 *
15
 *  () The generation of chip-select signals that simplify external
16
 *  circuitry interface.
17
 *
18
 *  () Data ports that are available for general purpose input and
19
 *  output.
20
 *
21
 *  () A system test block that is intended only for factory tests.
22
 *
23
 * For more information, refer to Motorola's "Modular Microcontroller
24
 * Family System Integration Module Reference Manual" (Motorola document
25
 * SIMRM/AD).
26
 *
27
 * This file has been created by John S. Gwynne for support of
28
 * Motorola's 68332 MCU in the efi332 project.
29
 *
30
 * Redistribution and use in source and binary forms are permitted
31
 * provided that the following conditions are met:
32
 * 1. Redistribution of source code and documentation must retain
33
 *    the above authorship, this list of conditions and the
34
 *    following disclaimer.
35
 * 2. The name of the author may not be used to endorse or promote
36
 *    products derived from this software without specific prior
37
 *    written permission.
38
 *
39
 * This software is provided "AS IS" without warranty of any kind,
40
 * either expressed or implied, including, but not limited to, the
41
 * implied warranties of merchantability, title and fitness for a
42
 * particular purpose.
43
 *
44
 *------------------------------------------------------------------
45
 *
46
 *  $Id: sim.h,v 1.2 2001-09-27 11:59:28 chris Exp $
47
 */
48
 
49
#ifndef _SIM_H_
50
#define _SIM_H_
51
 
52
 
53
/* SAM-- shift and mask */
54
#undef  SAM
55
#define SAM(a,b,c) ((a << b) & c)
56
 
57
/*
58
 *  These macros make this file usable from assembly.
59
 */
60
 
61
#ifdef ASM
62
#define SIM_VOLATILE_USHORT_POINTER
63
#define SIM_VOLATILE_UCHAR_POINTER
64
#else
65
#define SIM_VOLATILE_USHORT_POINTER (volatile unsigned short int * const)
66
#define SIM_VOLATILE_UCHAR_POINTER  (volatile unsigned char * const)
67
#endif
68
 
69
/* SIM_CRB (SIM Control Register Block) base address of the SIM
70
   control registers */
71
/* not included in ram_init.h */
72
#if SIM_MM == 0
73
#define SIM_CRB 0x7ffa00
74
#else
75
#undef SIM_MM
76
#define SIM_MM 1
77
#define SIM_CRB 0xfffa00
78
#endif 
79
/* end not included in ram_init.h */
80
 
81
 
82
 
83
#define SIMCR SIM_VOLATILE_USHORT_POINTER(0x00 + SIM_CRB)
84
                                /* Module Configuration Register */
85
#define    EXOFF 0x8000         /*    External Clock Off */
86
#define    FRZSW 0x4000         /*    Freeze Software Enable */
87
#define    FRZBM 0x2000         /*    Freeze Bus Monitor Enable */
88
#define    SLVEN 0x0800         /*    Factory Test Model Enabled (ro)*/
89
#define    SHEN  0x0300         /*    Show Cycle Enable */
90
#define    SUPV  0x0080         /*    Supervisor/Unrestricted Data Space */
91
#define    MM    0x0040         /*    Module Mapping */
92
#define    IARB  0x000f         /*    Interrupt Arbitration Field */
93
 
94
 
95
 
96
#define SIMTR SIM_VOLATILE_USHORT_POINTER(0x02 + SIM_CRB)
97
                                /* SIM Test Register */
98
/* Used only for factor testing */
99
 
100
 
101
 
102
#define SYNCR SIM_VOLATILE_USHORT_POINTER(0x04 + SIM_CRB)
103
                                /* Clock Synthesizer Control Register */
104
#define    VCO      0x8000      /*    Frequency Control (VCO) */
105
#define    PRESCALE 0x4000      /*    Frequency Control Bit (Prescale) */
106
#define    COUNTER  0x3f00      /*    Frequency Control Counter */
107
#define    EDIV     0x0080      /*    ECLK Divide Rate */
108
#define    SLIMP    0x0010      /*    Limp Mode Status */
109
#define    SLOCK    0x0008      /*    Synthesizer Lock */
110
#define    RSTEN    0x0004      /*    Reset Enable */
111
#define    STSIM    0x0002      /*    Stop Mode SIM Clock */
112
#define    STEXT    0x0001      /*    Stop Mode External Clock */
113
 
114
 
115
 
116
#define RSR SIM_VOLATILE_UCHAR_POINTER(0x07 + SIM_CRB)
117
                                /* Reset Status Register */
118
#define    EXT   0x0080         /*    External Reset */
119
#define    POW   0x0040         /*    Power-On Reset */
120
#define    SW    0x0020         /*    Software Watchdog Reset */
121
#define    DBF   0x0010         /*    Double Bus Fault Reset */
122
#define    LOC   0x0004         /*    Loss of Clock Reset */
123
#define    SYS   0x0002         /*    System Reset */
124
#define    TST   0x0001         /*    Test Submodule Reset */
125
 
126
 
127
 
128
#define SIMTRE SIM_VOLATILE_USHORT_POINTER(0x08 + SIM_CRB)
129
                                /* System Integration Test Register */
130
/* Used only for factor testing */
131
 
132
 
133
 
134
#define PORTE0 SIM_VOLATILE_UCHAR_POINTER(0x11 + SIM_CRB)
135
#define PORTE1 SIM_VOLATILE_UCHAR_POINTER(0x13 + SIM_CRB)
136
                                /* Port E Data Register */
137
#define DDRE SIM_VOLATILE_UCHAR_POINTER(0x15 + SIM_CRB)
138
                                /* Port E Data Direction Register */
139
#define PEPAR SIM_VOLATILE_UCHAR_POINTER(0x17 + SIM_CRB)
140
                                /* Port E Pin Assignment Register */
141
/* Any bit cleared (zero) defines the corresponding pin to be an I/O
142
   pin. Any bit set defines the corresponding pin to be a bus control
143
   signal. */
144
 
145
 
146
 
147
#define PORTF0 SIM_VOLATILE_UCHAR_POINTER(0x19 + SIM_CRB)
148
#define PORTF1 SIM_VOLATILE_UCHAR_POINTER(0x1b + SIM_CRB)
149
                                /* Port F Data Register */
150
#define DDRF SIM_VOLATILE_UCHAR_POINTER(0x1d + SIM_CRB)
151
                                /* Port E Data Direction Register */
152
#define PFPAR SIM_VOLATILE_UCHAR_POINTER(0x1f + SIM_CRB)
153
/* Any bit cleared (zero) defines the corresponding pin to be an I/O
154
   pin. Any bit set defines the corresponding pin to be a bus control
155
   signal. */
156
 
157
 
158
 
159
#define SYPCR SIM_VOLATILE_UCHAR_POINTER(0x21 + SIM_CRB)
160
/* !!! can write to only once after reset !!! */
161
                                /* System Protection Control Register */
162
#define    SWE   0x80           /*    Software Watch Enable */
163
#define    SWP   0x40           /*    Software Watchdog Prescale */
164
#define    SWT   0x30           /*    Software Watchdog Timing */
165
#define    HME   0x08           /*    Halt Monitor Enable */
166
#define    BME   0x04           /*    Bus Monitor External Enable */
167
#define    BMT   0x03           /*    Bus Monitor Timing */
168
 
169
 
170
 
171
#define PICR SIM_VOLATILE_USHORT_POINTER(0x22 + SIM_CRB)
172
                                /* Periodic Interrupt Control Reg. */
173
#define    PIRQL 0x0700         /*    Periodic Interrupt Request Level */
174
#define    PIV   0x00ff         /*    Periodic Interrupt Level */
175
 
176
 
177
 
178
#define PITR SIM_VOLATILE_USHORT_POINTER(0x24 + SIM_CRB)
179
                                /* Periodic Interrupt Timer Register */
180
#define    PTP   0x0100         /*    Periodic Timer Prescaler Control */
181
#define    PITM  0x00ff         /*    Periodic Interrupt Timing Modulus */
182
 
183
 
184
 
185
#define SWSR SIM_VOLATILE_UCHAR_POINTER(0x27 + SIM_CRB)
186
                                /* Software Service Register */
187
/* write 0x55 then 0xaa to service the software watchdog */
188
 
189
 
190
 
191
#define TSTMSRA SIM_VOLATILE_USHORT_POINTER(0x30 + SIM_CRB)
192
                                /* Test Module Master Shift A */
193
#define TSTMSRB SIM_VOLATILE_USHORT_POINTER(0x32 + SIM_CRB)
194
                                /* Test Module Master Shift A */
195
#define TSTSC SIM_VOLATILE_USHORT_POINTER(0x34 + SIM_CRB)
196
                                /* Test Module Shift Count */
197
#define TSTRC SIM_VOLATILE_USHORT_POINTER(0x36 + SIM_CRB)
198
                                /* Test Module Repetition Counter */
199
#define CREG SIM_VOLATILE_USHORT_POINTER(0x38 + SIM_CRB)
200
                                /* Test Module Control */
201
#define DREG SIM_VOLATILE_USHORT_POINTER(0x3a + SIM_CRB)
202
                                /* Test Module Distributed */
203
/* Used only for factor testing */
204
 
205
 
206
 
207
#define PORTC SIM_VOLATILE_UCHAR_POINTER(0x41 + SIM_CRB)
208
                                /* Port C Data */
209
 
210
 
211
 
212
#define CSPAR0 SIM_VOLATILE_USHORT_POINTER(0x44 + SIM_CRB)
213
                                /* Chip Select Pin Assignment
214
                                   Resgister 0 */
215
/* CSPAR0 contains seven two-bit fields that determine the functions
216
   of corresponding chip-select pins. CSPAR0[15:14] are not
217
   used. These bits always read zero; write have no effect. CSPAR0 bit
218
   1 always reads one; writes to CSPAR0 bit 1 have no effect. */
219
#define CSPAR1 SIM_VOLATILE_USHORT_POINTER(0x46 + SIM_CRB)
220
                                /* Chip Select Pin Assignment
221
                                   Register 1 */
222
/* CSPAR1 contains five two-bit fields that determine the finctions of
223
   corresponding chip-select pins. CSPAR1[15:10] are not used. These
224
   bits always read zero; writes have no effect. */
225
/*
226
 *
227
 *                      Bit Field  |  Description
228
 *                     ------------+---------------
229
 *                         00      | Discrete Output
230
 *                         01      | Alternate Function
231
 *                         10      | Chip Select (8-bit port)
232
 *                         11      | Chip Select (16-bit port)
233
 */
234
#define DisOut 0x0
235
#define AltFun 0x1
236
#define CS8bit 0x2
237
#define CS16bit 0x3
238
/*
239
 *
240
 * CSPARx Field    |Chip Select Signal  |  Alternate Signal  |  Discrete Output
241
 *-----------------+--------------------+--------------------+---------------*/
242
#define CS_5    12 /*     !CS5          |         FC2        |       PC2     */
243
#define CS_4    10 /*     !CS4          |         FC1        |       PC1     */
244
#define CS_3     8 /*     !CS3          |         FC0        |       PC0     */
245
#define CS_2     6 /*     !CS2          |       !BGACK       |               */
246
#define CS_1     4 /*     !CS1          |         !BG        |               */
247
#define CS_0     2 /*     !CS0          |         !BR        |               */
248
#define CSBOOT   0 /*     !CSBOOT       |                    |               */
249
/*                 |                    |                    |               */
250
#define CS_10    8 /*     !CS10         |       ADDR23       |      ECLK     */
251
#define CS_9     6 /*     !CS9          |       ADDR22       |       PC6     */
252
#define CS_8     4 /*     !CS8          |       ADDR21       |       PC5     */
253
#define CS_7     2 /*     !CS7          |       ADDR20       |       PC4     */
254
#define CS_6     0 /*     !CS6          |       ADDR19       |       PC3     */
255
 
256
#define BS_2K 0x0
257
#define BS_8K 0x1
258
#define BS_16K 0x2
259
#define BS_64K 0x3
260
#define BS_128K 0x4
261
#define BS_256K 0x5
262
#define BS_512K 0x6
263
#define BS_1M 0x7
264
 
265
#define CSBARBT SIM_VOLATILE_USHORT_POINTER(0x48 + SIM_CRB)
266
#define CSBAR0 SIM_VOLATILE_USHORT_POINTER(0x4c + SIM_CRB)
267
#define CSBAR1 SIM_VOLATILE_USHORT_POINTER(0x50 + SIM_CRB)
268
#define CSBAR2 SIM_VOLATILE_USHORT_POINTER(0x54 + SIM_CRB)
269
#define CSBAR3 SIM_VOLATILE_USHORT_POINTER(0x58 + SIM_CRB)
270
#define CSBAR4 SIM_VOLATILE_USHORT_POINTER(0x5c + SIM_CRB)
271
#define CSBAR5 SIM_VOLATILE_USHORT_POINTER(0x60 + SIM_CRB)
272
#define CSBAR6 SIM_VOLATILE_USHORT_POINTER(0x64 + SIM_CRB)
273
#define CSBAR7 SIM_VOLATILE_USHORT_POINTER(0x68 + SIM_CRB)
274
#define CSBAR8 SIM_VOLATILE_USHORT_POINTER(0x6c + SIM_CRB)
275
#define CSBAR9 SIM_VOLATILE_USHORT_POINTER(0x70 + SIM_CRB)
276
#define CSBAR10 SIM_VOLATILE_USHORT_POINTER(0x74 + SIM_CRB)
277
 
278
#define MODE 0x8000
279
#define Disable 0
280
#define LowerByte 0x2000
281
#define UpperByte 0x4000
282
#define BothBytes 0x6000
283
#define ReadOnly 0x0800
284
#define WriteOnly 0x1000
285
#define ReadWrite 0x1800
286
#define SyncAS 0x0
287
#define SyncDS 0x0400
288
 
289
#define WaitStates_0 (0x0 << 6)
290
#define WaitStates_1 (0x1 << 6)
291
#define WaitStates_2 (0x2 << 6)
292
#define WaitStates_3 (0x3 << 6)
293
#define WaitStates_4 (0x4 << 6)
294
#define WaitStates_5 (0x5 << 6)
295
#define WaitStates_6 (0x6 << 6)
296
#define WaitStates_7 (0x7 << 6)
297
#define WaitStates_8 (0x8 << 6)
298
#define WaitStates_9 (0x9 << 6)
299
#define WaitStates_10 (0xa << 6)
300
#define WaitStates_11 (0xb << 6)
301
#define WaitStates_12 (0xc << 6)
302
#define WaitStates_13 (0xd << 6)
303
#define FastTerm (0xe << 6)
304
#define External (0xf << 6)
305
 
306
#define CPUSpace (0x0 << 4)
307
#define UserSpace (0x1 << 4)
308
#define SupSpace (0x2 << 4)
309
#define UserSupSpace (0x3 << 4)
310
 
311
#define IPLevel_any 0x0
312
#define IPLevel_1 0x2
313
#define IPLevel_2 0x4
314
#define IPLevel_3 0x6
315
#define IPLevel_4 0x8
316
#define IPLevel_5 0xa
317
#define IPLevel_6 0xc
318
#define IPLevel_7 0xe
319
 
320
#define AVEC 1
321
 
322
#define CSORBT SIM_VOLATILE_USHORT_POINTER(0x4a + SIM_CRB)
323
#define CSOR0 SIM_VOLATILE_USHORT_POINTER(0x4e + SIM_CRB)
324
#define CSOR1 SIM_VOLATILE_USHORT_POINTER(0x52 + SIM_CRB)
325
#define CSOR2 SIM_VOLATILE_USHORT_POINTER(0x56 + SIM_CRB)
326
#define CSOR3 SIM_VOLATILE_USHORT_POINTER(0x5a + SIM_CRB)
327
#define CSOR4 SIM_VOLATILE_USHORT_POINTER(0x5e + SIM_CRB)
328
#define CSOR5 SIM_VOLATILE_USHORT_POINTER(0x62 + SIM_CRB)
329
#define CSOR6 SIM_VOLATILE_USHORT_POINTER(0x66 + SIM_CRB)
330
#define CSOR7 SIM_VOLATILE_USHORT_POINTER(0x6a + SIM_CRB)
331
#define CSOR8 SIM_VOLATILE_USHORT_POINTER(0x6e + SIM_CRB)
332
#define CSOR9 SIM_VOLATILE_USHORT_POINTER(0x72 + SIM_CRB)
333
#define CSOR10 SIM_VOLATILE_USHORT_POINTER(0x76 + SIM_CRB)
334
 
335
#endif /* _SIM_h_ */

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.