Subversion Repositories openrisc_me

/*  set_vector

 *

 *  This routine installs an interrupt vector on the HP PA-RISC simulator.

 *

 *  INPUT:

 *    handler - interrupt handler entry point

 *    vector  - vector number

 *    type    - 0 indicates raw hardware connect

 *              1 indicates RTEMS interrupt connect

 *

 *  NOTE 'type' is ignored on hppa; all interrupts are owned by RTEMS

 *

 *  RETURNS:

 *    address of previous interrupt handler

 *

 *  COPYRIGHT (c) 1989-1999.

 *  On-Line Applications Research Corporation (OAR).

 *

 *  The license and distribution terms for this file may be

 *  found in the file LICENSE in this distribution or at

 *  http://www.OARcorp.com/rtems/license.html.

 *

 *  $Id: setvec.c,v 1.2 2001-09-27 11:59:45 chris Exp $

 */

#include <bsp.h>

/*

 * Install an interrupt handler in the right place

 * given its vector number from cpu/hppa.h

 * There are 2 places an interrupt can be installed

 *      _ISR_Vector_table

 *      bsp interrupt      XXX: nyi

 *

 * We decide which based on the vector number

 */

rtems_isr_entry

set_vector(                                     /* returns old vector */

    rtems_isr_entry     handler,                /* isr routine        */

    rtems_vector_number vector,                 /* vector number      */

    int                 type                    /* RTEMS or RAW intr  */

)

{

    rtems_isr_entry previous_isr;

    /* is it an on chip interrupt? */

    /* XXX this should say CPU_INTERRUPT_NUMBER_OF_VECTORS */

    if (vector < HPPA_INTERRUPT_MAX)

    {

        rtems_interrupt_catch(handler, vector, &previous_isr);

    }

#if 0   /* XXX */

    else if ((vector >= HPPA_INTERRUPT_BSP_BASE) &&

             (vector < (HPPA_INTERRUPT_BSP_BASE + HPPA_BSP_INTERRUPTS)))

    {

        pxfl_interrupt_install(handler,

                               vector - HPPA_INTERRUPT_BSP_BASE,

                               (rtems_isr_entry *) &previous_isr);

    }

#endif

    return previous_isr;

}