URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [i386/] [i386ex/] [include/] [bsp.h] - Blame information for rev 173

Details | Compare with Previous | View Log


/*
 *  This include file definitions related to an Intel i386ex board.
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  $Id: bsp.h,v 1.2 2001-09-27 11:59:46 chris Exp $
 */
 
#ifndef __I386EX_BSP_h
#define __I386EX_BSP_h
 
#ifdef __cplusplus
extern "C" {
#endif
 
#include <rtems.h>
#include <iosupp.h>
#include <console.h>
#include <clockdrv.h>
#include <bspIo.h>
#include <irq.h>
 
/*
 *  confdefs.h overrides for this BSP:
 *   - number of termios serial ports (defaults to 1)
 *   - Interrupt stack space is not minimum if defined.
 */
 
/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
#define CONFIGURE_INTERRUPT_STACK_MEMORY  (8 * 1024)
 
/*
 *  Define the time limits for RTEMS Test Suite test durations.
 *  Long test and short test duration limits are provided.  These
 *  values are in seconds and need to be converted to ticks for the
 *  application.
 *
 */
 
#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
 
/*
 *  Define the interrupt mechanism for Time Test 27
 *
 *  NOTE: Use a software interrupt for the i386.
 */
 
#define MUST_WAIT_FOR_INTERRUTPT 0
 
 
#define Install_tm27_vector(handler) \
{ \
  rtems_isr_entry dummy; \
  rtems_interrupt_catch(handler, 0x90, &dummy); \
}
#define Cause_tm27_intr()              asm volatile( "int $0x90" : : );
 
#define Clear_tm27_intr()
 
#define Lower_tm27_intr()
 
/*
 *  Simple spin delay in microsecond units for device drivers.
 *  This is very dependent on the clock speed of the target.
 */
 
#define delay( _microseconds ) \
  { \
    rtems_unsigned32 _counter; \
    \
    _counter = (_microseconds); \
    \
    asm volatile ( "0: nop;" \
                   " mov %0,%0 ;" \
                   " loop 0b" : "=c" (_counter) \
                              : "0"  (_counter) \
                 ); \
    \
  }
 
/* Constants */
 
#define RAM_START 0
 
/* replaced the earlier EI kludge of 0xfffff */
 
#define RAM_END   0x100000
 
/* I/O addressing */
 
/*
 *#define Is_tx_ready( _status ) ( (_status) & 0x20 )
 */
/* dec 20. try the TE instead of TBE as the check */
 
#define Is_tx_ready( _status ) ( (_status) & 0x40 )
 
 
#define Is_rx_ready( _status ) ( (_status) & 0x01 )
 
/* Structures */
 
#ifdef F386_INIT
#undef BSP_EXTERN
#define BSP_EXTERN
#else
#undef BSP_EXTERN
#define BSP_EXTERN extern
#endif
 
/*
 *  Device Driver Table Entries
 */
 
/*
 * NOTE: Use the standard Console driver entry
 */
 
/*
 * NOTE: Use the standard Clock driver entry
 */
 
/* miscellaneous stuff assumed to exist */
 
extern rtems_configuration_table BSP_Configuration;
 
#define IDT_SIZE 256
#define GDT_SIZE 8192
 
extern interrupt_gate_descriptor Interrupt_descriptor_table[IDT_SIZE];
extern segment_descriptors Global_descriptor_table   [GDT_SIZE];
 
BSP_EXTERN unsigned short Idt[3];  /* Interrupt Descriptor Table Address */
BSP_EXTERN unsigned short Gdt[3];  /* Global Descriptor Table Address */
BSP_EXTERN unsigned int   Idt_base;
BSP_EXTERN unsigned int   Gdt_base;
 
/* routines */
 
#ifdef __cplusplus
}
#endif
 
#endif
/* end of include file */

Line No.	Rev	Author	Line
1	30	unneback	`/*`
2			`* This include file definitions related to an Intel i386ex board.`
3			`*`
4			`* COPYRIGHT (c) 1989-1999.`
5			`* On-Line Applications Research Corporation (OAR).`
6			`*`
7			`* The license and distribution terms for this file may be`
8			`* found in the file LICENSE in this distribution or at`
9			`* http://www.OARcorp.com/rtems/license.html.`
10			`*`
11			`* $Id: bsp.h,v 1.2 2001-09-27 11:59:46 chris Exp $`
12			`*/`
13
14			`#ifndef __I386EX_BSP_h`
15			`#define __I386EX_BSP_h`
16
17			`#ifdef __cplusplus`
18			`extern "C" {`
19			`#endif`
20
21			`#include <rtems.h>`
22			`#include <iosupp.h>`
23			`#include <console.h>`
24			`#include <clockdrv.h>`
25			`#include <bspIo.h>`
26			`#include <irq.h>`
27
28			`/*`
29			`* confdefs.h overrides for this BSP:`
30			`* - number of termios serial ports (defaults to 1)`
31			`* - Interrupt stack space is not minimum if defined.`
32			`*/`
33
34			`/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */`
35			`#define CONFIGURE_INTERRUPT_STACK_MEMORY (8 * 1024)`
36
37			`/*`
38			`* Define the time limits for RTEMS Test Suite test durations.`
39			`* Long test and short test duration limits are provided. These`
40			`* values are in seconds and need to be converted to ticks for the`
41			`* application.`
42			`*`
43			`*/`
44
45			`#define MAX_LONG_TEST_DURATION 300 /* 5 minutes = 300 seconds */`
46			`#define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */`
47
48			`/*`
49			`* Define the interrupt mechanism for Time Test 27`
50			`*`
51			`* NOTE: Use a software interrupt for the i386.`
52			`*/`
53
54			`#define MUST_WAIT_FOR_INTERRUTPT 0`
55
56
57			`#define Install_tm27_vector(handler) \`
58			`{ \`
59			`rtems_isr_entry dummy; \`
60			`rtems_interrupt_catch(handler, 0x90, &dummy); \`
61			`}`
62			`#define Cause_tm27_intr() asm volatile( "int $0x90" : : );`
63
64			`#define Clear_tm27_intr()`
65
66			`#define Lower_tm27_intr()`
67
68			`/*`
69			`* Simple spin delay in microsecond units for device drivers.`
70			`* This is very dependent on the clock speed of the target.`
71			`*/`
72
73			`#define delay( _microseconds ) \`
74			`{ \`
75			`rtems_unsigned32 _counter; \`
76			`\`
77			`_counter = (_microseconds); \`
78			`\`
79			`asm volatile ( "0: nop;" \`
80			`" mov %0,%0 ;" \`
81			`" loop 0b" : "=c" (_counter) \`
82			`: "0" (_counter) \`
83			`); \`
84			`\`
85			`}`
86
87			`/* Constants */`
88
89			`#define RAM_START 0`
90
91			`/* replaced the earlier EI kludge of 0xfffff */`
92
93			`#define RAM_END 0x100000`
94
95			`/* I/O addressing */`
96
97			`/*`
98			`*#define Is_tx_ready( _status ) ( (_status) & 0x20 )`
99			`*/`
100			`/* dec 20. try the TE instead of TBE as the check */`
101
102			`#define Is_tx_ready( _status ) ( (_status) & 0x40 )`
103
104
105			`#define Is_rx_ready( _status ) ( (_status) & 0x01 )`
106
107			`/* Structures */`
108
109			`#ifdef F386_INIT`
110			`#undef BSP_EXTERN`
111			`#define BSP_EXTERN`
112			`#else`
113			`#undef BSP_EXTERN`
114			`#define BSP_EXTERN extern`
115			`#endif`
116
117			`/*`
118			`* Device Driver Table Entries`
119			`*/`
120
121			`/*`
122			`* NOTE: Use the standard Console driver entry`
123			`*/`
124
125			`/*`
126			`* NOTE: Use the standard Clock driver entry`
127			`*/`
128
129			`/* miscellaneous stuff assumed to exist */`
130
131			`extern rtems_configuration_table BSP_Configuration;`
132
133			`#define IDT_SIZE 256`
134			`#define GDT_SIZE 8192`
135
136			`extern interrupt_gate_descriptor Interrupt_descriptor_table[IDT_SIZE];`
137			`extern segment_descriptors Global_descriptor_table [GDT_SIZE];`
138
139			`BSP_EXTERN unsigned short Idt[3]; /* Interrupt Descriptor Table Address */`
140			`BSP_EXTERN unsigned short Gdt[3]; /* Global Descriptor Table Address */`
141			`BSP_EXTERN unsigned int Idt_base;`
142			`BSP_EXTERN unsigned int Gdt_base;`
143
144			`/* routines */`
145
146			`#ifdef __cplusplus`
147			`}`
148			`#endif`
149
150			`#endif`
151			`/* end of include file */`

Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [i386/] [i386ex/] [include/] [bsp.h] - Blame information for rev 173