URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [i386/] [pc386/] [3c509/] [3c509.c] - Blame information for rev 389

Go to most recent revision | Details | Compare with Previous | View Log

/**********************************************************************************
 * $Header: /home/marcus/revision_ctrl_test/oc_cvs/cvs/or1k/rtems/c/src/lib/libbsp/i386/pc386/3c509/3c509.c,v 1.2 2001-09-27 11:59:47 chris Exp $
 *
 * Ported by Rosimildo da Silva.
 * ConnectTel,Inc.
 * e-mail: rdasilva@connecttel.com
 *
 * MODULE DESCRIPTION:
 * RTEMS driver for 3COM 3C509 Ethernet Card.
 * The driver has been tested on PC with a single network card.
 *
 *
 * This driver was based on the FreeBSD implementation( if_ep.c ) of the 3c5x9
 * family and on the network framework of the RTEMS network driver.
 * ( WD80x3 by  Eric Norum ).
 * See notes below:
 *
 ******************************************************************************
 * Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Herb Peyerl.
 * 4. The name of Herb Peyerl may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *******************************************************************************
 *
 * RTEMS driver for M68360 WD1 Ethernet
 *
 * W. Eric Norum
 * Saskatchewan Accelerator Laboratory
 * University of Saskatchewan
 * Saskatoon, Saskatchewan, CANADA
 * eric@skatter.usask.ca
 *******************************************************************************
 *
 *
 * MODIFICATION/HISTORY:
 * $Log: not supported by cvs2svn $
 * Revision 1.2  1999/12/13 21:21:31  joel
 * Warning removal patch from Philip A. Prindeville <philipp@zembu.com>.
 *
 * Revision 1.1  1999/05/14 16:23:42  joel
 * Added 3COM 3C509 driver from Rosimildo DaSilva <rdasilva@connecttel.com>.
 *
 *
 **********************************************************************************/
 
#include <bsp.h>
 
#include <stdio.h>
#include <stdarg.h>
#include <rtems/error.h>
#include <rtems/rtems_bsdnet.h>
 
#include <sys/param.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/libkern.h>
 
#include <net/if.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
 
#include <irq.h>
 
/* Local includes */
#include "3c509.h"
#include "elink.h"
 
/* #define      ET_MINLEN 60 */         /* minimum message length */
 
/*
 * Number of WDs supported by this driver
 */
#define NWDDRIVER       1
 
/*
 * Default number of buffer descriptors set aside for this driver.
 * The number of transmit buffer descriptors has to be quite large
 * since a single frame often uses four or more buffer descriptors.
 */
/*
#define RX_BUF_COUNT     15
#define TX_BUF_COUNT     4
#define TX_BD_PER_BUF    4
*/
 
/*
 * RTEMS event used by interrupt handler to signal driver tasks.
 * This must not be any of the events used by the network task synchronization.
 */
#define INTERRUPT_EVENT                 RTEMS_EVENT_1
 
/*
 * RTEMS event used to start transmit daemon.
 * This must not be the same as INTERRUPT_EVENT.
 */
#define START_TRANSMIT_EVENT    RTEMS_EVENT_2
 
/*
 * Receive buffer size -- Allow for a full ethernet packet including CRC
 */
 
/*
#define RBUF_SIZE       1520
 
#if (MCLBYTES < RBUF_SIZE)
# error "Driver must have MCLBYTES > RBUF_SIZE"
#endif
*/
 
/* network driver name */
#define NET_DRIVER_NAME         "ep"
 
/*
 * Per device structure.
 *
 * XXX Note:  id_conflicts should either become an array of things we're
 * specifically allowed to conflict with or be subsumed into some
 * more powerful mechanism for detecting and dealing with multiple types
 * of non-fatal conflict.  -jkh XXX
 */
struct isa_device
{
  int   id_id;          /* device id */
  int   id_unit;        /* unit number */
  int   id_iobase;      /* base i/o address */
  u_int id_irq;         /* interrupt request */
};
 
 
struct ep_board
{
  int epb_addr;         /* address of this board */
  char epb_used;                /* was this entry already used for configuring ? */
                                        /* data from EEPROM for later use */
  u_short eth_addr[3];  /* Ethernet address */
  u_short prod_id;              /* product ID */
  u_short res_cfg;              /* resource configuration */
};
 
 
/*
 * Ethernet software status per interface.
 */
struct ep_softc
{
    struct arpcom arpcom;       /* Ethernet common part          */
    int ep_io_addr;                     /* i/o bus address                       */
    struct mbuf *top, *mcur;
    short cur_len;
    u_short ep_connectors;      /* Connectors on this card.      */
    u_char ep_connector;        /* Configured connector.         */
    int stat;                           /* some flags                            */
    struct ep_board *epb;
    int unit;
 
    rtems_irq_connect_data   irqInfo;
    rtems_id                     rxDaemonTid;
    rtems_id                     txDaemonTid;
 
    int                  acceptBroadcast;
 
    short tx_underrun;
    short rx_no_first;
    short rx_no_mbuf;
    short rx_bpf_disc;
    short rx_overrunf;
    short rx_overrunl;
};
 
 
/*  static unsigned long loopc; */
static volatile unsigned long overrun;
static volatile unsigned long resend;
static struct ep_softc ep_softc[ NWDDRIVER ];
static struct isa_device isa_dev[ NWDDRIVER ] =
{
  { 0,                   /* device id                            */
    0,                   /* unit number                          */
    -1,         /* base i/o address   ???       */
 
  }
};
 
static  u_long  ep_unit;
static  int         ep_boards;
struct  ep_board ep_board[ EP_MAX_BOARDS + 1];
static  int ep_current_tag = EP_LAST_TAG + 1;
static  char *ep_conn_type[] = {"UTP", "AUI", "???", "BNC"};
 
#define ep_ftst(f) (sc->stat&(f))
#define ep_fset(f) (sc->stat|=(f))
#define ep_frst(f) (sc->stat&=~(f))
 
 
/* forward declarations for functions */
static int ep_attach( struct ep_softc *sc );
static int ep_isa_probe( struct isa_device *is );
static void epinit(  struct ep_softc *sc );
static void epread( register struct ep_softc *sc );
static void epstart( struct ifnet *ifp );
static void epread( register struct ep_softc *sc );
static int ep_isa_attach( struct isa_device *is );
static int get_eeprom_data( int id_port, int offset );
static void ep_intr( struct ep_softc *sc );
 
/* external functions */
extern void Wait_X_ms( unsigned int timeToWait );  /* timer.c ??? */
 
 
/**********************************************************************************
 *
 * DESCRIPTION: Writes a buffer of data to the I/O port. The data is sent to the
 *                              port as 32 bits units( 4 bytes ).
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static __inline void outsl( unsigned short io_addr, unsigned char *out_data, int len )
{
   u_long *pl = ( u_long *)out_data;
   while( len-- )
   {
     outport_long( io_addr, *pl );
         pl++;
   }
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Writes a buffer of data to the I/O port. The data is sent to the
 *                              port as 16 bits units( 2 bytes ).
 *
 * RETURNS:
 *
 **********************************************************************************/
static __inline void outsw( unsigned short io_addr, unsigned char *out_data, int len )
{
   u_short *ps = ( u_short *)out_data;
   while( len-- )
   {
     outport_word( io_addr, *ps );
         ps++;
   }
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Writes a buffer of data to the I/O port. The data is sent to the
 *                              port as 8 bits units( 1 byte ).
 *
 * RETURNS: nothing
 *
 **********************************************************************************/
static __inline void outsb( unsigned short io_addr, unsigned char *out_data, int len )
{
   while( len-- )
   {
     outport_byte( io_addr, *out_data );
         out_data++;
   }
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION: Read a buffer of data from an I/O port. The data is read as 16 bits
 *                          units or 2 bytes.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static __inline void insw( unsigned short io_addr, unsigned char *in_data, int len )
{
   u_short *ps = ( u_short *)in_data;
   while( len-- )
   {
     inport_word( io_addr, *ps );
         ps++;
   }
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Read a buffer of data from an I/O port. The data is read as 32 bits
 *                          units or 4 bytes.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static __inline void insl( unsigned short io_addr, unsigned char *in_data, int len )
{
   u_long *pl = ( u_long *)in_data;
   while( len-- )
   {
     inport_long( io_addr, *pl );
         pl++;
   }
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Read a buffer of data from an I/O port. The data is read as 8 bits
 *                          units or 1 bytes.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static __inline void insb( unsigned short io_addr, unsigned char *in_data, int len )
{
   while( len-- )
   {
     inport_byte( io_addr, *in_data++ );
   }
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION: Writes a word to the I/O port.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
/*
 * Routine to output a word as defined in FreeBSD.
 */
static __inline void outw( unsigned short io_addr, unsigned short out_data )
{
  outport_word( io_addr, out_data );
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION:  Routine to read a word as defined in FreeBSD.
 *
 * RETURNS: nothing
 *
 **********************************************************************************/
static __inline unsigned short inw( unsigned short io_addr )
{
  unsigned short in_data;
  inport_word( io_addr, in_data );
  return in_data;
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Routine to output a word as defined in FreeBSD.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
void __inline outb( unsigned short io_addr, unsigned char out_data )
{
  outport_byte( io_addr, out_data );
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Routine to read a word as defined in FreeBSD.
 *
 * RETURNS: byte read.
 *
 **********************************************************************************/
static __inline unsigned char inb( unsigned short io_addr )
{
  unsigned char in_data;
  inport_byte( io_addr, in_data );
  return in_data;
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION:
 * We get eeprom data from the id_port given an offset into the eeprom.
 * Basically; after the ID_sequence is sent to all of the cards; they enter
 * the ID_CMD state where they will accept command requests. 0x80-0xbf loads
 * the eeprom data.  We then read the port 16 times and with every read; the
 * cards check for contention (ie: if one card writes a 0 bit and another
 * writes a 1 bit then the host sees a 0. At the end of the cycle; each card
 * compares the data on the bus; if there is a difference then that card goes
 * into ID_WAIT state again). In the meantime; one bit of data is returned in
 * the AX register which is conveniently returned to us by inb().  Hence; we
 * read 16 times getting one bit of data with each read.
 *
 * RETURNS: 16 bit word from the EEPROM
 *
 **********************************************************************************/
static int get_eeprom_data( int id_port, int offset )
{
    int i, data = 0;
    outb(id_port, 0x80 + offset);
    Wait_X_ms( 1 );
    for (i = 0; i < 16; i++)
            data = (data << 1) | (inw(id_port) & 1);
    return( data );
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION: Waits until the EEPROM of the card is ready to be accessed.
 *
 * RETURNS: 0 - not ready; 1 - ok
 *
 **********************************************************************************/
static int eeprom_rdy( struct ep_softc *sc )
{
    int i;
 
    for (i = 0; is_eeprom_busy(BASE) && i < MAX_EEPROMBUSY; i++)
            continue;
    if (i >= MAX_EEPROMBUSY)
    {
           printf("ep%d: eeprom failed to come ready.\n", sc->unit);
           return (0);
    }
    return (1);
}
 
/**********************************************************************************
 *
 * DESCRIPTION:
 * get_e: gets a 16 bits word from the EEPROM.
 * We must have set the window before call this routine.
 *
 * RETURNS: data from EEPROM
 *
 **********************************************************************************/
u_short get_e(  struct ep_softc *sc, int offset )
{
    if( !eeprom_rdy(sc) )
           return (0xffff);
    outw(BASE + EP_W0_EEPROM_COMMAND, EEPROM_CMD_RD | offset );
    if( !eeprom_rdy(sc) )
           return( 0xffff );
    return( inw( BASE + EP_W0_EEPROM_DATA ) );
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION:
 * Driver interrupt handler. This routine is called by the RTEMS kernel when this
 * interrupt is raised.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static rtems_isr ap_interrupt_handler( rtems_vector_number v )
{
  struct ep_softc *sc = (struct ep_softc *)&ep_softc[ 0 ];
 
  /* de-activate any pending interrrupt, and sent and event to interrupt task
   * to process all events required by this interrupt.
   */
  outw( BASE + EP_COMMAND, SET_INTR_MASK );     /* disable all Ints */
  rtems_event_send( sc->rxDaemonTid, INTERRUPT_EVENT );
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION:
 *
 * RETURNS:
 *
 **********************************************************************************/
static void nopOn(const rtems_irq_connect_data* notUsed)
{
  /* does nothing */
}
 
/**********************************************************************************
 *
 * DESCRIPTION:
 *
 * RETURNS:
 *
 **********************************************************************************/
static int _3c509_IsOn(const rtems_irq_connect_data* irq)
{
  return BSP_irq_enabled_at_i8259s (irq->name);
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION:
 * Initializes the ethernet hardware.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static void _3c509_initialize_hardware (struct ep_softc *sc)
{
  rtems_status_code st;
 
  epinit( sc );
 
  /*
   * Set up interrupts
   */
  sc->irqInfo.hdl = ( rtems_irq_hdl )ap_interrupt_handler;
  sc->irqInfo.on  = nopOn;
  sc->irqInfo.off = nopOn;
  sc->irqInfo.isOn = _3c509_IsOn;
 
  printf ("3c509: IRQ with Kernel: %d\n", sc->irqInfo.name );
  st = BSP_install_rtems_irq_handler( &sc->irqInfo );
  if( !st )
  {
    rtems_panic ("Can't attach WD interrupt handler for irq %d\n", sc->irqInfo.name );
  }
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Driver interrupt daemon.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static void _3c509_rxDaemon (void *arg)
{
  struct ep_softc *dp = (struct ep_softc *)&ep_softc[ 0 ];
  rtems_event_set events;
 
  printf ("3C509: RX Daemon is starting.\n");
  for( ;; )
  {
    /* printk( "R-" ); */
    rtems_bsdnet_event_receive( INTERRUPT_EVENT,
                                                 RTEMS_WAIT | RTEMS_EVENT_ANY,
                                                 RTEMS_NO_TIMEOUT,
                                                 &events );
    /* printk( "R+" ); */
    ep_intr( dp );
    epstart( &dp->arpcom.ac_if );
  }
  printf ("3C509: RX Daemon is finishing.\n");
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION: Driver transmit daemon
 *
 * RETURNS:
 *
 **********************************************************************************/
static void _3c509_txDaemon (void *arg)
{
    struct ep_softc *sc = (struct ep_softc *)&ep_softc[0];
        struct ifnet *ifp = &sc->arpcom.ac_if;
        rtems_event_set events;
 
    printf ("3C509: TX Daemon is starting.\n");
    for( ;; )
        {
                /*
                 * Wait for packet
                 */
          /* printk( "T-\n" ); */
                rtems_bsdnet_event_receive( START_TRANSMIT_EVENT,
                                                                        RTEMS_EVENT_ANY | RTEMS_WAIT,
                                                                        RTEMS_NO_TIMEOUT,
                                                                        &events );
                /*      printk( "T+\n" ); */
      epstart( ifp );
      while( ifp->if_flags & IFF_OACTIVE )
          epstart( ifp );
        }
   printf ("3C509: TX Daemon is finishing.\n");
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION: Activates the trabsmitter task...
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static void _3c509_start (struct ifnet *ifp)
{
        struct ep_softc *sc = ifp->if_softc;
        /*    printk ("S");  */
        ifp->if_flags |= IFF_OACTIVE;
        rtems_event_send( sc->txDaemonTid, START_TRANSMIT_EVENT );
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Initialize and start the device
 *
 * RETURNS:
 *
 **********************************************************************************/
static void _3c509_init (void *arg)
{
  struct ep_softc *sc = arg;
  struct ifnet *ifp = &sc->arpcom.ac_if;
 
  printf ("3C509: Initialization called.\n");
  if (sc->txDaemonTid == 0) {
 
    /*
     * Set up WD hardware
     */
    _3c509_initialize_hardware (sc);
    printf ("3C509: starting network driver tasks..\n");
    /*
     * Start driver tasks
     */
    sc->txDaemonTid = rtems_bsdnet_newproc ("APtx", 4096, _3c509_txDaemon, sc);
    sc->rxDaemonTid = rtems_bsdnet_newproc ("APrx", 4096, _3c509_rxDaemon, sc);
  }
 
  /*
   * Tell the world that we're running.
   */
   ifp->if_flags |= IFF_RUNNING;
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Stop the device
 *
 * RETURNS:
 *
 **********************************************************************************/
static void _3c509_stop (struct ep_softc *sc)
{
  struct ifnet *ifp = &sc->arpcom.ac_if;
  ifp->if_flags &= ~IFF_RUNNING;
 
  printf ("3C509: stop() called.\n");
  /*
   * Stop the transmitter
   */
  outw(BASE + EP_COMMAND, RX_DISABLE);
  outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
  while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
  outw(BASE + EP_COMMAND, TX_DISABLE);
  outw(BASE + EP_COMMAND, STOP_TRANSCEIVER);
  outw(BASE + EP_COMMAND, RX_RESET);
  outw(BASE + EP_COMMAND, TX_RESET);
  while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
  outw(BASE + EP_COMMAND, C_INTR_LATCH);
  outw(BASE + EP_COMMAND, SET_RD_0_MASK);
  outw(BASE + EP_COMMAND, SET_INTR_MASK);
  outw(BASE + EP_COMMAND, SET_RX_FILTER);
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION:  Show interface statistics
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static void _3c509_stats (struct ep_softc *sc)
{
  struct ifnet *ifp = &sc->arpcom.ac_if;
  printf ("3C509: stats() called.\n");
  printf("\tStat: %x\n", sc->stat);
  printf("\tIpackets=%ld, Opackets=%ld\n", ifp->if_ipackets, ifp->if_opackets);
  printf("\tNOF=%d, NOMB=%d, BPFD=%d, RXOF=%d, RXOL=%d, TXU=%d\n",
           sc->rx_no_first, sc->rx_no_mbuf, sc->rx_bpf_disc, sc->rx_overrunf,
           sc->rx_overrunl, sc->tx_underrun );
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Driver ioctl handler
 *
 * RETURNS:
 *
 **********************************************************************************/
static int _3c509_ioctl (struct ifnet *ifp, int command, caddr_t data)
{
        struct ep_softc *sc = ifp->if_softc;
        int error = 0;
 
    printf ("3C509: ioctl() called.\n");
        switch (command) {
        case SIOCGIFADDR:
        case SIOCSIFADDR:
                ether_ioctl (ifp, command, data);
                break;
 
        case SIOCSIFFLAGS:
                switch (ifp->if_flags & (IFF_UP | IFF_RUNNING)) {
                case IFF_RUNNING:
                        _3c509_stop (sc);
                        break;
 
                case IFF_UP:
                        _3c509_init (sc);
                        break;
 
                case IFF_UP | IFF_RUNNING:
                        _3c509_stop (sc);
                        _3c509_init (sc);
                        break;
 
                default:
                        break;
                }
                break;
 
        case SIO_RTEMS_SHOW_STATS:
                _3c509_stats( sc );
                break;
 
        /*
         * FIXME: All sorts of multicast commands need to be added here!
         */
        default:
                error = EINVAL;
                break;
        }
        return error;
}
 
/**********************************************************************************
 *
 * DESCRIPTION:
 * Attaches this network driver to the system. This function is called by the network
 * interface during the initialization of the system.
 *
 * RETURNS: - 1 - success; 0 - fail to initialize
 *
 **********************************************************************************/
int rtems_3c509_driver_attach (struct rtems_bsdnet_ifconfig *config )
{
        struct ep_softc *sc;
        struct ifnet *ifp;
        int mtu;
        int i;
 
    printf ("3C509: attach() called.\n");
 
        /*
         * init some variables
         */
        overrun = 0;
        resend = 0;
    ep_unit = 0;
    ep_boards = 0;
 
        /*
         * Find a free driver
         */
        for (i = 0 ; i < NWDDRIVER ; i++) {
                sc = &ep_softc[i];
                ifp = &sc->arpcom.ac_if;
                if (ifp->if_softc == NULL)
                        break;
        }
        if (i >= NWDDRIVER)
        {
                printf ("Too many 3C509 drivers.\n");
                return 0;
        }
 
        /*
         * Process options
         */
        if( config->hardware_address )
        {
          memcpy (sc->arpcom.ac_enaddr, config->hardware_address, ETHER_ADDR_LEN);
        }
        else
        {
          /* set it to something ... */
          memset (sc->arpcom.ac_enaddr, 0x08,ETHER_ADDR_LEN);
        }
        if (config->mtu)
                mtu = config->mtu;
        else
                mtu = ETHERMTU;
 
        if (config->irno)
                sc->irqInfo.name = config->irno;
        else
                sc->irqInfo.name = 10;
 
        if (config->port)
                sc->ep_io_addr = config->port;
        else
                sc->ep_io_addr = 0x300;
 
        sc->acceptBroadcast = !config->ignore_broadcast;
 
    printf ("3C509: isa_probe() looking for a card...\n");
    if( !ep_isa_probe( &isa_dev[ 0 ] ) )
        {
           printf ("3C509: isa_probe() fail to find a board.\n");
           return 0;
        }
 
        /* A board has been found, so proceed with the installation of the driver */
    ep_isa_attach( &isa_dev[ 0 ] );
        /*
         * Set up network interface values
         */
 
        ifp->if_softc = sc;
        ifp->if_unit = i;
        ifp->if_name = NET_DRIVER_NAME;
        ifp->if_mtu = mtu;
        ifp->if_init = _3c509_init;
        ifp->if_ioctl = _3c509_ioctl;
        ifp->if_start = _3c509_start;
        ifp->if_output = ether_output;
    ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
        if( ifp->if_snd.ifq_maxlen == 0 )
        {
           ifp->if_snd.ifq_maxlen = ifqmaxlen;
        }
        /*
         * Attach the interface
         */
        if_attach (ifp);
        ether_ifattach (ifp);
    printf ("3C509: attach() is complete.\n");
        return 1;
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION:
 * This function looks for a 3COM card 3c5x9 in an isa bus. If a board is found, it
 * returns a structure describing the caracteristics of the card. It returns zero when
 * card can not be found.
 *
 * RETURNS:     0 - fail - could not find a card...
 *                              <>  description of the card.
 *
 **********************************************************************************/
static struct ep_board *ep_look_for_board_at( struct isa_device *is )
{
    int data, i, j, id_port = ELINK_ID_PORT;
    int count = 0;
 
    if(ep_current_tag == (EP_LAST_TAG + 1) )
    {
        /* Come here just one time */
                ep_current_tag--;
 
        /* Look for the ISA boards. Init and leave them actived */
                outb(id_port, 0);
                outb(id_port, 0);
 
                elink_idseq(0xCF);
                elink_reset();
      Wait_X_ms( 10 );  /* RPS: assuming delay in miliseconds */
                for (i = 0; i < EP_MAX_BOARDS; i++)
        {
                outb(id_port, 0);
                    outb(id_port, 0);
                    elink_idseq(0xCF);
 
                data = get_eeprom_data(id_port, EEPROM_MFG_ID);
                    if (data != MFG_ID)
                                break;
 
                    /* resolve contention using the Ethernet address */
                    for (j = 0; j < 3; j++)
                        get_eeprom_data(id_port, j);
 
                    /* and save this address for later use */
 
                    for (j = 0; j < 3; j++)
                           ep_board[ep_boards].eth_addr[j] = get_eeprom_data(id_port, j);
 
                    ep_board[ep_boards].res_cfg = get_eeprom_data(id_port, EEPROM_RESOURCE_CFG);
                    ep_board[ep_boards].prod_id = get_eeprom_data(id_port, EEPROM_PROD_ID);
                    ep_board[ep_boards].epb_used = 0;
#ifdef PC98
                    ep_board[ep_boards].epb_addr =
                                (get_eeprom_data(id_port, EEPROM_ADDR_CFG) & 0x1f) * 0x100 + 0x40d0;
#else
                    ep_board[ep_boards].epb_addr =
                                (get_eeprom_data(id_port, EEPROM_ADDR_CFG) & 0x1f) * 0x10 + 0x200;
                    if (ep_board[ep_boards].epb_addr > 0x3E0)
                                /* Board in EISA configuration mode */
                                continue;
#endif /* PC98 */
 
                    outb(id_port, ep_current_tag);      /* tags board */
                    outb(id_port, ACTIVATE_ADAPTER_TO_CONFIG);
                    ep_boards++;
                count++;
                    ep_current_tag--;
                }
                ep_board[ep_boards].epb_addr = 0;
                if( count )
                {
                printf("%d 3C5x9 board(s) on ISA found at", count);
                    for (j = 0; ep_board[j].epb_addr; j++)
                           if( ep_board[j].epb_addr <= 0x3E0 )
                               printf(" 0x%x", ep_board[j].epb_addr );
                    printf("\n");
                }
    }
 
    /* we have two cases:
     *
     *  1. Device was configured with 'port ?'
     *      In this case we search for the first unused card in list
     *
     *  2. Device was configured with 'port xxx'
     *      In this case we search for the unused card with that address
     *
     */
 
    if (IS_BASE == -1)
    { /* port? */
                for (i = 0; ep_board[i].epb_addr && ep_board[i].epb_used; i++) ;
                if (ep_board[i].epb_addr == 0)
                      return 0;
 
                IS_BASE = ep_board[i].epb_addr;
                ep_board[i].epb_used = 1;
                return &ep_board[ i ];
    }
    else
    {
                for (i = 0; ep_board[i].epb_addr && ep_board[i].epb_addr != IS_BASE;  i++ ) ;
                if (ep_board[i].epb_used || ep_board[i].epb_addr != IS_BASE)
                            return 0;
                if (inw(IS_BASE + EP_W0_EEPROM_COMMAND) & EEPROM_TST_MODE)
                {
                printf("ep%d: 3c5x9 at 0x%x in PnP mode. Disable PnP mode!\n",
                                is->id_unit, IS_BASE );
                }
                ep_board[i].epb_used = 1;
                return &ep_board[i];
    }
}
 
 
 
/**********************************************************************************
 *
 * DESCRIPTION:
 * This routine checks if there card installed on the machine.
 *
 * RETURNS: 0 - no card founded.
 *                      16 - size of the IO range for the card.
 *
 **********************************************************************************/
static int ep_isa_probe( struct isa_device *is )
{
    struct ep_softc *sc;
    struct ep_board *epb;
    u_short k;
 
    /* try to find a 3COM 3c5x9 .... */
    if( (epb = ep_look_for_board_at(is)) == 0 )
                return (0);
 
    sc = &ep_softc[ 0 ];
    sc->ep_io_addr = epb->epb_addr;
    sc->epb = epb;
 
    /*
     * The iobase was found and MFG_ID was 0x6d50. PROD_ID should be
     * 0x9[0-f]50       (IBM-PC)
     * 0x9[0-f]5[0-f]   (PC-98)
     */
    GO_WINDOW(0);
    k = sc->epb->prod_id;
#ifdef PC98
    if ((k & 0xf0f0) != (PROD_ID & 0xf0f0))
    {
#else
    if ((k & 0xf0ff) != (PROD_ID & 0xf0ff))
    {
#endif
            printf("ep_isa_probe: ignoring model %04x\n", k );
/*        ep_unit--;  */
        return (0);
    }
    k = sc->epb->res_cfg;
    k >>= 12;
 
    /* Now we have two cases again:
     *
     *  1. Device was configured with 'irq?'
     *      In this case we use irq read from the board
     *
     *  2. Device was configured with 'irq xxx'
     *      In this case we set up the board to use specified interrupt
     *
     */
 
    if (is->id_irq == 0)
    {    /* irq? */
       is->id_irq = ( k == 2 ) ? 9 : k;
    }
 
    sc->stat = 0;        /* 16 bit access */
 
    /* By now, the adapter is already activated */
 
    return (EP_IOSIZE);  /* 16 bytes of I/O space used. */
}
 
 
 
/**********************************************************************************
 *
 * DESCRIPTION:
 * This routine attaches this network driver and the network interface routines.
 *
 * RETURNS: 0 - failed to attach
 *                      1 - success
 *
 **********************************************************************************/
static int ep_isa_attach( struct isa_device *is )
{
    struct ep_softc *sc = &ep_softc[ 0 ];
    u_short config;
    int irq;
 
    sc->ep_connectors = 0;
    config = inw( IS_BASE + EP_W0_CONFIG_CTRL );
    if (config & IS_AUI)
    {
           sc->ep_connectors |= AUI;
    }
    if (config & IS_BNC)
    {
           sc->ep_connectors |= BNC;
    }
    if (config & IS_UTP)
    {
           sc->ep_connectors |= UTP;
    }
    if( !(sc->ep_connectors & 7) )
       printf( "no connectors!" );
    sc->ep_connector = inw(BASE + EP_W0_ADDRESS_CFG) >> ACF_CONNECTOR_BITS;
 
    /*
     * Write IRQ value to board
     */
 
    irq = is->id_irq;
        /* update the interrupt line number to registered with kernel */
        sc->irqInfo.name = irq;
 
    GO_WINDOW( 0 );
    SET_IRQ( BASE, irq );
 
    printf( "3C509: I/O=0x%x, IRQ=%d, CONNECTOR=%s, ",
            sc->ep_io_addr, sc->irqInfo.name,ep_conn_type[ sc->ep_connector ] );
 
    ep_attach( sc );
    return 1;
}
 
/**********************************************************************************
 *
 * DESCRIPTION: Completes the initialization/attachement of the driver.
 *
 * RETURNS: 0 - ok.
 *
 **********************************************************************************/
static int ep_attach( struct ep_softc *sc )
{
    u_short *p;
    int i;
 
    /*
     * Setup the station address
     */
    p = (u_short *) &sc->arpcom.ac_enaddr;
    GO_WINDOW(2);
    printf("ADDRESS=" );
    for (i = 0; i < 3; i++)
    {
            p[i] = htons( sc->epb->eth_addr[i] );
        outw( BASE + EP_W2_ADDR_0 + (i * 2), ntohs( p[i] ) );
        printf("%04x ", (u_short)ntohs( p[i] ) );
    }
    printf("\n" );
 
    sc->rx_no_first = sc->rx_no_mbuf =
        sc->rx_bpf_disc = sc->rx_overrunf = sc->rx_overrunl =
        sc->tx_underrun = 0;
 
    ep_fset( F_RX_FIRST );
    sc->top = sc->mcur = 0;
    return 0;
}
 
 
/**********************************************************************************
 *
 * DESCRIPTION:
 * Initializes the card.
 * The order in here seems important. Otherwise we may not receive interrupts. ?!
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static void epinit( struct ep_softc *sc )
{
    register struct ifnet *ifp = &sc->arpcom.ac_if;
    int i, j;
 
    while( inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS ) ;
    GO_WINDOW(0);
    outw(BASE + EP_COMMAND, STOP_TRANSCEIVER);
    GO_WINDOW(4);
    outw(BASE + EP_W4_MEDIA_TYPE, DISABLE_UTP);
    GO_WINDOW(0);
 
    /* Disable the card */
    outw(BASE + EP_W0_CONFIG_CTRL, 0);
 
    /* Enable the card */
    outw(BASE + EP_W0_CONFIG_CTRL, ENABLE_DRQ_IRQ);
 
    GO_WINDOW(2);
 
    /* Reload the ether_addr. */
    for (i = 0; i < 6; i++)
       outb(BASE + EP_W2_ADDR_0 + i, sc->arpcom.ac_enaddr[i]);
 
    outw(BASE + EP_COMMAND, RX_RESET);
    outw(BASE + EP_COMMAND, TX_RESET);
    while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
 
    /* Window 1 is operating window */
    GO_WINDOW(1);
    for (i = 0; i < 31; i++)
       inb(BASE + EP_W1_TX_STATUS);
 
    /* get rid of stray intr's */
    outw(BASE + EP_COMMAND, ACK_INTR | 0xff);
 
    outw(BASE + EP_COMMAND, SET_RD_0_MASK | S_5_INTS);
 
    outw(BASE + EP_COMMAND, SET_INTR_MASK | S_5_INTS);
 
    if (ifp->if_flags & IFF_PROMISC)
           outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL |
                                                            FIL_GROUP | FIL_BRDCST | FIL_ALL);
    else
           outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL | FIL_GROUP | FIL_BRDCST);
 
     /*
      * S.B.
      *
      * Now behavior was slightly changed:
      *
      * if any of flags link[0-2] is used and its connector is
      * physically present the following connectors are used:
      *
      *   link0 - AUI * highest precedence
      *   link1 - BNC
      *   link2 - UTP * lowest precedence
      *
      * If none of them is specified then
      * connector specified in the EEPROM is used
      * (if present on card or AUI if not).
      *
      */
 
    /* Set the xcvr. */
    if (ifp->if_flags & IFF_LINK0 && sc->ep_connectors & AUI)
    {
           i = ACF_CONNECTOR_AUI;
    }
    else if (ifp->if_flags & IFF_LINK1 && sc->ep_connectors & BNC)
    {
           i = ACF_CONNECTOR_BNC;
    }
    else if (ifp->if_flags & IFF_LINK2 && sc->ep_connectors & UTP)
    {
           i = ACF_CONNECTOR_UTP;
    }
    else
    {
           i = sc->ep_connector;
    }
    GO_WINDOW(0);
    j = inw(BASE + EP_W0_ADDRESS_CFG) & 0x3fff;
    outw(BASE + EP_W0_ADDRESS_CFG, j | (i << ACF_CONNECTOR_BITS));
 
    switch(i)
    {
      case ACF_CONNECTOR_UTP:
          if (sc->ep_connectors & UTP)
          {
            GO_WINDOW(4);
            outw(BASE + EP_W4_MEDIA_TYPE, ENABLE_UTP);
          }
          break;
 
      case ACF_CONNECTOR_BNC:
           if (sc->ep_connectors & BNC)
           {
            outw(BASE + EP_COMMAND, START_TRANSCEIVER);
            Wait_X_ms( 1 );
           }
       break;
 
      case ACF_CONNECTOR_AUI:
            /* nothing to do */
                break;
 
      default:
           printf("ep%d: strange connector type in EEPROM: assuming AUI\n", sc->unit);
           break;
    }
 
    outw(BASE + EP_COMMAND, RX_ENABLE);
    outw(BASE + EP_COMMAND, TX_ENABLE);
 
    ifp->if_flags |= IFF_RUNNING;
    ifp->if_flags &= ~IFF_OACTIVE;      /* just in case */
 
 
    sc->rx_no_first = sc->rx_no_mbuf =
        sc->rx_bpf_disc = sc->rx_overrunf = sc->rx_overrunl =
        sc->tx_underrun = 0;
 
    ep_fset(F_RX_FIRST);
    if( sc->top )
    {
           m_freem( sc->top );
           sc->top = sc->mcur = 0;
    }
    outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_INIT_EARLY_THRESH);
    outw(BASE + EP_COMMAND, SET_TX_START_THRESH | 16);
 
    /*
     * Store up a bunch of mbuf's for use later. (MAX_MBS). First we free up
     * any that we had in case we're being called from intr or somewhere
     * else.
     */
 
    GO_WINDOW(1);
}
 
 
static const char padmap[] = {0, 3, 2, 1};
 
/**********************************************************************************
 *
 * DESCRIPTION: Routine to transmit frames to the card.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static void epstart( struct ifnet *ifp )
{
    register struct ep_softc *sc = ifp->if_softc;
    register u_int len;
    register struct mbuf *m;
    struct mbuf *top;
    int pad;
 
    while( inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS )
        ;
startagain:
    /*    printk( "S-" ); */
 
    /* Sneak a peek at the next packet */
    m = ifp->if_snd.ifq_head;
    if (m == 0)
    {
       ifp->if_flags &= ~IFF_OACTIVE;
       return;
    }
 
    for( len = 0, top = m; m; m = m->m_next )
         len += m->m_len;
 
    pad = padmap[ len & 3 ];
 
    /*
     * The 3c509 automatically pads short packets to minimum ethernet length,
     * but we drop packets that are too large. Perhaps we should truncate
     * them instead?
     */
    if( len + pad > ETHER_MAX_LEN )
    {
           /* packet is obviously too large: toss it */
       ++ifp->if_oerrors;
       IF_DEQUEUE( &ifp->if_snd, m );
       m_freem( m );
           goto readcheck;
    }
    if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4)
    {
           /* no room in FIFO */
           outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | (len + pad + 4));
       /* make sure */
           if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4)
           {
               ifp->if_flags |= IFF_OACTIVE;
               return;
           }
    }
    IF_DEQUEUE( &ifp->if_snd, m );
    outw(BASE + EP_W1_TX_PIO_WR_1, len);
    outw(BASE + EP_W1_TX_PIO_WR_1, 0x0);        /* Second dword meaningless */
 
    for (top = m; m != 0; m = m->m_next)
        {
       if( ep_ftst(F_ACCESS_32_BITS ) )
       {
              outsl( BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len / 4 );
              if( m->m_len & 3 )
             outsb(BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t) + (m->m_len & (~3)), m->m_len & 3 );
       }
       else
       {
              outsw( BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len / 2 );
              if( m->m_len & 1 )
                  outb( BASE + EP_W1_TX_PIO_WR_1, *(mtod(m, caddr_t) + m->m_len - 1) );
           }
        }
    while( pad-- )
        {
           outb(BASE + EP_W1_TX_PIO_WR_1, 0);    /* Padding */
        }
    ifp->if_timer = 2;
    ifp->if_opackets++;
    m_freem(top);
 
/*    goto startagain;   */
    /*
     * Is another packet coming in? We don't want to overflow the tiny RX
     * fifo.
     */
readcheck:
    if( inw(BASE + EP_W1_RX_STATUS) & RX_BYTES_MASK )
    {
        /*
         * we check if we have packets left, in that case we prepare to come
         * back later
         */
           if( ifp->if_snd.ifq_head )
           {
              outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | 8);
       }
           return;
    }
    goto startagain;
}
 
 
 
/**********************************************************************************
 *
 * DESCRIPTION: Routine to read frames from the card.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static void epread( register struct ep_softc *sc )
{
    struct ether_header *eh;
    struct mbuf *top, *mcur, *m;
    struct ifnet *ifp;
    int lenthisone;
 
    short rx_fifo2, status;
    register short rx_fifo;
 
    ifp = &sc->arpcom.ac_if;
    status = inw( BASE + EP_W1_RX_STATUS );
 
read_again:
 
    if (status & ERR_RX)
    {
           ++ifp->if_ierrors;
           if( status & ERR_RX_OVERRUN )
           {
            /*
             * we can think the rx latency is actually greather than we
             * expect
             */
            if( ep_ftst(F_RX_FIRST) )
                   sc->rx_overrunf++;
            else
                   sc->rx_overrunl++;
 
           }
           goto out;
    }
    rx_fifo = rx_fifo2 = status & RX_BYTES_MASK;
 
    if( ep_ftst( F_RX_FIRST ) )
    {
           MGETHDR( m, M_DONTWAIT, MT_DATA );
       if( !m )
              goto out;
           if( rx_fifo >= MINCLSIZE )
              MCLGET( m, M_DONTWAIT );
           sc->top = sc->mcur = top = m;
#define EROUND  ((sizeof(struct ether_header) + 3) & ~3)
#define EOFF    (EROUND - sizeof(struct ether_header))
           top->m_data += EOFF;
 
           /* Read what should be the header. */
           insw(BASE + EP_W1_RX_PIO_RD_1, mtod(top, caddr_t), sizeof(struct ether_header) / 2);
           top->m_len = sizeof(struct ether_header);
           rx_fifo -= sizeof(struct ether_header);
           sc->cur_len = rx_fifo2;
    }
    else
    {
           /* come here if we didn't have a complete packet last time */
           top = sc->top;
           m = sc->mcur;
           sc->cur_len += rx_fifo2;
    }
 
    /* Reads what is left in the RX FIFO */
    while (rx_fifo > 0)
    {
           lenthisone = min( rx_fifo, M_TRAILINGSPACE(m) );
           if( lenthisone == 0 )
           {    /* no room in this one */
               mcur = m;
               MGET(m, M_WAIT, MT_DATA);
               if (!m)
                      goto out;
               if (rx_fifo >= MINCLSIZE)
                       MCLGET(m, M_WAIT);
               m->m_len = 0;
               mcur->m_next = m;
               lenthisone = min(rx_fifo, M_TRAILINGSPACE(m));
           }
           if( ep_ftst( F_ACCESS_32_BITS ) )
           { /* default for EISA configured cards*/
              insl( BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len, lenthisone / 4);
              m->m_len += (lenthisone & ~3);
              if (lenthisone & 3)
                     insb(BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len, lenthisone & 3);
              m->m_len += (lenthisone & 3);
            }
            else
            {
              insw(BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len, lenthisone / 2);
              m->m_len += lenthisone;
              if( lenthisone & 1 )
                     *(mtod(m, caddr_t) + m->m_len - 1) = inb(BASE + EP_W1_RX_PIO_RD_1);
           }
           rx_fifo -= lenthisone;
    }
 
    if( status & ERR_RX_INCOMPLETE)
    {   /* we haven't received the complete packet */
            sc->mcur = m;
        sc->rx_no_first++;      /* to know how often we come here */
        ep_frst( F_RX_FIRST );
            if( !((status = inw(BASE + EP_W1_RX_STATUS)) & ERR_RX_INCOMPLETE) )
            {
              /* we see if by now, the packet has completly arrived */
              goto read_again;
            }
            outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_NEXT_EARLY_THRESH);
            return;
    }
    outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
    ++ifp->if_ipackets;
    ep_fset(F_RX_FIRST);
    top->m_pkthdr.rcvif = &sc->arpcom.ac_if;
    top->m_pkthdr.len = sc->cur_len;
 
    eh = mtod(top, struct ether_header *);
    m_adj(top, sizeof(struct ether_header));
    ether_input(ifp, eh, top);
    sc->top = 0;
    while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS)
          ;
    outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_INIT_EARLY_THRESH);
    return;
 
out:
    outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
    if (sc->top)
    {
           m_freem(sc->top);
           sc->top = 0;
       sc->rx_no_mbuf++;
    }
    ep_fset(F_RX_FIRST);
    while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS) ;
    outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_INIT_EARLY_THRESH);
}
 
 
 
/**********************************************************************************
 *
 * DESCRIPTION:
 * This routine handles interrupts. It is called from the "RX" task whenever
 * the ISR post an event to the task.
 * This is basically the "isr" from the FreeBSD driver.
 *
 * RETURNS: nothing.
 *
 **********************************************************************************/
static void ep_intr( struct ep_softc *sc )
{
  register int status;
  struct ifnet *ifp;
  ifp = &sc->arpcom.ac_if;
 
rescan:
 
  /*  printk( "I-" ); */
  while( ( status = inw(BASE + EP_STATUS)) & S_5_INTS )
  {
        /* first acknowledge all interrupt sources */
    outw( BASE + EP_COMMAND, ACK_INTR | ( status & S_MASK ) );
 
        if( status & ( S_RX_COMPLETE | S_RX_EARLY ) )
        {
            epread( sc );
            continue;
        }
        if (status & S_TX_AVAIL)
        {
            /* we need ACK */
            ifp->if_timer = 0;
            ifp->if_flags &= ~IFF_OACTIVE;
            GO_WINDOW(1);
            inw(BASE + EP_W1_FREE_TX);
            epstart(ifp);
        }
        if (status & S_CARD_FAILURE)
        {
            ifp->if_timer = 0;
            printf("\nep%d:\n\tStatus: %x\n", sc->unit, status);
            GO_WINDOW(4);
            printf("\tFIFO Diagnostic: %x\n", inw(BASE + EP_W4_FIFO_DIAG));
            printf("\tStat: %x\n", sc->stat);
            printf("\tIpackets=%ld, Opackets=%ld\n", ifp->if_ipackets, ifp->if_opackets);
            printf("\tNOF=%d, NOMB=%d, BPFD=%d, RXOF=%d, RXOL=%d, TXU=%d\n",
                   sc->rx_no_first, sc->rx_no_mbuf, sc->rx_bpf_disc, sc->rx_overrunf,
                   sc->rx_overrunl, sc->tx_underrun);
 
            printf("ep%d: Status: %x (input buffer overflow)\n", sc->unit, status);
            ++ifp->if_ierrors;
            epinit(sc);
            return;
        }
        if (status & S_TX_COMPLETE)
        {
            ifp->if_timer = 0;
            /* we  need ACK. we do it at the end */
            /*
             * We need to read TX_STATUS until we get a 0 status in order to
             * turn off the interrupt flag.
             */
            while ((status = inb(BASE + EP_W1_TX_STATUS)) & TXS_COMPLETE)
            {
                   if (status & TXS_SUCCES_INTR_REQ)
                        ;
                   else if( status & (TXS_UNDERRUN | TXS_JABBER | TXS_MAX_COLLISION ) )
                   {
                      outw(BASE + EP_COMMAND, TX_RESET);
                      if (status & TXS_UNDERRUN)
                      {
                             sc->tx_underrun++;
                      }
                      else
                      {
                              if( status & TXS_JABBER )
                                   ;
                          else  /* TXS_MAX_COLLISION - we shouldn't get here */
                                   ++ifp->if_collisions;
                      }
                      ++ifp->if_oerrors;
                      outw(BASE + EP_COMMAND, TX_ENABLE);
                     /*
                      * To have a tx_avail_int but giving the chance to the
                      * Reception
                      */
                      if( ifp->if_snd.ifq_head )
                      {
                             outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | 8);
                      }
                   }
                   outb( BASE + EP_W1_TX_STATUS, 0x0 ); /* pops up the next status */
            } /* while */
            ifp->if_flags &= ~IFF_OACTIVE;
            GO_WINDOW(1);
            inw(BASE + EP_W1_FREE_TX);
            epstart( ifp );
        }  /* end TX_COMPLETE */
  }
  outw(BASE + EP_COMMAND, C_INTR_LATCH);        /* ACK int Latch */
  if( (status = inw(BASE + EP_STATUS) ) & S_5_INTS )
      goto rescan;
 
  /* re-enable Ints */
  outw( BASE + EP_COMMAND, SET_INTR_MASK | S_5_INTS );
  /* printk( "I+" ); */
}
Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [i386/] [pc386/] [3c509/] [3c509.c] - Blame information for rev 389

Line No.	Rev	Author	Line
1	30	unneback	`/**********************************************************************************`
2			`* $Header: /home/marcus/revision_ctrl_test/oc_cvs/cvs/or1k/rtems/c/src/lib/libbsp/i386/pc386/3c509/3c509.c,v 1.2 2001-09-27 11:59:47 chris Exp $`
3			`*`
4			`* Ported by Rosimildo da Silva.`
5			`* ConnectTel,Inc.`
6			`* e-mail: rdasilva@connecttel.com`
7			`*`
8			`* MODULE DESCRIPTION:`
9			`* RTEMS driver for 3COM 3C509 Ethernet Card.`
10			`* The driver has been tested on PC with a single network card.`
11			`*`
12			`*`
13			`* This driver was based on the FreeBSD implementation( if_ep.c ) of the 3c5x9`
14			`* family and on the network framework of the RTEMS network driver.`
15			`* ( WD80x3 by Eric Norum ).`
16			`* See notes below:`
17			`*`
18			`******************************************************************************`
19			`* Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>`
20			`* All rights reserved.`
21			`*`
22			`* Redistribution and use in source and binary forms, with or without`
23			`* modification, are permitted provided that the following conditions`
24			`* are met:`
25			`* 1. Redistributions of source code must retain the above copyright`
26			`* notice, this list of conditions and the following disclaimer.`
27			`* 2. Redistributions in binary form must reproduce the above copyright`
28			`* notice, this list of conditions and the following disclaimer in the`
29			`* documentation and/or other materials provided with the distribution.`
30			`* 3. All advertising materials mentioning features or use of this software`
31			`* must display the following acknowledgement:`
32			`* This product includes software developed by Herb Peyerl.`
33			`* 4. The name of Herb Peyerl may not be used to endorse or promote products`
34			`* derived from this software without specific prior written permission.`
35			`*`
36			* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
37			`* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES`
38			`* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.`
39			`* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,`
40			`* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT`