URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [i960/] [cvme961/] [include/] [bsp.h] - Blame information for rev 173

Details | Compare with Previous | View Log


/*  bsp.h
 *
 *  This include file contains some definitions specific to the
 *  Cyclone CVME960 and CVME961 boards.  These boards are the
 *  same except the 960 uses SRAM and the 961 DRAM.
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  $Id: bsp.h,v 1.2 2001-09-27 11:59:56 chris Exp $
 */
 
#ifndef __CVME961_h
#define __CVME961_h
 
#ifdef __cplusplus
extern "C" {
#endif
 
#include <rtems.h>
#include <iosupp.h>
#include <console.h>
#include <clockdrv.h>
 
/*
 *  confdefs.h overrides for this BSP:
 *   - number of termios serial ports (defaults to 1)
 *   - Interrupt stack space is not minimum if defined.
 */
 
/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
#define CONFIGURE_INTERRUPT_STACK_MEMORY  (4 * 1024)
 
/*
 *  Define the time limits for RTEMS Test Suite test durations.
 *  Long test and short test duration limits are provided.  These
 *  values are in seconds and need to be converted to ticks for the
 *  application.
 *
 */
 
#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
 
/*
 *  Define the interrupt mechanism for Time Test 27
 *
 *  NOTE: Following are for i960CA and are board independent
 *
 */
 
#define MUST_WAIT_FOR_INTERRUPT 0
 
#define Install_tm27_vector( handler ) set_vector( (handler), 6, 1 )
 
#define Cause_tm27_intr()  i960_cause_intr( 0x62 )
 
#define Clear_tm27_intr()  i960_clear_intr( 6 )
 
#define Lower_tm27_intr()
 
/*
 *  Simple spin delay in microsecond units for device drivers.
 *  This is very dependent on the clock speed of the target.
 */
 
#define delay( microseconds ) \
  { register rtems_unsigned32 _delay=(microseconds); \
    register rtems_unsigned32 _tmp = 0; /* initialized to avoid warning */ \
    asm volatile( "0: \
                     remo      3,31,%0 ; \
                     cmpo      0,%0 ; \
                     subo      1,%1,%1 ; \
                     cmpobne.t 0,%1,0b " \
                  : "=d" (_tmp), "=d" (_delay) \
                  : "0"  (_tmp), "1"  (_delay) ); \
  }
 
/* Constants */
 
#define RAM_START 0
#define RAM_END   0x100000
 
/* NINDY console I/O requests:
 *   CO sends a single character to stdout,
 *   CI reads one.
 */
 
#define NINDY_INPUT   0
#define NINDY_OUTPUT  1
 
/*
 *  get_prcb
 *
 *  Returns the PRCB pointer.
 */
 
static inline i960ca_PRCB *get_prcb( void )
{
  register i960ca_PRCB *_prcb = 0;
 
  asm volatile( "calls 5; \
                 mov   g0,%0" \
                 : "=d" (_prcb) \
                 : "0" (_prcb) );
  return ( _prcb );
}
 
#ifdef C961_INIT
#undef BSP_EXTERN
#define BSP_EXTERN
#else
#undef BSP_EXTERN
#define BSP_EXTERN extern
#endif
 
/* miscellaneous stuff assumed to exist */
 
extern rtems_configuration_table BSP_Configuration;
 
BSP_EXTERN i960ca_PRCB           *Prcb;
BSP_EXTERN i960ca_control_table  *Ctl_tbl;
 
/*
 *  Device Driver Table Entries
 */
 
/*
 * NOTE: Use the standard Console driver entry
 */
 
/*
 * NOTE: Use the standard Clock driver entry
 */
 
/* functions */
 
void bsp_cleanup( void );
 
i960_isr_entry set_vector( rtems_isr_entry, unsigned int, unsigned int );
 
#ifdef __cplusplus
}
#endif
 
#endif
/* end of include file */

Line No.	Rev	Author	Line
1	30	unneback	`/* bsp.h`
2			`*`
3			`* This include file contains some definitions specific to the`
4			`* Cyclone CVME960 and CVME961 boards. These boards are the`
5			`* same except the 960 uses SRAM and the 961 DRAM.`
6			`*`
7			`* COPYRIGHT (c) 1989-1999.`
8			`* On-Line Applications Research Corporation (OAR).`
9			`*`
10			`* The license and distribution terms for this file may be`
11			`* found in the file LICENSE in this distribution or at`
12			`* http://www.OARcorp.com/rtems/license.html.`
13			`*`
14			`* $Id: bsp.h,v 1.2 2001-09-27 11:59:56 chris Exp $`
15			`*/`
16
17			`#ifndef __CVME961_h`
18			`#define __CVME961_h`
19
20			`#ifdef __cplusplus`
21			`extern "C" {`
22			`#endif`
23
24			`#include <rtems.h>`
25			`#include <iosupp.h>`
26			`#include <console.h>`
27			`#include <clockdrv.h>`
28
29			`/*`
30			`* confdefs.h overrides for this BSP:`
31			`* - number of termios serial ports (defaults to 1)`
32			`* - Interrupt stack space is not minimum if defined.`
33			`*/`
34
35			`/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */`
36			`#define CONFIGURE_INTERRUPT_STACK_MEMORY (4 * 1024)`
37
38			`/*`
39			`* Define the time limits for RTEMS Test Suite test durations.`
40			`* Long test and short test duration limits are provided. These`
41			`* values are in seconds and need to be converted to ticks for the`
42			`* application.`
43			`*`
44			`*/`
45
46			`#define MAX_LONG_TEST_DURATION 300 /* 5 minutes = 300 seconds */`
47			`#define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */`
48
49			`/*`
50			`* Define the interrupt mechanism for Time Test 27`
51			`*`
52			`* NOTE: Following are for i960CA and are board independent`
53			`*`
54			`*/`
55
56			`#define MUST_WAIT_FOR_INTERRUPT 0`
57
58			`#define Install_tm27_vector( handler ) set_vector( (handler), 6, 1 )`
59
60			`#define Cause_tm27_intr() i960_cause_intr( 0x62 )`
61
62			`#define Clear_tm27_intr() i960_clear_intr( 6 )`
63
64			`#define Lower_tm27_intr()`
65
66			`/*`
67			`* Simple spin delay in microsecond units for device drivers.`
68			`* This is very dependent on the clock speed of the target.`
69			`*/`
70
71			`#define delay( microseconds ) \`
72			`{ register rtems_unsigned32 _delay=(microseconds); \`
73			`register rtems_unsigned32 _tmp = 0; /* initialized to avoid warning */ \`
74			`asm volatile( "0: \`
75			`remo 3,31,%0 ; \`
76			`cmpo 0,%0 ; \`
77			`subo 1,%1,%1 ; \`
78			`cmpobne.t 0,%1,0b " \`
79			`: "=d" (_tmp), "=d" (_delay) \`
80			`: "0" (_tmp), "1" (_delay) ); \`
81			`}`
82
83			`/* Constants */`
84
85			`#define RAM_START 0`
86			`#define RAM_END 0x100000`
87
88			`/* NINDY console I/O requests:`
89			`* CO sends a single character to stdout,`
90			`* CI reads one.`
91			`*/`
92
93			`#define NINDY_INPUT 0`
94			`#define NINDY_OUTPUT 1`
95
96			`/*`
97			`* get_prcb`
98			`*`
99			`* Returns the PRCB pointer.`
100			`*/`
101
102			`static inline i960ca_PRCB *get_prcb( void )`
103			`{`
104			`register i960ca_PRCB *_prcb = 0;`
105
106			`asm volatile( "calls 5; \`
107			`mov g0,%0" \`
108			`: "=d" (_prcb) \`
109			`: "0" (_prcb) );`
110			`return ( _prcb );`
111			`}`
112
113			`#ifdef C961_INIT`
114			`#undef BSP_EXTERN`
115			`#define BSP_EXTERN`
116			`#else`
117			`#undef BSP_EXTERN`
118			`#define BSP_EXTERN extern`
119			`#endif`
120
121			`/* miscellaneous stuff assumed to exist */`
122
123			`extern rtems_configuration_table BSP_Configuration;`
124
125			`BSP_EXTERN i960ca_PRCB *Prcb;`
126			`BSP_EXTERN i960ca_control_table *Ctl_tbl;`
127
128			`/*`
129			`* Device Driver Table Entries`
130			`*/`
131
132			`/*`
133			`* NOTE: Use the standard Console driver entry`
134			`*/`
135
136			`/*`
137			`* NOTE: Use the standard Clock driver entry`
138			`*/`
139
140			`/* functions */`
141
142			`void bsp_cleanup( void );`
143
144			`i960_isr_entry set_vector( rtems_isr_entry, unsigned int, unsigned int );`
145
146			`#ifdef __cplusplus`
147			`}`
148			`#endif`
149
150			`#endif`
151			`/* end of include file */`

Browse

Tools

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [i960/] [cvme961/] [include/] [bsp.h] - Blame information for rev 173