Subversion Repositories openrisc

/*

 *  Header file for console driver

 *  defines for accessing M68340/68349 UART registers

 *

 *  Author:

 *  Geoffroy Montel

 *  France Telecom - CNET/DSM/TAM/CAT

 *  4, rue du Clos Courtel

 *  35512 CESSON-SEVIGNE

 *  FRANCE

 *

 *  e-mail: g_montel@yahoo.com

 *

 *

 *  COPYRIGHT (c) 1989-1999.

 *  On-Line Applications Research Corporation (OAR).

 *

 *  The license and distribution terms for this file may be

 *  found in the file LICENSE in this distribution or at

 *

 *  http://www.OARcorp.com/rtems/license.html.

 *

 *  $Id: m340uart.h,v 1.2 2001-09-27 12:00:07 chris Exp $

 */

#ifndef __m340uart_H__

#define __m340uart_H__

/* UART initialisation */

#define UART_CHANNEL_A                  0

#define UART_CHANNEL_B                  1

#define UART_NUMBER_OF_CHANNELS         2

#define UART_CONSOLE_NAME               "/dev/console"

#define UART_RAW_IO_NAME                "/dev/tty1"

#define UART_FIFO_FULL                  0

#define UART_CRR                        1

#define UART_INTERRUPTS                 0

#define UART_POLLING                    1

#define UART_TERMIOS_CONSOLE            0

#define UART_TERMIOS_RAW                1

#define UART_TERMIOS_MIN_DEFAULT        1

#define UART_TERMIOS_TIME_DEFAULT       0

void Init_UART_Table(void);

typedef struct {

                rtems_unsigned8         enable;

                rtems_unsigned16        rx_buffer_size; /* NOT IMPLEMENTED */

                rtems_unsigned16        tx_buffer_size; /* NOT IMPLEMENTED */

               } uart_termios_config;

typedef struct { /* for one channel */

                rtems_unsigned8         enable;         /* use this channel */

                char                    name[64];       /* use UART_CONSOLE_NAME for console purpose */

                rtems_unsigned8         parity_mode;    /* parity mode, see MR1 section for defines */

                rtems_unsigned8         bits_per_char;  /* bits per character, see MR1 section for defines  */

                float                   rx_baudrate;    /* Rx baudrate */

                float                   tx_baudrate;    /* Tx baudrate */

                rtems_unsigned8         rx_mode;        /* FIFO Full (UART_FIFO_FULL) or ChannelReceiverReady (UART_CRR) */

                rtems_unsigned8         mode;           /* use interrupts (UART_INTERRUPTS) or polling (UART_POLLING) */

                uart_termios_config     termios;

               } uart_channel_config;

extern uart_channel_config              m340_uart_config[UART_NUMBER_OF_CHANNELS];

typedef  struct {

                 int    set;    /* number of the m340 baud speed set */

                 int    rcs;    /* RCS for the needed baud set */

                 int    tcs;    /* TCS for the needed baud set */

                } t_baud_speed;

typedef  struct {

                 t_baud_speed   baud_speed_table[2];

                 short          nb;

                } t_baud_speed_table;

extern t_baud_speed_table

Find_Right_m340_UART_Config(float ChannelA_ReceiverBaudRate, float ChannelA_TransmitterBaudRate, rtems_unsigned8 enableA,

                            float ChannelB_ReceiverBaudRate, float ChannelB_TransmitterBaudRate, rtems_unsigned8 enableB);

extern rtems_isr InterruptHandler (rtems_vector_number v);

extern float termios_baud_rates_equivalence ( int speed ) ;

extern int dbugRead (int minor);

extern int dbugWrite (int minor, const char *buf, int len);

extern float m340_Baud_Rates_Table[16][2];

/*  SR */

#define m340_Rx_RDY             1

#define m340_FFULL              (1<<1)

#define m340_Tx_RDY             (1<<2)

#define m340_TxEMP              (1<<3)

#define m340_OE                 (1<<4)

#define m340_PE                 (1<<5)

#define m340_FE                 (1<<6)

#define m340_RB                 (1<<7)

/*  IER */

#define m340_TxRDYA             1

#define m340_RxRDYA             (1<<1)

#define m340_TxRxRDYA           0x3

#define m340_TxRDYB             (1<<4)

#define m340_RxRDYB             (1<<5)

#define m340_TxRxRDYB           0x30

/*  CR */

#define m340_Reset_Error_Status 0x40

#define m340_Reset_Receiver     0x20

#define m340_Reset_Transmitter  0x30

#define m340_Transmitter_Enable (1<<2)

#define m340_Receiver_Enable    1

#define m340_Transmitter_Disable (2<<2)

#define m340_Receiver_Disable   2

/*  ACR */

#define m340_BRG_Set1           0

#define m340_BRG_Set2           (1<<7)

/*  OPCR */

#define m340_OPCR_Gal           0x0

#define m340_OPCR_Aux           0xFF

/*  ISR */

#define m340_COS                (1<<7)

#define m340_DBB                (1<<6)

#define m340_XTAL_RDY           (1<<3)

#define m340_DBA                (1<<2)

/*  MR1 */

#define m340_RxRTS              (1<<7)

#define m340_R_F                (1<<6)          /* character or block mode */

#define m340_ERR                (1<<5)

#define m340_RxRTX              (1<<7)

#define m340_Even_Parity        0

#define m340_Odd_Parity         (1<<2)

#define m340_Low_Parity         (2<<2)

#define m340_High_Parity        (3<<2)

#define m340_No_Parity          (4<<2)

#define m340_Data_Character     (6<<2)

#define m340_Address_Character  (7<<2)

#define m340_5bpc               0x0

#define m340_6bpc               0x1

#define m340_7bpc               0x2

#define m340_8bpc               0x3

/*  MR2 */

#define m340_normal             (0<<6)

#define m340_automatic_echo     (1<<6)

#define m340_local_loopback     (2<<6)

#define m340_remote_loopback    (3<<6)

#define m340_TxRTS              (1<<5)

#define m340_TxCTS              (1<<4)

/* Baud rates for Transmitter/Receiver */

#define SCLK    1               /* put your own SCLK value here */

#endif